nach oben

European Journal of Wood and Wood Products

Erschienen in:

16.11.2020 | Original Article

A comprehensive overview of bamboo scrimber and its new development in China

verfasst von: Jipeng Chen, Mario Guagliano, Minghong Shi, Xuesong Jiang, Hongping Zhou

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Bamboo scrimber, a bio-material which is made of bamboo, has been considered as a substitute material in place of wood in China under the situation of increasing contradiction between supply and demand of wood resources. In the last decades, the fabrication technology of bamboo scrimber has been improved, which promotes the applications of this material. Especially in China where the bamboo scrimber was developed originally, blowout-like growth has emerged in related research in the recent 3–5 years. It is urgent to summarize the relevant research and present it to more people who are concerned with the aspects of bamboo scrimber as a bio-material. This paper presents a comprehensive introduction to bamboo scrimber including fabrication, properties, heat treatment, anti-mildew and anti-fungi, surface coating, machining, applications, etc. based on a review of literature from Chinese National Knowledge Infrastructure (CNKI) and Web of Science. This work not only establishes fabrication parameters, surface proof technologies and application samples for the industry practice but also summarizes detailed inspection standards, mechanical and thermal properties regarding bamboo scrimber for the reference of scientific research.

Vorheriger Artikel Geopolymer as a multifunctional mineral binder to produce laminated veneer lumber: effect of various aluminosilicate powder types on panels and geopolymer binder features

Nächster Artikel Compression impact behaviour of agglomerated cork at intermediate strain rates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bakar ES, Nazip MNM, Anokye R, Hua LS (2019) Comparison of three processing methods for laminated bamboo timber production. J For Res 30:1–7

Canavan S, Richardson D et al (2015) Understanding the risks of an emerging global market for cultivating bamboo: considerations for a more responsible dissemination of alien bamboos. The World Bamboo Organization, Damyang

Chand N, Jain D, Nigrawal A (2006) Investigation on gradient dielectric characteristics of bamboo. J Appl Polym Sci 102:380–386

Chang XM, Wei J, Guan MJ (2013) Bending performance of carbonized bamboo scrimber and fracture morphology analysis after different ageing treatments. Advanced materials research, vol 744. Trans Tech Publ, Zurich, pp 362–365

Cheng D, Jiang S, Zhang Q (2013) Mould resistance of moso bamboo treated by two step heat treatment with different aqueous solutions. Eur J Wood Prod 71:143–145

Chung MJ, Wang SY (2017) Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms (Phyllostachys makinoi and Phyllostachys pubescens). J Wood Sci 63:473–482

Chung MJ, Wang SY (2018a) Effects of peeling and steam-heating treatment on mechanical properties and dimensional stability of oriented Phyllostachys makinoi and Phyllostachys pubescens scrimber boards. J Wood Sci 64:625–634

Chung M-J, Wang S-Y (2018) Mechanical properties of oriented bamboo scrimber boards made of Phyllostachys pubescens (moso bamboo) from Taiwan and china as a function of density. Holzforschung 72:151–158

Cui Z, Xu M, Chen Z, Xiang J (2018) Experimental study on thermal performance of bamboo scrimber at elevated temperatures. Constr Build Mater 182:178–187

Deng J, Li H, Wang G, Chen F, Zhang W (2015) Effect of removing extent of bamboo green on physical and mechanical properties of laminated bamboo-bundle veneer lumber (BLVL). Eur J Wood Prod 73:499–506

Dixon P, Semple K, Kutnar A, Kamke F, Smith G, Gibson L (2016) Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified moso bamboo. Eur J Wood Prod 74:633–642

Du CG, Song JG, Chen YX (2014) The effect of applying methods of fire retardant on physical and mechanical properties of bamboo scrimber. Advanced materials research, vol 1048. Trans Tech Publ, Zurich, pp 465–468

Du C, Wei J, Jin C (2016) Fire retardant treatment process of bamboo scrimber. J For Eng 1:51–54 (in Chinese)

Fang C-H, Jiang Z-H, Sun Z-J, Liu H-R, Zhang X-B, Zhang R, Fei B-H (2018) An overview on bamboo culm flattening. Constr Build Mater 171:65–74

Fu B, Li X, Yuan G, Chen W, Pan Y (2014) Preparation and flame retardant and smoke suppression properties of bamboo-wood hybrid scrimber filled with calcium and magnesium nanoparticles. J Nanomater 2014:3

