Skip to main content

2013 | OriginalPaper | Buchkapitel

10. Adhesion and Indentation Fracture Behavior of Silicon Carbonitride Nanocomposite Coatings Deposited by Magnetron Sputtering

verfasst von : S. K. Mishra, A. S. Bhattacharyya

Erschienen in: Silicon-based Nanomaterials

Verlag: Springer New York

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The ternary nanocomposite material Si–C–N was first introduced to the scientific community as a high temperature oxidation resistant polymer-derived ceramic (PDCs).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Riedal, R., Kleebe. H.J., Schoenfelder, H., Aldinger, F.: A covalent micro/nano composite resistant to high temperature oxidation. Nature 374, 526–528 (1995) Riedal, R., Kleebe. H.J., Schoenfelder, H., Aldinger, F.: A covalent micro/nano composite resistant to high temperature oxidation. Nature 374, 526–528 (1995)
2.
Zurück zum Zitat Bill, J., Seitz, J., Thurn, G., Dürr, J., Canel, J., Janos, B.Z., Jalomecki, A., Santez, D., Schempp, S., Lamparter, H.P., Mayer, J., Aldinger, F.: Structure analysis and properties of Si–C–N ceramics derived from polysilazanes, Phys. Status Solidif A 166, 269 (1998) Bill, J., Seitz, J., Thurn, G., Dürr, J., Canel, J., Janos, B.Z., Jalomecki, A., Santez, D., Schempp, S., Lamparter, H.P., Mayer, J., Aldinger, F.: Structure analysis and properties of Si–C–N ceramics derived from polysilazanes, Phys. Status Solidif A 166, 269 (1998)
3.
Zurück zum Zitat Raj, R., Riedel, R., Soraru, G.D.: Introduction to the special topical issue on ultrahigh-temperature polymer-derived ceramics. J. Am. Ceram. Soc. 84(10), 2158–2159 (2001)CrossRef Raj, R., Riedel, R., Soraru, G.D.: Introduction to the special topical issue on ultrahigh-temperature polymer-derived ceramics. J. Am. Ceram. Soc. 84(10), 2158–2159 (2001)CrossRef
4.
Zurück zum Zitat Ferreira, I., Fortunato, E., Vilarinho, P., Viana, A.S., Ramos, A.R., Alves, E., Martins, R.: Hydrogenated silicon carbon nitride films obtained by HWCVD PA-HWCVD and PECVD techniques. J. Non-Crystal. Solids 352, 1361–1366 (2006)CrossRef Ferreira, I., Fortunato, E., Vilarinho, P., Viana, A.S., Ramos, A.R., Alves, E., Martins, R.: Hydrogenated silicon carbon nitride films obtained by HWCVD PA-HWCVD and PECVD techniques. J. Non-Crystal. Solids 352, 1361–1366 (2006)CrossRef
5.
Zurück zum Zitat Berlind, T., Hellgren, N., Johansson, M.P., Hultman, L.: Microstructure, mechanical properties, and wetting behavior of Si–C–N thin films grown by reactive magnetron sputtering Surf. Coat. Technol. 141, 145–155 (2001) Berlind, T., Hellgren, N., Johansson, M.P., Hultman, L.: Microstructure, mechanical properties, and wetting behavior of Si–C–N thin films grown by reactive magnetron sputtering Surf. Coat. Technol. 141, 145–155 (2001)
6.
Zurück zum Zitat Janakiraman, N., Aldinger, F.: Indentation analysis of elastic and plastic deformation of precursor-derived Si–C–N ceramics. J. Eur. Ceram. Soc. 30, 775–785 (2010)CrossRef Janakiraman, N., Aldinger, F.: Indentation analysis of elastic and plastic deformation of precursor-derived Si–C–N ceramics. J. Eur. Ceram. Soc. 30, 775–785 (2010)CrossRef
7.
Zurück zum Zitat Mishra, S.K., Gaur, H., Rupa, P.K.P., Pathak, L.C.: Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. J. Vac. Sci. Technol. B 24, 1311 (2006)CrossRef Mishra, S.K., Gaur, H., Rupa, P.K.P., Pathak, L.C.: Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. J. Vac. Sci. Technol. B 24, 1311 (2006)CrossRef
8.
