Top

Published in:

2024 | OriginalPaper | Chapter

Recent Advances and Challenges in 3D Printing of Prosthetic Hands

Authors : Triwiyanto, Sari Luthfiyah, Bedjo Utomo, I. Putu Alit Pawana, Wahyu Caesarendra, Vijay Anant Athavale

Published in: Proceedings of the 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Traditional methods of creating prosthetics are often expensive, time-consuming, and lack personalization. However, 3D printing technology has emerged as a transformative force that can address these challenges. The purpose of this abstract is to analyze the research documents on this topic from Scopus, a database of peer-reviewed literature and scientific information. The search query was TITLE-ABS-KEY (prosthetic AND hand AND 3d AND printing) AND PUBYEAR > 2012 AND PUBYEAR < 2024, which returned 236 documents in total. The document analysis reveals that the research on prosthetic hands using 3D printing technology has increased over time, especially in 2020 and 2022. In conclusion, the research on prosthetic hands using 3D printing technology is a growing and diverse field that involves many researchers, institutions, countries/territories, and disciplines. The use of various filaments such as PLA, TPU, and silicone rubber has enabled the creation of low-cost, functional, and customizable prosthetic devices. However, there is still room for improvement and further research in this field to continue advancing this important technology.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Development of a Baby Incubator with a Vital Sign Monitoring Tool Based on Pan-Tompkins Method for Heart Rate Calculation

next chapter A Review of 3D Printing Technology for the Development of Exoskeletons for Upper Limb Rehabilitation

Acharya A et al (2023) Assessment of knowledge, awareness and practices toward the use of 3D printing among dental laboratory technicians in Karnataka, India: a cross-sectional study. J Oral Biol Craniofacial Res 13(4):476–481. https://doi.org/10.1016/j.jobcr.2023.05.006

Ali MH et al (2023) Development of a large-scale multi-extrusion FDM printer, and its challenges. Int J Light Mater Manuf 6(2):198–213. https://doi.org/10.1016/j.ijlmm.2022.10.001

Andrés-Esperanza J et al (2022) Affordable 3D-printed tendon prosthetic hands: expectations and benchmarking questioned. Eng Sci Technol Int J 31:101053. https://doi.org/10.1016/j.jestch.2021.08.010

Banihashemi N et al (2020) Quality control assessment of Philips digital radiography and comparison with Spellman and Samsung systems in Tehran Oil Ministry Hospital. Eur Phys J Plus 135(2):1–15. https://doi.org/10.1140/epjp/s13360-020-00275-1CrossRef

Barrios-Muriel J et al (2020) Advances in orthotic and prosthetic manufacturing: a technology review. Materials (Basel) 13:2. https://doi.org/10.3390/ma13020295

Barua R et al (2019) Importance of 3D printing technology in medical fields. https://doi.org/10.4018/978-1-5225-9167-2.ch002

Bozkurt Y, Karayel E (2021) 3D printing technology; methods, biomedical applications, future opportunities and trends. J Mater Res Technol 14:1430–1450. https://doi.org/10.1016/j.jmrt.2021.07.050CrossRef

Cevik P, Kocacikli M (2020) Three-dimensional printing technologies in the fabrication of maxillofacial prosthesis: a case report. Int J Artif Organs 43(5):343–347. https://doi.org/10.1177/0391398819887401CrossRef

Dhir A et al (2023) Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms. Technovation 125:102792. https://doi.org/10.1016/j.technovation.2023.102792

10.

Faller L-M et al (2022) iLEAD—Intelligent lightweight functional and hybrid 3D-printing for medical assistive devices: current status focusing on the multi-material aspect. Mater Today Proc 70:512–518. https://doi.org/10.1016/j.matpr.2022.09.537

11.

Gadia A et al (2018) Emergence of three-dimensional printing technology and its utility in spine surgery. Asian Spine J 12(2):365–371. https://doi.org/10.4184/asj.2018.12.2.365CrossRef

12.

Garcia-Garcia LA, Rodríguez M (2018) Competitive and technology intelligence to reveal the most influential authors and inter-institutional collaborations on additive manufacturing for hand orthoses. J Intell Stud Bus 8(3):32–44

13.

George JA et al (2020) Bilaterally mirrored movements improve the accuracy and precision of training data for supervised learning of neural or myoelectric prosthetic control. In: Proceedings of the annual international conference on IEEE engineering in medicine and biology society EMBS, pp 3297–3301. https://doi.org/10.1109/EMBC44109.2020.9175388

14.

Golovin MA et al (2018) Use of 3D printing in the orthopedic prosthetics industry. Biomed Eng (NY) 52(2):100–105. https://doi.org/10.1007/s10527-018-9792-1CrossRef

15.

Gomez-Correa M, Cruz-Ortiz D (2022) Low-cost wearable band sensors of surface electromyography for detecting hand movements. Sensors 22:16. https://doi.org/10.3390/s22165931CrossRef

16.

Hajra S et al (2023) Revolutionizing self-powered robotic systems with triboelectric nanogenerators. Nano Energy 115:108729. https://doi.org/10.1016/j.nanoen.2023.108729

17.

Haleem A et al (2020) 3D printing applications for the treatment of cancer. Clin Epidemiol Glob Health 8(4):1072–1076. https://doi.org/10.1016/j.cegh.2020.03.022

18.

Haleem A, Javaid M (2020) 3D printed medical parts with different materials using additive manufacturing. Clin Epidemiol Glob Health 8(1):215–223. https://doi.org/10.1016/j.cegh.2019.08.002

19.

Herath H, de Mel WR, Mittal M et al (2023) Brain-computer interfacing for flexion and extension of bio-inspired robot fingers. Int J Cogn Comput Eng 4:89–99. https://doi.org/10.1016/j.ijcce.2023.02.006

20.

Herbert N et al (2005) A preliminary investigation into the development of 3-D printing of prosthetic sockets. J Rehabil Res Dev 42(2):141–146. https://doi.org/10.1682/JRRD.2004.08.0134CrossRef

21.

Hernandez-Hinojosa E et al (2020) Bioinspired robotic exoskeleton for endotracheal intubation. J Mater Res Technol 9(6):12167–12176. https://doi.org/10.1016/j.jmrt.2020.08.071

22.

Hummelink S et al (2021) Designing and utilizing 3D-printed skin incision guides during the first Dutch bilateral hand-arm transplantation. J Plast Reconstr Aesthetic Surg 74(11):2965–2968. https://doi.org/10.1016/j.bjps.2021.03.076

23.

Javaid M et al (2022) 3D printing applications for healthcare research and development. Glob Health J 6(4):217–226. https://doi.org/10.1016/j.glohj.2022.11.001CrossRef

24.

Kanchana D et al (2021) Gesture controlled robotic hand prosthesis for upper limb amputee rehabilitation. In: 2021 IEEE Bombay section signature conference, IBSSC 2021. Institute of Electrical and Electronics Engineers Inc. https://doi.org/10.1109/IBSSC53889.2021.9673283

25.

ten Kate J et al (2017) 3D-printed upper limb prostheses: a review. Disabil Rehabil Assist Technol 12(3):300–314. https://doi.org/10.1080/17483107.2016.1253117CrossRef

26.

Koprnicky J et al (2017) 3D printed bionic prosthetic hands. In: Proceedings of the 2017 IEEE international workshop electronics, control, measurement, signals and their application to mechatronics, ECMSM 2017. https://doi.org/10.1109/ECMSM.2017.7945898

27.

Krausz NE et al (2016) Design and fabrication of a six degree-of-freedom open source hand. IEEE Trans Neural Syst Rehabil Eng 24(5):562–572. https://doi.org/10.1109/TNSRE.2015.2440177CrossRef

28.

Kuipers T et al (2022) ITIL: interlaced topologically interlocking lattice for continuous dual-material extrusion. Addit Manuf 50:102495. https://doi.org/10.1016/j.addma.2021.102495

29.

LA O et al (2017) 乳鼠心肌提取 HHS public access. Physiol Behav 176(5):139–148. https://doi.org/10.1037/abn0000058.Poor

30.

Leggieri S et al (2019) Dexterous gripper for in-hand manipulation with embedded object localization algorithm. Procedia Manuf 38:1354–1361. https://doi.org/10.1016/j.promfg.2020.01.153

31.

León-Camacho H et al (2019) Innovation of robotic hand with two thumbs. Procedia Manuf 41:992–1000. https://doi.org/10.1016/j.promfg.2019.10.025

32.

Leung WK et al (2021) Optimization of support structure in multi-articulated joints of non-assembly mechanisms. Procedia CIRP 100:726–731. https://doi.org/10.1016/j.procir.2021.05.085

33.

