nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

A Study on the Development of Aluminum Alloys Using the Mechanical Surface Improvement Method Using the Taguchi Method

verfasst von : Suleyman Cinar Cagan, Bellam Venkatesh, Berat Baris Buldum

Erschienen in: Emerging Trends in Mechanical Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The surface quality of the manufactured parts is an important factor affecting the functional properties such as corrosion resistance and fatigue strength of the part. For this reason, this study aims to develop surface roughness of Al 7075-T6 material which is generally used in the aviation and aerospace industry. In order to enhance the surface quality of the parts, the ball burnishing apparatus was designed and experiments were carried out at different parameters (force, feed rate, and medium). The design of the experiments was carried out using the Taguchi method, and the L₉ orthogonal array was chosen. Also, the contributions of the parameters on surface roughness have been calculated with an analysis of variance (ANOVA). Consequently, the optimum surface roughness value was reached with parameters of the force 200 N, mineral oil, and feed rate of 0.1 mm/min. The most important parameters affecting the surface quality are found to be the burnishing force, feed rate, and medium, respectively.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Investigations on Material Removal Rate During Wire Electrodischarge Machining of Nickel–Titanium Alloy

Nächstes Kapitel A Review on 4D Printing—the Next Industrial Revolution

Zainol A, Yazid M (2018) Review of development towards minimum quantity lubrication and high speed machining of aluminum 7075-T6. J Adv Manuf Technol 12(1):129–142

Rao KSS, Allamraju KV (2017) Effect on micro-hardness and residual stress in CNC turning of aluminium 7075 alloy. Mater Today Proc 4(2):975–981CrossRef

Maximov J, Anchev AP, Duncheva GV, Ganev N, Selimov KF (2017) Influence of the process parameters on the surface roughness, micro-hardness, and residual stresses in slide burnishing of high-strength aluminum alloys. J Braz Soc Mech Sci Eng 39(8):3067–3078CrossRef

Kulakowska A, Kukielka L, Kaldunski P, Bohdal L, Patyk R, Chodor J, Kukielka K (2018) Burnishing rolling process of the surface prepared in the turning process. In: AIP conference proceedings, vol 1960, no 1, pp 070016-1–070016-6

Hemanth S, Harish A, Bharadwaj RN, Bhat AB, Sriharsha C (2018) Design of roller burnishing tool and its effect on the surface integrity of Al 6061. Mater Today Proc 5(5):12848–12854CrossRef

Yuan X, Sun Y, Li C, Liu W (2017) Experimental investigation into the effect of low plasticity burnishing parameters on the surface integrity of TA2. Int J Adv Manuf Technol 88(1–4):1089–1099CrossRef

Amdouni H, Bouzaiene H, Montagne A, Van Gorp A, Coorevits T, Nasri M, Iost A (2017) Experimental study of a six new ball-burnishing strategies effects on the Al-alloy flat surfaces integrity enhancement. Int J Adv Manuf Technol 90(5–8):2271–2282CrossRef

Patel KA, Brahmbhatt PK (2015) Surface roughness prediction for roller burnishing of Al alloy 6061 using response surface method. Int J Sci Eng Res 6(3):636–640

Pacana A (2018) Application of function of quality losses G. Taguchi for study of roller burnishing parameters. In: MATEC web of conferences, vol 183, p 03007CrossRef

10.

Rodríguez A, de Lacalle LL, Celaya A, Lamikiz A, Albizuri J (2012) Surface improvement of shafts by the deep ball-burnishing technique. Surf Coat Technol 206(11–12):2817–2824CrossRef

11.

Buldum BB, Bayhan B (2018) Effect of ball-burnishing parameters on surface roughness and surface hardness of aluminum alloy 6013. Mater Test 60(4):418–422CrossRef

12.

Ugurlu M, Cagan SC, Buldum BB (2017) Improvement of surface roughness using ANOVA for AZ31B magnesium alloy with ball burnishing process. Int J Engine Res Technol 6(9):216–221

13.

Amini S, Bagheri A, Teimouri R (2018) Ultrasonic-assisted ball burnishing of aluminum 6061 and AISI 1045 steel. Mater Manuf Process 33(11):1250–1259CrossRef

14.

Ye H, Lai L-S, Li J, Liu S-Z, Xiong H (2018) Surface properties of 7075 aluminum alloy workpieces after ultrasonic burnishing processing. Surf Technol 2:002

15.

López de Lacalle LN, Rodriguez A, Lamikiz A, Celaya A, Alberdi R (2011) Five-axis machining and burnishing of complex parts for the improvement of surface roughness. Mater Manuf Process 26(8):997–1003CrossRef

16.

García-Granada AA, Gomez-Gras G, Jerez-Mesa R, Travieso-Rodriguez JA, Reyes G (2017) Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4. Mater Manuf Process 32(11):1279–1289CrossRef

17.

Denkena B, Grove T, Maiss O (2017) Surface texturing of rolling elements by hard ball-end milling and burnishing. Int J Adv Manuf Technol 93(9–12):3713–3721CrossRef

18.

Cicek A, Kıvak T, Ekici E (2015) Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills. J Intell Manuf 26(2):295–305CrossRef

19.

Dehnad K (2012) Quality control, robust design, and the Taguchi method. Springer Science & Business Media

20.

He C, Zong W, Zhang JJ (2018) Influencing factors and theoretical modeling methods of surface roughness in turning process: State-of-the-art. Int J Mach Tools Manuf 129:15–26CrossRef

21.

Aldas K, Ozkul I, Akkurt A (2014) Modelling surface roughness in WEDM process using ANFIS method. J Balkan Tribol Assoc 20(4):548–558

22.

El-Taweel T, El-Axir M (2009) Analysis and optimization of the ball burnishing process through the Taguchi technique. Int J Adv Manuf Technol 41(3–4):301–310CrossRef

23.

Nemat M, Lyons A (2000) An investigation of the surface topography of ball burnished mild steel and aluminium. Int J Adv Manuf Technol 16(7):469–473CrossRef

Titel: A Study on the Development of Aluminum Alloys Using the Mechanical Surface Improvement Method Using the Taguchi Method
verfasst von: Suleyman Cinar Cagan
Bellam Venkatesh
Berat Baris Buldum
Verlag: Springer Singapore
Buch: Emerging Trends in Mechanical Engineering
Print ISBN: 978-981-329-930-6

Electronic ISBN: 978-981-329-931-3

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-981-32-9931-3_31

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht