Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600

verfasst von: Harinadh Vemanaboina, R. Gopi Chandh, P. Sivakrishna, A. Kishore Kumar, K. Malli Karjuna, Y. Sailinga Reddy

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

Gas tungsten arc welding process can be adaptable for all metals and can be used for all welding positions. It can be operated in both continues and pulsed mode current. The present study has been carried out with pulsed current gas tungsten arc welding of Inconel600 with three passes, and the filler wire of ERNiCrMo-3 has been considered. The single V-groove is employed for joining the plates with three passes welding. The residual stresses and tensile strength in weldments are studied. X-ray diffraction (XRD) technique is used to measure residual stresses. The measurement is carried out on the surface across the welding direction. The tensile residual stresses are observed at the fusion zone. The tensile strength of the weldment is higher than that of the base metal.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Ravisankar A, Velaga SK, Rajput G, Venugopal S (2014) Influence of welding speed and power on residual stress during gas tungsten arc welding (GTAW) of thin sections with constant heat input: a study using numerical simulation and experimental validation. J Manuf Process 16(2):200–211 CrossRef Ravisankar A, Velaga SK, Rajput G, Venugopal S (2014) Influence of welding speed and power on residual stress during gas tungsten arc welding (GTAW) of thin sections with constant heat input: a study using numerical simulation and experimental validation. J Manuf Process 16(2):200–211 CrossRef
2.
Zurück zum Zitat Deng D, Murakawa H (2008) Prediction of welding distortion and residual stress in a thin plate butt-welded joint. Comput Mater Sci 43(2):353–365 CrossRef Deng D, Murakawa H (2008) Prediction of welding distortion and residual stress in a thin plate butt-welded joint. Comput Mater Sci 43(2):353–365 CrossRef
3.
Zurück zum Zitat Deng D, Murakawa H (2006) Prediction of welding residual stress in multi-pass butt-welded modified 9Cr–1Mo steel pipe considering phase transformation Effects. Comput Mater Sci 37(3):209–219 Deng D, Murakawa H (2006) Prediction of welding residual stress in multi-pass butt-welded modified 9Cr–1Mo steel pipe considering phase transformation Effects. Comput Mater Sci 37(3):209–219
4.
Zurück zum Zitat Yaghi AH, Hyde TH, Becker AA, Sun W (2013) Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal IN625. Int J Press Vessels Pip 111–112:173–186 Yaghi AH, Hyde TH, Becker AA, Sun W (2013) Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal IN625. Int J Press Vessels Pip 111–112:173–186
5.
Zurück zum Zitat Muránsky O, Smith MC, Bendeich PJ, Holden TM, Luzin V, Martins RV, Edwards L (2012) Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements. Int J Solids Struct 49(9):1045–1062 Muránsky O, Smith MC, Bendeich PJ, Holden TM, Luzin V, Martins RV, Edwards L (2012) Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements. Int J Solids Struct 49(9):1045–1062
6.
Zurück zum Zitat Bhatti AA, Barsoum Z, Khurshid M (2014) Development of a finite element simulation framework for the prediction of residual stresses in large welded structures. Comput Struct 133:1–11 Bhatti AA, Barsoum Z, Khurshid M (2014) Development of a finite element simulation framework for the prediction of residual stresses in large welded structures. Comput Struct 133:1–11
7.
Zurück zum Zitat Bhatti AA, Barsoum Z, Murakawa H, Barsoum I (2015) Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion. Mater Des 65:878–889 Bhatti AA, Barsoum Z, Murakawa H, Barsoum I (2015) Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion. Mater Des 65:878–889
8.
