3D printing of aluminum alloys using laser powder deposition: a review

1.

Powell D, Rennie AEW, Geekie L, Burns N (2020) Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders. J Clean Prod:268. https://doi.org/10.1016/j.jclepro.2020.122077

2.

Fullenwider B, Kiani P, Schoenung JM, Ma K (2019) Two-stage ball milling of recycled machining chips to create an alternative feedstock powder for metal additive manufacturing. Powder Technol 342:562–571. https://doi.org/10.1016/j.powtec.2018.10.023CrossRef

3.

Mu S, Hong Y, Huang H, Ishii A, Lei J, Song Y, Li Y, Brinkman KS, Peng F, Xiao H, Tong J (2020) A novel laser 3D printing method for the advanced manufacturing of protonic ceramics. Membranes (Basel) 10(5). https://doi.org/10.3390/membranes10050098

4.

Haley JC, Schoenung JM, Lavernia EJ (2019) Modelling particle impact on the melt pool and wettability effects in laser directed energy deposition additive manufacturing. Mater Sci Eng A:761. https://doi.org/10.1016/j.msea.2019.138052

5.

Murr LE, Gaytan SM, Ramirez DA, Martinez E, Hernandez J, Amato KN, Shindo PW, Medina FR, Wicker RB (2012) Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mater Sci Technol 28(1):1–14. https://doi.org/10.1016/s1005-0302(12)60016-4CrossRef

6.

DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001CrossRef

7.

Mukherjee T, Zuback JS, De A, DebRoy T (2016) Printability of alloys for additive manufacturing. Sci Rep 6:19717. https://doi.org/10.1038/srep19717CrossRef

8.

Olakanmi EO, Cochrane RF, Dalgarno KW (2011) Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders. J Mater Process Technol 211(1):113–121. https://doi.org/10.1016/j.jmatprotec.2010.09.003CrossRef

9.

Jia Q, Gu D (2014) Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties. J Alloys Compd 585:713–721. https://doi.org/10.1016/j.jallcom.2013.09.171CrossRef

10.

Qi T, Zhu H, Zhang H, Yin J, Ke L, Zeng X (2017) Selective laser melting of Al7050 powder: melting mode transition and comparison of the characteristics between the keyhole and conduction mode. Mater Des 135:257–266. https://doi.org/10.1016/j.matdes.2017.09.014CrossRef

11.

Carter LN, Wang X, Read N, Khan R, Aristizabal M, Essa K, Attallah MM (2016) Process optimisation of selective laser melting using energy density model for nickel based superalloys. Mater Sci Technol 32(7):657–661. https://doi.org/10.1179/1743284715y.0000000108CrossRef

12.

Jia H, Sun H, Wang H, Wu Y, Wang H (2021) Scanning strategy in selective laser melting (SLM): a review. Int J Adv Manuf Technol 113(9-10):2413–2435. https://doi.org/10.1007/s00170-021-06810-3CrossRef

13.

Wang H, Zou Y (2019) Microscale interaction between laser and metal powder in powder-bed additive manufacturing: conduction mode versus keyhole mode. International Journal of Heat Mass Transf 142. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118473

14.

Chen Y, Wang H, Wu Y, Wang H (2020) Predicting the printability in selective laser melting with a supervised machine learning method. Materials (Basel) 13(22). https://doi.org/10.3390/ma13225063

15.

Shishkovsky I, Missemer F, Smurov I (2018) Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition. Compos Struct 183:663–670. https://doi.org/10.1016/j.compstruct.2017.09.004CrossRef

16.

Zhao Z, Chen J, Guo S, Tan H, Lin X, Huang W (2017) Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti–6Al–4V titanium alloy. J Mater Sci Technol 33(7):675–681. https://doi.org/10.1016/j.jmst.2016.09.026CrossRef

17.

Panda BK, Sahoo S (2019) Thermo-mechanical modeling and validation of stress field during laser powder bed fusion of AlSi10Mg built part. Results in Physics 12:1372–1381. https://doi.org/10.1016/j.rinp.2019.01.002CrossRef

18.

Haley JC, Schoenung JM, Lavernia EJ (2018) Observations of particle-melt pool impact events in directed energy deposition. Additive Manufacturing 22:368–374. https://doi.org/10.1016/j.addma.2018.04.028CrossRef

19.

Wang K, Du D, Liu G, Pu Z, Chang B, Ju J (2020) High-temperature oxidation behaviour of high chromium superalloys additively manufactured by conventional or extreme high-speed laser metal deposition. Corros Sci:176. https://doi.org/10.1016/j.corsci.2020.108922

20.

Savinov R, Wang Y, Shi J (2020) Microstructure and properties of CeO2-doped CoCrFeMnNi high entropy alloy fabricated by laser metal deposition. J Manuf Process 56:1245–1251. https://doi.org/10.1016/j.jmapro.2020.04.018CrossRef

21.

Yan L, Chen Y, Liou F (2020) Additive manufacturing of functionally graded metallic materials using laser metal deposition. Additive Manufacturing:31. https://doi.org/10.1016/j.addma.2019.100901

22.

Azizi A, Daeumer MA, Schiffres SN (2019) Additive laser metal deposition onto silicon. Additive Manufacturing 25:390–398. https://doi.org/10.1016/j.addma.2018.09.027CrossRef

23.

Zhang J, Song B, Wei Q, Bourell D, Shi Y (2019) A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends. J Mater Sci Technol 35(2):270–284. https://doi.org/10.1016/j.jmst.2018.09.004CrossRef

24.

Hurly JJ (1999) Thermophysical properties of gaseous CF4 and C2F6 from speed-of-sound measurements. Int J Thermophys 20(2):455–484. https://doi.org/10.1007/s10765-005-0001-6CrossRef

25.

Ahuja B, Karg M, Nagulin KY, Schmidt M (2014) Fabrication and characterization of high strength Al-Cu alloys processed using laser beam melting in metal powder bed. Phys Procedia 56:135–146. https://doi.org/10.1016/j.phpro.2014.08.156CrossRef

26.

Liu X, Liu J, Yang K, He S, Lu H, Li B, Zeng G, Zhang J, Li W, Wu L, Feng L (2018) Study on the deliquescence of AlSb/Sb stacks deposited by pulsed laser deposition. Mater Sci Semicond Process 81:102–107. https://doi.org/10.1016/j.mssp.2018.03.019CrossRef

27.

Xu X, Zhao Y, Hou H, Liu F (2018) Concentration and fluid flow effects on kinetics, dendrite remelting and stress accumulation upon rapid solidification of deeply undercooled alloys. J Alloys Compd 744:740–749. https://doi.org/10.1016/j.jallcom.2018.02.065CrossRef

28.

Demir AG, Biffi CA (2019) Micro laser metal wire deposition of thin-walled Al alloy components: process and material characterization. J Manuf Process 37:362–369. https://doi.org/10.1016/j.jmapro.2018.11.017CrossRef

29.

Kempen K, Thijs L, Van Humbeeck J, Kruth JP (2014) Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation. Mater Sci Technol 31(8):917–923. https://doi.org/10.1179/1743284714y.0000000702CrossRef

30.

Ding Y, Muñiz-Lerma JA, Trask M, Chou S, Walker A, Brochu M (2016) Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys. MRS Bull 41(10):745–751. https://doi.org/10.1557/mrs.2016.214CrossRef

31.

Li J, Cheng X, Liu D, Zhang S-Q, Li Z, He B, Wang H-M (2018) Phase evolution of a heat-treatable aluminum alloy during laser additive manufacturing. Mater Lett 214:56–59. https://doi.org/10.1016/j.matlet.2017.11.111CrossRef

32.

Sun S, Zheng L, Peng H, Zhang H (2016) Microstructure and mechanical properties of Al-Fe-V-Si aluminum alloy produced by electron beam melting. Mater Sci Eng A 659:207–214. https://doi.org/10.1016/j.msea.2016.02.053CrossRef

33.

Dinda GP, Dasgupta AK, Bhattacharya S, Natu H, Dutta B, Mazumder J (2012) Microstructural characterization of laser-deposited Al 4047 alloy. Metall Mater Trans A 44(5):2233–2242. https://doi.org/10.1007/s11661-012-1560-3CrossRef

34.

Thijs L, Kempen K, Kruth J-P, Van Humbeeck J (2013) Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater 61(5):1809–1819. https://doi.org/10.1016/j.actamat.2012.11.052CrossRef

35.

Blindheim J, Grong Ø, Welo T, Steinert M (2020) On the mechanical integrity of AA6082 3D structures deposited by hybrid metal extrusion & bonding additive manufacturing. J Mater Process Technol 282. https://doi.org/10.1016/j.jmatprotec.2020.116684

36.

