Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
International Journal on Interactive Design and Manufacturing (IJIDeM)

01-05-2024 | Review

Application of cold spray technology in design and manufacturing of complex geometries

Authors: Amrinder Mehta, Hitesh Vasudev, Lalit Thakur

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM)

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Cold spray technology is a multifaceted, environmentally friendly, and very promising method utilised for the aim of applying coatings onto complex geometries. This research examines several challenges pertaining to cold spray coating that have the potential to restrict its practical application. The application of this methodology enhances the depth of understanding of the fundamental process, allows for precise control of coating properties, and supports the refinement of cold spray treatments. Furthermore, it exhibits the supplementary benefit of being environmentally friendly because of its eradication of hazardous emissions and utilisation of flame. Moreover, the application of gas-turbine-driven cold spray equipment provides improved accuracy in controlling the coating thickness. Additionally, it has the capability to be combined with other methods such as laser cladding and thermal spraying to enhance its overall efficiency.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Ghelichi, R., Bagherifard, S., Guagliano, M., Verani, M.: Numerical simulation of cold spray coating. Surf. Coat. Technol. 205, 5294–5301 (2011)CrossRef
2.
Fardan, A., Berndt, C.C., Ahmed, R.J.S., Technology, C.: Numerical modelling of particle impact and residual stresses in cold sprayed coatings: a review. Surf. Coat. Technol. 409, 126835 (2021)CrossRef
3.
4.
Marrocco, T., McCartney, D., Shipway, P., Sturgeon, A.: Production of titanium deposits by cold-gas dynamic spray: numerical modeling and experimental characterization. J. Therm. Spray Technol. 15, 263–272 (2006)CrossRef
5.
Sova, A., Okunkova, A., Grigoriev, S., Smurov, I.: Velocity of the particles accelerated by a cold spray micronozzle: experimental measurements and numerical simulation. J. Therm. Spray Technol. 22, 75–80 (2013)CrossRef
6.
Chakrabarty, R., Song, J.: A modified Johnson-Cook material model with strain gradient plasticity consideration for numerical simulation of cold spray process. Surf. Coat. Technol. 397, 125981 (2020)CrossRef
7.
Song, X., Everaerts, J., Zhai, W., Zheng, H., Tan, A.W.Y., Sun, W., et al.: Residual stresses in single particle splat of metal cold spray process–Numerical simulation and direct measurement. Mater. Lett. 230, 152–156 (2018)CrossRef
8.
Zehtabi, N.P., ArdeshiriLordejani, A., Guagliano, M., Bagherifard, S.: Numerical simulation of cold spray bonding for CrFeNi medium-entropy alloy. Adv. Eng. Mater. 24, 2200603 (2022)CrossRef
9.
10.
Liao, T.-Y., Biesiekierski, A., Berndt, C.C., King, P.C., Ivanova, E.P., Thissen, H., et al.: Multifunctional cold spray coatings for biological and biomedical applications: A review. Prog. Surf. Sci. 97, 100654 (2022)CrossRef
11.
Chakrabarty, R., Song, J.: Numerical modeling of fracture in ceramic micro-particles and insights on ceramic retention during composite cold spray process. Surf. Coat. Technol. 409, 126830 (2021)CrossRef
12.
Huang, G., Gu, D., Li, X., Xing, L., Wang, H.: Numerical simulation on syphonage effect of laval nozzle for low pressure cold spray system. Remote Sens. Environ. 214, 2497–2504 (2014)
13.
Li, W.-Y., Liao, H., Li, C.-J., Bang, H.-S., Coddet, C.: Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying. Appl. Surf. Sci. 253, 5084–5091 (2007)CrossRef
14.
Pasandideh-Fard, M., Mostaghimi, J., Chandra, S.: Numerical simulation of thermal spray coating formation. pp. 125–134. ITSC 2000: ASM International (2000)
15.
Sayyar, Z., Shahrouzi, J.R., Babaluo, A.A.: Experimental studies and numerical simulation of cold spray technique to investigate the effect of operating parameters on the thickness of Fe/TiO2 self-cleaning film. Powder Technol. 403, 117320 (2022)CrossRef
16.
Carlone, P., Astarita, A., Rubino, F., Pasquino, N., Aprea, P.: Selective laser treatment on cold-sprayed titanium coatings: numerical modeling and experimental analysis. Metall. Mater. Trans. B 47, 3310–3317 (2016)CrossRef
17.
Cao, C., Li, W., Zhang, Z., Yang, X., Xu, Y.: Cold spray additive manufacturing of Ti6Al4V: special nozzle design using numerical simulation and experimental validation. Coatings 12, 210 (2022)CrossRef
18.
Wan, W., Li, W., Wu, D., Qi, Z., Zhang, Z.: New insights into the effects of powder injector inner diameter and overhang length on particle accelerating behavior in cold spray additive manufacturing by numerical simulation. Surf. Coat. Technol. 444, 128670 (2022)CrossRef
19.
Behera, A.K., Mantry, S., Roy, S., Pati, S.: Numerical simulation of cold-sprayed hydroxyapatite coating on 316L stainless steel. Finite Elem. Anal. Des. 226, 104020 (2023)CrossRef
20.
Weiller, S., Delloro, F.: A numerical study of pore formation mechanisms in aluminium cold spray coatings. Addit. Manuf. 60, 103193 (2022)
21.
Karimi, M., Fartaj, A., Rankin, G., Vanderzwet, D., Birtch, W., Villafuerte, J.: Numerical simulation of the cold gas dynamic spray process. J. Therm. Spray Technol. 15, 518–523 (2006)CrossRef
22.
Li, W.-Y., Zhang, C., Guo, X., Zhang, G., Liao, H., Li, C.-J., et al.: Effect of standoff distance on coating deposition characteristics in cold spraying. Mater. Des. 29, 297–304 (2008)CrossRef
23.
Huang, G., Wang, H., Li, X., Xing, L.: Study on the growth of holes in cold spraying via numerical simulation and experimental methods. Coatings 7, 2 (2016)CrossRef
24.
Tang, W., Zhang, J., Li, Y., Yu, B., Zhao, J.: Numerical simulation of the cold spray deposition of copper particles on polyether ether ketone (PEEK) substrate. J. Therm. Spray Technol. 30, 1792–1809 (2021)CrossRef
25.
Li, W.-Y., Liao, H., Wang, H.-T., Li, C.-J., Zhang, G., Coddet, C.: Optimal design of a convergent-barrel cold spray nozzle by numerical method. Appl. Surf. Sci. 253, 708–713 (2006)CrossRef
26.
Xie, J., Nelias, D., Walter-le Berre, H., Ichikawa, Y., Ogawa, K.: Numerical simulation of the cold spray deposition process for aluminium and copper. Engineering Systems Design and Analysis, pp. 109–111. American Society of Mechanical Engineers (2012)
27.
Chen, C., Xie, Y., Verdy, C., Huang, R., Liao, H., Ren, Z., et al.: Numerical investigation of transient coating build-up and heat transfer in cold spray. Surf. Coat. Technol. 326, 355–365 (2017)CrossRef
28.
Ajdelsztajn, L., Schoenung, J.M., Jodoin, B., Kim, G.E.: Cold spray deposition of nanocrystalline aluminum alloys. Metall. Mater. Trans. A 36, 657–666 (2005)CrossRef
29.
Koivuluoto, H., Coleman, A., Murray, K., Kearns, M., Vuoristo, P.: High pressure cold sprayed (HPCS) and low pressure cold sprayed (LPCS) coatings prepared from OFHC Cu feedstock: overview from powder characteristics to coating properties. J. Therm. Spray Technol. 21, 1065–1075 (2012)CrossRef
30.
Vucko, M.J., King, P.C., Poole, A.J., Carl, C., Jahedi, M.Z., de Nys, R.: Cold spray metal embedment: an innovative antifouling technology. Biofouling 28, 239–248 (2012)CrossRef
31.
