nach oben

Metal Science and Heat Treatment

Erschienen in:

23.01.2016

A Study of the Structure of Nickel Aluminide After Laser Treatment

verfasst von: D. V. Kotoban, I. V. Shishkovskii

Erschienen in: Metal Science and Heat Treatment | Ausgabe 9-10/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The structure of coatings deposited by coaxial laser surfacing of Ni₃Al aluminide is studied. The effect of the surfacing parameters on the structure, geometry and hardness of the coatings is determined. The optimum modes of surfacing are shown to range within the laser energy input of 2 – 8 J/mm² at the beam scanning speeds of 100 – 600 mm/min and powder feed of 3.8 g/min.

Vorheriger Artikel Formation of Structure in Hard-Alloy Coatings from Powders Under Passage of a Powerful Pulse of Electric Current

Nächster Artikel Determination of the Hollomon Parameter for a Chromium-Base Refractory Alloy with the Aim of Predicting its Properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

The authors are grateful to N. G. Kakovkina and S. I. Kuznetsov for the help with the study.

I. Yu. Murov, I. A. Movchan, I. A. Yadroitsev, et al., “Experimental laser-aided additive direct production,” Vestn. MGTU “Stankin,” No. 2, 48 – 50 (2012).

S. N. Grigor’ev and I. Yu. Smurov, “Prospects of development of innovative additive production in Russia and abroad,” Innovatsii, No. 10, 2 – 8 (2013).

A. P. Nazarov “Prospects of rapid prototyping by the method of selective laser sintering_melting,” Vestn. MGTU “Stankin,” No. 4, 46 – 51 (2011).

A. V. Kamashev, A. S. Panin, A. L. Petrov, et al., “Use of a laser source for synthesis of intermetallics in the Ni – Al system,” Pis’ma Zh. Teor. Fiz., 22(12), 28 – 33 (2001).

I. Yu. Smurov, I. A. Movchan, I. A. Yadroitsev, et al., “Laser-aided additive production,” Vestn. MGTU “Stankin,” 2(4), 144 – 146 (2011).

A. V. Gusarov, M. Pavlov, and I. Smurov, “Residual stresses at laser surface remelting and additive manufacturing,” Phys. Proced., 12, 248 – 254 (2011).CrossRef

I. V. Shishkovskii, Laser Synthesis of Functional-Gradient Mesostructures and Bulky Articles [in Russian], FIZMATLIT, Moscow (2009), 424 p.

G. M. Martynov, A. B. Ljubimov, A. S. Grigoriev, and L. I. Martinova, “Multifunction numerical control solution for hybrid mechanic and laser machine tool,” in: Proced. CIRP: Fifth CIRP Conf. on High Performance Cutting 2012 (2012), Vol. 1, pp. 260 – 264.

T. V. Tarasova and E. V. Popova, “Formation of coatings by a method of overlay laser welding of powders of titanium and silicon carbide on a surface of low-carbon steel,” Metallofiz. Noveish. Tekhnol., 35(11), 1487 – 1500 (2013).

10.

I. Smurov, M. Doubenskaia, S. Grigoriev, and D. Kotoban, “Selective laser melting and direct metal deposition: from process fundamentals towards advanced products,” in: Laser Optics 2014 Int. Conf., IEEE (2014), p. 1.

11.

M. Doubenskaia, I. Smurov, S. Grigoriev, and M. Pavlov, “Complex analysis of elaboration of steel-TiC composites by direct metal deposition,” J. Laser Appl., 25(4), 210 – 217 (2013).CrossRef

12.

I. Yadroitsev, P. Bertrand, G. Antonenkova, et al., “Use of track/layer morphology to develop functional parts by selective laser melting,” J. Laser Appl., 25(5), 26 – 37 (2013).CrossRef

13.

A. Serikbol and S. N. Fedoseev, “Prospects of development of refractory alloys for aircraft engineering,” in: Research Bulletin: Modern Researches and Their Practical Application, Proc. SWorld [in Russian], Kuprienko, Odessa (2013), Vol. 10, No. 2, pp. 36 – 38.

14.

K. B. Povarova, O. A. Bazyleva, A. A. Drozdov, et al., “Structural refractory alloys based on Ni₃Al: fabrication, structure and properties,” Materialovedenie, No. 4, 39 – 48 (2011).

15.

S. Zhu, Q. Bi, J. Yang, et al., “Ni₃Al matrix high temperature self-lubricating composites,” Tribology Int., 44(4), 445 – 453 (2011).CrossRef

16.

B. A. Grinberg and M. A. Ivanov, Ni ₃ Al and TiAl Intermetallics: Microstructure, Deformation Behavior [in Russian], UrO RAN, Ekaterinburg (2002), 360 p.

17.

T. V. Tarasova and A. P. Nazarov, “A study of the processes of surface layer modification and fabrication of tree-dimensional parts by selective laser melting,” Vestn. MGTU “Stankin,” No. 2(25), 17 – 21 (2013).

18.

T. V. Tarasova, G. O. Gvozdev, and E. P. Tikhonova, “Perspectives of the use of laser radiation for surface treatment of nonferrous alloys,” Vestn. MGTU “Stankin,” No. 2, 140 – 143 (2012).

19.

R. M. Nageswara, “Materials for gas turbines – an overview,” in: E. Benini, Advances in Gas Turbine Technology, In Tech, Rijeka, Chroatia (2012), pp. 293 – 313.

20.

Y. Yu, J. Zhou, J. Jianmin Chen, et al., “Preparation, microstructure and tribological behavior of laser cladding NiAl intermetallic compound coatings,” Wear, 274 – 275, 298 – 305 (2012).CrossRef

Titel: A Study of the Structure of Nickel Aluminide After Laser Treatment
verfasst von: D. V. Kotoban
I. V. Shishkovskii
Publikationsdatum: 23.01.2016
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 9-10/2016
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-016-9929-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2016

Promising Variants of Initiation of Martensitic γ – α Transformation in Iron Alloys by a Couple of Elastic Waves

Analysis of Phase Transformations of Supercooled Austenite in Low-Alloy Steel with Boron Additives

Effect of Annealing Time and Cooling Rate on Precipitation Processes in a Duplex Corrosion-Resistant Steel

Effect of Corrosion Environment on the Stress-Strain State of Grains Under Plastic Deformation of Specimens of Steel 08Kh18N10T

Application of Magnetic Kinds of Nondestructive Inspection to Parts From Die Tool Steels

Formation of Structure in Hard-Alloy Coatings from Powders Under Passage of a Powerful Pulse of Electric Current

Premium Partner

Marktübersichten