nach oben

Journal of Sol-Gel Science and Technology

Erschienen in:

26.04.2019 | Original Paper:Sol-gel and hybrid materials with surface modification for applications

Amine functionalized mesoporous hybrid materials: influence of KCl and xylene on the textural characteristics and CO₂ sorption

verfasst von: Nina Velikova, Ivanka Spassova

Erschienen in: Journal of Sol-Gel Science and Technology | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Amine-functionalized mesoporous silica materials were prepared by sol–gel method in the system tetraethylortosilicate: bis[(3- trimethoxysilyl)propyl]amine (TEOS: BTPA). The hybrid amine functionalized silica materials were synthesized by co-condensation reaction between TEOS and BTPA precursors in acidic media. Soft template approach for pore formation was applied and as a structural directing agent was used surfactant Pluronic P123. For improving of pore ordering and textural characteristics xylene and KCl were used and their influence on the structural and morphological characteristics was investigated by FTIR, ¹³C CP MAS NMR, ²⁹Si MAS NMR, BET, PSD and XRD techniques. CO₂ adsorption properties of the synthesized amine functionalized hybrid materials were investigated. The simultaneous presence of xylene and KCl leads to improvement of the pore ordering, increasing of the textural characteristics values and formation of cylindrical pores. The determined heats of CO₂ adsorption evidenced chemisorption process between CO₂ and the amine groups of the hybrid materials.

Vorheriger Artikel Application of Taguchi method to optimize the sol–gel dip-coating process of the semiconductor Cu2ZnSnS4 with good optical properties

Nächster Artikel Synthesis of aluminophosphate xerogels by non-hydrolytic sol–gel condensation of EtAlCl2 with trialkylphosphates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Feng B, Du M, Dennis TJ, Anthony K, Perumal MJ (2010) Reduction of energy requirement of CO₂ desorption by adding acid into CO₂-loaded solvent. Energy Fuels. https://doi.org/10.1021/ef900564x

Li Y (2008) Study on corrosion and material selection for desulphurization unit in refinery. Petrol Refine Eng. 38:24–27

Gargiulo N, Pepe F, Caputo D (2014) CO₂ Adsorption by functionalized nanoporous materials: a review. J Nanosci. Nanotechnol. 14:1811–1822CrossRef

Lively RP, Chance RR, Kelley BT, Deckman HW, Drese JH, Jones CW, Koros WJ (2009) Hollow Fiber adsorbents for CO₂ removal from flue gas. Ind Eng Chem Res. https://doi.org/10.1021/ie9005244

Su F, Lu C, Kuo SC, Zeng W (2010) Adsorption of CO₂ on amine-functionalized Y-type zeolites. Energy Fuels https://doi.org/10.1021/ef901077k

Sevilla M, Fuertes AB (2012) CO₂ adsorption by activated templated carbons. J Colloid Interface Sci. https://doi.org/10.1016/j.jcis.2011.09.038

Chen Z, Deng S, Wei H, Wang B, Huang J, Yu G (2013) Activated carbons and amine-modified materials for carbon dioxide capture—a review. Front Environ Sci Eng. 7:326–340. https://doi.org/10.1007/s11783-013-0510-7 CrossRef

Modak A, Nandi M, Mondal J, Bhaumik A (2012) Porphyrin based porous organic polymers: novel synthetic strategy and exceptionally high CO₂ adsorption capacity. Chem. Commun. 48:248–250. https://doi.org/10.1039/C1CC14275E CrossRef

Wei Y, Li X, Zhang R, Liu Y, Wang W, Ling Y, El-Toni AM, Zhao D (2016) Periodic mesoporous organosilica nanocubes with ultrahigh surface areas for efficient CO₂ adsorption. Sci Rep. https://doi.org/10.1038/srep20769

10.

Tang Y, Landskron K (2010) CO₂-sorption properties of organosilicas with bridging amine functionalities inside the framework. J Phys Chem C. https://doi.org/10.1021/jp9095612

11.

Comotti A, Bracco S, Valsesia P, Ferretti L, Sozzani P (2007) 2D multinuclear NMR, hyperpolarized xenon and gas storage in organosilica nanochannels with crystalline order in the walls. J Am Chem Soc. https://doi.org/10.1021/ja071348y

12.

