Skip to main content

2021 | OriginalPaper | Buchkapitel

A Complete Study on Various Area Filling Strategies Used in Weld Deposition-Based Additive Manufacturing

verfasst von : Kishore Kumar Panchagnula, Jayaprakash Sharma Panchagnula

Erschienen in: Advances in Materials and Mechanical Engineering

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Achieving the optimal toolpath as well as obtaining the desired physical and geometrical properties for bulk metallic parts through weld deposition-based additive manufacturing (AM) is a challenging task. The current work aims in identifying the suitable toolpath for bulk weld deposition-based AM applications by comparing the various toolpath (eleven types) techniques. These toolpaths were evaluated based on the final layer thickness attained after face milling (skinning) operation, minimum amount material machined during the face milling, average hardness achieved, length of the heat-affected zone (HAZ) and the microstructural behaviour. Amongst the various toolpath patterns considered, hybrid toolpath (Single Contour Out with Hilbert In) is ideal for bulk deposition-based AM owing to its maximum final layer thickness and the minimum amount of material removed in skinning operation. On the other hand, it has been observed that Spiral Out to In toolpath pattern is inferior for bulk deposition-based AM. Additionally, the average grain size is presented for some of the toolpath patterns in the current article.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Song Y-A, Park S (2006) Experimental investigations into rapid prototyping of composites by novel hybrid deposition process. J Mater Process Technol 171(1):35–40CrossRef Song Y-A, Park S (2006) Experimental investigations into rapid prototyping of composites by novel hybrid deposition process. J Mater Process Technol 171(1):35–40CrossRef
2.
Zurück zum Zitat Simhambhatla S, Karunakaran KP (2015) Build strategies for rapid manufacturing of components of varying complexity. Rapid Prototyp J 21(3):340–350 Simhambhatla S, Karunakaran KP (2015) Build strategies for rapid manufacturing of components of varying complexity. Rapid Prototyp J 21(3):340–350
3.
Zurück zum Zitat Karunakaran KP, Suryakumar S, Pushpa V, Akula S (2010) Low cost integration of additive and subtractive processes for hybrid layered manufacturing. Robot Comput-Integr Manuf 26(5):490–499CrossRef Karunakaran KP, Suryakumar S, Pushpa V, Akula S (2010) Low cost integration of additive and subtractive processes for hybrid layered manufacturing. Robot Comput-Integr Manuf 26(5):490–499CrossRef
4.
Zurück zum Zitat Panchagnula JS, Simhambhatla S (2016) Inclined slicing and weld-deposition for additive manufacturing of metallic objects with large overhangs using higher order kinematics. Virtual Phys Prototyp 11(2):99–108CrossRef Panchagnula JS, Simhambhatla S (2016) Inclined slicing and weld-deposition for additive manufacturing of metallic objects with large overhangs using higher order kinematics. Virtual Phys Prototyp 11(2):99–108CrossRef
5.
Zurück zum Zitat Kazanas P, Deherkar P, Almeida P, Lockett H, Williams S (2012) Fabrication of geometrical features using wire and arc additive manufacture. Proc Inst Mech Eng Part B J Eng Manuf 0954405412437126 Kazanas P, Deherkar P, Almeida P, Lockett H, Williams S (2012) Fabrication of geometrical features using wire and arc additive manufacture. Proc Inst Mech Eng Part B J Eng Manuf 0954405412437126
6.
Zurück zum Zitat Aiyiti W, Zhao W, Bingheng Lu, Tang Y (2006) Investigation of the overlapping parameters of MPAW-based rapid prototypingnull. Rapid Prototyp J 12(3):165–172CrossRef Aiyiti W, Zhao W, Bingheng Lu, Tang Y (2006) Investigation of the overlapping parameters of MPAW-based rapid prototypingnull. Rapid Prototyp J 12(3):165–172CrossRef
7.
Zurück zum Zitat Ding D, Pan Z, Cuiuri D, Li H (2015) A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM). Robot Comput-Integr Manuf 31:101–110CrossRef Ding D, Pan Z, Cuiuri D, Li H (2015) A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM). Robot Comput-Integr Manuf 31:101–110CrossRef
8.
Zurück zum Zitat Suryakumar S, Karunakaran KP, Bernard A, Chandrasekhar U, Raghavender N, Sharma D (2011) Weld bead modeling and process optimization in hybrid layered manufacturing. Comput-Aided Des 43(4):331–344 Suryakumar S, Karunakaran KP, Bernard A, Chandrasekhar U, Raghavender N, Sharma D (2011) Weld bead modeling and process optimization in hybrid layered manufacturing. Comput-Aided Des 43(4):331–344
9.
Zurück zum Zitat Persson H (1978) NC machining of arbitrarily shaped pockets. Comput-Aided Des 10(3):169–174 Persson H (1978) NC machining of arbitrarily shaped pockets. Comput-Aided Des 10(3):169–174
10.
Zurück zum Zitat Romero-Carrillo P, Torres-Jimenez E, Dorado R, Díaz-Garrido F (2015) Analytic construction and analysis of spiral pocketing via linear morphing. Comput-Aided Des 69:1–10 Romero-Carrillo P, Torres-Jimenez E, Dorado R, Díaz-Garrido F (2015) Analytic construction and analysis of spiral pocketing via linear morphing. Comput-Aided Des 69:1–10
11.
Zurück zum Zitat Park SC, Choi BK (2000) Tool-path planning for direction-parallel area milling. Comput-Aided Des 32(1):17–25 Park SC, Choi BK (2000) Tool-path planning for direction-parallel area milling. Comput-Aided Des 32(1):17–25
12.
Zurück zum Zitat Thijs L, Verhaeghe F, Craeghs T, Kruth JP (2010) A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Mater 58(9):3303–3312CrossRef Thijs L, Verhaeghe F, Craeghs T, Kruth JP (2010) A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Mater 58(9):3303–3312CrossRef
13.
Zurück zum Zitat Hejripour F, Binesh F, Hebel M, Aidun DK (2019) Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel. J Mater Process Technol 272:58–71CrossRef Hejripour F, Binesh F, Hebel M, Aidun DK (2019) Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel. J Mater Process Technol 272:58–71CrossRef
14.
Zurück zum Zitat Stützer J, Totzauer T, Wittig B, Zinke M, Jüttner S (2019) GMAW cold wire technology for adjusting the ferrite–austenite ratio of wire and arc additive manufactured duplex stainless steel components. Metals 9 Stützer J, Totzauer T, Wittig B, Zinke M, Jüttner S (2019) GMAW cold wire technology for adjusting the ferrite–austenite ratio of wire and arc additive manufactured duplex stainless steel components. Metals 9
15.
Zurück zum Zitat Zhang XY, Wang KH, Zhou Q, Ding JL, Ganguly S, Marzio G, Yang DQ, Xu XF, Dirisu P, Williams SW (2019) Microstructure and mechanical properties of TOPTIG-wire and arc additive manufactured super duplex stainless steel (ER2594). Mater Sci Eng A 762 Zhang XY, Wang KH, Zhou Q, Ding JL, Ganguly S, Marzio G, Yang DQ, Xu XF, Dirisu P, Williams SW (2019) Microstructure and mechanical properties of TOPTIG-wire and arc additive manufactured super duplex stainless steel (ER2594). Mater Sci Eng A 762
Metadaten
Titel
A Complete Study on Various Area Filling Strategies Used in Weld Deposition-Based Additive Manufacturing
verfasst von
Kishore Kumar Panchagnula
Jayaprakash Sharma Panchagnula
Copyright-Jahr
2021
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-16-0673-1_22

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.