Skip to main content
Erschienen in: Forschung im Ingenieurwesen 2-3/2017

01.09.2017 | Originalarbeiten/Originals

Alternative microstructures and their influence on mechanical properties of case-hardened gears

verfasst von: Christian Güntner, Thomas Tobie, Karsten Stahl

Erschienen in: Forschung im Ingenieurwesen | Ausgabe 2-3/2017

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Case hardening is one of the most common heat treatment processes for highly loaded shafts and gears. Due to numerous investigations, a microstructure consisting of martensite with retained austenite (less than 30%) represents a high sustainable microstructure.
Besides this, there are some alternative microstructures compared to the commonly specified martensitic layer. The central question is how they influence the load carrying capacity of gears. A former research project was focused on the mechanical properties of carbonitrided parts by varying the amount of retained austenite. The investigations revealed that a microstructure containing a significantly increased amount of retained austenite can increase the flank load carrying capacity in comparison to standard case carburized gears. The tooth root bending strength was not influenced in a negative way.
A microstructure containing an increased amount of retained austenite can also be reached by gas carburizing. Furthermore, a variant containing bainite in the case hardened layer was adjusted. In an actual research project, the influence on the load carrying capacity of gears made out of the material 20MnCr5 was investigated in experimental test-runs, using spur gears. The results of the variants with alternative microstructure show some differences, e. g. in the hardness profiles, compared to results of standard case hardened gears. In comparison to the case hardened reference, the flank load capacity of the gears with the alternative microstructures showed increased flank load capacity numbers, whereas the tooth root bending fatigue was not influenced in a negative way.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat AGMA (1994) Fundamental rating factors and Caculation methods for involute spur and helical gear teeth. ANSI/AGMA 2101-C95. AGMA, Alexandria (2101-C95) AGMA (1994) Fundamental rating factors and Caculation methods for involute spur and helical gear teeth. ANSI/AGMA 2101-C95. AGMA, Alexandria (2101-C95)
2.
Zurück zum Zitat Bhadeshia HKDH (2007) The nature, mechanism and properties of strong bainite. Proceedings of the 1st International Symposium on Steel Science. vol. 2007. The Iron and Steel Institute of Japan Bhadeshia HKDH (2007) The nature, mechanism and properties of strong bainite. Proceedings of the 1st International Symposium on Steel Science. vol. 2007. The Iron and Steel Institute of Japan
3.
Zurück zum Zitat Dong J, Vetters H, Hofmann F, Zoch HW (2009) Microstructure and fatigue strength of the bearing steel 52100 after shortened bainitic treatment. J ASTM Int 7(2):1–10. doi:10.1520/JAI102511 Dong J, Vetters H, Hofmann F, Zoch HW (2009) Microstructure and fatigue strength of the bearing steel 52100 after shortened bainitic treatment. J ASTM Int 7(2):1–10. doi:10.​1520/​JAI102511
4.
Zurück zum Zitat Laukotka EM (2007) Referenzölkatalog. FVA-Heft-Nr. 660, Frankfurt am Main Laukotka EM (2007) Referenzölkatalog. FVA-Heft-Nr. 660, Frankfurt am Main
5.
Zurück zum Zitat Güntner C, Saddei P, Tobie T et al (2017) Alternative mehrphasige Randschichtgefüge beim Einsatzhärten zur Steigerung der Festigkeitseigenschaften von verzahnten Bauteilen. Abschlussbericht, IGF-Nr. 17903. AiF Arbeitsgemeinschaft industrieller Forschungsvereinigunge AiF, Köln Güntner C, Saddei P, Tobie T et al (2017) Alternative mehrphasige Randschichtgefüge beim Einsatzhärten zur Steigerung der Festigkeitseigenschaften von verzahnten Bauteilen. Abschlussbericht, IGF-Nr. 17903. AiF Arbeitsgemeinschaft industrieller Forschungsvereinigunge AiF, Köln
6.
Zurück zum Zitat ISO 6336:2016 (2016) Calculation of load capacity of spur and helical gears – Part 5: Strength and quality of materials ISO 6336:2016 (2016) Calculation of load capacity of spur and helical gears – Part 5: Strength and quality of materials
7.
Zurück zum Zitat Koller P, Schwienbacher S, Tobie T et al (2011) Flank – load – carrying capacity of case hardened gears with grinding burn. IDETC 2011 : ASME 2011 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Washington DC. Koller P, Schwienbacher S, Tobie T et al (2011) Flank – load – carrying capacity of case hardened gears with grinding burn. IDETC 2011 : ASME 2011 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Washington DC.
8.
Zurück zum Zitat Lombardo S, Steinbacher M, Tobie T et al (2011) Carbonitrieren von verzahnten Getriebebauteilen. Abschlussbericht, Forschungsheft Nr. 970. Forschungsvereinigung Antriebstechnik e. V., Frankfurt am Main ((AVIF A 235)) Lombardo S, Steinbacher M, Tobie T et al (2011) Carbonitrieren von verzahnten Getriebebauteilen. Abschlussbericht, Forschungsheft Nr. 970. Forschungsvereinigung Antriebstechnik e. V., Frankfurt am Main ((AVIF A 235))
9.
Zurück zum Zitat Sauter J, Schmidt I, Schulz M (1990) Einflussgrößen auf die Leistungsfähigkeit einsatzgehärteter Zahnräder. Härterei Tech Mitt 45:98–104 Sauter J, Schmidt I, Schulz M (1990) Einflussgrößen auf die Leistungsfähigkeit einsatzgehärteter Zahnräder. Härterei Tech Mitt 45:98–104
10.
Zurück zum Zitat Tobie T, Oster P, Höhn B‑R (2001) Einfluss der Einsatzhärtungstiefe auf die Grübchen- und Zahnfußtragfähigkeit großer Zahnräder. Abschlussbericht, Forschungsvorhaben Nr. 271, Forschungsheft Nr. 622. Forschungsvereinigung Antriebstechnik e. V., Frankfurt am Main (IGF-Nr. 9880) Tobie T, Oster P, Höhn B‑R (2001) Einfluss der Einsatzhärtungstiefe auf die Grübchen- und Zahnfußtragfähigkeit großer Zahnräder. Abschlussbericht, Forschungsvorhaben Nr. 271, Forschungsheft Nr. 622. Forschungsvereinigung Antriebstechnik e. V., Frankfurt am Main (IGF-Nr. 9880)
11.
Zurück zum Zitat Tobie T, Oster P, Höhn B‑R (2003) Systematic investigation on the influence of case depth on the pitting and bending strength of case carburized gears. DETC 03, ASME, Design Engineering Technical Conference and Computers and Information in Engineering Conference, Chicago, pp 1–9 (Conference paper) Tobie T, Oster P, Höhn B‑R (2003) Systematic investigation on the influence of case depth on the pitting and bending strength of case carburized gears. DETC 03, ASME, Design Engineering Technical Conference and Computers and Information in Engineering Conference, Chicago, pp 1–9 (Conference paper)
12.
Metadaten
Titel
Alternative microstructures and their influence on mechanical properties of case-hardened gears
verfasst von
Christian Güntner
Thomas Tobie
Karsten Stahl
Publikationsdatum
01.09.2017
Verlag
Springer Berlin Heidelberg
Erschienen in
Forschung im Ingenieurwesen / Ausgabe 2-3/2017
Print ISSN: 0015-7899
Elektronische ISSN: 1434-0860
DOI
https://doi.org/10.1007/s10010-017-0222-4

Weitere Artikel der Ausgabe 2-3/2017

Forschung im Ingenieurwesen 2-3/2017 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.