nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

A Combined Experimental/Finite Element Model Analysis on Compressive Behavior of Tamarind Pod Shell Filler Reinforced Composites

verfasst von : Santosha Goudar, Ravi Kant Jain, Debashis Das

Erschienen in: Machines, Mechanism and Robotics

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The purpose of this work is to study the compressive behavior of Tamarind Pod Shell (TPS) reinforced epoxy composite using an experimental and finite element (FE) modeling approach. The compressive behavior of the composites was investigated based on the different particle sizes (75, 105, 150, and 250 μm) and NaOH treatment (5 wt%). The developed FE model validated the compressive strength using the representative volume element (RVE). The surface treatment was implemented in the FE model to compare with experimentally NaOH-treated TPS composites. The results revealed that good agreement between the FE and experimental results. This shows the accuracy and adaptability of the TPS filler reinforced composite model.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Effect of Structural Characteristics on Kinematics of Planar Kinematic Chains

Nächstes Kapitel Workspace Evaluation of Robotino-XT Under Reconfiguration

Naveen J, Jawaid M, Zainudin ES, Sultan MTH, Yahaya R (2019) Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos Nucifera sheath reinforced epoxy composites. J Mater Res Technol 8:1308–1318. https://doi.org/10.1016/j.jmrt.2018.07.023CrossRef

Babu NBK, Muthukumaran S, Arokiasamy S, Ramesh T (2018) Thermal and mechanical behavior of the coir powder filled polyester micro-composites. J Nat Fibers 1–11. https://doi.org/10.1080/15440478.2018.1555503

Singh AA, Afrin S, Karim Z (2017) Green composites: versatile material for future

Sajith S, Arumugam V, Dhakal HN (2017) Comparison on mechanical properties of lignocellulosic flour epoxy composites prepared by using coconut shell, rice husk and teakwood as fillers. Polym Test 58:60–69. https://doi.org/10.1016/j.polymertesting.2016.12.015CrossRef

Sathishkumar TP, Kumar SA, Navaneethakrishnan P, Siva I, Rajini N (2018) Synergy of cashew nut shell filler on tribological behaviors of natural-fiber-reinforced epoxy composite. Sci Eng Compos Mater 25:761–772. https://doi.org/10.1515/secm-2016-0243CrossRef

Ikladious N, Shukry N, El-Kalyoubi S, Asaad J, Mansour S, Tawfik S, Abou-Zeid R (2017) Eco-friendly composites based on peanut shell powder/unsaturated polyester resin. Proc Inst Mech Eng Part L J Mater Des Appl 146442071772237. https://doi.org/10.1177/1464420717722377

Güngör A, Akbay IK, Özdemir T (2019) Waste walnut shell as an alternative bio-based filler for the EPDM: mechanical, thermal, and kinetic studies. J Mater Cycles Waste Manag 21:145–155. https://doi.org/10.1007/s10163-018-0778-6CrossRef

Stalin B, Nagaprasad N, Vignesh V, Ravichandran M (2019) Evaluation of mechanical and thermal properties of tamarind seed filler reinforced vinyl ester composites. J Vinyl Add Technol 25:E114–E128. https://doi.org/10.1002/vnl.21701CrossRef

Tan W, Hao X, Fan Q, Sun L, Xu J, Wang Q, Ou R (2019) Bamboo particle reinforced polypropylene composites made from different fractions of bamboo culm: fiber characterization and analysis of composite properties. Polym Compos 25329. https://doi.org/10.1002/pc.25329

10.

Boran Torun S, Pesman E, Donmez Cavdar A (2019) Effect of alkali treatment on composites made from recycled polyethylene and chestnut cupula. Polym Compos 25305. https://doi.org/10.1002/pc.25305

11.

Sharma H, Singh I, Misra JP (2019) Mechanical and thermal behaviour of food waste (Citrus limetta peel) fillers–based novel epoxy composites. Polym Polym Compos 096739111985101. https://doi.org/10.1177/0967391119851012

12.

Lala SD, Deoghare AB, Chatterjee S (2019) Effect of dual pre-treatment on mechanical, morphological, electrical and thermal properties of rubber seed shell-reinforced epoxy composites. Arab J Sci Eng 44:845–856. https://doi.org/10.1007/s13369-018-3302-3

13.

Agunsoye JO, Odumosu AK, Dada O (2019) Novel epoxy-carbonized coconut shell nanoparticles composites for car bumper application. Int J Adv Manuf Technol 102:893–899. https://doi.org/10.1007/s00170-018-3206-0CrossRef

14.

Salasinska K, Barczewski M, Górny R, Kloziński A (2018) Evaluation of highly filled epoxy composites modified with walnut shell waste filler. Polym Bull 75:2511–2528. https://doi.org/10.1007/s00289-017-2163-3CrossRef

15.

Negawo TA, Polat Y, Buyuknalcaci FN, Kilic A, Saba N, Jawaid M (2019) Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites. Compos Struct 207:589–597. https://doi.org/10.1016/j.compstruct.2018.09.043CrossRef

16.

