nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

A Review on Utilization of Construction and Demolition Waste (CDW) Toward Green and Circular Economy

verfasst von : Christian Balemba, Brenda Mirenge, Dani Konde, Nabil Hossiney, Srinidhi Lakshmish Kumar, K. Sarath Chandra

Erschienen in: Advances in Geotechnics and Structural Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Globally, policy makers have realized the significance of infrastructure development with respect to safety and environment-friendly approach. This has resulted in reuse and recycling initiatives in various industries including construction and building sector. Further, it is imperative to understand new techniques and methods to improve the effectiveness of recycling, keeping environment and carbon emissions in check. Recently, utilization of construction and demolition waste (CDW) as precursors in synthesizing alkali-activated and geopolymer binders have caught attention of researchers as green building material. This review paper discusses the findings of the latest research and promotes the use of CDW as a potential starting or precursor material in alkali-activated or geopolymer concrete toward green and circular economy. If processed appropriately, CDW can be used to produce environment-friendly binders that can reduce our dependence on conventional binders like Portland cement, thus promoting recycling in sustainable and eco-friendly manner.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Fluid–Structure Idealization in Intze Tank under Seismic Loads

Nächstes Kapitel Experimental Study on the Effects of Nanomaterials in Clayey Soil of Aligarh City of Northern India

Ruiz LAL, Ramon XR, Domingo SG (2020) The circular economy in the construction and demolition waste sector–a review and an integrative model approach. J Clean Prod 248:119238. https://doi.org/10.1016/j.jclepro.2019.119238CrossRef

Baidya R, Ghosh SK (2019) Low carbon cement manufacturing in India by co-processing of alternative fuel and raw materials. Energ Source Part A 41:2561–2572. https://doi.org/10.1080/15567036.2018.1555630CrossRef

Hossiney N, Sepuri HK, Mohan MK, Arjun HR, Govindaraju S, Chyne J (2020) Alkali-activated concrete paver blocks made with recycled asphalt pavement (RAP) aggregates. Case Stud in Constr Mater 12:e0032. https://doi.org/10.1016/j.cscm.2019.e00322CrossRef

Hossiney N, Sepuri HK, Mohan MK, Chandra SK, Kumar SL, Thejas HK (2020) Geopolymer concrete paving blocks made with Recycled Asphalt Pavement (RAP) aggregates towards sustainable urban mobility development. Cogent Eng 7:1824572. https://doi.org/10.1080/23311916.2020.1824572CrossRef

Thejas HK, Hossiney N (2020) Use of waste foundry sand in precast concrete paver blocks—a study with Belgaum foundry industry. In: Kanwar V, Shukla S (eds) Sustainable civil engineering practices. LNCE, vol 72. Springer, Singapore, pp 1–7. https://doi.org/10.1007/978-981-15-3677-9_1

Velumani P, Senthilkumar S (2018) Production of sludge-incorporated paver blocks for efficient waste management. J Air Waste Manag Assoc 68:626–636. https://doi.org/10.1080/10962247.2017.1395373CrossRef

Hossiney N, Das P, Mohan MK, George J (2018) In-plant production of bricks containing waste foundry sand—a study with Belgaum foundry industry. Case Stud Constr Mater 9:e00170. https://doi.org/10.1016/j.cscm.2018.e00170CrossRef

Jose J, Hossiney N (2016) Characteristics of concrete containing waste foundry sand and slag sand. Int J Earth Sci Eng 9:54–59

Poon CS, Kou SC, Wan HW, Etxeberria M (2009) Properties of concrete blocks prepared with low grade recycled aggregates. Waste Manage 29:2369–2377. https://doi.org/10.1016/j.wasman.2009.02.018CrossRef

10.

Poon CS, Chan D (2006) Paving blocks made with recycled concrete aggregate and crushed clay brick. Constr Build Mater 20:569–577. https://doi.org/10.1016/j.conbuildmat.2005.01.044CrossRef

11.

Buchwald A, Kaps C, Hohmann M (2003) Alkali-activated binders and pozzolan cement binders–complete binder reaction or two sides of the same story. In: Proceedings of the 11th international congress on the chemistry of cement (ICCC), Durban, South Africa

12.

Nazari A, Sanjayan JG (2016) Handbook of low carbon concrete. Butterworth- Heinemann

13.

McLellan BC, Williams RP, Lay J, Riessen AV, Corder GD (2011) Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement. J Clean Prod 19:1080–1090. https://doi.org/10.1016/j.jclepro.2011.02.010CrossRef

14.

Waldmann D, Thapa VB (2018) A short review on alkali-activated binders and geopolymer binders. Vielfalt im Massivbau-Festschrift zum 65 Geburtstag von Prof. Dr. Ing. Jürgen Schnell. http://hdl.handle.net/10993/35284

15.

Arulrajah A, Piratheepan J, Disfani MM, Bo MW (2013) Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications. J Mater Civ Eng 25:1077–1088. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000652CrossRef

16.

Zaumanis M, Mallick RB, Frank R (2014) 100% Recycled hot mix asphalt: a review and analysis. Resour Conserv Recycl 92:230–245. https://doi.org/10.1016/j.resconrec.2014.07.007CrossRef

17.

Taha R, Ali G, Basma A, Turk OA (1999) Evaluation of reclaimed asphalt pavement aggregate in road bases and subbases. Transp Res Rec 1652:264–269. https://doi.org/10.3141/1652-33CrossRef

18.

Su Y, Hossiney N, Tia M, Bergin M (2014) Mechanical properties assessment of concrete containing reclaimed asphalt pavement using the superpave indirect tensile strength test. J Test Eval 42:912–920. https://doi.org/10.1520/JTE20130093CrossRef

19.

Tia M, Hossiney N, Su YM, Chen Y, Do TA (2012) Use of reclaimed asphalt pavement in concrete pavement slabs. Florida Department of Transportation, Technical report: 88115

20.

Hossiney N, Tia M, Bergin MJ (2010) Concrete containing RAP for use in concrete pavement. Int J Pavement Res Technol 3:251–258

21.

Su YM, Hossiney N, Tia M (2013) Indirect tensile strength of concrete containing reclaimed asphalt pavement using the superpave indirect tensile test. Adv Mat Res 723:368–375. https://doi.org/10.4028/www.scientific.net/AMR.723.368CrossRef

22.

Su YM, Hossiney N, Tia M (2013) The analysis of air voids in concrete specimen using X-ray computed tomography. Proc. SPIE vol 8694. Nondestructive characterization for composite materials, aerospace engineering, civil infrastructure, and homeland security, 86940S. https://doi.org/10.1117/12.2012267

23.

Reig L, Tashima MM, Borrachero MV, Monzó J, Cheeseman CR, Payá J (2013) Properties and microstructure of alkali-activated red clay brick waste. Constr Build Mater 43:98–106. https://doi.org/10.1016/j.conbuildmat.2013.01.031CrossRef

24.

Allahverdi A, Kani EN (2013) Use of construction and demolition waste (CDW) for alkali-activated or geopolymer cements. In: Handbook of recycled concrete and demolition waste, Woodhead Publishing

25.

Komnitsas K, Zaharaki D, Vlachou A, Bartzas G, Galetakis M (2015) Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers. Adv Powder Technol 26:368–376. https://doi.org/10.1016/j.apt.2014.11.012CrossRef

26.

Rakhimova NR, Rakhimov RZ (2015) Alkali-activated cements and mortars based on blast furnace slag and red clay brick waste. Mater Des 85:324–331. https://doi.org/10.1016/j.matdes.2015.06.182CrossRef

27.

Zaharaki D, Galetakis M, Komnitsas K (2016) Valorization of construction and demolition (C&D) and industrial wastes through alkali activation. Constr Build Mater 121:686–693. https://doi.org/10.1016/j.conbuildmat.2016.06.051CrossRef

28.

Robayo RA, Mulford A, Munera J, de Gutiérrez RM (2016) Alternative cements based on alkali-activated red clay brick waste. Constr Build Mater 128:163–169. https://doi.org/10.1016/j.conbuildmat.2016.10.023CrossRef

29.

Reig L, Sanz MA, Borrachero MV, Monzó J, Soriano L, Payá J (2017) Compressive strength and microstructure of alkali-activated mortars with high ceramic waste content. Ceram Int 43:13622–13634. https://doi.org/10.1016/j.ceramint.2017.07.072CrossRef

30.

Robayo-Salazar RA, Rivera JF, de Gutiérrez RM (2017) Alkali-activated building materials made with recycled construction and demolition wastes. Constr Build Mater 149:130–138. https://doi.org/10.1016/j.conbuildmat.2017.05.122CrossRef

31.

Robayo-Salazar RA, Mejía-Arcila JM, de Gutiérrez RM (2017) Eco-efficient alkali-activated cement based on red clay brick wastes suitable for the manufacturing of building materials. J Clean Prod 166:242–252. https://doi.org/10.1016/j.jclepro.2017.07.243CrossRef

32.

Tuyan M, Andiç-Çakir O, Ramyar K (2018) Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer. Compos B Eng 135:242–252. https://doi.org/10.1016/j.compositesb.2017.10.013CrossRef

33.

Sedira N, Castro-Gomes J, Magrinho M (2018) Red clay brick and tungsten mining waste-based alkali-activated binder: microstructural and mechanical properties. Constr Build Mater 190:1034–1048. https://doi.org/10.1016/j.conbuildmat.2018.09.153CrossRef

34.

Rakhimova NR, Rakhimov RZ (2019) Toward clean cement technologies: a review on alkali-activated fly-ash cements incorporated with supplementary materials. J Non Cryst Solids 509:31–41. https://doi.org/10.1016/j.jnoncrysol.2019.01.025CrossRef

35.

Zhao Y, Gao J, Liu C, Chen X, Xu Z (2020) The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement. J Clean Prod 242:118521. https://doi.org/10.1016/j.jclepro.2019.118521CrossRef

36.

Davidovits J, Davidovits M, Davidovits N (1994) Process for obtaining a geopolymeric alumino-silicate and products thus obtained. US Patent: 5,342,595

37.

Khale D, Chaudhary R (2007) Mechanism of geopolymerization and factors influencing its development: a review. J Mater Sci 42:729–746. https://doi.org/10.1007/s10853-006-0401-4CrossRef

38.

Pacheco-Torgal F, Castro-Gomes J, Jalali S (2008) Alkali-activated binders: a review. Part about materials and binders manufacture. Constr Build Mater 22:1315–1322. https://doi.org/10.1016/j.conbuildmat.2007.03.019

39.

Yahya Z, Abdullah MMAB, Hussin K, Ismail KN, Razak RA, Sandu AV (2015) Effect of solids-to-liquids, Na₂SiO₃-to-NaOH and curing temperature on the palm oil boiler ash (Si + Ca) geopolymerisation system. Materials 8:2227–2242. https://doi.org/10.3390/ma8052227CrossRef

40.

Komnitsas K, Zaharaki D (2007) Geopolymerisation: a review and prospects for the mineral industry. Miner Eng 20:1261–1277CrossRef

41.

Huseien GF, Mirza J, Ismail M, Ghoshal SK, Hussein AA (2017) Geopolymer mortars as sustainable repair material: a comprehensive review. Renew Sust Energ Rev 80:54–74. https://doi.org/10.1016/j.rser.2017.05.076CrossRef

42.

Shoaei P, Musaeei HR, Mirlohi F, Ameri F, Bahrami N (2019) Waste ceramic powder- based geopolymer mortars: Effect of curing temperature and alkaline solution-to-binder ratio. Constr Build Mater 227:116686. https://doi.org/10.1016/j.conbuildmat.2019.116686CrossRef

43.

Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2004) Brief review of development of geopolymer concrete. In: Invited Paper, George Hoff Symposium, American Concrete Institute. Las Vegas, USA

Titel: A Review on Utilization of Construction and Demolition Waste (CDW) Toward Green and Circular Economy
verfasst von: Christian Balemba
Brenda Mirenge
Dani Konde
Nabil Hossiney
Srinidhi Lakshmish Kumar
K. Sarath Chandra
Verlag: Springer Singapore
Buch: Advances in Geotechnics and Structural Engineering
Print ISBN: 978-981-336-968-9

Electronic ISBN: 978-981-336-969-6

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-33-6969-6_20

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"