nach oben

Electrical Engineering

Erschienen in:

02.06.2022 | Original Paper

A composite electrochemical-thermal model for the determination of thermal profiles of lithium-ion cell for electric vehicle application

verfasst von: Jeemut Bahan Sangiri, Arghya Sardar, Sudipto Ghosh, Suman Maiti, Chandan Chakraborty

Erschienen in: Electrical Engineering | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present work is to describe the electrochemical-thermal profiles of a Li-ion cell of a battery pack for an electric vehicle application considering a realistic drive-cycle. For this investigation, a tropical country like India is considered. The atmospheric temperature varies at different locations of India, and hence, a range of temperatures (25–55°C) is taken into consideration for the study. An electrochemical-thermal model featuring physics laws has been considered as it can provide all the electrochemical kinetics and side reactions to get more accurate results. The two-way coupled electrochemical-thermal model consisting of a 1-dimensional electrochemical model for heat generation and a 2D thermal model to show temperature distribution over the cell is developed. Thermal contact resistance is modeled which is formed in between the battery electrode coatings and current collectors due to imperfect contact at the time of electrode fabrication. This model is first tested with standard charge–discharge profiles at different C-rates, and thereafter, it is validated with the experimental results. Finally, the model is tested with a standard drive-cycle called modified Indian driving cycle, and the results are analyzed. Comments are made on the state of charge (SoC) of Li-ion cell as well as SoC of electrodes. The temperature profiles of the cell show a range of ambient temperatures, and results are reported.

Nächster Artikel A new deep learning method for the classification of power quality disturbances in hybrid power system

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Ramadesigan V, Northrop PWC, De S, Santhanagopalan S, Braatz RD, Subramanian VR (2012) Modeling and simulation of lithium-ion batteries from a systems engineering perspective. J Electrochem Soc 159(3):R31. https://doi.org/10.1149/2.018203jesCrossRef

Lu L, Han X, Li J, Hua J, Ouyang M (2013) A review on the key issues for lithium-ion battery management in electric vehicles. J Power Sources 226:272–288. https://doi.org/10.1016/j.jpowsour.2012.10.060CrossRef

Smith K, Wang C (2006) Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles. J Power Sources 160:662–673. https://doi.org/10.1016/j.jpowsour.2006.01.038CrossRef

Jaguemont J, Boulon L, Dube Y (2016) A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures. J Appied Energy 2016(164):99–114CrossRef

Etesamia SR, Narayan WS, Poor MHV (2020) Smart routing of electric vehicles for load balancing in smart grids. Automatica 120:109–148. https://doi.org/10.1016/j.automatica.2020.109148MathSciNetCrossRef

Manzetti S, Mariasiu F (2015) Electric vehicle battery technologies: from present state to future systems. Renew Sustain Energy Rev 51:1004–1012. https://doi.org/10.1016/j.rser.2015.07.010CrossRef

Wu B, Li Z, Zhang J (2015) Thermal design for the pouch-type large-format lithium-ion batteries, thermo-electrical modeling and origins of temperature non-uniformity. J Electrochem Soc 162(1):A181–A191CrossRef

Ye Y, Shi Y, Cai N, Lee J, He X (2019) Electro-thermal modeling and experimental validation for lithium ion battery. J Power Sources 199:227–238. https://doi.org/10.1016/j.jpowsour.2011.10.027CrossRef

Hosseinzadeh E, Marco J, Jennings P (2019) Combined electrical and electrochemical-thermal model of parallel connected large format pouch cells. J. Energy Storage 22:194–207. https://doi.org/10.1016/j.est.2019.02.004CrossRef

10.

Goutam S, Nikolian A, Jaguemont J, Smekens J, Omar N, Bossche PVD, Mierlo JV (2017) Three-dimensional electro-thermal model of li-ion pouch cell: Analysis and comparison of cell design factors and model assumptions. Appl. Therm. Engg. 126:796–808. https://doi.org/10.1016/j.applthermaleng.2017.07.206CrossRef

11.

Hosseinzadeh E, Genieser R, Worwood D, Barai A, Marco J, Jennings P (2018) A systematic approach for electrochemical-thermal modelling of a large format lithium-ion battery for electric vehicle application. J Power Sources 382:77–94. https://doi.org/10.1016/j.jpowsour.2018.02.027CrossRef

12.

