Skip to main content
Erschienen in: The International Journal of Advanced Manufacturing Technology 9-10/2021

19.04.2021 | ORIGINAL ARTICLE

A rigid-flexible coupling pretravel error model for a touch-trigger probe in an on-machine inspection system

verfasst von: Simi Li, Pingfa Feng, Long Zeng, Shuai Wang, Yamin Li, Shaoqiu Zhang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Touch-trigger probes are widely used in on-machine inspection (OMI) systems, which have become increasingly important in an interprocess inspection. The pretravel errors are often compensated by data-driven calibration. However, its accuracy is significantly affected by its internal mechanical structure and trigger mechanism. In this paper, we propose a rigid-flexible coupling pretravel error model, considering the bending of the stylus and the lifting of the stylus carrier in the triggering process. This paper presents a method to identify the acceleration of machine tool by fitting the measured results at different speeds into quadratic curves and establishes the response error model. The trigger force of 73 direction probes is identified by a three-directional force sensor. The trigger force identified by the experiment is analyzed in the rigid-flexible simulation model, and the trigger resistance threshold of the probe is obtained. The simulation model of trigger error is established. Through the response error model and trigger error simulation model proposed in this paper, the probe pretravel error compensation accuracy can be improved by 39.6%.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Huang N, Yin C, Liang L, Hu J, Wu S (2018) Error compensation for machining of large thin-walled part with sculptured surface based on on-machine measurement. Int J Adv Manuf Technol 96(9–12):4345–4352CrossRef Huang N, Yin C, Liang L, Hu J, Wu S (2018) Error compensation for machining of large thin-walled part with sculptured surface based on on-machine measurement. Int J Adv Manuf Technol 96(9–12):4345–4352CrossRef
2.
Zurück zum Zitat Jiang ZX, Bao S, Zhou XD, Tang XQ, Zheng SQ (2015) Identification of location errors by a touch-trigger probe on five-axis machine tools with a tilting head. Int J Adv Manuf Technol 81(1–4):149–158CrossRef Jiang ZX, Bao S, Zhou XD, Tang XQ, Zheng SQ (2015) Identification of location errors by a touch-trigger probe on five-axis machine tools with a tilting head. Int J Adv Manuf Technol 81(1–4):149–158CrossRef
3.
Zurück zum Zitat Guiassa R, Mayer JRR, St-Jacques P, Engin S (2014) Calibration of the cutting process and compensation of the compliance error by using on-machine probing. Int J Adv Manuf Technol 78(5–8):1043–1051 Guiassa R, Mayer JRR, St-Jacques P, Engin S (2014) Calibration of the cutting process and compensation of the compliance error by using on-machine probing. Int J Adv Manuf Technol 78(5–8):1043–1051
4.
Zurück zum Zitat Huang N, Zhang S, Bi Q, Wang Y (2016) Identification of geometric errors of rotary axes on 5-axis machine tools by on-machine measurement. Int J Adv Manuf Technol 84(1–4):505–512CrossRef Huang N, Zhang S, Bi Q, Wang Y (2016) Identification of geometric errors of rotary axes on 5-axis machine tools by on-machine measurement. Int J Adv Manuf Technol 84(1–4):505–512CrossRef
5.
Zurück zum Zitat Wozniak A, Byszewski M, Jankowski M (2013) Setup for triggering force testing of touch probes for CNC machine tools and CMMs. Meas Sci Rev 13(1):29–33CrossRef Wozniak A, Byszewski M, Jankowski M (2013) Setup for triggering force testing of touch probes for CNC machine tools and CMMs. Meas Sci Rev 13(1):29–33CrossRef
6.
Zurück zum Zitat Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tools Manuf 58:44–53CrossRef Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tools Manuf 58:44–53CrossRef
7.
Zurück zum Zitat Bi Q, Huang N, Sun C, Wang Y, Zhu L, Ding H (2015) Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement. Int J Mach Tools Manuf 89:182–191CrossRef Bi Q, Huang N, Sun C, Wang Y, Zhu L, Ding H (2015) Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement. Int J Mach Tools Manuf 89:182–191CrossRef
8.
Zurück zum Zitat Givi M, Mayer JRR (2014) Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. Int J Mach Tools Manuf 87:89–95CrossRef Givi M, Mayer JRR (2014) Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. Int J Mach Tools Manuf 87:89–95CrossRef
9.
Zurück zum Zitat ISO 230-10:2016, Test code for machine tools -Part 10: determination of the measuring performance of probing systems of numerically controlled machine tools ISO 230-10:2016, Test code for machine tools -Part 10: determination of the measuring performance of probing systems of numerically controlled machine tools
10.
Zurück zum Zitat Estler WT, Phillips SD, Borchardt B, Hopp T, Levenson M, Eberhardt K, McClain M, Shen Y, Zhang X (1997) Practical aspects of touch-trigger probe error compensation. Precis Eng J Am Soc Precis Eng 21(1):1–17 Estler WT, Phillips SD, Borchardt B, Hopp T, Levenson M, Eberhardt K, McClain M, Shen Y, Zhang X (1997) Practical aspects of touch-trigger probe error compensation. Precis Eng J Am Soc Precis Eng 21(1):1–17
11.
Zurück zum Zitat Estler WT, Phillips SD, Borchardt B, Hopp T, Witzgall C, Levenson M, Eberhardt K, McClain M, Shen Y, Zhang X (1996) Error compensation for CMM touch trigger probes. Precis Eng J Am Soc Precis Eng 19(2–3):85–97 Estler WT, Phillips SD, Borchardt B, Hopp T, Witzgall C, Levenson M, Eberhardt K, McClain M, Shen Y, Zhang X (1996) Error compensation for CMM touch trigger probes. Precis Eng J Am Soc Precis Eng 19(2–3):85–97
12.
Zurück zum Zitat Shen YL, Zhang XP (1997) Pretravel compensation for vertically oriented touch-trigger probes with straight styli. Int J Mach Tool Manu 37(3):249–262CrossRef Shen YL, Zhang XP (1997) Pretravel compensation for vertically oriented touch-trigger probes with straight styli. Int J Mach Tool Manu 37(3):249–262CrossRef
13.
Zurück zum Zitat Shen YL, Zhang XP (1999) Pretravel compensation for horizontally oriented touch trigger probes with straight styli. J Manuf Syst 18(3):175–186CrossRef Shen YL, Zhang XP (1999) Pretravel compensation for horizontally oriented touch trigger probes with straight styli. J Manuf Syst 18(3):175–186CrossRef
14.
Zurück zum Zitat Woźniak A, Dobosz M (2003) Metrological feasibilities of CMM touch trigger probes. Part I: 3D theoretical model of probe pretravel. Measurement 34(4):273–286CrossRef Woźniak A, Dobosz M (2003) Metrological feasibilities of CMM touch trigger probes. Part I: 3D theoretical model of probe pretravel. Measurement 34(4):273–286CrossRef
15.
Zurück zum Zitat Dobosz M, Woźniak A (2003) Metrological feasibilities of CMM touch trigger probes part II: experimental verification of the 3D theoretical model of probe pretravel. Measurement 34(4):287–299CrossRef Dobosz M, Woźniak A (2003) Metrological feasibilities of CMM touch trigger probes part II: experimental verification of the 3D theoretical model of probe pretravel. Measurement 34(4):287–299CrossRef
16.
Zurück zum Zitat Jankowski M, Wozniak A (2016) Mechanical model of errors of probes for numerical controlled machine tools. Measurement 77:317–326CrossRef Jankowski M, Wozniak A (2016) Mechanical model of errors of probes for numerical controlled machine tools. Measurement 77:317–326CrossRef
17.
Zurück zum Zitat Li Y, Zeng L, Tang K, Li S (2019) A dynamic pre-travel error prediction model for the kinematic touch trigger probe. Measurement 146:689–704CrossRef Li Y, Zeng L, Tang K, Li S (2019) A dynamic pre-travel error prediction model for the kinematic touch trigger probe. Measurement 146:689–704CrossRef
18.
Zurück zum Zitat Li B (2015) Design of high voltage apparatus. Beijing machinery industry press, Beijing Li B (2015) Design of high voltage apparatus. Beijing machinery industry press, Beijing
19.
Zurück zum Zitat Mandelbort BB (1982) The fractal geometry of nature. Freeman, San Francisco Mandelbort BB (1982) The fractal geometry of nature. Freeman, San Francisco
20.
Zurück zum Zitat Kogut L, Komvopoulos K (2003) Electrical contact resistance theory for conductive rough surfaces. J Appl Phys 94(5):3153–3162CrossRef Kogut L, Komvopoulos K (2003) Electrical contact resistance theory for conductive rough surfaces. J Appl Phys 94(5):3153–3162CrossRef
21.
Zurück zum Zitat Li S, Zeng L, Feng P, Li Y, Xu C, Ma Y (2019) Accurate compensation method for probe pre-travel errors in on-machine inspections. Int J Adv Manuf Technol 103(5–8):2401–2410CrossRef Li S, Zeng L, Feng P, Li Y, Xu C, Ma Y (2019) Accurate compensation method for probe pre-travel errors in on-machine inspections. Int J Adv Manuf Technol 103(5–8):2401–2410CrossRef
Metadaten
Titel
A rigid-flexible coupling pretravel error model for a touch-trigger probe in an on-machine inspection system
verfasst von
Simi Li
Pingfa Feng
Long Zeng
Shuai Wang
Yamin Li
Shaoqiu Zhang
Publikationsdatum
19.04.2021
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 9-10/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-021-06912-y

Weitere Artikel der Ausgabe 9-10/2021

The International Journal of Advanced Manufacturing Technology 9-10/2021 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.