Levy GN (2010) The role and future of the laser technology in the additive manufacturing environment. Phys Procedia 5:65–80. https://doi.org/10.1016/j.phpro.2010.08.123CrossRef

37.

Levy GN, Schindel R, Kruth JP (2003) Rapid manufacturing and rapid tooling with layer manufacturing (Lm) technologies, state of the art and future perspectives. CIRP Ann 52(2):589–609. https://doi.org/10.1016/s0007-8506(07)60206-6CrossRef

38.

Kruth JP, Leu MC, Nakagawa T (1998) Progress in additive manufacturing and rapid prototyping. CIRP Ann 47(2):525–540. https://doi.org/10.1016/s0007-8506(07)63240-5CrossRef

39.

Keshavarzkermani A, Marzbanrad E, Esmaeilizadeh R, Mahmoodkhani Y, Ali U, Enrique PD, Zhou NY, Bonakdar A, Toyserkani E (2019) An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion. Opt Laser Technol 116:83–91. https://doi.org/10.1016/j.optlastec.2019.03.012CrossRef

40.

Liu Y, Liu C, Liu W, Ma Y, Tang S, Liang C, Cai Q, Zhang C (2019) Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method. Opt Laser Technol 111:470–480. https://doi.org/10.1016/j.optlastec.2018.10.030CrossRef

41.

Liu Z, Qi H (2015) Effects of processing parameters on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy. J Mater Process Technol 216:19–27. https://doi.org/10.1016/j.jmatprotec.2014.08.025CrossRef

42.

Fathi A, Toyserkani E, Khajepour A, Durali M (2006) Prediction of melt pool depth and dilution in laser powder deposition. J Phys D Appl Phys 39(12):2613–2623. https://doi.org/10.1088/0022-3727/39/12/022CrossRef

43.

Yoshida N, Dohi O, Inoue K, Sugino S, Yasuda R, Hirose R, Naito Y, Inada Y, Murakami T, Ogiso K, Morinaga Y, Kishimoto M, Itoh Y (2020) The efficacy of tumor characterization and tumor detectability of linked color imaging and blue laser imaging with an LED endoscope compared to a LASER endoscope. Int J Color Dis 35(5):815–825. https://doi.org/10.1007/s00384-020-03532-yCrossRef

44.

Wang H, Kawahito Y, Yoshida R, Nakashima Y, Shiokawa K (2017) Development of a high-power blue laser (445 nm) for material processing. Opt Lett 42(12):2251–2254. https://doi.org/10.1364/OL.42.002251CrossRef

45.

Kawakami H, Kuno H, Kawahito Y, Wang H (2021) Hardness enhancement by molten metal flow in laser remelting with an ultra-thin additional element coating. J Mater Process Technol 288. https://doi.org/10.1016/j.jmatprotec.2020.116888

46.

Ravnikar D, Dahotre NB, Grum J (2013) Laser coating of aluminum alloy EN AW 6082-T651 with TiB2 and TiC: microstructure and mechanical properties. Appl Surf Sci 282:914–922. https://doi.org/10.1016/j.apsusc.2013.06.089CrossRef

47.

Ravnikar D, Rajamure RS, Trdan U, Dahotre NB, Grum J (2018) Electrochemical and DFT studies of laser-alloyed TiB2/TiC/Al coatings on aluminium alloy. Corros Sci 136:18–27. https://doi.org/10.1016/j.corsci.2018.02.028CrossRef

48.

Panwisawas C, Tang YT, Reed RC (2020) Metal 3D printing as a disruptive technology for superalloys. Nat Commun 11(1):2327. https://doi.org/10.1038/s41467-020-16188-7CrossRef

49.

Pappas JM, Dong X (2020) Porosity characterization of additively manufactured transparent MgAl2O4 spinel by laser direct deposition. Ceram Int 46(5):6745–6755. https://doi.org/10.1016/j.ceramint.2019.11.164CrossRef

50.

Yeung H, Lane B, Fox J (2019) Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing. Additive Manufacturing:30. https://doi.org/10.1016/j.addma.2019.100844

51.

Wang J-h, F-z H, S-f C, Ying W-s (2019) A novel model of laser energy attenuation by powder particles for laser solid forming. Int J Mach Tools Manuf 145. https://doi.org/10.1016/j.ijmachtools.2019.103440

52.

Wang H, Nakanishi M, Kawahito Y (2017) Effects of welding speed on absorption rate in partial and full penetration welding of stainless steel with high brightness and high power laser. J Mater Process Technol 249:193–201. https://doi.org/10.1016/j.jmatprotec.2017.06.014CrossRef

53.

Jiang B, Zhenglong L, Xi C, Peng L, Nannan L, Yanbin C (2019) Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition. Ceram Int 45(5):5680–5692. https://doi.org/10.1016/j.ceramint.2018.12.033CrossRef

54.

Wen X, Wang Q, Mu Q, Kang N, Sui S, Yang H, Lin X, Huang W (2019) Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: microstructure and mechanical properties. Mater Sci Eng A 745:319–325. https://doi.org/10.1016/j.msea.2018.12.072CrossRef

55.

Lv F, Shen L, Liang H, Xie D, Wang C, Tian Z (2019) Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment. Optik 179:8–18. https://doi.org/10.1016/j.ijleo.2018.10.112CrossRef

56.

Svetlizky D, Zheng B, Buta T, Zhou Y, Golan O, Breiman U, Haj-Ali R, Schoenung JM, Lavernia EJ, Eliaz N (2020) Directed energy deposition of Al 5xxx alloy using Laser Engineered Net Shaping (LENS®). Mater Des 192. https://doi.org/10.1016/j.matdes.2020.108763

57.

Isanaka SP, Karnati S, Liou F (2016) Blown powder deposition of 4047 aluminum on 2024 aluminum substrates. Manufacturing Letters 7:11–14. https://doi.org/10.1016/j.mfglet.2015.11.007CrossRef

58.

Ren YM, Lin X, Guo PF, Yang HO, Tan H, Chen J, Li J, Zhang YY, Huang WD (2019) Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition: experimental and prediction. Int J Fatigue 127:58–73. https://doi.org/10.1016/j.ijfatigue.2019.05.035CrossRef

59.

Zhan Z (2019) Experiments and numerical simulations for the fatigue behavior of a novel TA2-TA15 titanium alloy fabricated by laser melting deposition. Int J Fatigue 121:20–29. https://doi.org/10.1016/j.ijfatigue.2018.12.001CrossRef

60.

Narayana PL, Lee S, Choi S-W, Li C-L, Park CH, Yeom J-T, Reddy NS, Hong J-K (2019) Microstructural response of β-stabilized Ti–6Al–4V manufactured by direct energy deposition. J Alloys Compd 811. https://doi.org/10.1016/j.jallcom.2019.152021

61.

Fu M, Yuan Y, Ma X, Lin X (2019) A study of α variant selection in laser solid forming Ti-6Al-4V. J Alloys Compd 792:1261–1266. https://doi.org/10.1016/j.jallcom.2019.04.052CrossRef

62.

Qiu C, Ravi GA, Dance C, Ranson A, Dilworth S, Attallah MM (2015) Fabrication of large Ti–6Al–4V structures by direct laser deposition. J Alloys Compd 629:351–361. https://doi.org/10.1016/j.jallcom.2014.12.234CrossRef

63.

Bailey NS, Katinas C, Shin YC (2017) Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses. J Mater Process Technol 247:223–233. https://doi.org/10.1016/j.jmatprotec.2017.04.020CrossRef

64.

Melia MA, Nguyen H-DA, Rodelas JM, Schindelholz EJ (2019) Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing. Corros Sci 152:20–30. https://doi.org/10.1016/j.corsci.2019.02.029CrossRef

65.

Bhattacharya S, Dinda GP, Dasgupta AK, Mazumder J (2011) Microstructural evolution of AISI 4340 steel during direct metal deposition process. Mater Sci Eng A 528(6):2309–2318. https://doi.org/10.1016/j.msea.2010.11.036CrossRef

66.

Guo P, Zou B, Huang C, Gao H (2017) Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition. J Mater Process Technol 240:12–22. https://doi.org/10.1016/j.jmatprotec.2016.09.005CrossRef

67.

Arrizubieta JI, Lamikiz A, Cortina M, Ukar E, Alberdi A (2018) hardness, grainsize and porosity formation prediction on the laser metal deposition of AISI 304 stainless steel. Int J Mach Tools Manuf 135:53–64. https://doi.org/10.1016/j.ijmachtools.2018.08.004CrossRef

68.

Zhong C, Kittel J, Gasser A, Schleifenbaum JH (2019) Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition. Opt Laser Technol 109:352–360. https://doi.org/10.1016/j.optlastec.2018.08.003CrossRef

69.

Alekseev AV, Turichin GA, Klimova-Korsmik OG, Valdaytseva EA, Rashkovets MV, Nikulina AA (2020) Simulation of the Ni3Al intermetallic inclusion growth process during direct laser deposition using Ni-based superalloy powder. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.01.562

70.

Yan C, Xiong D, Li J (2018) Synthesis of Ni-Al-Ta composite coatings on Al alloy plates and the transfer of Al powder via mechanical milling technique. Powder Technol 340:234–242. https://doi.org/10.1016/j.powtec.2018.09.024CrossRef

71.

Cropper MD (2018) Thin films of AlCrFeCoNiCu high-entropy alloy by pulsed laser deposition. Appl Surf Sci 455:153–159. https://doi.org/10.1016/j.apsusc.2018.05.172CrossRef

72.

Yao H, Tan Z, He D, Zhou Z, Zhou Z, Xue Y, Cui L, Chen L, Wang G, Yang Y (2020) High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting. J Alloys Compd:813. https://doi.org/10.1016/j.jallcom.2019.152196

73.

Nartu MSKKY, Alam T, Dasari S, Mantri SA, Gorsse S, Siller H, Dahotre N, Banerjee R (2020) Enhanced tensile yield strength in laser additively manufactured Al0.3CoCrFeNi high entropy alloy. Materialia 9. https://doi.org/10.1016/j.mtla.2019.100522

74.

Liu T, Leazer JD, Menon SK, Brewer LN (2018) Microstructural analysis of gas atomized Al-Cu alloy feedstock powders for cold spray deposition. Surf Coat Technol 350:621–632. https://doi.org/10.1016/j.surfcoat.2018.07.006CrossRef

75.

Guo S, Ning ZL, Zhang MX, Cao FY, Sun JF (2014) Effects of gas to melt ratio on the microstructure of an Al–10.83Zn–3.39Mg–1.22Cu alloy produced by spray atomization and deposition. Mater Charact 87:62–69. https://doi.org/10.1016/j.matchar.2013.10.030CrossRef

76.

Tan H, Fang Y, Zhong C, Yuan Z, Fan W, Li Z, Chen J, Lin X (2020) Investigation of heating behavior of laser beam on powder stream in directed energy deposition. Surf Coat Technol:397. https://doi.org/10.1016/j.surfcoat.2020.126061

77.

Kassym K, Perveen A (2020) Atomization processes of metal powders for 3D printing. Materials Today: Proceedings 26:1727–1733. https://doi.org/10.1016/j.matpr.2020.02.364CrossRef

78.

Zekovic S, Dwivedi R, Kovacevic R (2007) Numerical simulation and experimental investigation of gas–powder flow from radially symmetrical nozzles in laser-based direct metal deposition. Int J Mach Tools Manuf 47(1):112–123. https://doi.org/10.1016/j.ijmachtools.2006.02.004CrossRef

79.

Piscopo G, Atzeni E, Salmi A (2020) Mesoscale modelling of laser powder-based directed energy deposition process. Procedia CIRP 19(1):393–398. https://doi.org/10.1016/j.procir.2020.05.068CrossRef

80.

Jo H, Cho Y-H, Choi M, Cho J, Um JH, Sung Y-E, Choe H (2014) Novel method of powder-based processing of copper nanofoams for their potential use in energy applications. Mater Chem Phys 145(1-2):6–11. https://doi.org/10.1016/j.matchemphys.2014.02.009CrossRef

81.

Lia F, Park J, Tressler J, Martukanitz R (2017) Partitioning of laser energy during directed energy deposition. Additive Manufacturing 18:31–39. https://doi.org/10.1016/j.addma.2017.08.012CrossRef

82.

Scipioni Bertoli U, Guss G, Wu S, Matthews MJ, Schoenung JM (2017) In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing. Mater Des 135:385–396. https://doi.org/10.1016/j.matdes.2017.09.044CrossRef

83.

Manvatkar V, De A, DebRoy T (2014) Heat transfer and material flow during laser assisted multi-layer additive manufacturing. J Appl Phys 116(12). https://doi.org/10.1063/1.4896751

84.

Shin YC, Bailey N, Katinas C, Tan W (2018) Predictive modeling capabilities from incident powder and laser to mechanical properties for laser directed energy deposition. Comput Mech 61(5):617–636. https://doi.org/10.1007/s00466-018-1545-1CrossRefMATH

85.

Balu P, Leggett P, Kovacevic R (2012) Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process. J Mater Process Technol 212(7):1598–1610. https://doi.org/10.1016/j.jmatprotec.2012.02.020CrossRef

86.

Wen SY, Shin YC, Murthy JY, Sojka PE (2009) Modeling of coaxial powder flow for the laser direct deposition process. Int J Heat Mass Transf 52(25-26):5867–5877. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.018CrossRefMATH

87.

Fan W, Tan H, Lin X, Huang W (2020) Thermal analysis of synchronous induction-assisted laser deposition of Ti-6Al-4V using different laser-induction interaction modes. Additive Manufacturing 35. https://doi.org/10.1016/j.addma.2020.101267

88.

Zhang F, Wang K, Zhao H, Qiu Y, Wang G, Zhang J, Tan H (2020) Interaction between powder particle and gas-liquid interface of the melt pool during laser solid forming process. Opt Lasers Eng 129. https://doi.org/10.1016/j.optlaseng.2020.106065

89.

H-s R, X-j T, Liu D, Liu J, Wang H-m (2015) Microstructural evolution and mechanical properties of laser melting deposited Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy. Trans Nonferrous Metals Soc China 25(6):1856–1864. https://doi.org/10.1016/s1003-6326(15)63792-xCrossRef

90.

Kaufmann N, Imran M, Wischeropp TM, Emmelmann C, Siddique S, Walther F (2016) Influence of process parameters on the quality of aluminium alloy EN AW 7075 using selective laser melting (SLM). Phys Procedia 83:918–926. https://doi.org/10.1016/j.phpro.2016.08.096CrossRef

91.

Muggerud AMF, Li Y, Holmestad R (2013) Composition and orientation relationships of constituent particles in 3xxx aluminum alloys. Philos Mag 94(6):556–568. https://doi.org/10.1080/14786435.2013.857796CrossRef

92.

Tokarski T (2016) Mechanical properties of solid-state recycled 4xxx aluminum alloy chips. J Mater Eng Perform 25(8):3252–3259. https://doi.org/10.1007/s11665-016-2194-1CrossRef

93.

Jawade SA, Joshi RS, Desai SB (2020) Comparative study of mechanical properties of additively manufactured aluminum alloy. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.02.096

94.

Geng K, Yang Y, Li S, Misra RDK, Zhu Q (2020) Enabling high-performance 3D printing of Al powder by decorating with high laser absorbing Co phase. Additive Manufacturing 32. https://doi.org/10.1016/j.addma.2019.101012

95.

Zhao LZ, Zhao MJ, Song LJ (1980-2015) Mazumder J (2014) Ultra-fine Al–Si hypereutectic alloy fabricated by direct metal deposition. Mater Des 56:542–548. https://doi.org/10.1016/j.matdes.2013.11.059CrossRef

96.

Dinda GP, Dasgupta AK, Mazumder J (2012) Evolution of microstructure in laser deposited Al–11.28%Si alloy. Surf Coat Technol 206(8-9):2152–2160. https://doi.org/10.1016/j.surfcoat.2011.09.051CrossRef

97.

Singh A, Ramakrishnan A, Dinda GP (2017) Direct laser metal deposition of eutectic Al-Si alloy for automotive applications. In: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. pp 71-80. https://doi.org/10.1007/978-3-319-51493-2_8

98.

Lei Z, Tian Z, Li P, Chen Y, Zhang H, Chen X (2017) Joining of Si p /6063Al composite using additive manufacturing-based laser melting deposition. Mater Lett 190:191–194. https://doi.org/10.1016/j.matlet.2017.01.016CrossRef

99.

Lei Z, Tian Z, Li P, Chen Y, Zhang H, Gu J, Su X (2017) Effect of Si content on microstructure and thermo-physical properties of the joint of Si p /6063Al composite by laser melting deposition. Opt Laser Technol 97:116–123. https://doi.org/10.1016/j.optlastec.2017.06.019CrossRef

100.

Jiao S, Cheng X, Shen S, Wang X, He B, Liu D, Wang H (2020) Microstructure evolution and mechanical behavior of Al–Li alloy fabricated by laser melting deposition technique. J Alloys Compd:821. https://doi.org/10.1016/j.jallcom.2019.153125

101.

Gu T, Chen B, Tan C, Feng J (2019) Microstructure evolution and mechanical properties of laser additive manufacturing of high strength Al-Cu-Mg alloy. Opt Laser Technol 112:140–150. https://doi.org/10.1016/j.optlastec.2018.11.008CrossRef

102.

Caiazzo F, Alfieri V, Argenio P, Sergi V (2017) Additive manufacturing by means of laser-aided directed metal deposition of 2024 aluminium powder: Investigation and optimization. Advances in Mechanical Engineering 9(8). https://doi.org/10.1177/1687814017714982

103.

Singh A, Ramakrishnan A, Baker D, Biswas A, Dinda GP (2017) Laser metal deposition of nickel coated Al 7050 alloy. J Alloys Compd 719:151–158. https://doi.org/10.1016/j.jallcom.2017.05.171CrossRef

104.

Zhao T, Cai W, Dahmen M, Schaible J, Hong C, Gasser A, Weisheit A, Biermann T, Kelbassa I, Zhang H, Gu D, Schleifenbaum JH (2018) Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures. Vacuum 158:121–125. https://doi.org/10.1016/j.vacuum.2018.09.052CrossRef

105.

Kürnsteiner P, Bajaj P, Gupta A, Wilms MB, Weisheit A, Li X, Leinenbach C, Gault B, Jägle EA, Raabe D (2020) Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys. Additive Manufacturing:32. https://doi.org/10.1016/j.addma.2019.100910

106.

Rometsch PA, Zhong H, Nairn KM, Jarvis T, Wu X (2014) Characterization of a laser-fabricated hypereutectic Al–Sc alloy bar. Scr Mater 87:13–16. https://doi.org/10.1016/j.scriptamat.2014.05.021CrossRef

107.

Javidani M, Arreguin-Zavala J, Danovitch J, Tian Y, Brochu M (2016) Additive manufacturing of AlSi10Mg alloy using direct energy deposition: microstructure and hardness characterization. J Therm Spray Technol 26(4):587–597. https://doi.org/10.1007/s11666-016-0495-4CrossRef

108.

Kiani P, Dupuy AD, Ma K, Schoenung JM (2020) Directed energy deposition of AlSi10Mg: single track nonscalability and bulk properties. Mater Des 194. https://doi.org/10.1016/j.matdes.2020.108847

109.

Wang X, Li L, Qu J, Tao W (2019) Microstructure and mechanical properties of laser metal deposited AlSi10Mg alloys. Mater Sci Technol 35(18):2284–2293. https://doi.org/10.1080/02670836.2019.1674022CrossRef

110.

Chen B, Yao Y, Song X, Tan C, Cao L, Feng J (2018) Microstructure and mechanical properties of additive manufacturing AlSi10Mg alloy using direct metal deposition. Ferroelectrics 523(1):153–166. https://doi.org/10.1080/00150193.2018.1392147CrossRef

111.

Tan H, Hao D, Al-Hamdani K, Zhang F, Xu Z, Clare AT (2018) Direct metal deposition of TiB 2 /AlSi10Mg composites using satellited powders. Mater Lett 214:123–126. https://doi.org/10.1016/j.matlet.2017.11.121CrossRef

112.

Li JC, Lin X, Kang N, Lu JL, Wang QZ, Huang WD (2020) Microstructure, tensile and wear properties of a novel graded Al matrix composite prepared by direct energy deposition. J Alloys Compd 826. https://doi.org/10.1016/j.jallcom.2020.154077

113.

Ramakrishnan A, Dinda GP (2020) Microstructural control of an Al–W aluminum matrix composite during direct laser metal deposition. J Alloys Compd 813. https://doi.org/10.1016/j.jallcom.2019.152208

114.

Froend M, Riekehr S, Kashaev N, Klusemann B, Enz J (2018) Process development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laser. J Manuf Process 34:721–732. https://doi.org/10.1016/j.jmapro.2018.06.033CrossRef

115.

Gao Y, Zhao J, Zhao Y, Wang Z, Song H, Gao M (2019) Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy. Vacuum 167:471–478. https://doi.org/10.1016/j.vacuum.2019.06.042CrossRef

116.

Olakanmi EO (2013) Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: effect of processing conditions and powder properties. J Mater Process Technol 213(8):1387–1405. https://doi.org/10.1016/j.jmatprotec.2013.03.009CrossRef

117.

Paish ADM, Nikolov HN, Welch ID, El-Warrak AO, Teeter MG, Naudie DDR, Holdsworth DW (2020) Image-based design and 3D-metal printing of a rat hip implant for use in a clinically representative model of joint replacement. J Orthop Res. https://doi.org/10.1002/jor.24706

118.

Soylemez E (2020) High deposition rate approach of selective laser melting through defocused single bead experiments and thermal finite element analysis for Ti-6Al-4V. Additive Manufacturing 31. https://doi.org/10.1016/j.addma.2019.100984

119.

Walker TR, Bennett CJ, Lee TL, Clare AT (2020) A novel numerical method to predict the transient track geometry and thermomechanical effects through in-situ modification of the process parameters in direct energy deposition. Finite Elem Anal Des 169. https://doi.org/10.1016/j.finel.2019.103347

120.

Liu C, Li C, Zhang Z, Sun S, Zeng M, Wang F, Guo Y, Wang J (2020) Modeling of thermal behavior and microstructure evolution during laser cladding of AlSi10Mg alloys. Opt Laser Technol 123. https://doi.org/10.1016/j.optlastec.2019.105926

121.

Terrassa KL, Haley JC, MacDonald BE, Schoenung JM (2018) Reuse of powder feedstock for directed energy deposition. Powder Technol 338:819–829. https://doi.org/10.1016/j.powtec.2018.07.065CrossRef

122.

Chen B, Moon SK, Yao X, Bi G, Shen J, Umeda J, Kondoh K (2017) Strength and strain hardening of a selective laser melted AlSi10Mg alloy. Scr Mater 141:45–49. https://doi.org/10.1016/j.scriptamat.2017.07.025CrossRef

123.

Xia H, Zhang L, Tan C, Wu L, Chen B, Li L (2019) Effect of heat input on a laser powder deposited Al/steel butt joint. Opt Laser Technol 111:459–469. https://doi.org/10.1016/j.optlastec.2018.10.032CrossRef

124.

Ghasri-Khouzani M, Peng H, Attardo R, Ostiguy P, Neidig J, Billo R, Hoelzle D, Shankar MR (2019) Comparing microstructure and hardness of direct metal laser sintered AlSi10Mg alloy between different planes. J Manuf Process 37:274–280. https://doi.org/10.1016/j.jmapro.2018.12.005CrossRef

125.

Tan Q, Liu Y, Fan Z, Zhang J, Yin Y, Zhang M-X (2020) Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy. J Mater Sci Technol 58:34–45. https://doi.org/10.1016/j.jmst.2020.03.070CrossRef

126.

Fatoba OS, Akinlabi ET, Akinlab SA, Mwema FM (2019) Characterization of laser additive manufactured Al-Si coating on titanium alloy. Materials Today: Proceedings 18:4675–4682. https://doi.org/10.1016/j.matpr.2019.07.452CrossRef

127.

Qi Z, Cong B, Qi B, Sun H, Zhao G, Ding J (2018) Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys. J Mater Process Technol 255:347–353. https://doi.org/10.1016/j.jmatprotec.2017.12.019CrossRef

128.

Pajerowski DM, Ng R, Peterson N, Zhang Y, Stone MB, Dos Santos AM, Bunn J, Fanelli V (2020) 3D scanning and 3D printing AlSi10Mg single crystal mounts for neutron scattering. Rev Sci Instrum 91(5):053902. https://doi.org/10.1063/5.0008599CrossRef

129.

Aboulkhair NT, Maskery I, Tuck C, Ashcroft I, Everitt NM (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. J Mater Process Technol 230:88–98. https://doi.org/10.1016/j.jmatprotec.2015.11.016CrossRef

130.

Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Additive Manufacturing 1-4:77–86. https://doi.org/10.1016/j.addma.2014.08.001CrossRef

131.

Awd M, Siddique S, Walther F (2020) Microstructural damage and fracture mechanisms of selective laser melted Al-Si alloys under fatigue loading. Theor Appl Fract Mech:106. https://doi.org/10.1016/j.tafmec.2020.102483

132.

Chen Y, Zhang J, Gu X, Dai N, Qin P, Zhang L-C (2018) Distinction of corrosion resistance of selective laser melted Al-12Si alloy on different planes. J Alloys Compd 747:648–658. https://doi.org/10.1016/j.jallcom.2018.03.062CrossRef

133.

Aboulkhair NT, Simonelli M, Parry L, Ashcroft I, Tuck C, Hague R (2019) 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci 106. https://doi.org/10.1016/j.pmatsci.2019.100578

134.