Yazdanpour M, Taheri P, Mansouri A, Bahrami M (2014) A distributed analytical electro-thermal model for pouch-type lithium-ion batteries. J Electrochem Soc 161:A1953. https://doi.org/10.1149/2.1191412jesCrossRef

13.

Newman J, Thomas KE, Hafezi H, Wheeler DR (2003) Modeling of lithium-ion batteries. J Power Sources 119:838–843. https://doi.org/10.1016/S0378-7753(03)00282-9CrossRef

14.

Fu R, Choe SY, Agubra V, Fergus J (2014) Modeling of degradation effects considering side reactions for a pouch type Li-ion polymer battery with carbon anode. J Power Sources 261:120–135CrossRef

15.

Behrou R, Maute K (2017) Numerical modeling of damage evolution phenomenon in solid-state lithium-ion batteries. J Electrochem Soc 164(12):A2573–A2589. https://doi.org/10.1149/2.1101712jesCrossRef

16.

Long HY, Zhu CY, Huang BB, Piao CH, Sun YQ (2019) Model parameters online identification and SOC joint estimation for lithium-ion battery based on a composite algorithm. J Electr Eng & Technol 14:1485–1493CrossRef

17.

Shaik RB, Kannappan EV (2020) Application of adaptive neuro-fuzzy inference rule-based controller in hybrid electric vehicles. J Electr Eng Technol 15:1937–1945. https://doi.org/10.1007/s42835-020-00459-wCrossRef

18.

Qaisar SM (2020) A proficient li-ion battery state of charge estimation based on event-driven processing. J Electr Eng Technol 15:1871–1877. https://doi.org/10.1007/s42835-020-00458-xCrossRef

19.

He L, Shi W, Xia X, Wu X, Chen H, Yan X (2021) Research on temperature rise characteristics of vehicle motors under bench working condition. J Electr Eng Technol. https://doi.org/10.1007/s42835-021-00853-yCrossRef

20.

Sangiri JB, Ghosh S, Chakraborty C (2016) Electro-thermal modeling of Lithium-ion cell for higher discharge rate applications. In: International conference on 21st century energy needs - materials systems application (ICTFCEN), pp 1–6. https://doi.org/10.1109/ICTFCEN.2016.8052705

21.

Wolff N, Harting N, Heinrich M, Röder F, Krewer U (2018) Nonlinear frequency response analysis on lithium-ion batteries: a model-based assessment. Electrochem Acta 260:614–622CrossRef

22.

Lin C, Tang A, Wang W (2015) A review of SOH estimation methods in lithium-ion batteries for electric vehicle applications. Energy Procedia 75:1920–1925. https://doi.org/10.1016/j.egypro.2015.07.199CrossRef

23.

Kee SC, Yun SS (2021) Energy storage system safety operation plan by preventing overcharge during relaxation time. J Electr Eng Technol 16:1941–1953. https://doi.org/10.1007/s42835-021-00749-xCrossRef

24.

Zhang X, Lu J, Yuan S, Yang J, Zhou X (2017) A novel method for identification of lithium-ion battery equivalent circuit model parameters considering electrochemical properties. J Power Sources 345:21–29CrossRef

25.

Qingsong W, Lihua J, Yan Y, Jinhua S (2018) Progress of enhancing the safety of lithium ion battery from the electrolyte aspect. Nano Energy 55:93–114. https://doi.org/10.1016/j.nanoen.2018.10.035CrossRef

26.

Klein M, Tong S, Park JW (2016) In-plane non-uniform temperature effects on the performance of a large-format lithium-ion pouch cell. Appl Energy 165:639–647. https://doi.org/10.1016/j.apenergy.2015.11.090CrossRef

27.

Cheng KWE, Member S, Divakar BP, Wu H, Ding K, Ho HF (2011) Battery-management system (BMS) and SOC development for electrical vehicles. IEEE Trans Vehicular Technol 60(1):76–88CrossRef

28.

Zou Y, Hu X, Ma H, Li SE (2015) Combined state of charge and state of health estimation over lithium-ion battery cell cycle lifespan for electric vehicles. J Power Sources 273:793–803CrossRef

29.

Li Y, Zhang K, Zheng B, Yang F (2016) Effect of local deformation on the coupling between diffusion and stress in lithium-ion battery. Int J Solids Struct 87:81–89. https://doi.org/10.1016/j.ijsolstr.2016.02.029CrossRef

30.

Yi J, Koo B, Shin CB, Han T, Park S (2017) Modeling the effect of aging on the electrical and thermal behaviors of a lithium-ion battery during constant current charge and discharge cycling. J Comput Chem Eng 99:31–39. https://doi.org/10.1016/j.compchemeng.2017.01.006CrossRef

31.

Yang J, Xia B, Huang W, Fu Y, Mi C (2018) Online state-of-health estimation for lithium-ion batteries using constant-voltage charging current analysis. Appl Energy 212:1589–1600. https://doi.org/10.1016/j.apenergy.2018.01.010CrossRef

32.

Santhanagopalan S, Guo Q, Ramadass P, White RE (2006) Review of models for predicting the cycling performance of lithium ion batteries. J Power Sources 156(2):620–628CrossRef

33.

Basu S, Hariharan KS, Kolake SM, Song T, Sohn DK, Yeo T (2016) Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system. Appl Energy 181:1–13CrossRef

34.

Dickinson EJF, Ekstrom H, Fontes E (2014) COMSOL multiphysics: finite element software for electrochemical analysis. A mini review. Electrochem Commun 40:71–74. https://doi.org/10.1016/j.elecom.2013.12.020CrossRef

35.

Tanim TR, Rahn CD, Wang CY (2015) State of charge estimation of a lithium ion cell based on a temperature dependent and electrolyte enhanced single particle model. Energy, Elsevier 80:731–739CrossRef

36.

Zhang X, Chang X, Shen Y, Xiang Y (2017) Electrochemical-electrical-thermal modeling of a pouch-type lithium ion battery: an application to optimize temperature distribution. J. Energy Storage 11:249–257. https://doi.org/10.1016/j.est.2017.03.008CrossRef

37.

Deng Z, Yang L, Deng H, Cai Y, Li D (2018) Polynomial approximation pseudo-two-dimensional battery model or online application in embedded battery management system. Energy, Elsevier 142:838–850CrossRef

38.

Lipu MSH, Hannan MA, Hussain A, Hoque MM, Ker PJ, Saad MHM, Ayob A (2018) A review of state of health and remaining useful life estimation methods for lithium-ion battery in electric vehicles: challenges and recommendations. J Clean Prod 205:115–133. https://doi.org/10.1016/j.jclepro.2018.09.065CrossRef

39.

Liu H, Wei Z, He W, Zhao J (2017) Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review. Energy Convers Management 150:304–330CrossRef

40.

Jokar A, Rajabloo B, Desilets M, Lacroix M (2016) Review of simplified pseudo-two-dimensional models for lithium-ion batteries. J Power Sources 327:44–55. https://doi.org/10.1016/j.jpowsour.2016.07.036CrossRef

41.

Kong XR, Wetton B, Gopaluni B (2019) Assessment of simplifications to a pseudo-2D electrochemical model of Li-ion batteries. Int Fed Autom Control (IFAC) 52(1):946–951. https://doi.org/10.1016/j.ifacol.2019.06.184CrossRef

42.

Ekstrom H, Lindbergh G (2015) A model for predicting capacity fade due to SEI formation in a commercial graphite/LiFePO₄ cell. J Electrochem Soc 162(6):A1003–A1007. https://doi.org/10.1149/2.0641506jesCrossRef

43.

Gao DW, Emadi A (2007) Modeling and simulation of electric and hybrid vehicles. Proceed IEEE 95:4. https://doi.org/10.1109/JPROC.2006.890127CrossRef

44.

Fiori C, Ahn K, Rakha HA (2016) Power-based electric vehicle energy consumption model: model development and validation. Appl Energy 168:257–268. https://doi.org/10.1016/j.apenergy.2016.01.097CrossRef

45.

Srinivasan V, Wang CY (2002) Analysis of electrochemical and thermal behavior of li-ion cells. J Electrochem Soc 150(1):A98. https://doi.org/10.1149/1.1526512CrossRef

46.

Ghalkhani M, Bahiraei F, Nazri GA, Saif M (2017) Electrochemical-thermal model of pouch-type lithium-ion batteries. Electrochem Acta 247:569–587. https://doi.org/10.1016/j.electacta.2017.06.164CrossRef

47.

Doyle M, Newman J (1996) Comparison of modeling prediction with experimental data from plastic lithium ion cells. J Electrochem Soc 143(6):1890–1903. https://doi.org/10.1149/1.1836921CrossRef

48.

Qiu C, He G, Shi W, Zou M, Liu C (2019) The polarization characteristics of lithium-ion batteries under cyclic charge and discharge. J Solid State Electrochem 23:1887–1902. https://doi.org/10.1007/s10008-019-04282-wCrossRef

49.

Chen M, Bai F, Song W, Lv J, Lin S, Feng Z, Li Y, Ding Y (2017) A multilayer electro-thermal model of pouch battery during normal discharge and internal short circuit process. Appl Therm Eng 120:506–516CrossRef

50.

Song W, Chen M, Bai F, Lin S, Chen Y, Feng Z (2018) Non-uniform effect on the thermal/aging performance of Lithium-ion pouch battery. Appl Therm. Engg. 128:1165–1174. https://doi.org/10.1016/j.applthermaleng.2017.09.090CrossRef

51.

Ye Y, Saw LH, Shi Y, Somasundaram K, Tay AAO (2014) Effect of thermal contact resistances on fast charging of large format lithium ion batteries. Electrochim Acta 134:327–337. https://doi.org/10.1016/j.electacta.2014.04.134CrossRef

52.

Ponnappan R, Ravigururajan TS (2004) Contact thermal resistance of Li-ion cell electrode stack. J Power Sources 129(1):7–13. https://doi.org/10.1016/j.jpowsour.2003.11.006CrossRef

53.

Lubner SD, Kaur S, Fu Y, Battaglia V, Prasher RS (2020) “Identification and characterization of the dominant thermal resistance in lithium-ion batteries using operando omega sensors. J Appl Phys 127:105104. https://doi.org/10.1063/1.5134459CrossRef

54.

Genikomsakis KN, Mitrentsis G (2017) A computationally efficient simulation model for estimating energy consumption of electric vehicles in the context of route planning applications. Trans Res Part D 50:98–118. https://doi.org/10.1016/j.trd.2016.10.014CrossRef

55.

Grandjean T, Barai A, Hosseinzadeh E, Guo Y, McGordon A (2017) Large format lithium ion pouch cell thermal characterization for improved electric vehicle thermal management. J Power Sources 359:215–225. https://doi.org/10.1016/j.jpowsour.2017.05.016CrossRef

Titel: A composite electrochemical-thermal model for the determination of thermal profiles of lithium-ion cell for electric vehicle application
verfasst von: Jeemut Bahan Sangiri
Arghya Sardar
Sudipto Ghosh
Suman Maiti
Chandan Chakraborty
Publikationsdatum: 02.06.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Electrical Engineering / Ausgabe 6/2022
Print ISSN: 0948-7921
Elektronische ISSN: 1432-0487
DOI: https://doi.org/10.1007/s00202-022-01575-8

Comparison parametric and non-parametric methods in probabilistic load flow studies for power distribution networks

Original Paper

A modified MLDCL inverter with reduced number of DC sources and switches for PV application

Original Paper

Subtransmission overhead lines mechanical monitoring for fast detection of damaging events

Open Access
Original Paper

A novel switched-capacitor and fuzzy logic-based quadratic boost converter with mitigated voltage stress, applicable for DC micro-grid

Original Paper

Modified tri-axial square Helmholtz coil for omnidirectional wireless power transfer

Original Paper

Reinforcement learning-based demand-side management by smart charging of electric vehicles

Original Paper

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Comparison parametric and non-parametric methods in probabilistic load flow studies for power distribution networks

A modified MLDCL inverter with reduced number of DC sources and switches for PV application

Subtransmission overhead lines mechanical monitoring for fast detection of damaging events

A novel switched-capacitor and fuzzy logic-based quadratic boost converter with mitigated voltage stress, applicable for DC micro-grid

Modified tri-axial square Helmholtz coil for omnidirectional wireless power transfer

Reinforcement learning-based demand-side management by smart charging of electric vehicles