Guan M, Cai z, Zhu Y, Lin J (2012) Performance evaluation of bamboo scrimber under planner machining. Key Eng Mater 517:101–106

Han G, Lei Y, Wu Q, Kojima Y, Suzuki S (2008) Bamboo-fiber filled high density polyethylene composites: effect of coupling treatment and nanoclay. J Polym Environ 16:123–130

Hlavacova I, Geryk V (2017) Abrasives for water-jet cutting of high-strength and thick hard materials. Int J Adv Manuf Technol 90:1217–1224

Hu N, Li X, Yiqiang W, Xin-gong L, Peng W (2011) Preliminary study on the production technology of the reconsolidated bamboo and reconsolidated bamboo-wood composite panels for outdoor use. For Mach Equip 39:17–21 (in Chinese)

Huang J, Young W (2019) The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites. Compos B Eng 166:272–283

Huang D, Zhou A, Bian Y (2013) Experimental and analytical study on the nonlinear bending of parallel strand bamboo beams. Constr Build Mater 44:585–592

Huang Z, Sun Y, Musso F (2017) Assessment on bamboo scrimber as a substitute for timber in building envelope in tropical and humid subtropical climate zones-part 1 hygrothermal properties test. In: Materials science and engineering conference series, vol 264, p 012006

Huang X, Xie J, Qi J, Cornelis F, Xiao H, Chen Y, Li F (2018) Differences in physical-mechanical properties of bamboo scrimbers with response to bamboo maturing process. Eur J Wood Prod 76:1137–1143

Huang Y, Ji Y, Yu W (2019a) Development of bamboo scrimber: a literature review. J Wood Sci 65:25

Huang Y, Qi Y, Zhang Y, Yu W (2019b) Progress of bamboo recombination technology in china. Adv Polym Technol 2019:1–10

Huang Y, Zhang Y, Qi Y, Yu Y, Yu W (2019c) Identification of odorous constituents of bamboo during thermal treatment. Constr Build Mater 203:104–110

Jin SY, Zhang J, Cheng F, Luo B, Li LI, Vniversity BF (2017) Effects of sanding parameters on surface roughness in sanding recombinant bamboo. Wood Process Mach 28:33–38 (in Chinese)

Kumar A, Vlach T, Laiblova L, Hrouda M, Kasal B, Tywoniak J, Hajek P (2016) Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties. Constr Build Mater 127:815–827

Kumar A, Ryparovà P, Kasal B, Adamopoulos S, Hajek P (2018) Resistance of bamboo scrimber against white-rot and brown-rot fungi. Wood Mater Sci Eng 15:1–7

Li Q, Wang K, Hua X (2001) Preliminary study on production technology of recombinant bamboo. Chin Wood Based Panels 2001:6–9 (in Chinese)

Li Q, Wang K, Yang W (2003) Research on technology of remaking bamboo glued board. J Bamboo Res 22:56–60 (in Chinese)

Li Q, Yang M, Chen L, Zhang H (2011) Effect of technological parameter on performance of recombined bamboo materials. J Fujian Coll For 31:189–192 (in Chinese)

Li Q, Yu W, Yu Y (2012) Research on properties of reconstituted bamboo lumber made by thermo-treated bamboo bundle curtains. For Prod J 62:545–550 (in Chinese)

Li Z, Jiang Z, Fei B, Cai Z, Pan X (2014) Comparison of bamboo green, timber and yellow in sulfite, sulfuric acid and sodium hydroxide pretreatments for enzymatic saccharification. Bioresour Technol 151:91–99PubMed

Li R, Ekevad M, Guo X, Ding J, Cao P (2015) Effect of pressure, feed rate, and abrasive mass flow rate on water jet cutting efficiency when cutting recombinant bamboo. BioResources 10:499–509

Li J, Wu Z, He S, Huang C (2016a) Effect of bundle diameter on water absorption properties of bamboo scrimber. Zhejiang For Sci Technol 36:67–70 (in Chinese)

Li R, Guo X, Cao P, OuYang J, Teng Y, Wang XA (2016b) Optimization of laser cutting parameters for recombinant bamboo based on response surface methodology. Wood Res 61:275–286

Li X, Zhong Y, Ren H, Xiao G (2016c) Study on mechanical properties of recombinant bamboo produced by moso bamboo. Wood Process Mach 28–32 (in Chinese)