Oyinbo, S.T., Jen, T.-C.: Feasibility of numerical simulation methods on the Cold Gas Dynamic Spray (CGDS) Deposition process for ductile materials. Manuf. Rev. 7, 24 (2020)
32.
Sova, A., Smurov, I., Doubenskaia, M., Petrovskiy, P.: Deposition of aluminum powder by cold spray micronozzle. Int. J. Adv. Manuf. Technol. 95, 3745–3752 (2018)CrossRef
33.
Viscusi, A., Bruno, M., Esposito, L., Testa, G.: An experimental/numerical study of bonding mechanism in cold spray technology for metals. Int. J. Adv. Manuf. Technol. 110, 2787–2800 (2020)CrossRef
34.
Kotoban, D., Grigoriev, S., Okunkova, A., Sova, A.: Influence of a shape of single track on deposition efficiency of 316L stainless steel powder in cold spray. Surf. Coat. Technol. 309, 951–958 (2017)CrossRef
35.
Arabgol, Z., Assadi, H., Schmidt, T., Gärtner, F., Klassen, T.: Analysis of thermal history and residual stress in cold-sprayed coatings. J. Therm. Spray Technol. 23, 84–90 (2014)CrossRef
36.
Shayegan, G., Mahmoudi, H., Ghelichi, R., Villafuerte, J., Wang, J., Guagliano, M., et al.: Residual stress induced by cold spray coating of magnesium AZ31B extrusion. Mater. Des. 60, 72–84 (2014)CrossRef
37.
Wang, Q., Zhang, M.X.: Review on recent research and development of cold spray technologies. Key Eng. Mater. 533, 1–52 (2013)CrossRef
38.
Chandra, S., Fauchais, P.: Formation of solid splats during thermal spray deposition. J. Therm. Spray Technol. 18, 148–180 (2009)CrossRef
39.
Gao, X., Li, C., Han, X., Chen, X., Zhao, X.: Numerical simulation and parameter sensitivity analysis of multi-particle deposition behavior in HVAF spraying. Surf. Coat. Technol. 441, 128569 (2022)CrossRef
40.
Abubakar, A.A., Arif, A.F.M., Al-Athel, K.S., Akhtar, S.S., Mostaghimi, J.: Modeling residual stress development in thermal spray coatings: current status and way forward. J. Therm. Spray Technol. 26, 1115–1145 (2017)CrossRef
41.
Zhu, W., Zhang, X., Zhang, M., Tian, X., Li, D.: Integral numerical modeling of the deposition profile of a cold spraying process as an additive manufacturing technology. Progr. Addit. Manuf. 4, 357–370 (2019)CrossRef
42.
Moonga, K.H., Jen, T.: Film surface characterization in cold spray using advanced numerical modeling and simulation techniques. Int. J. Mech. Eng. Robot. Res. 7(1), 66–71 (2018)
43.
Yin, S., He, P., Liao, H., Wang, X.: Deposition features of Ti coating using irregular powders in cold spray. J. Therm. Spray Technol. 23, 984–990 (2014)CrossRef
44.
Li, W., Zhang, D., Huang, C., Yin, S., Yu, M., Wang, F., et al.: Modelling of impact behaviour of cold spray particles. Surf. Eng. 30, 299–308 (2014)CrossRef
45.
Yuan, X., Wang, H., Hou, G., Zha, B.: Numerical modeling of a low temperature high velocity air fuel spraying process with injection of liquid and metal particles. J. Therm. Spray Technol. 15, 413–421 (2006)CrossRef
46.
Wu, N.-C., Yang, F., Sun, W.-H., Yang, G., Liang, Y., Zhang, S.-D., et al.: In-flight oxidation of Fe-based amorphous particle during HVAF spraying: numerical simulation and experiment. J. Therm. Spray Technol. 32, 2187–2201 (2023)CrossRef
47.
Tsaknopoulos, K., Grubbs, J., Siopis, M., Nardi, A., Cote, D.: Microstructure and mechanical property evaluation of aluminum F357 powder for cold spray applications. J. Therm. Spray Technol. 30, 643–654 (2021)CrossRef
48.
