nach oben

Cellulose

Erschienen in:

09.02.2019 | Original Research

Ammonia-sensing ability of differently structured hydroxyapatite blended cellulose nanofibril composite films

verfasst von: Vijaykiran N. Narwade, Shaikh R. Anjum, Vanja Kokol, Rajendra S. Khairnar

Erschienen in: Cellulose | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Fully bio-based, flexible and lightweight nanocomposite films of different porosity/density were fabricated by integrating variable weight percentages of hydroxyapatite (HAp) nanoparticles within a matrix of cellulose nanofibrils (CNFs) using the one-directional freeze-drying technique, and utilised for study as ammonia sensors. Structural, morphological and thermal-stability characterizations of the samples were assessed by using X-ray diffraction and Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The sensing ability of the films was studied at low operating temperature (25 °C) in the presence of ambient air and 5 ppm of ammonia vapour by two probe electrodes. The results for gas sensing characteristics revealed that the amount and morphology of HAp, its distribution within the micro-porous CNF matrix, and doping on its surface, are the most important parameters which influence the gas sensing performance. It was observed that the film with integrated 5 wt% of HAp exhibited the detection limit of ammonia at a concentration as low as 5 ppm, remarkable high sensitivity (up to 575%) and fast response/recovery (210/30 s) as compared to the HAp (160%, 720/120 s) or CNF (382%, 540/160 s) samples. The designed nanocomposite sensors may be used as gas filters in technological applications using ammonia as indicators for freshness in smart and biodegradable food packaging materials or in high-tech protection clothing.

Graphical abstract

Vorheriger Artikel Conversion of laboratory paper waste into useful activated carbon: a potential supercapacitor material and a good adsorbent for organic pollutant and heavy metals

Nächster Artikel Eco-friendly cellulose–bentonite porous composite hydrogels for adsorptive removal of azo dye and soilless culture

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Anjum SR, Narwade VN, Bogle KA, Khairnar RS (2018) Graphite doped hydroxyapatite nanoceramic: selective alcohol sensor. Nano-Struct Nano-Objects. https://doi.org/10.1016/j.nanoso.2018.01.010 CrossRef

Bochenkov VE, Sergeev GB (2010) Sensitivity, selectivity, and stability of gas-sensitive metal-oxide nanostructures. Metal Oxide Nanostruct Appl 3:31–52

Chambers P, Lyons WB, Sun T, Grattan KTV (2011) Applications and optoelectronic methods of detection of ammonia. In: Predeep P (ed) Optoelectronics—devices and applications. InTech, Rijeka, Croatia, pp 189–204

Chopra S, Pham A, Gaillard J et al (2002) Carbon-nanotube-based resonant-circuit sensor for ammonia. Appl Phys Lett 80:4632–4634. https://doi.org/10.1063/1.1486481 CrossRef

Clifford PK, Tuma DT (1983) Characteristics of semiconductor gas sensor II. Transient response to temperature change. Sens Actuators 3:255–281CrossRef

Drost S (1991) Tin oxide gas sensors: an analytical comparison of gas-sensitive and non-gas-sensitive thin films. Sens Actuators B Chem 4:463–466CrossRef

Dufresne A (2013) Nanocellulose: a new ageless bionanomaterial. Mater Today 16:220–227. https://doi.org/10.1016/j.mattod.2013.06.004 CrossRef

Edwards JV, Prevost N, French A et al (2013) Nanocellulose-based biosensors: design, preparation, and activity of peptide-linked cotton cellulose nanocrystals having fluorimetric and colorimetric elastase detection sensitivity. Engineering 2013:20–28CrossRef

Fihri A, Len C, Varma RS, Solhy A (2017) Hydroxyapatite: a review of syntheses, structure and applications in heterogeneous catalysis. Coord Chem Rev 347:48–76. https://doi.org/10.1016/j.ccr.2017.06.009 CrossRef

Gautam M, Jayatissa AH (2012) Solid-state electronics ammonia gas sensing behavior of graphene surface decorated with gold nanoparticles. Solid State Electron 78:159–165. https://doi.org/10.1016/j.sse.2012.05.059 CrossRef

Gong J, Li Y, Hu Z et al (2010) Ultrasensitive NH₃ gas sensor from polyaniline nanograin enchased TiO₂ fibers. J Phys Chem 114:9970–9974CrossRef

Habibi Y (2014) Key advances in the chemical modification of nanocelluloses. Chem Soc Rev. https://doi.org/10.1039/c3cs60204d CrossRefPubMed

Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals : chemistry, self-assembly, and applications. Chem Rev 110:3479–3500CrossRefPubMed

Haron TJ (1980) United States Patent (19) 54. 96:62–66. US005485919A

Heli B, Golmohammadi H, Ajji A, Merkoçi A (2016) Modulation of population density and size of silver ammonia exposure : visual detection of volatile compounds in a piece of plasmonic nanopaper. Nanoscale. https://doi.org/10.1039/c6nr00537c CrossRefPubMed

Huang X, Hu N, Gao R et al (2012) Reduced graphene oxide-polyaniline hybrid: preparation, characterization and its applications for ammonia gas sensing. J Mater Chem 22:22488–22495. https://doi.org/10.1039/c2jm34340a CrossRef

Huixia L, Yong L, Yanni T et al (2015) Room temperature gas sensing properties of tubular hydroxyapatite. New J Chem. https://doi.org/10.1039/c4nj02352h CrossRef

Hussain G, Silvester DS (2016) Detection of sub-ppm concentrations of ammonia in an ionic liquid : enhanced current density using ‘Filled’ recessed microarrays. Anal Chem. https://doi.org/10.1021/acs.analchem.6b03824 CrossRefPubMed