Wilson JM, Piya C, Shin YC, Zhao F, Ramani K (2014) Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis. J Clean Prod 80:170–178. https://doi.org/10.1016/j.jclepro.2014.05.084CrossRef

135.

Cinca N, Rebled JM, Estradé S, Peiró F, Fernández J, Guilemany JM (2013) Influence of the particle morphology on the cold gas spray deposition behaviour of titanium on aluminum light alloys. J Alloys Compd 554:89–96. https://doi.org/10.1016/j.jallcom.2012.11.069CrossRef

136.

Z-y C, Zhang C, Wang R-c, C-q P, Qiu K, Wang N-g (2016) Effect of pre-annealing on microstructure and compactibility of gas-atomized Al-Si alloy powders. Trans Nonferrous Metals Soc China 26(9):2355–2362. https://doi.org/10.1016/s1003-6326(16)64357-1CrossRef

137.

Matthews MJ, Guss G, Khairallah SA, Rubenchik AM, Depond PJ, King WE (2016) Denudation of metal powder layers in laser powder bed fusion processes. Acta Mater 114:33–42. https://doi.org/10.1016/j.actamat.2016.05.017CrossRef

138.

du Plessis A, Yadroitsava I, Yadroitsev I (2020) Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights. Mater Des 187. https://doi.org/10.1016/j.matdes.2019.108385

139.

Ravi P (2020) Understanding the relationship between slicing and measured fill density in material extrusion 3D printing towards precision porosity constructs for biomedical and pharmaceutical applications. 3D Print Med 6(1):10. https://doi.org/10.1186/s41205-020-00063-8CrossRef

140.

Williams RJ, Piglione A, Rønneberg T, Jones C, Pham M-S, Davies CM, Hooper PA (2019) In situ thermography for laser powder bed fusion: effects of layer temperature on porosity, microstructure and mechanical properties. Additive Manufacturing 30. https://doi.org/10.1016/j.addma.2019.100880

141.

Kistler NA, Corbin DJ, Nassar AR, Reutzel EW, Beese AM (2019) Effect of processing conditions on the microstructure, porosity, and mechanical properties of Ti-6Al-4V repair fabricated by directed energy deposition. J Mater Process Technol 264:172–181. https://doi.org/10.1016/j.jmatprotec.2018.08.041CrossRef

142.

Gu J, Ding J, Williams SW, Gu H, Ma P, Zhai Y (2016) The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys. J Mater Process Technol 230:26–34. https://doi.org/10.1016/j.jmatprotec.2015.11.006CrossRef

143.

Vildanov AM, Babkin KD, Alekseeva EV (2020) Macro defects in direct laser deposition process. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.01.041

144.

Mahamood RM, Akinlabi ET (2015) Effect of laser power and powder flow rate on the wear resistance behaviour of laser metal deposited TiC/Ti6Al4V composites. Materials Today: Proceedings 2(4-5):2679–2686. https://doi.org/10.1016/j.matpr.2015.07.233CrossRef

145.

Sun R, Shi Y, Wang X, Guo Y, Zhou X (2020) Investigation of laser assisted ultra-high frequency induction deposition method: processes, fluid flow, and microstructure characteristic. Journal of Materials Research and Technology 9(3):2773–2792. https://doi.org/10.1016/j.jmrt.2020.01.012CrossRef

146.

Kaplanskii YY, Zaitsev AA, Sentyurina ZA, Levashov EA, Pogozhev YS, Loginov PA, Logachev IA (2018) The structure and properties of pre-alloyed NiAl-Cr(Co,Hf) spherical powders produced by plasma rotating electrode processing for additive manufacturing. Journal of Materials Research and Technology 7(4):461–468. https://doi.org/10.1016/j.jmrt.2018.01.003CrossRef

147.

Fallah V, Alimardani M, Corbin SF, Khajepour A (2011) Temporal development of melt-pool morphology and clad geometry in laser powder deposition. Comput Mater Sci 50(7):2124–2134. https://doi.org/10.1016/j.commatsci.2011.02.018CrossRef

148.

Bax B, Rajput R, Kellet R, Reisacher M (2018) Systematic evaluation of process parameter maps for laser cladding and directed energy deposition. Additive Manufacturing 21:487–494. https://doi.org/10.1016/j.addma.2018.04.002CrossRef

149.

Nowotny S, Scharek S, Beyer E, Richter K-H (2007) Laser beam build-up welding: precision in repair, surface cladding, and direct 3D metal deposition. J Therm Spray Technol 16(3):344–348. https://doi.org/10.1007/s11666-007-9028-5CrossRef

150.

Siddique S, Imran M, Walther F (2017) Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy. Int J Fatigue 94:246–254. https://doi.org/10.1016/j.ijfatigue.2016.06.003CrossRef

151.

Zhang H, Zhu H, Nie X, Yin J, Hu Z, Zeng X (2017) Effect of zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy. Scr Mater 134:6–10. https://doi.org/10.1016/j.scriptamat.2017.02.036CrossRef

152.

Weber K, Wang Z, Thiele S, Herkommer A, Giessen H (2020) Distortion-free multi-element Hypergon wide-angle micro-objective obtained by femtosecond 3D printing. Opt Lett 45(10):2784–2787. https://doi.org/10.1364/OL.392253CrossRef

153.

Šturm R, Žnidaršič M, Grum J (2013) Crack-growth behavior of laser surface-alloyed low-carbon steel. J Mater Eng Perform 22(9):2542–2549. https://doi.org/10.1007/s11665-013-0549-4CrossRef

154.

Zheng HY, Guan YC, Wang XC, Wang ZK (2015) Tailoring material properties induced by laser surface processing. In: Laser Surface Engineering. pp 317-357. doi:https://doi.org/10.1016/b978-1-78242-074-3.00013-1

155.

Su R, Park SH, Li Z, McAlpine MC (2019) 3D printed electronic materials and devices. In: Robotic systems and autonomous platforms. pp 309-334. doi:https://doi.org/10.1016/b978-0-08-102260-3.00013-5

156.

Chen Y, Clark SJ, Collins DM, Marussi S, Hunt SA, Fenech DM, Connolley T, Atwood RC, Magdysyuk OV, Baxter GJ, Jones MA, Leung CLA, Lee PD (2021) Correlative synchrotron X-ray imaging and diffraction of directed energy deposition additive manufacturing. Acta Mater:209. https://doi.org/10.1016/j.actamat.2021.116777

157.

Yoshida N, Dohi O, Inoue K, Itoh Y (2020) The efficacy of polyp detection and tumor characterization of blue laser imaging, blue light imaging, and linked color imaging with light-emitted diode (LED) and LASER endoscope. Ann Transl Med 8(5):152. https://doi.org/10.21037/atm.2020.02.01CrossRef

158.

Saxena N, Hofmann R, Alpak FO, Dietderich J, Hunter S, Day-Stirrat RJ (2017) Effect of image segmentation & voxel size on micro-CT computed effective transport & elastic properties. Mar Pet Geol 86:972–990. https://doi.org/10.1016/j.marpetgeo.2017.07.004CrossRef

159.

Abouelsayed A, Ebrahim MR, El Hotaby W, Hassan SA, Al-Ashkar E (2017) Terahertz acoustic phonon detection from a compact surface layer of spherical nanoparticles powder mixture of aluminum, alumina and multi-walled carbon nanotube. Spectrochim Acta A Mol Biomol Spectrosc 185:179–187. https://doi.org/10.1016/j.saa.2017.05.052CrossRef

160.

Wong HS, Head MK, Buenfeld NR (2006) Pore segmentation of cement-based materials from backscattered electron images. Cem Concr Res 36(6):1083–1090. https://doi.org/10.1016/j.cemconres.2005.10.006CrossRef

161.

Beatriceveena TV, Prabhu E, Jayaraman V, Gnanasekar KI (2019) X-ray photoelectron and Hall studies on nanostructured thin films of PbS grown by pulsed laser deposition. Mater Lett 238:324–327. https://doi.org/10.1016/j.matlet.2018.12.038CrossRef

162.

Gabric D, Blaskovic M, Gjorgijevska E, Mladenov M, Tasic B, Juric IB, Ban T (2016) Evaluation of bone healing after osteotomies prepared with Er:YAG laser in contact and noncontact modes and piezosurgery--an animal study. J Oral Maxillofac Surg 74(1):18–28. https://doi.org/10.1016/j.joms.2015.08.017CrossRef

163.

Lotin AA, Novodvorsky OA, Zuev DA, Khramova OD, Parshina LS, Lebedev FV, Bartha JW, Wenzel C (2013) Influence of growth temperature on physical properties of ZnO films produced by pulsed laser deposition method. Opt Mater 35(8):1564–1570. https://doi.org/10.1016/j.optmat.2013.03.027CrossRef

164.