Garmeh, S., Jadidi, M., Dolatabadi, A.: Three-dimensional modeling of cold spray for additive manufacturing. J. Therm. Spray Technol. 29, 38–50 (2020)CrossRef
49.
Gu, S., Kamnis, S.: Numerical modelling of in-flight particle dynamics of non-spherical powder. Surf. Coat. Technol. 203, 3485–3490 (2009)CrossRef
50.
Xie, J., Nelias, D., Walter-Le Berre, H., Ito, K., Ichikawa, Y., Ogawa, K.: Numerical modeling for cold sprayed particle deposition. In 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum, pp. 4–6. (2013)
51.
Nélias, D., Xie, J., Walter‐Le Berre, H., Ichikawa, Y., Ogawa. K.: Simulation of the cold spray deposition process for aluminum and copper using Lagrangian, ALE and CEL methods. Thermomechanical Industrial Processes: Modeling Numerical Simulation, pp. 321–358. (2014)
52.
Li, W.-Y., Liao, H., Douchy, G., Coddet, C.: Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder. Mater. Des. 28, 2129–2137 (2007)CrossRef
53.
Kiselev, S., Kiselev, V., Klinkov, S., Kosarev, V., Zaikovskii, V.: Study of the gas-particle radial supersonic jet in the cold spraying. Surf. Coat. Technol. 313, 24–30 (2017)CrossRef
54.
Maestracci, R., Sova, A., Jeandin, M., Malhaire, J.-M., Movchan, I., Bertrand, P., et al.: Deposition of composite coatings by cold spray using stainless steel 316L, copper and Tribaloy T-700 powder mixtures. Surf. Coat. Technol. 287, 1–8 (2016)CrossRef
55.
Bashirzadeh, M., Azarmi, F., Leither, C., Karami, G.: Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique. Appl. Surf. Sci. 275, 208–216 (2013)CrossRef
56.
Hussain, T.: Cold spraying of titanium: a review of bonding mechanisms, microstructure and properties. Key Eng. Mater. 533, 53–90 (2013)CrossRef
57.
Li, C.-J., Li, W.-Y., Liao, H.: Examination of the critical velocity for deposition of particles in cold spraying. J. Therm. Spray Technol. 15, 212–222 (2006)CrossRef
58.
Zhang, Y., Li, W., Zhang, C., Liao, H., Zhang, Y., Deng, S.: A spherical surface coating thickness model for a robotized thermal spray system. Robot. Comput.-Integr. Manuf. 59, 297–304 (2019)CrossRef
59.
Suo, X., Yin, S., Planche, M.-P., Liu, T., Liao, H.: Strong effect of carrier gas species on particle velocity during cold spray processes. Surf. Coat. Technol. 268, 90–93 (2015)CrossRef
60.
Luzin, V., Spencer, K., Zhang, M.-X.: Residual stress and thermo-mechanical properties of cold spray metal coatings. Acta Mater. 59, 1259–1270 (2011)CrossRef
61.
Grigoriev, S., Okunkova, A., Sova, A., Bertrand, P., Smurov, I.: Cold spraying: from process fundamentals towards advanced applications. Surf. Coat. Technol. 268, 77–84 (2015)CrossRef
62.
Sudhan, K.H., Prasad, G.K., Kothurkar, N.K., Srikrishnan, A.: Studies on supersonic cold spray deposition of microparticles using a bell-type nozzle. Surf. Coat. Technol. 383, 125244 (2020)CrossRef
63.
Singhal, C., Murtaza, Q.: Simulation of critical velocity of cold spray process with different turbulence models. Mater. Today Proc. 5, 17371–17379 (2018)CrossRef
64.
Wu, H., Xie, X., Liu, M., Chen, C., Liao, H., Zhang, Y., et al.: A new approach to simulate coating thickness in cold spray. Surf. Coat. Technol. 382, 125151 (2020)CrossRef
65.