Liu M, Lu X, Shi L, Wang F, Sun J (2017) Periodic mesoporous organosilica with a basic urea-derived framework for enhanced carbon dioxide capture and conversion under mild conditions. ChemSusChem. https://doi.org/10.1002/cssc.201600973

13.

Li B, Wen HM, Zhou W, Chen BJ (2014) Porous metal–organic frameworks for gas storage and separation: What, How, and Why? Phys Chem Lett. https://doi.org/10.1021/jz501586e

14.

Wang K, Feng D, Liu TF, Su J, Yuan S, Chen YP, Bosch M, Zou X, Zhou HC (2014) A series of highly stable mesoporous metalloporphyrin Fe-MOFs. J Am Chem Soc. https://doi.org/10.1021/ja507269n

15.

Taylor MK, Runčevski T, Oktawiec J, Gonzalez MI, Siegelman RL, Mason JA, Ye J, Brown CM, Long JR (2016) Tuning the adsorption-induced phase change in the flexible metal–organic framework Co(bdp). J Am Chem Soc. https://doi.org/10.1021/jacs.6b09155

16.

Jiang J, Furukawa H, Zhang YB, Yaghi OM (2016) High methane storage working capacity in metal–organic frameworks with acrylate links. J Am Chem Soc. https://doi.org/10.1021/jacs.6b05261

17.

Sayari A (2003) In: Yang P (ed) The chemistry of nanostructured materials, World Scientific, Singapore

18.

Sayari A, Kruk M, Jaroniec M, Moudrakovski IL (1998) New approaches to pore size engineering of mesoporous silicates. Adv Mater. https://doi.org/10.1002/(SICI)1521-4095(199811)10:16<1376::AID-ADMA1376>3.0.CO;2-B

19.

Sayari A, Yang Y, Kruk M, Jaroniec M (1999) Expanding the pore size of MCM41 silicas: use of amines as expanders in direct synthesis and postsynthesis procedures. J Phys Chem. https://doi.org/10.1021/jp984504j

20.

Nandi M, Okada K, Dutta A, Bhaumik A, Maruyama J, Derksa D, Uyama H (2012) Unprecedented CO₂ uptake over highly porous N-doped activated carbon monoliths prepared by physical activation. Chem. Commun. 48:10283–10285. https://doi.org/10.1039/c2cc35334b CrossRef

21.

Mello M, Phanon D, Silveira G, Llewellyn P, Ronconi C. (2011) Amine-modified MCM-41 mesoporous silica for carbon dioxide capture. Micropor Mesopor Mater. https://doi.org/10.1016/j.micromeso.2011.02.022

22.

Chiang YC, Hsu WL, Lin SY, Juang RS (2017) Enhanced CO₂ adsorption on activated carbon fibers grafted with nitrogen-doped carbon nanotubes. Materials https://doi.org/10.3390/ma10050511

23.

Hüsing N (2007) In: Kickelbick G (ed) Hybrid materials: synthesis, characterization, and applications, Wiley-VCH, Weinheim, Germany

24.

Harlick PJE, Sayari A (2007) Applications of pore-expanded mesoporous silica. 5. Triamine grafted material with exceptional CO₂ dynamic and equilibrium adsorption performance. Ind Eng Chem Res. https://doi.org/10.1021/ie060774+

25.

Choi S, Drese JH, Jones CW (2009) Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. ChemSusChem. https://doi.org/10.1002/cssc.200900036

26.

Hoffmann F, Froba M (2011) Vitalising porous inorganic silica networks with organic functions—PMOs and related hybrid materials. Chem. Soc. Rev. 40:608–620. https://doi.org/10.1039/c0cs00076k CrossRef

27.

Gatti G, Costenaro D, Vittoni C, Paul G, Crocella V, Mangano E, Brandani S, Bordiga S, Cossi M, Marchesea L, Bisio C (2017) CO₂ adsorption on different organo-modified SBA-15 silicas: a multidisciplinary study on the effects of basic surface groups. Phys Chem Chem Phys. https://doi.org/10.1039/c6cp08048k

28.

Esam O, Zhou G, Vasiliev A (2015) Bridged mesoporous silsesquioxanes as potential CO₂ adsorbents. J Sol Gel Sci Technol. https://doi.org/10.1007/s10971-015-3657-9

29.

