Skip to main content


Acta Mechanica

Acta Mechanica 3/2019

Ausgabe 3/2019

Inhaltsverzeichnis ( 29 Artikel )

04.02.2019 | Editorial | Ausgabe 3/2019

Thanks to our reviewers

28.11.2018 | Review and Perspective in Mechanics | Ausgabe 3/2019

Failure modes and mechanisms for rechargeable Lithium-based batteries: a state-of-the-art review

Dandan Lyu, Bo Ren, Shaofan Li

16.02.2019 | Original Paper | Ausgabe 3/2019

Numerical scheme for simulation of transient flows of non-Newtonian fluids characterised by a non-monotone relation between the symmetric part of the velocity gradient and the Cauchy stress tensor

Adam Janečka, Josef Málek, Vít Průša, Giordano Tierra

12.11.2018 | Original Paper | Ausgabe 3/2019

Infinitesimal deformations and stability of rods made of nonlocal elastic materials

Marzio Lembo

13.11.2018 | Original Paper | Ausgabe 3/2019

Modeling size-dependent thermoelastic energy dissipation of graphene nanoresonators using nonlocal elasticity theory

S. Rashahmadi, S. A. Meguid

16.11.2018 | Original Paper | Ausgabe 3/2019

The electric field effect on the droplet collision with a heated surface in the Leidenfrost regime

H. Nazari, P. Pournaderi

17.11.2018 | Original Paper | Ausgabe 3/2019

Influences of interface properties on the wave propagation in the dipolar gradient elastic solid

Yueqiu Li, Peijun Wei

19.11.2018 | Original Paper | Ausgabe 3/2019

Delamination influence on elastic properties of laminated composites

Humberto Brito-Santana, Bruno Guilherme Christoff, Antonio Joaquim Mendes Ferreira, Frédéric Lebon, Reinaldo Rodríguez-Ramos, Volnei Tita

21.11.2018 | Original Paper | Ausgabe 3/2019

On Stefan-type moving boundary problems with heterogeneity: canonical reduction via conjugation of reciprocal transformations

Colin Rogers

07.12.2018 | Original Paper | Ausgabe 3/2019

Modified couple stress theory in orthogonal curvilinear coordinates

Hamed Farokhi, Mergen H. Ghayesh

11.12.2018 | Original Paper | Ausgabe 3/2019

On a new type of solving procedure for Euler–Poisson equations (rigid body rotation over the fixed point)

Sergey V. Ershkov, Dmytro Leshchenko

12.12.2018 | Original Paper | Ausgabe 3/2019

Comparison of nano-plate bending behaviour by Eringen nonlocal plate, Hencky bar-net and continualised nonlocal plate models

Y. P. Zhang, N. Challamel, C. M. Wang, H. Zhang

12.12.2018 | Original Paper | Ausgabe 3/2019

Circumferential gap and partial debonding effects on buckling loads and modes of slender CFST circular columns

Simon Schnabl, Igor Planinc

13.12.2018 | Original Paper | Ausgabe 3/2019

Spatial ANCF/CRBF beam elements

Shubhankar Kulkarni, Ahmed A. Shabana

13.12.2018 | Original Paper | Ausgabe 3/2019

A textile architecture-based hyperelastic model for rubbers reinforced by knitted fabrics

Rui Li, Dianyun Zhang

13.12.2018 | Original Paper | Ausgabe 3/2019

Sound transmission through triple plates separated by air cavities in the low-frequency range

Akintoye Olumide Oyelade, Obanishola Mufutau Sadiq, Omotayo A. Fakinlede

13.12.2018 | Original Paper | Ausgabe 3/2019

Elasticity solution for orthotropic FGM plates with dissimilar stiffness coefficient variations

K. Bhaskar, Adarsh Ravindran

14.12.2018 | Original Paper | Ausgabe 3/2019

Transient analysis of diffusion-induced stress: effect of solid reaction

Yaohong Suo, Fuqian Yang

14.12.2018 | Original Paper | Ausgabe 3/2019

A design of active elastic metamaterials with negative mass density and tunable bulk modulus

Sheng Sang, Anwer Mhannawee, Ziping Wang

14.12.2018 | Original Paper | Ausgabe 3/2019

“Resonance” phenomenon of kinematic excitation by a spherical body in a semi-infinite cylindrical vessel filled with liquid

Veniamin D. Kubenko, Ihor V. Yanchevskyi

15.12.2018 | Original Paper | Ausgabe 3/2019

Acousto-elastic theory for the coupling parameters in terms of nonlinear elastic, piezoelectric, electrostrictive, and dielectric constants in trigonal and hexagonal crystalline systems: applied in the crystal and solid-state physics

Farid Takali, Souhir Msedi, Cherif Othmani, Anouar Njeh, Wolfgang Donner, Mohamed Hedi Ben Ghozlen

17.12.2018 | Original Paper | Ausgabe 3/2019

Computational modelling of multi-stage hydraulic fractures under stress shadowing and intersecting with pre-existing natural fractures

B. Sobhaniaragh, M. Haddad, W. J. Mansur, F. C. Peters

18.12.2018 | Original Paper | Ausgabe 3/2019

First-order perturbation-based stochastic homogenization method applied to microscopic damage prediction for composite materials

Tien-Dat Hoang, Naoki Takano

27.12.2018 | Original Paper | Ausgabe 3/2019

Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells

Saeid Sahmani, Mohamad Fotouhi, Mohammad Mohammadi Aghdam

02.01.2019 | Original Paper | Ausgabe 3/2019

On the nanoscale behaviour of single-wall C, BN and SiC nanotubes

Alessandra Genoese, Andrea Genoese, Ginevra Salerno

02.01.2019 | Original Paper | Ausgabe 3/2019

Exact steady-state solution to air pumping from underground partly covered by an impermeable tarp

V. V. Mityushev, P. M. Adler

02.01.2019 | Original Paper | Ausgabe 3/2019

Computer implementation of piecewise cable element based on the absolute nodal coordinate formulation and its application in wire modeling

Peng Lan, Kun Li, Zuqing Yu

02.01.2019 | Original Paper | Ausgabe 3/2019

Three-dimensional analytical model for the dynamic interaction of twin tunnels in a homogeneous half-space

Chao He, Shunhua Zhou, Peijun Guo, Quanmei Gong

03.01.2019 | Original Paper | Ausgabe 3/2019

Coupling effect of surface energy and dispersion forces on nonlinear size-dependent pull-in instability of functionally graded micro-/nanoswitches

Mohamed A. Attia, Salwa A. Mohamed

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.