nach oben

International Journal of Computer Assisted Radiology and Surgery

Erschienen in:

10.08.2018 | Original Article

A patient-specific haptic drilling simulator based on virtual reality for dental implant surgery

verfasst von: Xiaojun Chen, Pengjie Sun, Denghong Liao

Erschienen in: International Journal of Computer Assisted Radiology and Surgery | Ausgabe 11/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Purpose

In the dental implant surgery, there are inevitable risks due to the anatomically complex operation in the cranio-maxillofacial region. Therefore, there is a trend to use computer-aided technology to simulate the process of the implant surgery. In this study, we present a haptic simulator for trainees to study and rehearse the drilling performance of dental implant surgery.

Materials and methods

The dental implant surgery simulator (DISS) is developed based on the haptic force-feedback device Omega.6, and some free open-source software libraries such as Computer Haptics and Active Interface (CHAI3D), Qt and Visualization Toolkit. To achieve the desired effects of drilling, the meshes are subdivided with a recursive algorithm which breaks down a triangular patch into 4 sub-triangles. The drilling operation can be implemented at any specified location of the model. Once the drilling direction is determined, the position and rotation of the haptic device tool are constrained to the orientation through a dimension reduction algorithm. The driller diameter and drill speed are tunable to implement stepwise drilling for the patient-specific models.

Results

A patient-specific drilling simulator based on virtual reality for dental implant surgery is presented. The simulation of stepwise drilling was conducted, and three patient-specific models reconstructed by Computed Tomography data were employed to help the novices to find the suitable drilling parameter.

Conclusion

The obtained results showed that the haptic-based DISS could simulate various dental implant surgeries with different driller diameter and drill speed which takes patient-specific models as input. The evaluation of the DISS proves its good performance and it could provide an effective method to improve the skills and experiences of trainees.

Vorheriger Artikel Accuracy of computer-aided design models of the jaws produced using ultra-low MDCT doses and ASIR and MBIR

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Kusumoto N, Sohmura T, Yamada S, Wakabayashi K, Nakamura T, Yatani H (2006) Application of virtual reality force feedback haptic device for oral implant surgery. Clin Oral Implant Res 17:708–713CrossRef

Chen X, Lin Y, Wang C, Wu Y, Wang X, Shen G (2010) An integrated surgical planning and virtual training system using a force feedback haptic device for dental implant surgery. In: 2010 international conference on audio, language and image processing (ICALIP), pp 1257–1261

Verstreken K, Van Cleynenbreugel J, Martens K, Marchal G, van Steenberghe D, Suetens P (1998) An image-guided planning system for endosseous oral implants. IEEE Trans Med Imaging 17:842–852CrossRefPubMed

Zheng GC, Gu LX, Li XB, Zhang JS (2007) Computer-assisted preoperative planning and surgical navigation system in dental implantology. In: 2007 6th international special topic conference on information technology applications in biomedicine, pp 73–76

Sohmura T, Hojo H, Nakajima M, Wakabayashi K, Magao M, Iida S, Kitagawa T, Kogo M, Kojima T, Matsumura K, Nakamura T, Takahashi J (2004) Prototype of simulation of orthognathic surgery using a virtual reality haptic device. Int J Oral Maxillofac Surg 33(8):740–750CrossRefPubMed

Wu F, Chen X, Lin Y, Wang C, Wang X, Shen G, Qin J, Heng PA (2014) A virtual training system for maxillofacial surgery using advanced haptic feedback and immersive workbench. Int J Med Robot + Comput Assist Surg MRCAS 10:78–87CrossRef

Chiarelli T, Franchini F, Lamma A, Lamma E, Sansoni T (2012) From implant planning to surgical execution: an integrated approach for surgery in oral implantology. Int J Med Robot Comput 8:57–66CrossRef

Schendel S, Montgomery K, Sorokin A, Lionetti G (2005) A surgical simulator for planning and performing repair of cleft lips. J Cranio Maxillofac Surg 33:223–228CrossRef

O’Toole RV, Playter RR, Krummel TM, Blank WC, Cornelius NH, Roberts WR, Bell WJ, Raibert M (1999) Measuring and developing suturing technique with a virtual reality surgical simulator. J Am Coll Surg 189:114–127CrossRefPubMed

10.

Zheng F, Feng LuW, San Wong Y, Foong KWC (2013) Graphic processing units (GPUs)-based haptic simulator for dental implant surgery. J Comput Inf Sci Eng 13:041005CrossRef

11.

Tsai MD, Hsieh MS, Tsai CH (2007) Bone drilling haptic interaction for orthopedic surgical simulator. Comput Biol Med 37:1709–1718CrossRefPubMed

12.

Lin YP, Wang XD, Wu FL, Chen XJ, Wang CT, Shen GF (2014) Development and validation of a surgical training simulator with haptic feedback for learning bone-sawing skill. J Biomed Inform 48:122–129CrossRefPubMed

13.

Hayward V, Gregorio P, Astley O, Greenish S, Doyon M, Lessard L, McDougall J, Sinclair I, Boelen S, Chen X, Demers J-G, Poulin J, Benguigui I, Almey N, Makuc B, Zhang X (1998) Freedom-7: a high fidelity seven axis haptic device with application to surgical training. Lecture notes in control and information science, pp 445–456

14.

Ruffaldi E, Morris D, Barbagli F, Salisbury K, Bergamasco M (2008) Voxel-based haptic rendering using implicit sphere trees. IEEE Computer Society, Los AlamitosCrossRef

15.

Wanschitz F, Birkfellner W, Figl M, Patruta S, Wagner A, Watzinger F, Yerit K, Schicho K, Hanel R, Kainberger F, Imhof H, Bergmann H, Ewers R (2002) Computer-enhanced stereoscopic vision in a head-mounted display for oral implant surgery. Clin Oral Implant Res 13:610–616CrossRef

16.

Zilles CB, Salisbury JK (1995) A constraint-based god-object method for haptic display. In: Proceedings 1995 IEEE/RSJ international conference on intelligent robots and systems human robot interaction and cooperative robots (Cat No95CB35836), vol 3. pp 146–151

17.

Wang DX, Zhang Y, Wang Y, Lu P, Wang Y (2003) Development of dental training system with haptic display. In: Ro-Man 2003: 12th IEEE international workshop on robot and human interactive communication, proceedings, pp 159–164

18.

Gregory A, Lin MC, Gottschalk S, Taylor R (2000) Fast and accurate collision detection for haptic interaction using a three degree-of-freedom force-feedback device. Comput Geom Theor Appl 15:69–89CrossRef

19.

Chang CT, Gorissen B, Melchior S (2011) Fast oriented bounding box optimization on the rotation group SO(3, R). Acm Trans Graph 30(5):1–16CrossRef

20.

Sießegger M, Schneider BT, Mischkowski RA, Lazar F, Krug B, Klesper B, Zöller JE (2001) Use of an image-guided navigation system in dental implant surgery in anatomically complex operation sites. J Cranio Maxillo-fac Surg 29:276–281CrossRef

21.

Lin YP, Yu DD, Chen XJ, Wang XD, Shen GF, Wang CT (2014) Simulation and evaluation of a bone sawing procedure for orthognathic surgery based on an experimental force model. J Biomech Eng-T ASME 136:034501CrossRef

22.

Kovler I, Joskowicz L, Weil YA, Khoury A, Kronman A, Mosheiff R, Liebergall M, Salavarrieta J (2015) Haptic computer-assisted patient-specific preoperative planning for orthopedic fractures surgery. Int J Comput Assist Radiol Surg 10:1535–1546CrossRefPubMed

23.

Pettersson J, Palmerius KL, Knutsson H, Wahlstrom O, Tillander B, Borga M (2008) Simulation of patient specific cervical hip fracture surgery with a volume haptic interface. IEEE Trans Biomed Eng 55:1255–1265CrossRefPubMed

24.

Ming-Shium H, Ming-Dar T, Yi-Der Y (2006) An amputation simulator with bone sawing haptic interaction. Biomed Eng Appl Basis Commun 18:229–236CrossRef

25.

Wang Q, Chen H, Wu W, Jin HY, Heng PA (2012) A virtual surgical simulator for mandibular angle reduction based on patient specific data. In: IEEE virtual reality conference 2012 proceedings, pp 85–86

Titel: A patient-specific haptic drilling simulator based on virtual reality for dental implant surgery
verfasst von: Xiaojun Chen
Pengjie Sun
Denghong Liao
Publikationsdatum: 10.08.2018
Verlag: Springer International Publishing
Erschienen in: International Journal of Computer Assisted Radiology and Surgery / Ausgabe 11/2018
Print ISSN: 1861-6410
Elektronische ISSN: 1861-6429
DOI: https://doi.org/10.1007/s11548-018-1845-0

Springer Professional

Abstract

Purpose

Materials and methods

Results

Conclusion

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2018

Accuracy of computer-aided design models of the jaws produced using ultra-low MDCT doses and ASIR and MBIR

Fully automatic segmentation of paraspinal muscles from 3D torso CT images via multi-scale iterative random forest classifications

Real-time microrobot posture recognition via biplane X-ray imaging system for external electromagnetic actuation

AR in VR: assessing surgical augmented reality visualizations in a steerable virtual reality environment

Extraction of open-state mitral valve geometry from CT volumes

Development of a shoulder-mounted robot for MRI-guided needle placement: phantom study