Quang DV, Dindi A, Abu-Zahraр MRM (2017) One-step process using CO₂ for the preparation of amino-functionalized mesoporous silica for CO₂ capture application. ACS Sustainable Chem Eng. https://doi.org/10.1021/acssuschemeng.6b02961

30.

Vilarrasa-García E, Cecilia JA, Moya EMO, Cavalcante CL, Jr, Azevedo DCS, Rodríguez-Castellón E (2015) “Low cost” pore expanded SBA-15 functionalized with amine groups applied to CO₂ adsorption. Materials. https://doi.org/10.3390/ma8052495

31.

Ko YG, Shin SS, Choi US (2011) Primary, secondary, and tertiary amines for CO₂ capture: Designing for mesoporous CO₂ adsorbents. J Colloid Interface Sci. https://doi.org/10.1016/j.jcis.2011.03.045

32.

Canck ED, Ascoop I, Sayari A, Voort PVD (2013) Periodic mesoporous organosilicas functionalized with a wide variety of amines for CO₂ adsorption. Phys Chem Chem Phys. https://doi.org/10.1039/c3cp50393c

33.

Neimark A, Ravikovitch P (2001) Capillary condensation in MMS and pore structure characterization. Micropor Mesopor Mater. https://doi.org/10.1016/S1387-1811(01)00251-7

34.

Yasmin T, Müller K (2011) Synthesis and characterization of surface modified SBA-15 silica materials and their application in chromatography. J Chromatograph A. https://doi.org/10.1016/j.chroma.2011.07.035

35.

Wei Q, Liu L, Nie ZR, Chen HQ, Wang YL, Li QY, Zou JX (2007) Functionalization of periodic mesoporous organosilica with ureidopropyl groups by a direct synthesis method. Micropor Mesopor Mater. https://doi.org/10.1016/j.micromeso.2006.09.014

36.

Lippens BC, de Boer JH (1965) Studies on pore systems in catalysts. V. The t-method. J Catal. https://doi.org/10.1016/0021-9517(65)90307-6

37.

ALOthman ZA (2012) A review: fundamental aspects of silicate mesoporous materials. Materials. https://doi.org/10.3390/ma5122874

38.

Bui TX, Kang SY, Lee SH, Choi H (2011) Organically functionalized mesoporous SBA-15 as sorbents for removal of selected pharmaceuticals from water. J Hazard Mater. https://doi.org/10.1016/j.jhazmat.2011.07.043

39.

Zhou G, Simerly T, Golovko L, Tychinin I, Trachevsky V, Gomza Y, Vasiliev A (2012) Highly functionalized bridged silsesquioxanes. J Sol Gel Sci Technol. https://doi.org/10.1007/s10971-012-2751-5

40.

Handke M, Handke B, Kowalewska A, Jastrzebski W (2009) New polysilsesquioxane materials of ladder-like structure. J Mol Struct. 924–926:254–263. https://doi.org/10.1016/j.molstruc.2008.11.039 CrossRef

41.

Wahab MA, Kim I, Ha CS (2004), Bridged amine-functionalized mesoporous organosilica materials from 1,2-bis(triethoxysilyl)ethane and bis[(3-trimethoxysilyl)propyl]amine. J Solid State Chem. https://doi.org/10.1016/j.jssc.2004.05.062

42.

Park M, Park SS, Selvaraj M, Zhao D, Ha CS (2009) Hydrophobic mesoporous materials for immobilization of enzymes. Micropor Mesopor Mater. https://doi.org/10.1016/j.micromeso.2009.04.032

43.

Wang X, Lin KSK, Chan JCC, Cheng S (2005) Direct synthesis and catalytic applications of ordered large pore aminopropyl-functionalized SBA-15 mesoporous materials. J Phys Chem B. https://doi.org/10.1021/jp045798d

44.

Zhu F, Yang D, Zhang F, Li H (2012) Amine-bridged periodic mesoporous organosilica nanospheres as an active and reusable solid base-catalyst for water-medium and solvent-free organic reactions. J Mol Catal A Chem. https://doi.org/10.1016/j.molcata.2012.07.015

45.

Metroke T, Wang Y, van Ooij WJ, Schaefer DW (2009) Chemistry of mixtures of bis-[trimethoxysilylpropyl]amine and vinyltriacetoxysilane: an NMR analysis. J Sol Gel Sci Technol. https://doi.org/10.1007/s10971-009-1927-0

46.