Li Y et al (2019) Flexible and wearable healthcare sensors for visual reality health-monitoring. Virtual Real Intell Hardw 1(4):411–427. https://doi.org/10.1016/j.vrih.2019.08.001

34.

Llop-Harillo I et al (2019) The anthropomorphic hand assessment protocol (AHAP). Rob Auton Syst 121:103259. https://doi.org/10.1016/j.robot.2019.103259

35.

Manero A et al (2019) Implementation of 3D printing technology in the field of prosthetics: past, present, and future. Int J Environ Res Public Health 16:9. https://doi.org/10.3390/ijerph16091641CrossRef

36.

Maroti P et al (2019) Printing orientation defines anisotropic mechanical properties in additive manufacturing of upper limb prosthetics. Mater Res Express 6:3. https://doi.org/10.1088/2053-1591/aaf5a9CrossRef

37.

Mendaza-DeCal R et al (2023) Orthotics and prosthetics by 3D-printing: accelerating its fabrication flow. Res Vet Sci 162:104960. https://doi.org/10.1016/j.rvsc.2023.104960

38.

Muminović AJ et al (2023) Experimental failure analysis of polylactic acid gears made by additive manufacturing. Procedia Struct Integr 46:125–130. https://doi.org/10.1016/j.prostr.2023.06.021

39.

Ngan CGY et al (2019) Electrode interfacing to 3D printing. Materials (Basel) 12(12):1927

40.

Nickel EA et al (2020) Strength testing of definitive transtibial prosthetic sockets made using 3D-printing technology. J Prosthetics Orthot 32(4):295–300. https://doi.org/10.1097/JPO.0000000000000294CrossRef

41.

Ntagios M et al (2023) Closed-loop direct ink extruder system with multi-part materials mixing. Addit Manuf 64:103437. https://doi.org/10.1016/j.addma.2023.103437

42.

Rezmer J et al (2022) The use of 3d printing technology in the development of a prosthetic thumb. J Educ Health Sport 12(7):405–409. https://doi.org/10.12775/jehs.2022.12.07.039

43.

Ribeiro D et al (2021) 3D printing and amputation: a scoping review. Disabil Rehabil Assist Technol 16(2):221–240. https://doi.org/10.1080/17483107.2019.1646825CrossRef

44.

Saeed K et al (2021) Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory. Compos Struct 259:113226. https://doi.org/10.1016/j.compstruct.2020.113226

45.

Schweiger J et al (2021) 3d printing in digital prosthetic dentistry: an overview of recent developments in additive manufacturing. J Clin Med 10:9. https://doi.org/10.3390/jcm10092010CrossRef

46.

Setty K et al (2020) Design Considerations of the Touch Hand 4. Procedia CIRP 91:494–502. https://doi.org/10.1016/j.procir.2020.02.205

47.

Siraj I, Bharti PS (2020) Reliability analysis of a 3D printing process. Procedia Comput Sci 173:191–200. https://doi.org/10.1016/j.procs.2020.06.023

48.

Tom T et al (2022) Additive manufacturing in the biomedical field-recent research developments. Results Eng 16:100661. https://doi.org/10.1016/j.rineng.2022.100661

49.

Triwiyanto T et al (2019) A low cost and open-source anthropomorphic prosthetics hand for transradial amputee. In: International conference on science and applied science (ICSAS) 2019. AIP Conference Proceedings, Solo

50.

Triwiyanto T et al (2020) Low-cost and open-source anthropomorphic prosthetics hand using linear actuators. Telkomnika (Telecommun Comput Electron Control) 18(2):953–960

51.

Yan Y et al (2022) Design, kinematic modeling and evaluation of a novel soft prosthetic hand with abduction joints. Med Nov Technol Dev 15:100151. https://doi.org/10.1016/j.medntd.2022.100151

52.

Yang H et al (2018) 3D printing of flexible electronic devices. Small Methods 2(1):1–7. https://doi.org/10.1002/smtd.201700259CrossRef

Title: Recent Advances and Challenges in 3D Printing of Prosthetic Hands
Authors: Triwiyanto
Sari Luthfiyah
Bedjo Utomo
I. Putu Alit Pawana
Wahyu Caesarendra
Vijay Anant Athavale
Publisher: Springer Nature Singapore
Book: Proceedings of the 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics
Print ISBN: 978-981-9714-62-9

Electronic ISBN: 978-981-9714-63-6

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-981-97-1463-6_43

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"