Assadi, H., Kreye, H., Gärtner, F., Klassen, T.: Cold spraying–a materials perspective. Acta Mater. 116, 382–407 (2016)CrossRef
66.
Lin, E., Nault, I., Ozdemir, O.C., Champagne, V.K., Nardi, A., Müftü, S.: Thermo-mechanical deformation history and the residual stress distribution in cold spray. J. Therm. Spray Technol. 29, 1424–1436 (2020)CrossRef
67.
Huang, R., Fukanuma, H.: Study of the influence of particle velocity on adhesive strength of cold spray deposits. J. Therm. Spray Technol. 21, 541–549 (2012)CrossRef
68.
Blochet, Q., Delloro, F., Nguyen, F., Jeulin, D., Borit, F., Jeandin, M.: Effect of the cold-sprayed aluminum coating-substrate interface morphology on bond strength for aircraft repair application. J. Therm. Spray Technol. 26, 671–686 (2017)CrossRef
69.
Li, C.-J., Wang, H.-T., Zhang, Q., Yang, G.-J., Li, W.-Y., Liao, H.: Influence of spray materials and their surface oxidation on the critical velocity in cold spraying. J. Therm. Spray Technol. 19, 95–101 (2010)CrossRef
70.
Varadaraajan, V., Mohanty, P.: Design and optimization of rectangular cold spray nozzle: radial injection angle, expansion ratio and traverse speed. Surf. Coat. Technol. 316, 246–254 (2017)CrossRef
71.
Liu, M., Wu, H., Yu, Z., Liao, H., Deng, S.: Description and prediction of multi-layer profile in cold spray using artificial neural networks. J. Therm. Spray Technol. 30, 1453–1463 (2021)CrossRef
72.
Lin, E., Chen, Q., Ozdemir, O.C., Champagne, V.K., Müftü, S.: Effects of interface bonding on the residual stresses in cold-sprayed Al-6061: a numerical investigation. J. Therm. Spray Technol. 28, 472–483 (2019)CrossRef
73.
Song, X., Ng, K.L., Chea, J.M.-K., Sun, W., Tan, A.W.-Y., Zhai, W., et al.: Coupled Eulerian-Lagrangian (CEL) simulation of multiple particle impact during Metal Cold Spray process for coating porosity prediction. Surf. Coat. Technol. 385, 125433 (2020)CrossRef
74.
Manap, A., Nooririnah, O., Misran, H., Okabe, T., Ogawa, K.: Experimental and SPH study of cold spray impact between similar and dissimilar metals. Surf. Eng. 30, 335–341 (2014)CrossRef
75.
Zhou, X.-l, Wu, X.-k, Guo, H.-h, Wang, J.-g, Zhang, J.-s: Deposition behavior of multi-particle impact in cold spraying process. Int. J. Min. Metal. Mater. 17, 635–640 (2010)CrossRef
76.
Assadi, H., Schmidt, T., Richter, H., Kliemann, J.-O., Binder, K., Gärtner, F., et al.: On parameter selection in cold spraying. J. Therm. Spray Technol. 20, 1161–1176 (2011)CrossRef
77.
Wang, Q., Luo, X., Tsutsumi, S., Sasaki, T., Li, C., Ma, N.: Measurement and analysis of cold spray residual stress using arbitrary Lagrangian-Eulerian method. Addit. Manuf. 35, 101296 (2020)
78.
Chen, C., Xie, Y., Yin, S., Planche, M.-P., Deng, S., Lupoi, R., et al.: Evaluation of the interfacial bonding between particles and substrate in angular cold spray. Mater. Lett. 173, 76–79 (2016)CrossRef
79.
80.
81.
82.
Takana, H., Ogawa, K., Shoji, T., Nishiyama, H.: Computational simulation of cold spray process assisted by electrostatic force. Powder Technol. 185, 116–123 (2008)CrossRef
83.
Dykhuizen, R., Neiser, R.: Optimizing the cold spray process. Thermal Spray: Advancing the Science Applying the Technology, pp. 5–8. (2003)
84.
HeydariAstaraee, A., Colombo, C., Bagherifard, S.: Insights on metallic particle bonding to thermoplastic polymeric substrates during cold spray. Sci. Rep. 12, 18123 (2022)CrossRef
85.
86.
Karaoglanli, A.C., Doleker, K.M., Ozgurluk, Y.: Interface failure behavior of yttria stabilized zirconia (YSZ), La2Zr2O7, Gd2Zr2O7, YSZ/La2Zr2O7 and YSZ/Gd2Zr2O7 thermal barrier coatings (TBCs) in thermal cyclic exposure. Mater. Charact. 159, 110072 (2020)CrossRef
87.
Daroonparvar, M., Bakhsheshi-Rad, H.R., Saberi, A., Razzaghi, M., Kasar, A.K., Ramakrishna, S., Menezes, P.L., Misra, M., Ismail, A.F., Sharif, S., Berto, F.: Surface modification of magnesium alloys using thermal and solid-state cold spray processes: challenges and latest progresses. J. Magn. Alloys 10(8), 2025–2061 (2022). https://​doi.​org/​10.​1016/​j.​jma.​2022.​07.​012CrossRef
88.
89.
Singh, S., Sajwan, M., Singh, G., Dixit, A.K., Mehta, A.: Efficient surface detection for assisting collaborative robots. Robot. Autonom. Syst. 161, 104339 (2023)CrossRef
90.
Wu, H., Xie, X., Liu, M., Verdy, C., Zhang, Y., Liao, H., et al.: Stable layer-building strategy to enhance cold-spray-based additive manufacturing. Addit. Manuf. 35, 101356 (2020)
91.
Wang, Q., Han, P., Yin, S., Niu, W.-J., Zhai, L., Li, X., et al.: Current research status on cold sprayed amorphous alloy coatings: a review. Coatings 11, 206 (2021)CrossRef
92.
Razavipour, M., Rahmati, S., Zúñiga, A., Criado, D., Jodoin, B.: Bonding mechanisms in cold spray: influence of surface oxidation during powder storage. J. Therm. Spray Technol. 30, 304–323 (2021)CrossRef
93.
Irissou, E., Poirier, D., Vo, P., Cojocaru, C.V., Aghasibeig, M., Yue, S.: How to unleash the remarkable potential of cold spray: a perspective. J. Therm. Spray Technol. 31, 908–919 (2022)CrossRef
94.
Li, W., Xing, C.: Research progress and prospect of numerical simulation of deposit morphology control in solid-state cold spray additive manufacturing. Trans. China Weld. Inst. 44(10), 1–11 (2023)
95.
96.
Grigoriev, S., Gershman, E., Gershman, I., Mironov, A.: Properties of cold spray coatings for restoration of worn-out contact wires. Coatings 11, 626 (2021)CrossRef
97.
Hu, W., Tan, K., Markovych, S., Liu, X.: Study of a cold spray nozzle throat on acceleration characteristics via CFD. Mech. Mater. 8, F19–F24 (2021)
98.
Palodhi, L., Das, B., Singh, H.: Effect of particle size and morphology on critical velocity and deformation behavior in cold spraying. J. Mater. Eng. Perform. 30, 8276–8288 (2021)CrossRef
99.
Żórawski, W., Molak, R., Mądry, J., Sienicki, J., Góral, A., Makrenek, M., et al.: Experimental and numerical investigations of titanium deposition for cold spray additive manufacturing as a function of standoff distance. Materials 14, 5492 (2021)CrossRef
100.
Marzbanrad, B., Toyserkani, E., Jahed, H.: Customization of residual stress induced in cold spray printing. J. Mater. Process. Technol. 289, 116928 (2021)CrossRef
Metadata
Title
Application of cold spray technology in design and manufacturing of complex geometries
Authors
Amrinder Mehta
Hitesh Vasudev
Lalit Thakur
Publication date
01-05-2024
Publisher
Springer Paris
Published in
International Journal on Interactive Design and Manufacturing (IJIDeM)
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI
https://doi.org/10.1007/s12008-024-01826-x

Premium Partner

    Image Credits