Krishna LR, Madhavi Y, Sahithi T, Wasekar NP, Chavan NM, Rao DS (2018) Influence of prior shot peening variables on the fatigue life of micro arc oxidation coated 6061-T6 Al alloy. Int J Fatigue 106:165–174. https://doi.org/10.1016/j.ijfatigue.2017.09.020CrossRef

165.

Aboulkhair NT, Maskery I, Tuck C, Ashcroft I, Everitt NM (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Mater Des 104:174–182. https://doi.org/10.1016/j.matdes.2016.05.041CrossRef

166.

Sun S, Liu P, Hu J, Hong C, Qiao X, Liu S, Zhang R, Wu C (2019) Effect of solid solution plus double aging on microstructural characterization of 7075 Al alloys fabricated by selective laser melting (SLM). Opt Laser Technol 114:158–163. https://doi.org/10.1016/j.optlastec.2019.02.006CrossRef

167.

Hong S-T, Das H, Oh H-S, Nasim MNEAA, Chun D-M (2017) Combination of nano-particle deposition system and friction stir spot welding for fabrication of carbon/aluminum metal matrix composite joints of dissimilar aluminum alloys. CIRP Ann 66(1):261–264. https://doi.org/10.1016/j.cirp.2017.04.115CrossRef

168.

He X, Xiong B, Sun Z, Zhang Y, Wang F, Zhu B (2008) Solidification microstructures of Al-Zn-Mg-Cu alloys prepared by spray deposition and conventional casting methods. Rare Metals 27(2):210–215. https://doi.org/10.1016/s1001-0521(08)60117-5CrossRef

169.

Huang Y, Ansari M, Asgari H, Farshidianfar MH, Sarker D, Khamesee MB, Toyserkani E (2019) Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing). J Mater Process Technol 274. https://doi.org/10.1016/j.jmatprotec.2019.116286

170.

Hu Q, Feng D, Zhang H, Yao Y, Aburaia M, Lammer H (2020) Oriented to multi-branched structure unsupported 3D printing method research. Materials (Basel) 13(9). https://doi.org/10.3390/ma13092023

171.

Cai Z, Zhang C, Wang R, Peng C, Qiu K, Feng Y (2015) Preparation of Al–Si alloys by a rapid solidification and powder metallurgy route. Mater Des 87:996–1002. https://doi.org/10.1016/j.matdes.2015.08.106CrossRef

172.

Wei HL, Elmer JW, DebRoy T (2016) Origin of grain orientation during solidification of an aluminum alloy. Acta Mater 115:123–131. https://doi.org/10.1016/j.actamat.2016.05.057CrossRef

173.

G-c L, Ma Y, He X-l, Li W, P-y L (2012) Damping capacity of high strength-damping aluminum alloys prepared by rapid solidification and powder metallurgy process. Trans Nonferrous Metals Soc China 22(5):1112–1117. https://doi.org/10.1016/s1003-6326(11)61291-0CrossRef

174.

Sun Z, Guo W, Li L (2020) Numerical modelling of heat transfer, mass transport and microstructure formation in a high deposition rate laser directed energy deposition process. Additive Manufacturing 33. https://doi.org/10.1016/j.addma.2020.101175

175.

Anandkumar R, Almeida A, Vilar R, Ocelík V, De Hosson JTM (2009) Influence of powder particle injection velocity on the microstructure of Al–12Si/SiCp coatings produced by laser cladding. Surf Coat Technol 204(3):285–290. https://doi.org/10.1016/j.surfcoat.2009.07.025CrossRef

176.

Xiao R, Zhang X (2014) Problems and issues in laser beam welding of aluminum–lithium alloys. J Manuf Process 16(2):166–175. https://doi.org/10.1016/j.jmapro.2013.10.005CrossRef

177.

Cao X, Wallace W, Immarigeon JP, Poon C (2003) Research and progress in laser welding of wrought aluminum alloys. II. Metallurgical microstructures, defects, and mechanical properties. Mater Manuf Process 18(1):23–49. https://doi.org/10.1081/amp-120017587CrossRef

178.

Bai JY, Fan CL, Lin S, Yang CL, Dong BL (2016) Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing. Int J Adv Manuf Technol 87(9-12):2615–2623. https://doi.org/10.1007/s00170-016-8633-1CrossRef

179.

Heard DW, Gauvin R, Brochu M (2014) Microstructural investigation of controlled short circuiting gas metal arc welding deposited aluminium–lithium alloy. Can Metall Q 53(4):416–422. https://doi.org/10.1179/1879139514y.0000000146CrossRef

180.

Zhang J, Yan L, Li W, Liou F (2018) A two-dimensional simulation of grain structure growth within substrate and fusion zone during direct metal deposition. In: Additive manufacturing of high-performance metals and alloys - modeling and optimization. https://doi.org/10.5772/intechopen.73107

181.

DePond PJ, Guss G, Ly S, Calta NP, Deane D, Khairallah S, Matthews MJ (2018) In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry. Mater Des 154:347–359. https://doi.org/10.1016/j.matdes.2018.05.050CrossRef

182.

Hanna W, Maung K, Enayati M, Earthman JC, Mohamed FA (2019) Grain size stability in a cryomilled nanocrystalline Al alloy powders containing diamantane nanoparticles. Mater Sci Eng A 746:290–299. https://doi.org/10.1016/j.msea.2018.10.006CrossRef

183.

Enz J, Lolos C, Riekehr S (2018) Influence of different Al-Cu substrates on the properties of laser metal deposited Al coatings. Procedia CIRP 74(1):127–130. https://doi.org/10.1016/j.procir.2018.08.060CrossRef

184.

Qin H, Fallah V, Dong Q, Brochu M, Daymond MR, Gallerneault M (2018) Solidification pattern, microstructure and texture development in laser powder bed fusion (LPBF) of Al10SiMg alloy. Mater Charact 145:29–38. https://doi.org/10.1016/j.matchar.2018.08.025CrossRef

185.

Bhattacharya S, Dinda GP, Dasgupta AK, Mazumder J (2013) A comparative study of microstructure and mechanical behavior of CO2 and diode laser deposited Cu–38Ni alloy. J Mater Sci 49(6):2415–2429. https://doi.org/10.1007/s10853-013-7883-7CrossRef

186.

Wang Z, Palmer TA, Beese AM (2016) Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Mater 110:226–235. https://doi.org/10.1016/j.actamat.2016.03.019CrossRef

187.

Manvatkar V, De A, DebRoy T (2014) Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol 31(8):924–930. https://doi.org/10.1179/1743284714y.0000000701CrossRef

188.

Dinda GP, Dasgupta AK, Mazumder J (2012) Texture control during laser deposition of nickel-based superalloy. Scr Mater 67(5):503–506. https://doi.org/10.1016/j.scriptamat.2012.06.014CrossRef

189.

Yang Q, Liu YT, Liu J, Wang L, Chen Z, Wang ML, Zhong SY, Wu Y, Wang HW (2019) Microstructure evolution of the rapidly solidified alloy powders and composite powders. Mater Des:182. https://doi.org/10.1016/j.matdes.2019.108045

190.

Heard DW, Boselli J, Rioja R, Marquis EA, Gauvin R, Brochu M (2013) Interfacial morphology development and solute trapping behavior during rapid solidification of an Al–Li–Cu alloy. Acta Mater 61(5):1571–1580. https://doi.org/10.1016/j.actamat.2012.11.034CrossRef

191.

Heard DW, Gauvin R, Brochu M (2013) Non-equilibrium solute partitioning in a laser re-melted Al–Li–Cu alloy. Acta Mater 61(19):7432–7436. https://doi.org/10.1016/j.actamat.2013.08.050CrossRef

192.

Cepeda-Jiménez CM, Potenza F, Magalini E, Luchin V, Molinari A, Pérez-Prado MT (2020) Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. Mater Charact 163. https://doi.org/10.1016/j.matchar.2020.110238

193.

Liu Z, Zhao Z, Liu J, Wang L, Yang G, Gong S, Wang Q, Yang R (2019) Effect of α texture on the tensile deformation behavior of Ti–6Al–4V alloy produced via electron beam rapid manufacturing. Mater Sci Eng A 742:508–516. https://doi.org/10.1016/j.msea.2018.11.012CrossRef

194.

Wang X, He X, Wang T, Li Y (2020) The influence of the microtexture and orientation of columnar grains on the fatigue crack growth of directed energy deposited Ti-6.5Al-2Zr-Mo-V alloys. Additive Manufacturing 35. https://doi.org/10.1016/j.addma.2020.101174

195.

Waryoba DR, Keist JS, Ranger C, Palmer TA (2018) Microtexture in additively manufactured Ti-6Al-4V fabricated using directed energy deposition. Mater Sci Eng A 734:149–163. https://doi.org/10.1016/j.msea.2018.07.098CrossRef

196.

Shon Y, Joshi SS, Katakam S, Shanker Rajamure R, Dahotre NB (2015) Laser additive synthesis of high entropy alloy coating on aluminum: corrosion behavior. Mater Lett 142:122–125. https://doi.org/10.1016/j.matlet.2014.11.161CrossRef

197.

Zavala-Arredondo M, London T, Allen M, Maccio T, Ward S, Griffiths D, Allison A, Goodwin P, Hauser C (2019) Use of power factor and specific point energy as design parameters in laser powder-bed-fusion (L-PBF) of AlSi10Mg alloy. Mater Des 182. https://doi.org/10.1016/j.matdes.2019.108018

198.

Imran MK, Masood SH, Brandt M, Bhattacharya S, Mazumder J (2011) Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: evaluation of mechanical properties. Mater Sci Eng A 528(9):3342–3349. https://doi.org/10.1016/j.msea.2010.12.099CrossRef

199.

Wei K, Lv M, Zeng X, Xiao Z, Huang G, Liu M, Deng J (2019) Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy. Mater Charact 150:67–77. https://doi.org/10.1016/j.matchar.2019.02.010CrossRef

200.

Qu HP, Li P, Zhang SQ, Li A, Wang HM (2010) The effects of heat treatment on the microstructure and mechanical property of laser melting deposition γ-TiAl intermetallic alloys. Mater Des 31(4):2201–2210. https://doi.org/10.1016/j.matdes.2009.10.045CrossRef

201.

Li M, Gazquez J, Borisevich A, Mishra R, Flores KM (2018) Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method. Intermetallics 95:110–118. https://doi.org/10.1016/j.intermet.2018.01.021CrossRef

202.

Ageev EI, Andreeva YM, Ionin AA, Kashaev NS, Kudryashov SI, Nikonorov NV, Nuryev RK, Petrov AA, Rudenko AA, Samokhvalov AA, Saraeva IN, Veiko VP (2020) Single-shot femtosecond laser processing of Al-alloy surface: an interplay between Mbar shock waves, enhanced microhardness, residual stresses, and chemical modification. Opt Laser Technol 126. https://doi.org/10.1016/j.optlastec.2020.106131

203.

Singh A, Ramakrishnan A, Dinda G (2017) Direct laser metal deposition of Al 7050 alloy. Paper presented at the SAE Technical Paper Series,

204.

Zhao T, Dahmen M, Cai W, Alkhayat M, Schaible J, Albus P, Zhong C, Hong C, Biermann T, Zhang H, Gu D, Weisheit A, Gasser A, Schleifenbaum JH (2020) Laser metal deposition for additive manufacturing of AA5024 and nanoparticulate TiC modified AA5024 alloy composites prepared with balling milling process. Opt Laser Technol 131. https://doi.org/10.1016/j.optlastec.2020.106438

205.

Li C, Sun S, Liu C, Lu Q, Ma P, Wang Y (2019) Microstructure and mechanical properties of TiC/AlSi10Mg alloy fabricated by laser additive manufacturing under high-frequency micro-vibration. J Alloys Compd 794:236–246. https://doi.org/10.1016/j.jallcom.2019.04.287CrossRef

206.

Awd M, Tenkamp J, Hirtler M, Siddique S, Bambach M, Walther F (2017) Comparison of microstructure and mechanical properties of Scalmalloy((R)) produced by selective laser melting and laser metal deposition. Materials (Basel) 11(1). https://doi.org/10.3390/ma11010017

207.

Froend M, Ventzke V, Riekehr S (2018) Microstructure and hardness evolution of laser metal deposited AA5087 wall-structures. Procedia CIRP 74(1):131–135. https://doi.org/10.1016/j.procir.2018.08.062CrossRef

208.

Gu J, Yang S, Gao M, Bai J, Zhai Y, Ding J (2020) Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling. Mater Des:186. https://doi.org/10.1016/j.matdes.2019.108288

209.

Vora P, Mumtaz K, Todd I, Hopkinson N (2015) AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting. Additive Manufacturing 7:12–19. https://doi.org/10.1016/j.addma.2015.06.003CrossRef

210.

Dai J, Zhang F, Wang A, Yu H, Chen C (2017) Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying. Surf Coat Technol 309:805–813. https://doi.org/10.1016/j.surfcoat.2016.10.082CrossRef

211.

Grigoriev SN, Tarasova TV, Gvozdeva GO, Nowotny S (2015) Solidification behaviour during laser microcladding of Al–Si alloys. Surf Coat Technol 268:303–309. https://doi.org/10.1016/j.surfcoat.2014.08.001CrossRef

212.

Carcel B, Sampedro J, Ruescas A, Toneu X (2011) Corrosion and wear resistance improvement of magnesium alloys by laser cladding with Al-Si. Phys Procedia 12:353–363. https://doi.org/10.1016/j.phpro.2011.03.045CrossRef

213.

Watson TJ, Nardi A, Ernst AT, Cernatescu I, Bedard BA, Aindow M (2017) Cold spray deposition of an icosahedral-phase-strengthened aluminum alloy coating. Surf Coat Technol 324:57–63. https://doi.org/10.1016/j.surfcoat.2017.05.049CrossRef

214.

Sirvent P, Garrido MA, Múnez CJ, Poza P, Vezzù S (2018) Effect of higher deposition temperatures on the microstructure and mechanical properties of Al 2024 cold sprayed coatings. Surf Coat Technol 337:461–470. https://doi.org/10.1016/j.surfcoat.2018.01.055CrossRef

215.

Schmidtke K, Palm F, Hawkins A, Emmelmann C (2011) Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing. Phys Procedia 12:369–374. https://doi.org/10.1016/j.phpro.2011.03.047CrossRef

216.

Su S, Lu Y (2019) Laser directed energy deposition of Zr-based bulk metallic glass composite with tensile strength. Mater Lett 247:79–81. https://doi.org/10.1016/j.matlet.2019.03.111CrossRef

217.

Yang KV, Rometsch P, Jarvis T, Rao J, Cao S, Davies C, Wu X (2018) Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting. Mater Sci Eng A 712:166–174. https://doi.org/10.1016/j.msea.2017.11.078CrossRef

218.

Zhao S, Yuan K, Guo W, He Y, Xu Y, Lin X (2020) A comparative study of laser metal deposited and forged Ti-6Al-4V alloy: uniaxial mechanical response and vibration fatigue properties. Int J Fatigue 136. https://doi.org/10.1016/j.ijfatigue.2020.105629

219.

He X, Wang T, Wang X, Zhan W, Li Y (2018) Fatigue behavior of direct laser deposited Ti-6.5Al-2Zr-1Mo-1V titanium alloy and its life distribution model. Chin J Aeronaut 31(11):2124–2135. https://doi.org/10.1016/j.cja.2018.09.003CrossRef

220.

Lu S, Bao R, Wang K, Liu D, Wu Y, Fei B (2017) Fatigue crack growth behaviour in laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy. Mater Sci Eng A 690:378–386. https://doi.org/10.1016/j.msea.2017.03.001CrossRef

221.

Zhao Z, Chen J, Tan H, Tang J, Lin X (2020) In situ tailoring microstructure in laser solid formed titanium alloy for superior fatigue crack growth resistance. Scr Mater 174:53–57. https://doi.org/10.1016/j.scriptamat.2019.08.028CrossRef

222.

Xu ZW, Wang Q, Wang XS, Tan CH, Guo MH, Gao PB (2020) High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting. Mech Mater 148. https://doi.org/10.1016/j.mechmat.2020.103499

223.

Kim Y-K, Park S-H, Yu J-H, AlMangour B, Lee K-A (2018) Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting. Mater Sci Eng A 715:33–40. https://doi.org/10.1016/j.msea.2017.12.085CrossRef

224.

Huttunen-Saarivirta E, Heino V, Vaajoki A, Hakala TJ, Ronkainen H (2019) Wear of additively manufactured tool steel in contact with aluminium alloy. Wear:432–433. https://doi.org/10.1016/j.wear.2019.202934

225.

Rao Y, Wang Q, Oka D, Ramachandran CS (2020) On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof. Surf Coat Technol 383. https://doi.org/10.1016/j.surfcoat.2019.125271

226.

Naiju CD, Anil PM (2017) Influence of operating parameters on the reciprocating sliding wear of direct metal deposition (DMD) components using Taguchi method. Procedia Engineering 174:1016–1027. https://doi.org/10.1016/j.proeng.2017.01.254CrossRef

227.

