2012 | OriginalPaper | Buchkapitel
A Comparative Study of Oxidation and Hot Corrosion of Electron Beam Welded Low Alloy Steel and Stainless Steel in Different Corrosive Environments
verfasst von : N. Arivazhagan, K. Devendranath Ramkumar, S. Karthikeyan, M. Manikandan, S. Narayanan, S. Surendra
Erschienen in: Trends in Intelligent Robotics, Automation, and Manufacturing
Verlag: Springer Berlin Heidelberg
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
This paper reports on the performance of Electron Beam Welded (EBW) low alloy steel AISI 4140 and stainless steel AISI 304 in air as well as molten salt environments of Na
2
SO
4
-60%V
2
O
5
and K
2
SO
4
-60% NaCl at 650(C. The corrosion kinetics has been established by thermo-gravimetric technique during the initial stages. In this work, X-ray diffraction, scanning electron microscopy/energy-dispersive analysis and electron probe micro analysis techniques were used to analyze the corrosion products. It is well observed from the experimental results that the weldments suffered accelerated corrosion in K
2
SO
4
-NaClenvironment and showed spalling/sputtering of the oxide scale. Furthermore, corrosion resistance of weld interface was found to be lower than that of parent metals in molten salt environment. It is also inferred from the results that NaCl is the one of the main corrosive species in hot corrosion, involving mixtures of K
2
SO
4
-NaCl and which is responsible for internal corrosion attack.