Li J, Chen Y, Xu J, Ren D, Yu H, Guo F, Wu Z (2018a) The influence of media treatments on color changes, dimensional stability, and cracking behavior of bamboo scrimber. Int J Polym Sci 2018:1–7

Li Y, Hu S, Lv J, Zhang A (2018b) Production technology of outdoor reconstituted bamboo. China Wood Based Panels 9–13 (in Chinese)

Li N, Bao M, Rao F, Shu Y, Huang C, Huang Z, Chen Y, Bao Y, Guo R, Xiu C (2019) Improvement of surface photostability of bamboo scrimber by application of organic UV absorber coatings. J Wood Sci 65:7

Liu D, Song J, Anderson DP, Chang PR, Hua Y (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19:1449–1480

Liu X, Smith GD, Jiang Z, Bock MC, Boeck F, Frith O, Gatóo A, Liu K, Mulligan H, Semple KE et al (2015) Nomenclature for engineered bamboo. BioResources 11:1141–1161

Liu H, Zhou W, Li Y, Bin X (2018) Manufacturing technique of crack-free flattened bamboo tube. China For Prod Ind 45:41–45 (in Chinese)

Lobovikov M, Ball L, Paudel S, Guardia M, Piazza M, Wu J, Ren H, Russo L (2007) World bamboo resources: a thematic study prepared in the framework of the global forest resources assessment 2005. Food and Agriculture Org, Rome, p 18

Malanit P, Barbu MC, Frühwald A (2011) Physical and mechanical properties of oriented strand lumber made from an Asian bamboo (Dendrocalamus asper backer). Eur J Wood Prod 69:27–36

Muhammad A, Rahman MR, Hamdan S, Sanaullah K (2019) Recent developments in bamboo fiber-based composites: a review. Polym Bull 76:2655–2682

Okubo K, Fujii T, Thostenson ET (2009) Multi-scale hybrid biocomposite: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose. Compos A Appl Sci Manuf 40:469–475

Ping LI, Yiqiang WU, Zuo Y (2016) The application of recombinant bamboo in furniture. Mater Rev 30:108–110 (in Chinese)

Qin L, Yu W et al (2009) Status and prospects of reconstituted bamboo lumber. World For Res 22:55–59 (in Chinese)

Reynolds TP, Sharma B, Serrano E, Gustafsson P-J, Ramage MH (2019) Fracture of laminated bamboo and the influence of preservative treatments. Compos Part B Eng 174:107017

Shangguan W (2015) Research on physical and mechanical properties of bamboo. Ph.D. thesis Chinese Academy of Forestry

Shangguan W, Zhong Y, Xing X, Zhao R, Ren H (2014) 2d model of strength parameters for bamboo scrimber. BioResources 9:7073–7085

Shangguan W, Zhong Y, Xing X, Zhao R, Ren H (2015) Strength models of bamboo scrimber for compressive properties. J Wood Sci 61:120–127

Shao Z, Fang C, Huang S, Tian G (2010) Tensile properties of moso bamboo (Phyllostachys pubescens) and its components with respect to its fiber-reinforced composite structure. Wood Sci Technol 44:655–666

Sharma B, Gatoo A, Bock M, Mulligan H, Ramage M (2014) Engineered bamboo: state of the art. Proc Inst Civ Eng Constr Mater 168:57–67

Sharma B, Gatóo A, Bock M, Ramage M (2015) Engineered bamboo for structural applications. Constr Build Mater 81:66–73

Sun E, Sun F (2012) Application technology of recombinant material prepared by processed remainder of bamboo strip. Biomass Chem Eng 46:11–16

Verma C, Chariar V (2012) Development of layered laminate bamboo composite and their mechanical properties. Compos B Eng 43:1063–1069

Wang J (1989) Bamboo scrimber: novel technology and novel product. China Wood Ind 3:54–55 (in Chinese)

Wang S (1990) Preliminary study on bamboo scrimber. Build Particleboard 2:22–27 (in Chinese)

Wang S (1991) A study on the manufacturing process of reconsolidated bamboo. China Wood Ind 2:14–18 (in Chinese)

Wang Z (2012) An investigation on water jet machining for hardwood floors. Eur J Wood Prod 70:55–59

Wang X, Chen H (2018) research status and development trend of recombinant bamboo. Build Technol Dev 392:9–10 (in Chinese)

Wang C, Cui L, Liu H, Zhang J, Zhang C (2013) Study on cold press technology for reconsolidated bamboo. For Mach Woodwork Equip 41:17–19 (in Chinese)

