nach oben

Measurement Techniques

Erschienen in:

05.12.2018 | LINEAR AND ANGULAR MEASUREMENTS

A Method of Direct Monitoring of the Suitability of an Assembled Extended Cylindrical Projectile Body

verfasst von: A. S. Yamnikov, O. A. Yamnikova, I. A. Matveev, E. N. Rodionova

Erschienen in: Measurement Techniques | Ausgabe 9/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A method is proposed for monitoring the suitability of a modular extended cylindrical shell of a rocket projectile. The method is based on direct measurement of the amount of entry during the shell installation process by outer bourrelets into the roller prisms, wherein the line of operation of the measuring device is perpendicular to the sides of the prisms. The proposed method of monitoring is compared with the traditional method, in which the radial runout of the middle bourrelet is measured also when the shell is installed by the outer bourrelets into the roller prisms. It was established that the new monitoring method is more effective in view of its greater objectivity and lesser labor intensity.

Vorheriger Artikel Position-Binary Technology for Processing the Signals of a Load for Identification of the Technical State of Deep-Well Sucker-Rod Pumps

Nächster Artikel Metrological Analysis of an Optoelectronic Monitoring System for Profilograms of Shells of Rotation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. V. Gurov, “9K58 Smerch multiple launch rocket system,” in Multiple Launch Rocket Systems. Review, GNPP Splav, Tula (2010), 2nd electronic ed.

A. A. Red’ko, S. A. Poltorykhin, S. A. Kudryavtsev, and I. L. Kosarev, “The infl uence of technological deviations in the manufacture of PC MLRS on their dispersion during firing,” Boeprip. Vysokoenerg. Kondens. Sist., No. 1, 32–35 (2008).

GOST R 53442-2015 (ISO 1101:2012), Basic Norms of Interchangeability. Geometrical Product Specifications. Geometrical Tolerance. Tolerances of Form, Orientation, Site, and Runout.

GOST 24642-81, Basic Norms of Interchangeability. Tolerances of Form and Arrangement of Surfaces. Basic Terms and Definitions.

O. A. Yamnikova, A. S. Yamnikov, and I. A. Matveev, “Infl uence of the ovality of the base surfaces of thin-walled extended axially symmetric hollow parts on the error of radial runout measurements in prisms,” Izmer. Tekh., No. 3, 32–36 (2018).

A. S. Yamnikov (ed.), Foundations of the Technology of Mechanical Engineering: Textbook, Izd. TulGU, Tula (2006).

V. I. Tregubov, A. S. Yamnikov, and I. A. Matveev, “Technological provision of specified design parameters for parts of the TORNADO-G MLRS engine,” Izv. Ross. Akad. Raket. Artill. Nauk, No. 4 (99), 94–98 (2017).

A. S. Yamnikov, O. A. Yamnikova, I. A. Matveev, and E. N. Rodionova, “Effect of position errors of composite axial-symmetric body joint surfaces on the position error of operating surfaces,” Vestn. Bryansk. Gos. Tekh. Univ., No. 7 (60), 13–17 (2017).

A. S. Yamnikov and I. A. Matveev, “Statistical analysis of accuracy of machining of extended parts from a stamped billet of the glass type,” Izv. TulGU. Tekh. Nauki, No. 9, Pt. 2, 121–126 (2015).

10.

RD 50-635-87, Methodological Instructions. Dimension Chains. Primary Concepts. Methods of Calculating Linear and Angular Chains.

Titel: A Method of Direct Monitoring of the Suitability of an Assembled Extended Cylindrical Projectile Body
verfasst von: A. S. Yamnikov
O. A. Yamnikova
I. A. Matveev
E. N. Rodionova
Publikationsdatum: 05.12.2018
Verlag: Springer US
Erschienen in: Measurement Techniques / Ausgabe 9/2018
Print ISSN: 0543-1972
Elektronische ISSN: 1573-8906
DOI: https://doi.org/10.1007/s11018-018-1520-4

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2018

Pulsed High-Voltage Sensor with Nanosecond Transient Response Rise Time

Linearization of the Static Characteristics of a Radioisotope Density Meter

Level of Verification of Measuring Instruments and a Posteriori Reliability of Control

Microelectronic Gas Resistive Sensor Based on Nanocrystalline Tin Dioxide Films with Terbium and Antimony Additives

Sensitivity of Sonar Receiver When Measuring Underwater Noise

Get 132–2018: State Primary Standard of the Unit of Specific Electrical Conductivity of Liquids in Range from 0.1 TO 50 mho/m