1986 | OriginalPaper | Buchkapitel
5-cm, No Iron SSC 6-m Dipole Test Program
verfasst von : P. O. Mazur, J. A. Carson, N. H. Engler, H. E. Fisk, J. D. Gonczy, R. W. Hanft, M. Kuchnir, P. M. Mantsch, A. D. McInturff, T. H. Nicol, R. C. Niemann, E. E. Schmidt, A. Szymulanski
Erschienen in: Advances in Cryogenic Engineering
Verlag: Springer US
Enthalten in: Professional Book Archive
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Magnet Design B for the Superconducting Super Collider (SSC) consists of a 5 cm diameter collared coil assembly 12 m long with concentric aluminum thermal shields at 10 K and 80 K, a G-10 post type support system and a minimal iron vacuum vessel located at a large radius from the coil. In order to determine the behavior of such a magnet under both direct current and quenching conditions, a 6 m model was built using Tevatron tooling to produce a 7.6 cm diameter coil. The dc operation demonstrated that the post type suspension has acceptable rigidity. Distortions in the aluminum thermal shield during quench resulted from stresses in the material below the yield values. Temperature increases in the thermal shield due to eddy currents were larger than those calculated using simple assumptions, demonstrating the value of using a model to verify eddy current behavior in complex situations.