Wang J, Cao P, Guo X, Hong X, Jia G, Wang B (2015) Effect of process parameters on cutting forces and surface roughness during peripheral up milling of bamboo scrimber. BioResources 10:8414–8425

Wang W, Huang D, Wu Z, Yongqun X (2018) Thickness swelling of bamboo scrimber improved by Si–Al sol–gel. J Fujian Agric For Univ (Nat Sci Ed) 47:379–384 (in Chinese)

Wei Y, Zhang Q-S, Jiang S-X (2011) Basic properties and prospects of modern bamboo engineering materials applied in building structures. Archit Technol 420:250 (in Chinese)

Wei Y, Ji X, Duan M, Li G (2017) Flexural performance of bamboo scrimber beams strengthened with fiber-reinforced polymer. Constr Build Mater 142:66–82

Wiglusz R, Sitko E, Nikel G, Jarnuszkiewicz I, Igielska B (2002) The effect of temperature on the emission of formaldehyde and volatile organic compounds (VOCS) from laminate flooring–case study. Build Environ 37:41–44

Wu Z, Chen Y, He S, Li J (2017) Comparative study on waterproof of coated bamboo scrimber. J Cent South Univ For Technol 37:87–91

Wu G, Zhong Y, Gong Y, Ren H (2018) Mode ii fracture toughness of bamboo scrimber with compact shear specimen. BioResources 13:477–486

Wu Z, Huang D, Wei W, Wang W, Wang XA, Wei Q, Niu M, Lin M, Rao J, Xie Y (2019) Mesoporous aluminosilicate improves mildew resistance of bamboo scrimber with Cu–B–P anti-mildew agents. J Clean Prod 209:273–282

Xiang J (2016) Experimental research on properties on parallel strand bamboo at high temperature. Master’s thesis Southeast University

Xiao Z, Zhang S, Shu B (2013) Application of carbonized glued laminated bamboo in bamboo structure construction. China For Prod Ind 40:44–46 (in Chinese)

Xu G, Wang L, Liu J, Hu S (2013) Decay resistance and thermal stability of bamboo preservatives prepared using camphor leaf extract. Int Biodeterior Biodegrad 78:103–107

Xu Y, Teng F, Chen H, Ying W (2014) The innovation research on mangle and defibering equipment of bamboo filament with high efficiency for reconstituted bamboo lumber. Wood Process Mach 25:4–14 (in Chinese)

Xu M, Cui Z, Chen Z, Xiang J (2017) Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures. Constr Build Mater 151:732–741

Xu Q, Leng Y, Chen X, Harries KA, Chen L, Wang Z (2018) Experimental study on flexural performance of glued-laminated-timber-bamboo beams. Mater Struct 51:9

Xu J, Liu R, Wu H, Qiu H, Yu Y, Long L, Ni Y (2019) A comparison of the performance of two kinds of waterborne coatings on bamboo and bamboo scrimber. Coatings 9:161

Yang K, Li X, Tang Q, Zheng X (2018) Effects of carbonization treatment on flame retardance and somke suppression of reconstituted bamboo. J Funct Mater 49:03021–03024 (in Chinese)

Yao Y (2018) Current status of bamboo scrimber industry in china. Int Wood Ind 48:58–62 (in Chinese)

Ye L, Jiang Z, Ye J, Meng J (1991) Study on board of reconsolidated bamboo. J Zhejiang For Coll 8:133–140 (in Chinese)

Ye Lm, Ye Yh, Jiang Zh (1996) Studies on the board of reconsolidated bamboo. J Bamboo Res 15:58–65 (in Chinese)

Yin S, Wang L, Wu A, Kabwe E, Chen X, Yan R (2018) Copper recycle from sulfide tailings using combined leaching of ammonia solution and alkaline bacteria. J Clean Prod 189:746–753

Yu W (2011) Development of bamboo-fiber based composites. China Wood Ind 25:6–8 (in Chinese)

Yu W (2012) Current status and future development of bamboo scrimber industry in china. China Wood Ind 26:11–14 (in Chinese)

Yu W, Yu Y (2013) Development and prospect of wood and bamboo scrimber industry in china. China Wood Ind 27:5–8 (in Chinese)

Yu Y, Yu W, Dinghua Z (2006) Studies on factors influencing properties of reconstituted engineering timber made from small-sized bamboo. China For Prod Ind 33:24–28

Yu SL, Wang BJ, Cheng XR (2010) Research on industrial design and CNC of bamboo PSL. Manuf Autom 32:63–66 (in Chinese)

Yu Y, Liu B, Yu W (2014) New technology and new products of bamboo scrimber. Int Wood Ind 8–13 (in Chinese)

Yu Y, Zhu R, Wu B, Hu Y, Yu W (2015) Fabrication, material properties, and application of bamboo scrimber. Wood Sci Technol 49:83–98

Yu Y, Liu R, Huang Y, Meng F, Yu W (2017) Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber. Constr Build Mater 157:1032–1039

Yuzhi XU, Wang B, Shen Y (2016) Laser cutting bamboo veneer and its application in inlay technology. J For Eng 1:161–166

Zhai J, Li Y, Zhang J, Jing T, Architectural FO (2016) Study on flexural behavior of i-section cold-formed thin-walled steel-reconstituted bamboo composite beams. Ind Constr 46:20–25 (in Chinese)

Zhang Q, Jiang S, Tang Y (2002) Industrial utilization on bamboo. In: International Network for Bamboo and Rattan

Zhang J, Ren H, Zhong Y, Zhao R et al (2012) Analysis of compressive and tensile mechanical properties of recombinant bamboo. J Nanjing For Univ (Nat Sci Ed) 36:107–111 (in Chinese)

Zhang YM, Yu YL, Yu WJ (2013) Effect of thermal treatment on the physical and mechanical properties of Phyllostachys pubescen bamboo. Eur J Wood Prod 71:61–67

Zhang J, Yuan S, Fan H, Li Q, Wang H (2016) Effect of different antimildew and antiseptic agents on reconstructed bamboo timber. J Zhejiang For Sci Technol 36:8–12 (in Chinese)

Zhang J, Yuan S, Fan H, Li Q (2017) Influence of different treatment processes on anti-mildew and preservation properties of bamboo scrimber. For Mach Woodwork Equip 45:37–40 (in Chinese)

Zhao P, Zhang X (2019) Size effect of section on ultimate compressive strength parallel to grain of structural bamboo scrimber. Constr Build Mater 200:586–590

Zhao J-B, Meng Z-X, Jin Z, Chen D, Wu Y-S, Zhang W (2019) Bending properties of bamboo scrimber with holes in different sizes and positions. Constr Build Mater 200:209–217

Zheng W, Wang C (2017) Value of reconsolidated bamboo in landscaping. J Chin Urban For 15:50–54 (in Chinese)

Zhong Y, Wu G, Ren H, Jiang Z (2017) Bending properties evaluation of newly designed reinforced bamboo scrimber composite beams. Constr Build Mater 143:61–70

Zhou A, Huang D, Li H, Su Y (2012) Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo. Constr Build Mater 35:191–196

Zhou J, Fenghua Z, Lianghui LU, Wenli Z, Hui FU, Darui XU, Qunfei D, Weiwei L, Dongming S (2018) Experimental research on flexural property of damaged parallel star and bamboo beam reinforced by CFRP. Ind Constr 48:190–194 (in Chinese)

Zhou H, Wang G, Chen L, Yu Z, Smith LM, Chen F (2019) Hydrothermal aging properties of three typical bamboo engineering composites. Materials 12:1450PubMedCentral

Zuo Y, Wu Y, Xiao J (2016) Effect of preparation technology on mechanical properties of reconstituted bamboo. J SW For Univ 32:132–135 (in Chinese)

Zuo Y, Wu Y, Xiao J, Li X (2016b) Hot pressing process of recombinant bamboo based on response surface methodology. J Funct Mater 47:11196–11200 (in Chinese)

Titel: A comprehensive overview of bamboo scrimber and its new development in China
verfasst von: Jipeng Chen
Mario Guagliano
Minghong Shi
Xuesong Jiang
Hongping Zhou
Publikationsdatum: 16.11.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 2/2021
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-020-01622-w

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

A review of the long-term effects of humidity on the mechanical properties of wood and wood-based products

Nondestructive assessment of cross-laminated timber using non-contact transverse vibration and ultrasonic testing

Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels

Viscoelastic properties of thermo-hydro-mechanically treated beech (Fagus sylvatica L.) determined using dynamic mechanical analysis

Geopolymer as a multifunctional mineral binder to produce laminated veneer lumber: effect of various aluminosilicate powder types on panels and geopolymer binder features

Properties relationship evaluation and plasticity analytical model approach for Brazilian tropical species