Zurück zum Zitat Mishra, S.K., Shekhar, C., Rupa, P.K.P., Pathak, L.C.: Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films 515, 4738 (2007)CrossRef Mishra, S.K., Shekhar, C., Rupa, P.K.P., Pathak, L.C.: Effect of pressure and substrate temperature on the deposition of nano-structured silicon–carbon–nitride superhard coatings by magnetron sputtering. Thin Solid Films 515, 4738 (2007)CrossRef
9.
Zurück zum Zitat Kroke, E., Li-Li, Y., Konetschney, C., Lecomte, E., Fasel, C., Riedel, R.: Mater. Sci. Eng. 26, 97 (2000)CrossRef Kroke, E., Li-Li, Y., Konetschney, C., Lecomte, E., Fasel, C., Riedel, R.: Mater. Sci. Eng. 26, 97 (2000)CrossRef
10.
Zurück zum Zitat Meyer, E.: Untersuchungen uber Harteprugung und Harte. Phys. Z. 9, 66–74 (1980) Meyer, E.: Untersuchungen uber Harteprugung und Harte. Phys. Z. 9, 66–74 (1980)
11.
Zurück zum Zitat Thomas, A.: Microhardness measurement as a quality control technique for thin, hard coatings. Surf. Eng. 3, 117–22 (1987) Thomas, A.: Microhardness measurement as a quality control technique for thin, hard coatings. Surf. Eng. 3, 117–22 (1987)
12.
Zurück zum Zitat Tabor, D.: The Hardness of Metals. Clarendon Press, Oxford (1951) Tabor, D.: The Hardness of Metals. Clarendon Press, Oxford (1951)
13.
Zurück zum Zitat Jönsson, B., Hogmark, S.: Hardness measurements of thin films. Thin Solid Films 114, 257–69 (1984) Jönsson, B., Hogmark, S.: Hardness measurements of thin films. Thin Solid Films 114, 257–69 (1984)
14.
Zurück zum Zitat Sargent, P.M.: Ph.D. Thesis, University of Cambridge, UK (1979) Sargent, P.M.: Ph.D. Thesis, University of Cambridge, UK (1979)
15.
Zurück zum Zitat Burnett, P.J., Rickerby, D.S.: The mechanical properties of wear-resistant coatings: I: modelling of hardness behaviour. Thin Solid Films 148, 41–50 (1987)CrossRef Burnett, P.J., Rickerby, D.S.: The mechanical properties of wear-resistant coatings: I: modelling of hardness behaviour. Thin Solid Films 148, 41–50 (1987)CrossRef
16.
Zurück zum Zitat Burnett, P.J., Rickerby, D.S.: The mechanical properties of wear-resistant coatings: II: experimental studies and interpretation of hardness. Thin Solid Films 148, 51–65 (1987)CrossRef Burnett, P.J., Rickerby, D.S.: The mechanical properties of wear-resistant coatings: II: experimental studies and interpretation of hardness. Thin Solid Films 148, 51–65 (1987)CrossRef
17.
Zurück zum Zitat Bull, S.J., Rickerby, D.S.: New developments in the modeling of the hardness and scratch adhesion of thin films. Surf. Coat. Technol. 42, 149–64 (1990) Bull, S.J., Rickerby, D.S.: New developments in the modeling of the hardness and scratch adhesion of thin films. Surf. Coat. Technol. 42, 149–64 (1990)
18.
Zurück zum Zitat Chicot, D., Lesage, J.: Absolute hardness of films and coating. Thin Solid Films 254, 123–130 (1995)CrossRef Chicot, D., Lesage, J.: Absolute hardness of films and coating. Thin Solid Films 254, 123–130 (1995)CrossRef
19.
Zurück zum Zitat Ichimura, H., Rodriguez, F.M., Rodrigo, A.: The composite and film hardness of TiN coatings prepared by cathodic arc evaporation. Surf. Coat. Technol. 127, 138–143 (2000)CrossRef Ichimura, H., Rodriguez, F.M., Rodrigo, A.: The composite and film hardness of TiN coatings prepared by cathodic arc evaporation. Surf. Coat. Technol. 127, 138–143 (2000)CrossRef
20.
Zurück zum Zitat Korsunsky, A.M., McGurk, M.R., Bull, S.J., Page, T.F.: On the hardness of coated systems. Surf. Coat. Technol. 99, 171–183 (1998)CrossRef Korsunsky, A.M., McGurk, M.R., Bull, S.J., Page, T.F.: On the hardness of coated systems. Surf. Coat. Technol. 99, 171–183 (1998)CrossRef
21.
Zurück zum Zitat Puchi-Cabrera, E.S.: A new model for the computation of the composite hardness of coated systems. Surf. Coat. Technol. 160, 177–186 (2002) Puchi-Cabrera, E.S.: A new model for the computation of the composite hardness of coated systems. Surf. Coat. Technol. 160, 177–186 (2002)
22.
Zurück zum Zitat Bull, S.J.: Nanoindentation of coatings. J. Phys. D: Appl. Phys. 38, 393–413 (2005)CrossRef Bull, S.J.: Nanoindentation of coatings. J. Phys. D: Appl. Phys. 38, 393–413 (2005)CrossRef
23.
Zurück zum Zitat Bhattacharyya, A.S., Das, G.C., Mukherjee, S., Mishra, S.K.: Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum 83, 1464–1469 (2009)CrossRef Bhattacharyya, A.S., Das, G.C., Mukherjee, S., Mishra, S.K.: Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum 83, 1464–1469 (2009)CrossRef
24.
Zurück zum Zitat Bhattacharyya, A.S., Mishra, S.K., Das, G.C.: Mukherjee shot properties. Eur. Coat. J. 3, 108–114 (2009) Bhattacharyya, A.S., Mishra, S.K., Das, G.C.: Mukherjee shot properties. Eur. Coat. J. 3, 108–114 (2009)
25.
Zurück zum Zitat Bhattacharyya, A.S., Mishra, S.K., Mukherjee, S., Das, G.C.: A comparative study of Si–C–N films on different substrates grown by RFmagnetron sputtering. J. Alloys Comp. 478, 474–478 (2009) Bhattacharyya, A.S., Mishra, S.K., Mukherjee, S., Das, G.C.: A comparative study of Si–C–N films on different substrates grown by RFmagnetron sputtering. J. Alloys Comp. 478, 474–478 (2009)
26.
Zurück zum Zitat Lube, T.: Indentation crack profiles in silicon nitride. J. Eur. Ceram. Soc. 21, 211–218 (2001)CrossRef Lube, T.: Indentation crack profiles in silicon nitride. J. Eur. Ceram. Soc. 21, 211–218 (2001)CrossRef
27.
Zurück zum Zitat Chicot, D., Duarte, G., Tricoteaux, A., Jorgowski, B., Leriche, A., Lesage, J.: Vickers indentation fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings. Mater. Sci. Eng. A 527, 65–76 (2009)CrossRef Chicot, D., Duarte, G., Tricoteaux, A., Jorgowski, B., Leriche, A., Lesage, J.: Vickers indentation fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings. Mater. Sci. Eng. A 527, 65–76 (2009)CrossRef
28.
Zurück zum Zitat Burnett, P.J., Rickery, D.S.: The scratch adhesion test an elastic-plastic indentation analysis. Thin Solid Films 157, 233–254 (1988)CrossRef Burnett, P.J., Rickery, D.S.: The scratch adhesion test an elastic-plastic indentation analysis. Thin Solid Films 157, 233–254 (1988)CrossRef
29.
Zurück zum Zitat Mishra, S.K., Bhattacharyya, A.S.: Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si–C–N hard thin films. Mater. Lett. 62, 398–402 (2008)CrossRef Mishra, S.K., Bhattacharyya, A.S.: Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si–C–N hard thin films. Mater. Lett. 62, 398–402 (2008)CrossRef
30.