Bérubé F, Kaliaguine S (2008) Calcination and thermal degradation mechanisms of triblock copolymer template in SBA-15 materials. Micropor Mesopor Mater. https://doi.org/10.1016/j.micromeso.2008.02.028

47.

Newalkar BL, Komarneni S (2001) Control over microporosity of ordered microporous−mesoporous silica SBA-15 framework under microwave-hydrothermal conditions: effect of salt addition. Chem Mater. https://doi.org/10.1021/cm0103038

48.

Alexandridis P, Holzwarth JF (1997) Differential scanning calorimetry investigation of the effect of salts on aqueous solution properties of an amphiphilic block copolymer (poloxamer). Langmuir 13:6074–6082. https://doi.org/10.1021/la9703712 CrossRef

49.

Yang B, Guo C, Chen S, Ma J, Wang J, Liang X, Zheng L, Liu H (2006) Effect of acid on the aggregation of poly(ethylene oxide)−poly(propylene oxide)−poly(ethylene oxide) block copolymers. J Phys Chem B. https://doi.org/10.1021/jp0634149

50.

Ma J, Liu Q, Chen D, Wen S, Wang T (2015) Synthesis and characterisation of pore-expanded mesoporous silica materials. Micro Nano Lett. https://doi.org/10.1049/mnl.2014.0413

51.

ruk M (2012) Access to ultralarge-pore ordered mesoporous materials through selection of surfactant/ swelling-agent micellar templates. Acc Chem Res. https://doi.org/10.1021/ar200343s.

52.

Yu L, Kanezashi M, Nagasawa H, Moriyama N, Tsuru T, Ito K (2018) Enhanced CO₂ separation performance for tertiary amine‐silica membranes via thermally induced local liberation of CH3Cl. AIChE J. https://doi.org/10.1002/aic.16040

53.

Sayari A, Belmabkhout Y (2010) Stabilization of amine-containing CO₂ adsorbents: dramatic effect of water vapor. J Am Chem Soc. https://doi.org/10.1021/ja1013773

54.

Mello MR, Phanon D, Silveira GQ, Llewellyn PL, Ronconi CM (2011) Amine-modified MCM-41 mesoporous silica for carbon dioxide capture. Micropor Mesopor Mater. https://doi.org/10.1016/j.micromeso.2011.02.022

55.

eleňák V, Badaničová M, Halamová D, Čejka J, Zukal A, Murafa N, Goerigk G (2008) Amine-modified ordered mesoporous silica: effect of pore size on carbon dioxide capture. Chem Eng Sci. https://doi.org/10.1016/j.cej.2008.07.025

56.

Hahn MW, Jelic J, Berger E, Reuter K, Jentys A, Lercher JA (2016) Role of amine functionality for CO₂ chemisorption on silica. J Phys Chem. https://doi.org/10.1021/acs.jpcb.5b10012

57.

Yu L, Kanezashi M, Nagasawa H, Tsuru TI (2018) Role of amine type in CO₂ separation performance within amine functionalized silica/organosilica membranes: a review. Appl Sci. https://doi.org/10.3390/app8071032

Titel: Amine functionalized mesoporous hybrid materials: influence of KCl and xylene on the textural characteristics and CO2 sorption
verfasst von: Nina Velikova
Ivanka Spassova
Publikationsdatum: 26.04.2019
Verlag: Springer US
Erschienen in: Journal of Sol-Gel Science and Technology / Ausgabe 2/2019
Print ISSN: 0928-0707
Elektronische ISSN: 1573-4846
DOI: https://doi.org/10.1007/s10971-019-04998-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2019

CTAB-assisted solution combustion synthesis of LiFePO4 powders

Pellet silica-based titanate adsorbents with high selectivity for strontium removal from synthetic radioactive solutions

Taguchi design applied to process parameters optimization of sol–gel anticorrosive films

Effect of the synthesis method and calcination temperature on the formation of Ni–NiO nanocomposites

Nanozeolites: synthesized, properties, applications

Application of Taguchi method to optimize the sol–gel dip-coating process of the semiconductor Cu2ZnSnS4 with good optical properties

Premium Partner

Marktübersichten