Cai M, Takagi H, Nakagaito AN, Li Y, Waterhouse GIN (2016) Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Compos Part A Appl Sci Manuf 90:589–597. https://doi.org/10.1016/j.compositesa.2016.08.025CrossRef

17.

Oushabi A, Sair S, Oudrhiri Hassani F, Abboud Y, Tanane O, El Bouari A (2017) The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): study of the interface of DPF—polyurethane composite. South African J Chem Eng 23:116–123. https://doi.org/10.1016/j.sajce.2017.04.005CrossRef

18.

Devnani GL, Sinha S (2018) African teff straw as a potential reinforcement in polymer composites for light-weight applications: mechanical, thermal, physical, and chemical characterization before and after alkali treatment. J Nat Fibers 1–15. https://doi.org/10.1080/15440478.2018.1546640

19.

Shanmugasundaram N, Rajendran I (2016) Characterization of raw and alkali-treated mulberry fibers as potential reinforcement in polymer composites. J Reinforced Plastics Compos 35:601–614. https://doi.org/10.1177/0731684415625822CrossRef

20.

Zhang C, Curiel-Sosa JL, Bui TQ (2019) Meso-scale finite element analysis of mechanical behavior of 3D braided composites subjected to biaxial tension loadings. Appl Compos Mater 26:139–157. https://doi.org/10.1007/s10443-018-9686-0CrossRef

21.

John MJ, Tlili R, Anandjiwala RD, Boudenne A, Ibos L (2012) Effect of amphiphilic coupling agent on heat flow and dielectric properties of flax–polypropylene composites. Compos Part Eng 43:526–532. https://doi.org/10.1016/j.compositesb.2011.11.016CrossRef

22.

Shakuntala O, Raghavendra G, Samir Kumar A (2014) Effect of filler loading on mechanical and tribological properties of wood apple shell reinforced epoxy composite. Adv Mater Sci Eng 2014:1–9. https://doi.org/10.1155/2014/538651CrossRef

23.

Melkamu A, Kahsay MB, Tesfay AG (2018) Mechanical and water-absorption properties of sisal fiber (Agave sisalana)—reinforced polyester composite. J Nat Fibers 1–9. https://doi.org/10.1080/15440478.2018.1441088

24.

Naveen J, Jawaid M, Vasanthanathan A, Chandrasekar M ((2019)) Finite element analysis of natural fiber-reinforced polymer composites. In: Modelling of damage processes in biocomposites, fibre-reinforced composites and hybrid composites, pp 153–170. Elsevier

25.

Ogierman W, Grzegorzek W (2019) The influence of the WC-Co composite microstructure model on stress field heterogeneity at the microstructure level: FEM based study. Sci Eng Compos Mater 26:134–146. https://doi.org/10.1515/secm-2017-0421CrossRef

26.

Shah AR, Prabhakar MN, Wang H, Song J-I (2018) The influence of particle size and surface treatment of filler on the properties of oyster shell powder filled polypropylene composites. Polym Compos 39:2420–2430. https://doi.org/10.1002/pc.24225

27.

Balać I, Čolić K, Milovančević M, Uskoković P, Zrilić M (2012) Modeling of the matrix porosity influence on the elastic properties of particulate biocomposites. FME Trans 40:81–86

28.

Barczewski M, Sałasińska K, Szulc J (2019) Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: a study into mechanical behavior related to structural and rheological properties. Polym Test 75:1–11. https://doi.org/10.1016/j.polymertesting.2019.01.017CrossRef

29.

Vishnu Vardhini KJ, Murugan R, Tamil Selvi CSR Optimisation of alkali treatment of banana fibres on lignin removal. Indian J Fibre Text Res 41:156–160

30.

Shinoj S, Visvanathan R, Panigrahi S (2010) Towards industrial utilization of oil palm fibre: physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources. Biosyst Eng 106:378–388. https://doi.org/10.1016/j.biosystemseng.2010.04.008CrossRef

31.

Raju GU, Kumarappa S (2011) Experimental study on mechanical properties of groundnut shell particle-reinforced epoxy composites. J Reinforced Plastics Compos 30:1029–1037. https://doi.org/10.1177/0731684411410761CrossRef

32.

Nabinejad O, Sujan D, Rahman ME, Davies IJ (2015) Effect of oil palm shell powder on the mechanical performance and thermal stability of polyester composites. Mater Des 1980–2015(65):823–830. https://doi.org/10.1016/j.matdes.2014.09.080CrossRef

33.

Kim H-S, Yang H-S, Kim H-J (2005) Biodegradability and mechanical properties of agro-flour-filled polybutylene succinate biocomposites. J Appl Polym Sci 97:1513–1521. https://doi.org/10.1002/app.21905CrossRef

Titel: A Combined Experimental/Finite Element Model Analysis on Compressive Behavior of Tamarind Pod Shell Filler Reinforced Composites
verfasst von: Santosha Goudar
Ravi Kant Jain
Debashis Das
Verlag: Springer Singapore
Buch: Machines, Mechanism and Robotics
Print ISBN: 978-981-16-0549-9

Electronic ISBN: 978-981-16-0550-5

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-981-16-0550-5_24

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht