nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Additive Manufactured (3D-Printed) Connections for Thermoplastic Facades

verfasst von : Ina Cheibas, Ringo Perez Gamote, Beril Önalan, Ena Lloret-Fritschi, Fabio Gramazio, Matthias Kohler

Erschienen in: Trends on Construction in the Digital Era

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Additive manufactured thermoplastic facades are an emerging topic in the building industry. Such building envelopes have free-form designs, which can enable sustainable solutions. However, the connections between the panels of these thermoplastic facades have not been investigated. These joints are not yet integrated into the 3D-printed facade design. Consequently, there is a research gap in designing holistic connections in additively manufactured facades. This paper is a foundation study that aims to find suitable design parameters for such connections. It is an initial analysis in the emerging field of AM facades, aiming to tackle the fundamentals of designing for 3D-printed facade assembly. The study highlights a series of possible constraints and opportunities in connecting discretized 3D printed panels. This step is essential for identifying new design opportunities in the emerging topic of additive manufactured facades.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel A Toolbox for the Automatic Interpretation of Bender Element Tests in Geomechanics

Nächstes Kapitel Auto(mated)nomous Assembly

Camacho, D.D., et al.: Applications of additive manufacturing in the construction industry – a forward-looking review. Autom. Constr. 89, 110–119 (2018). https://doi.org/10.1016/j.autcon.2017.12.031CrossRef

Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q., Hui, D.: Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos. Part B Eng. 143(February), 172–196 (2018)CrossRef

Paolini, A., Kollmannsberger, S., Rank, E.: Additive manufacturing in construction: a review on processes, applications, and digital planning methods. Addit. Manuf. 30(October) 100894 (2019)

Marco, A., Ghasemieshkaftaki, M., Ortiz, M.A., Bluyssen, P.M.: An overview of transparent and translucent 3D-printed façade prototypes and technologies (2021)

Mitchell, A., Lafont, U., Hołyńska, M., Semprimoschnig, C.: Additive manufacturing — a review of 4D printing and future applications. Addit. Manuf. 24, 606–626 (2018). https://doi.org/10.1016/j.addma.2018.10.038CrossRef

Grassi, G., Spagnolo, S.L., Paoletti, I.: Fabrication and durability testing of a 3D printed façade for desert climates. Addi. Manuf. 28, 439–444 (2019). https://doi.org/10.1016/j.addma.2019.05.023CrossRef

Kwon, H., Kyttas, T., Dillenburger, B.: Electrical skin: 3D-printed façade panel with integrated electric infrastructure. Conf. Adv. Build. Ski. 2019, 794–804 (2019)

Böke, J., Knaack, U., Hemmerling, M.: State-of-the-art of intelligent building envelopes in the context of intelligent technical systems. Intell. Build. Int. 11(1), 27–45 (2019)CrossRef

Volkers, J.N.: The future for Additive Manufacturing in Façade Design a strategic roadmap towards a preferable future, 139 (2010)

10.

Group, L.Y., Arachne 3D printed building façade. https://www.e-architect.co.uk/china/arachne-3d-printed-building-facade-building-facade (2022). Retrieved 25 Feb 2022

11.

3D-printed for insulating glass units. Okalux/BASF/TU Darmstadt. Adv. Build. Ski. (2019)

12.

3D Printed Wall: IAAC, 2016–2017. https://iaac.net/project/terraperforma/. Retrieved 19 Jan 2022

13.

House of DUSAectual. Urban Cabin. https://houseofdus.com/work/#project-urban-cabin. Accessed 19 Jan 2022 (2017)

14.

3F Studio. Fluid Morphology. https://www.archdaily.com/912560/david-wolfertstetter-and-tum-design-a-3d-printed-facade-for-munichs-deutsches-museum?ad_medium=gallery. Accessed 19 Jan 2022 (2019)

15.

Taseva, Y., Eftekhar, N.I.K., Kwon, H., Leschok, M., Dillenburger, B.: Large-scale 3d printing for functionally-graded facade. 1, 183–192

16.

Mungenast, M.B., 3D-Printed Future Facade. Technische Universität München (2019)

17.

3D-printed inserts for insulating glass units. Okalux/BASF/TU Darmstadt. Adv. Build. Ski. (2019)

18.

Sarakinioti, M.V., et al.: Development and prototyping of an integrated 3D-printed façade for thermal regulation in complex geometries. J. Facade Des. Eng. 6(2), 29–40 (2018)

19.

Seshadri, B., Cheibas, I., Leschok, M., Piccioni, V., Hischier, I., Schlüter, A.: Parametric design of an additively manufactured building façade for bespoke response to solar radiation. J. Phys. Conf. Ser. 2042(1) (2021)

20.

Klahn, C., Singer, D., Meboldt, M.: Design guidelines for additive manufactured snap-fit joints. Procedia CIRP 50, 264–269 (2016). https://doi.org/10.1016/j.procir.2016.04.130CrossRef

21.

Schmidt, M.K.: Lock-strip gasket system retrofit: a case history. ASTM International (2004)

22.

Rosato, M.G., Rosato, D.V.: Plastics Design Handbook. Springer Science& Business Media (2013)

23.

Genc, S., Messler, R.W., Gabriele, G.A.: A systematic approach to integral snap-fit attachment design. Res. Eng. Des. - Theory, Appl. Concurr. Eng. 10(2), 84–93 (1998)

24.

Erhard, G.: Designing with plastics. Des. with Plast. 1–517 (2006)

25.

Knaack, U., Koenders, E.: Building Physics of the Envelope: Principles of Construction. Birkhäuser (2018)

26.

Iordache, V., Catalina, T.: Acoustic approach for building air permeability estimation. Build. Environ. 57, 18–27 (2012)CrossRef

27.

Torres-Ramo, J., González-Martínez, P., Arriazu-Ramos, N., Sánchez-Ostiz, A.: Influence of the water vapour permeability of airtight sheets on the behaviour of facade. Sustain 12(24), 1–18 (2020)

28.

Kováčová, M., et al.: Novel hybrid PETG composites for 3D printing. Applied Sciences 10(9), 3062 (2020)

29.

Aguilera, E., et al.: 3D printing of electro mechanical systems. In: 24th Int. SFF Symp. - An Addit. Manuf. Conf. SFF 2013, pp. 950–961 (2013)

30.

Kumar, M.A., Khan, M.S., Mishra, S.B.: Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics. Mater. Today Proc. 27, 975–983 (2020)CrossRef

31.

Vidakis, N., Petousis, M., Velidakis, E., Liebscher, M., Mechtcherine, V., Tzounis, L.: On the strain rate sensitivity of fused filament fabrication (Fff) processed pla, abs, petg, pa6, and pp thermoplastic polymers. Polymers (Basel) 12(12), 1–15 (2020)CrossRef

32.

ABB, Industrial Robots. https://webshop.robotics.abb.com/de/. Accessed 19 Jan 2022 (2022)

33.

UR5. Universal Robots. https://www.universal-robots.com/. Accessed 19 Jan 2022 (2022)

34.

R. V.6.0: Commercial 3D computer graphics and computer-aided design (CAD) application software. https://www.rhino3d.com/. Retrieved 04 Jun 2020

35.

Grasshopper: Visual programming language, plugin for Rhinoceros. https://www.rhino3d.com/6/new/grasshopper. Retrieved 04 Jun 2020

36.

Python: Programming language. https://www.python.org/. Retrieved 04 Jun 2020

37.

COMPAS: Python-based computational framework for collaboration and research in architecture, structural engineering and digital fabrication. https://compas-dev.github.io/. Retrieved 04 Jun 2020

38.

ITA_Institute_of_Technology_in_Architecture. Robotic Fabrication Laboratory, 2010–2016. https://ita.arch.ethz.ch/archteclab/rfl.html. Accessed 19 Jan 2022 (2022)

39.

CEAD_Extruder: Pellet extruder for composite thermoplastic 3D printing. https://robotextruder.com/ (2020). Retrieved 23 Oct 2020

40.

Latko-Durałek, P., Dydek, K., Boczkowska, A.: Thermal, rheological and mechanical properties of PETG/rPETG blends. J. Polym. Environ. 27(11), 2600–2606 (2019). https://doi.org/10.1007/s10924-019-01544-6CrossRef

41.

Extrudr. PETG transparent. https://www.extrudr.com/de/produkte/catalogue/?material=94. Accessed 19 Jan 2022 (2022)

42.

Extrudr. Flex Semisoft transparent. https://www.extrudr.com/de/produkte/catalogue/?material=115. Accessed 19 Jan 2022 (2022)

Titel: Additive Manufactured (3D-Printed) Connections for Thermoplastic Facades
verfasst von: Ina Cheibas
Ringo Perez Gamote
Beril Önalan
Ena Lloret-Fritschi
Fabio Gramazio
Matthias Kohler
Verlag: Springer International Publishing
Buch: Trends on Construction in the Digital Era
Print ISBN: 978-3-031-20240-7

Electronic ISBN: 978-3-031-20241-4

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-20241-4_11

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"