Huang C, Li W, Xie Y, Planche M-P, Liao H, Montavon G (2017) Effect of substrate type on deposition behavior and wear performance of Ni-coated graphite/Al composite coatings deposited by cold spraying. J Mater Sci Technol 33(4):338–346. https://doi.org/10.1016/j.jmst.2016.11.016CrossRef

228.

Zhao G, Ashcroft IA, Hague RJM, Kennedy AR, Clare AT (2018) Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication. Mater Des 149:63–72. https://doi.org/10.1016/j.matdes.2018.03.071CrossRef

229.

Shabgard M, Khosrozadeh B (2017) Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process. J Manuf Process 25:212–219. https://doi.org/10.1016/j.jmapro.2016.11.016CrossRef

230.

Fielden-Stewart Z, Coope T, Bacheva D, Kim BC (2020) Effect of the surface morphology of SLM printed aluminium on the interfacial fracture toughness of metal-composite hybrid joints. Int J Adhes Adhes. https://doi.org/10.1016/j.ijadhadh.2020.102779

231.

Zhou J, Li H, Yu Y, Firouzian K, Qian Y, Lin F (2020) Characterization of interfacial transition zone of functionally graded materials with graded composition from a single material in electron beam powder bed fusion. J Alloys Compd:832. https://doi.org/10.1016/j.jallcom.2020.154774

232.

Barua S, Liou F, Newkirk J, Sparks T (2014) Vision-based defect detection in laser metal deposition process. Rapid Prototyp J 20(1):77–85. https://doi.org/10.1108/rpj-04-2012-0036CrossRef

233.

Oliveira JP, LaLonde AD, Ma J (2020) Processing parameters in laser powder bed fusion metal additive manufacturing. Mater Des:193. https://doi.org/10.1016/j.matdes.2020.108762

234.

Grasso M, Colosimo BM (2019) A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion. Robot Comput Integr Manuf 57:103–115. https://doi.org/10.1016/j.rcim.2018.11.007CrossRef

235.

Zhang W, Tong M, Harrison NM (2019) Resolution, energy and time dependency on layer scaling in finite element modelling of laser beam powder bed fusion additive manufacturing. Additive Manufacturing 28:610–620. https://doi.org/10.1016/j.addma.2019.05.002CrossRef

236.

Prashanth KG, Eckert J (2017) Formation of metastable cellular microstructures in selective laser melted alloys. J Alloys Compd 707:27–34. https://doi.org/10.1016/j.jallcom.2016.12.209CrossRef

237.

Demir AG, Previtali B (2017) Multi-material selective laser melting of Fe/Al-12Si components. Manufacturing Letters 11:8–11. https://doi.org/10.1016/j.mfglet.2017.01.002CrossRef

238.

Croteau JR, Griffiths S, Rossell MD, Leinenbach C, Kenel C, Jansen V, Seidman DN, Dunand DC, Vo NQ (2018) Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting. Acta Mater 153:35–44. https://doi.org/10.1016/j.actamat.2018.04.053CrossRef

239.

Wang P, Gammer C, Brenne F, Prashanth KG, Mendes RG, Rümmeli MH, Gemming T, Eckert J, Scudino S (2018) Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting. Mater Sci Eng A 711:562–570. https://doi.org/10.1016/j.msea.2017.11.063CrossRef

240.

Hadadzadeh A, Amirkhiz BS, Shakerin S, Kelly J, Li J, Mohammadi M (2020) Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg cast alloy substrate. Additive Manufacturing 31. https://doi.org/10.1016/j.addma.2019.100937

241.

Wang XJ, Zhang LC, Fang MH, Sercombe TB (2014) The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy. Mater Sci Eng A 597:370–375. https://doi.org/10.1016/j.msea.2014.01.012CrossRef

242.

Zhang H, Zhu H, Qi T, Hu Z, Zeng X (2016) Selective laser melting of high strength Al–Cu–Mg alloys: processing, microstructure and mechanical properties. Mater Sci Eng A 656:47–54. https://doi.org/10.1016/j.msea.2015.12.101CrossRef

243.

Takata N, Kodaira H, Sekizawa K, Suzuki A, Kobashi M (2017) Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments. Mater Sci Eng A 704:218–228. https://doi.org/10.1016/j.msea.2017.08.029CrossRef

244.

Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM (2017) 3D printing of high-strength aluminium alloys. Nature 549(7672):365–369. https://doi.org/10.1038/nature23894CrossRef

245.

Montero-Sistiaga ML, Mertens R, Vrancken B, Wang X, Van Hooreweder B, Kruth J-P, Van Humbeeck J (2016) Changing the alloy composition of Al7075 for better processability by selective laser melting. J Mater Process Technol 238:437–445. https://doi.org/10.1016/j.jmatprotec.2016.08.003CrossRef

246.

Pauly S, Wang P, Kühn U, Kosiba K (2018) Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu. Additive Manufacturing 22:753–757. https://doi.org/10.1016/j.addma.2018.05.034CrossRef

247.

Wei C, Gu H, Sun Z, Cheng D, Chueh Y-H, Zhang X, Huang Y, Li L (2019) Ultrasonic material dispensing-based selective laser melting for 3D printing of metallic components and the effect of powder compression. Additive Manufacturing 29. https://doi.org/10.1016/j.addma.2019.100818

248.

Kurian S, Mirzaeifar R (2020) Selective laser melting of aluminum nano-powder particles, a molecular dynamics study. Additive Manufacturing 35. https://doi.org/10.1016/j.addma.2020.101272

249.

Nosova E, Baliakin A, Galkina N, Alekseev V (2019) Research of titanium covering effect received by selective laser melting on mechanical properties of aluminum alloy Al-6Mg. Materials Today: Proceedings 11:370–374. https://doi.org/10.1016/j.matpr.2018.12.160CrossRef

250.

Ahsan MN, Paul CP, Kukreja LM, Pinkerton AJ (2011) Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation. J Mater Process Technol 211(4):602–609. https://doi.org/10.1016/j.jmatprotec.2010.11.014CrossRef

251.

Gorunov AI (2019) Investigation microstructure of carbon fibers reinforced composite on Fe and Ni-based obtained by laser metal deposition. Surf Coat Technol 364:279–288. https://doi.org/10.1016/j.surfcoat.2019.03.006CrossRef

252.

Li W, Karnati S, Zhang Y, Liou F (2018) Investigating and eliminating powder separation in pre-mixed powder supply for laser metal deposition process. J Mater Process Technol 254:294–301. https://doi.org/10.1016/j.jmatprotec.2017.11.045CrossRef

253.

Graf B, Ammer S, Gumenyuk A, Rethmeier M (2013) Design of experiments for laser metal deposition in maintenance, repair and overhaul applications. Procedia CIRP 11:245–248. https://doi.org/10.1016/j.procir.2013.07.031CrossRef

254.

Shamsaei N, Yadollahi A, Bian L, Thompson SM (2015) An overview of direct laser deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control. Additive Manufacturing 8:12–35. https://doi.org/10.1016/j.addma.2015.07.002CrossRef

255.

Du W, Bai Q, Zhang B (2016) A novel method for additive/subtractive hybrid manufacturing of metallic parts. Procedia Manufacturing 5:1018–1030. https://doi.org/10.1016/j.promfg.2016.08.067CrossRef

256.

Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS (2016) The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 61(5):315–360. https://doi.org/10.1080/09506608.2015.1116649CrossRef

257.

Li L, Haghighi A, Yang Y (2018) Theoretical modelling and prediction of surface roughness for hybrid additive–subtractive manufacturing processes. IISE Transactions 51(2):124–135. https://doi.org/10.1080/24725854.2018.1458268CrossRef

258.

Song J, Wu W, Zhang L, He B, Lu L, Ni X, Long Q, Zhu G (2018) Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting. Optik 170:342–352. https://doi.org/10.1016/j.ijleo.2018.05.128CrossRef

259.

Zhang C, Gao M, Chen C, Zeng X (2019) Spectral diagnosis of wire arc additive manufacturing of Al alloys. Additive Manufacturing 30. https://doi.org/10.1016/j.addma.2019.100869

Springer Professional

3D printing of aluminum alloys using laser powder deposition: a review

Abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partner

Marktübersichten

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2021

Dissolution of delta phase in Ni-based superalloy during linear friction welding: integrated multiphysics computational process modelling

Geometry and surface characteristics of H13 hot-work tool steel manufactured using laser-directed energy deposition

Additive seam tracking technology based on laser vision

Improving the durability of tillage tools through surface modification—a review

Study on the abrasive retention capacity on the surface of electroplated diamond wire saw

Correction to: Superficial residual stress, microstructure, and efficiency in similar joints of AA2024-T3 and AA7475-T761 aluminum alloys formed by friction stir welding

Premium Partner

Marktübersichten