Zurück zum Zitat Harinadh V, Edison G, Akella S, Sanjeeva Reddy L, Buddu RK (2017) Multipass welding on inconel material with pulsed current gas tungsten arc welding. Mater Today Proc 4(2):1452–1458 Harinadh V, Edison G, Akella S, Sanjeeva Reddy L, Buddu RK (2017) Multipass welding on inconel material with pulsed current gas tungsten arc welding. Mater Today Proc 4(2):1452–1458
9.
Zurück zum Zitat Vemanaboina H, Akella S, Buddu RK (2014) Welding process simulation model for temperature and residual stress analysis. Procedia Mater Sci 6:1539–1546 Vemanaboina H, Akella S, Buddu RK (2014) Welding process simulation model for temperature and residual stress analysis. Procedia Mater Sci 6:1539–1546
10.
Zurück zum Zitat Vemanaboina H, Edison G, Akella S, Buddu RK (2018), Effect of residual stresses of GTA welding for dissimilar materials. Mater Res 21(4) Vemanaboina H, Edison G, Akella S, Buddu RK (2018), Effect of residual stresses of GTA welding for dissimilar materials. Mater Res 21(4)
11.
Zurück zum Zitat Vemanaboina H, Edison G, Akella S, Buddu RK (2018) Simulation of hybrid laser-TIG welding process using FEA. J Eng Sci Technol 13(6):1782–1792 Vemanaboina H, Edison G, Akella S, Buddu RK (2018) Simulation of hybrid laser-TIG welding process using FEA. J Eng Sci Technol 13(6):1782–1792
12.
Zurück zum Zitat Xia J, Jin H (2016) Numerical study of welding simulation and residual stress on butt welding of dissimilar thickness of austenitic stainless steel. Int J Adv Manuf Technol 91(1–4):227–235 Xia J, Jin H (2016) Numerical study of welding simulation and residual stress on butt welding of dissimilar thickness of austenitic stainless steel. Int J Adv Manuf Technol 91(1–4):227–235
13.
Zurück zum Zitat Haigh RD, Hutchings MT, James JA, Ganguly S, Mizuno R, Ogawa K, Okido S, Paradowska AM, Fitzpatrick ME (2013) Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. Int J Press Vessels Pip 101:1–11 Haigh RD, Hutchings MT, James JA, Ganguly S, Mizuno R, Ogawa K, Okido S, Paradowska AM, Fitzpatrick ME (2013) Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. Int J Press Vessels Pip 101:1–11
14.
Zurück zum Zitat Monin VI, Lopes RT, Turibus SN, Payão Filho JC, de Assis JT (2014) X-ray diffraction technique applied to study of residual stresses after welding of duplex stainless-steel plates. Mater Res 17(Suppl-1):64–69 Monin VI, Lopes RT, Turibus SN, Payão Filho JC, de Assis JT (2014) X-ray diffraction technique applied to study of residual stresses after welding of duplex stainless-steel plates. Mater Res 17(Suppl-1):64–69
15.
Zurück zum Zitat Moussaoui K, Segonds S, Rubio W, Mousseigne M (2016) Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Mater Sci Eng A 667:340–348 Moussaoui K, Segonds S, Rubio W, Mousseigne M (2016) Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Mater Sci Eng A 667:340–348
16.
Zurück zum Zitat Holmberg J, Steuwer A, Stormvinter A (2016) Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from Lab-XRD. Mater Sci Eng A 667:199–207 Holmberg J, Steuwer A, Stormvinter A (2016) Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from Lab-XRD. Mater Sci Eng A 667:199–207
17.
Zurück zum Zitat Zauskova L, Czan A, Sajgalik M, Drbul M, Rysava Z (2017) Triaxial measurement of residual stress after high feed milling using X-ray diffraction. Procedia Eng 192:982–987 Zauskova L, Czan A, Sajgalik M, Drbul M, Rysava Z (2017) Triaxial measurement of residual stress after high feed milling using X-ray diffraction. Procedia Eng 192:982–987
Metadaten
Titel
A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600
verfasst von
Harinadh Vemanaboina
R. Gopi Chandh
P. Sivakrishna
A. Kishore Kumar
K. Malli Karjuna
Y. Sailinga Reddy
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_57

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.