Zurück zum Zitat Gonczy, S.T., Randall, N.: An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. In: 29th International Conference on Advance Ceramic and Composites, Cocoa beach, FL, 23–28 Jan 2005 Gonczy, S.T., Randall, N.: An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. In: 29th International Conference on Advance Ceramic and Composites, Cocoa beach, FL, 23–28 Jan 2005
31.
Zurück zum Zitat Bull, S.J., Berasetegui, E.G.: An overview of the potential of quantitative coating adhesion measurement by scratch testing. Tribol. Int. 39, 99–114 (2006) Bull, S.J., Berasetegui, E.G.: An overview of the potential of quantitative coating adhesion measurement by scratch testing. Tribol. Int. 39, 99–114 (2006)
32.
Zurück zum Zitat Ashrafizadeh, F.: Adhesion evaluation of PVD coatings to aluminium substrate. Surf. Coat. Technol. 130, 186–194 (2000)CrossRef Ashrafizadeh, F.: Adhesion evaluation of PVD coatings to aluminium substrate. Surf. Coat. Technol. 130, 186–194 (2000)CrossRef
33.
Zurück zum Zitat Burghard, Z.: PhD-Thesis, Max-Planck Institute for Metals Research & University of Stuttgart, Germany (2004) Burghard, Z.: PhD-Thesis, Max-Planck Institute for Metals Research & University of Stuttgart, Germany (2004)
34.
Zurück zum Zitat Cook, R.F., Pharr, G.M.: Lateral cracks and microstructural effects in the indentation fracture of yttria. J. Am. Ceram. Soc. 73, 787–817 (1990)CrossRef Cook, R.F., Pharr, G.M.: Lateral cracks and microstructural effects in the indentation fracture of yttria. J. Am. Ceram. Soc. 73, 787–817 (1990)CrossRef
35.
Zurück zum Zitat Lawn, B.R.: Fracture of Brittle Solids, 2nd edn. Cambridge University Press, Cambridge (1993) (1993). Lawn, B.R.: Fracture of Brittle Solids, 2nd edn. Cambridge University Press, Cambridge (1993) (1993).
36.
Zurück zum Zitat Dieter, G.E.: Mechanical Metallurgy. McGraw Hill Book Company (UK) limited, New York (1988) Dieter, G.E.: Mechanical Metallurgy. McGraw Hill Book Company (UK) limited, New York (1988)
37.
Zurück zum Zitat Kumar, P.: Elements of Fracture Mechanics, 1st edn. A.H. Wheeler & Co. Ltd., Allahabad (1999) Kumar, P.: Elements of Fracture Mechanics, 1st edn. A.H. Wheeler & Co. Ltd., Allahabad (1999)
38.
Zurück zum Zitat Krueger, R., O’Brien, T.K.: A shell/3D modeling technique for the analysis of delaminated composite laminates. Comp. Part A: Appl. Sci. Manuf. 32, 25–44 (2001)CrossRef Krueger, R., O’Brien, T.K.: A shell/3D modeling technique for the analysis of delaminated composite laminates. Comp. Part A: Appl. Sci. Manuf. 32, 25–44 (2001)CrossRef
39.
Zurück zum Zitat Davies, P.: Round Robin analysis of G\(_{Ic}\) interlaminar fracture test. Appl. Comp. Mater. 3, 135–140 (1996) Davies, P.: Round Robin analysis of G\(_{Ic}\) interlaminar fracture test. Appl. Comp. Mater. 3, 135–140 (1996)
41.
Zurück zum Zitat Zhou, Y., Probst, D., Thissen, A., Kroke, E., Riedel, R., Hauser, R., Hoche, H., Broszeit, E., Kroll, P., Stafast, H.: Hard silicon carbonitride films obtained by RF-plasma enhanced chemical vapour deposition using the single source precursor bis(trimethylsilyl)-carbodiimide. J. Eur. Ceram. Soc. 26, 1325–1335 (2006)CrossRef Zhou, Y., Probst, D., Thissen, A., Kroke, E., Riedel, R., Hauser, R., Hoche, H., Broszeit, E., Kroll, P., Stafast, H.: Hard silicon carbonitride films obtained by RF-plasma enhanced chemical vapour deposition using the single source precursor bis(trimethylsilyl)-carbodiimide. J. Eur. Ceram. Soc. 26, 1325–1335 (2006)CrossRef
42.
Zurück zum Zitat Probst, D., Hoche, H., Zhou, Y.Y., Hausier, R., Stelzner, T., Scheerer, H., Brotzeit, E., Berger, C., Riedel, R., Stafast, H., Koke, E.: Development of PECVD Si/C/N:H films for tribological and corrosive complex load conditions. Surf. Coat. Technol. 200, 355–359 (2005) Probst, D., Hoche, H., Zhou, Y.Y., Hausier, R., Stelzner, T., Scheerer, H., Brotzeit, E., Berger, C., Riedel, R., Stafast, H., Koke, E.: Development of PECVD Si/C/N:H films for tribological and corrosive complex load conditions. Surf. Coat. Technol. 200, 355–359 (2005)
43.
Zurück zum Zitat Bushan, B., Gupta, B.K.: Handbook of Tribology (Materials Coating and Surface Treatments). pp. 15.45–15.58. ISBN: 0-07-005249-2 Bushan, B., Gupta, B.K.: Handbook of Tribology (Materials Coating and Surface Treatments). pp. 15.45–15.58. ISBN: 0-07-005249-2
44.
Zurück zum Zitat Mehrotra, P.K., Quinto, D.T.: Techniques for evaluating mechanical 236 properties of hard coatings. J. Vac. Sci. Technol. A 3(6), 237, 2401–2405 (1985) Mehrotra, P.K., Quinto, D.T.: Techniques for evaluating mechanical 236 properties of hard coatings. J. Vac. Sci. Technol. A 3(6), 237, 2401–2405 (1985)
45.
Zurück zum Zitat Perry, A.J.: The adhesion of chemically vapour deposited hard coatings to steel—the scratch test. Thin Solid Films 78, 77–93 (1981)CrossRef Perry, A.J.: The adhesion of chemically vapour deposited hard coatings to steel—the scratch test. Thin Solid Films 78, 77–93 (1981)CrossRef
46.
Zurück zum Zitat Steinmann, P.A., Hintermann, H.E.: Adhesion of TiC and TiCN coatings on steel. J Vac. Sci Technol. A 3, 2394–400 (1985) Steinmann, P.A., Hintermann, H.E.: Adhesion of TiC and TiCN coatings on steel. J Vac. Sci Technol. A 3, 2394–400 (1985)
47.
Zurück zum Zitat Valli, J.: A review of adhesion test methods for thin hard coatings. J. Vac. Sci. Technol. A 4, 3001–3014 (1986) Valli, J.: A review of adhesion test methods for thin hard coatings. J. Vac. Sci. Technol. A 4, 3001–3014 (1986)
48.
Zurück zum Zitat Mittal, K.L.: Adhesion Measurement of Films and Coatings, pp. 1–13. The Netherlands: VSP, Utrecht (1995) Mittal, K.L.: Adhesion Measurement of Films and Coatings, pp. 1–13. The Netherlands: VSP, Utrecht (1995)
49.
Zurück zum Zitat Bhushan, B.: Handbook of Micro/Nanotribology, 2nd edn. CRC Press, Boca Raton (1999) Bhushan, B.: Handbook of Micro/Nanotribology, 2nd edn. CRC Press, Boca Raton (1999)
50.
Zurück zum Zitat Huang, L.Y., Zhao, J.W., Xu, K.W., Lu, J.: Analysis of nano-scratchbehavior of diamond-like carbon films. Surf. Coat. Tech. 154, 232–236 (2002)CrossRef Huang, L.Y., Zhao, J.W., Xu, K.W., Lu, J.: Analysis of nano-scratchbehavior of diamond-like carbon films. Surf. Coat. Tech. 154, 232–236 (2002)CrossRef
Metadaten
Titel
Adhesion and Indentation Fracture Behavior of Silicon Carbonitride Nanocomposite Coatings Deposited by Magnetron Sputtering
verfasst von
S. K. Mishra
A. S. Bhattacharyya
Copyright-Jahr
2013
Verlag
Springer New York
DOI
https://doi.org/10.1007/978-1-4614-8169-0_10

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.