Imawan C, Solzbacher F, Steffes H, Obermeier E (2000) Gas-sensing characteristics of modified-MoO₃ thin films using Ti-overlayers for NH₃ gas sensors. Sens Actuators B Chem 64:193–197CrossRef

Jiaqiang X (2005) Gas sensing properties of ZnO nanorods prepared by hydrothermal method. J Mater Sci 40:2919–2921CrossRef

Jiaqiang X, Yuping C, Daoyong C, Jianian S (2017) Hydrothermal synthesis and gas sensing characters of ZnO nanorods. Sens Actuators B Chem. https://doi.org/10.1016/j.snb.2005.03.097 CrossRef

Julkapli NM, Bagheri S (2017) Nanocellulose as a green and sustainable emerging material in energy applications : a review. Polym Adv Technol. https://doi.org/10.1002/pat.4074 CrossRef

Karunagaran B, Uthirakumar P (2007) TiO₂ thin film gas sensor for monitoring ammonia. Mater Charect 122:122. https://doi.org/10.1016/j.matchar.2006.11.007 CrossRef

Katiyar P, Patra TK, Singh JK et al (2016) Understanding adsorption behavior of silica nanoparticles over a cellulose surface in an aqueous medium. Chem Eng Sci 141:293–303. https://doi.org/10.1016/j.ces.2015.11.026 CrossRef

Khairnar RS, Anjum SR, Mahabole MP (2014) Development of CNT doped nano-HAp thick film gas sensor. Development 3:253–261

Khalil HPSA, Bhat AH, Yusra AFI (2012) Green composites from sustainable cellulose nanofibrils: a review. Carbohydr Polym 87:963–979. https://doi.org/10.1016/j.carbpol.2011.08.078 CrossRef

Kim J, Shim BS, Kim HS et al (2015) Review of nanocellulose for sustainable future materials. Int J Precis Eng Manuf Green Technol 2:197–213. https://doi.org/10.1007/s40684-015-0024-9 CrossRef

Kokol V, Bozic M (2015) Characterization and properties of homo- and heterogenously phosphorylated nanocellulose. Carbohydr Polym 125:301–313. https://doi.org/10.1016/j.carbpol.2015.02.056 CrossRefPubMed

Laghzizil A, El Herch N, Bouhaouss A et al (2001) Comparison of electrical properties between fluoroapatite and hydroxyapatite materials. J Solid State Chem 156(1):57–60. https://doi.org/10.1006/jssc.2000.8958 CrossRef

Lin N, Dufresne A (2012) Nanoscale preparation, properties and applications of polysaccharide nanocrystals in advanced functional nanomaterials: a review. Nanoscale 4:3274–3294. https://doi.org/10.1039/c2nr30260h CrossRefPubMed

Llobet E (2013) Gas sensors using carbon nanomaterials: a review. Sens Actuators B Chem 179:32–45. https://doi.org/10.1016/j.snb.2012.11.014 CrossRef

Maneerung T, Tokura S, Rujiravanit R (2007) Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing. Carbohyd Polym 72(1):43–51. https://doi.org/10.1016/j.carbpol.2007.07.025 CrossRef

Mene RU, Mahabole MP, Khairnar RS (2011a) Surface modified hydroxyapatite thick films for CO₂ gas sensing application: effect of swift heavy ion irradiation. Radiat Phys Chem 80:682–687. https://doi.org/10.1016/j.radphyschem.2011.02.002 CrossRef

Mene RU, Mahabole MP, Sharma R, Khairnar RS (2011b) Enhancement in CO gas sensing properties of hydroxyapatite thick films: effect of swift heavy ion irradiation. Vacuum 86:66–71. https://doi.org/10.1016/j.vacuum.2011.04.015 CrossRef

Mene RU, Mahabole MP, Mohite KC, Khairnar RS (2013) Fe doped hydroxyapatite thick films modified via swift heavy ion irradiation for CO and CO₂ gas sensing application. J Alloys Compd. https://doi.org/10.1016/j.jallcom.2013.09.111 CrossRef

Mirzaei A, Neri G (2016) Microwave-assisted synthesis of metal oxide nanostructures for gas sensing application : a review. Sensors Actuators B Chem. https://doi.org/10.1016/j.snb.2016.06.114 CrossRef

Moon RJ, Martini A, Nairn J et al (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994. https://doi.org/10.1039/C0CS00108B CrossRefPubMed

Morales-narváez E, Golmohammadi H, Naghdi T et al (2015) Nanopaper as an optical sensing platform. ACS Nano 9(7):7296–7305. https://doi.org/10.1021/acsnano.5b03097 CrossRefPubMed

Mossalamy EH, Harbi LM, Obaid AY (2013) Chemical treatment, characterization and electrical properties of utilization biowaste hydroxyapatite nanocrystalline. Orient J Chem 29:113–120CrossRef

Mun S, Chen Y, Kim J (2012) Chemical cellulose—titanium dioxide—multiwalled carbon nanotube hybrid nanocomposite and its ammonia gas sensing properties at room temperature. Sensors Actuators B Chem 171–172:1186–1191. https://doi.org/10.1016/j.snb.2012.06.066 CrossRef

Naghdi T, Merkoc A (2017) Nanocellulose in sensing and biosensing. Chem Mater 29(13):5426–5446. https://doi.org/10.1021/acs.chemmater.7b01170 CrossRef

Nanomaterials G, Klemm D, Klemm D et al (2011) Reviews nanocelluloses : a new family of nature-based materials. Angewandte 50:5438–5466. https://doi.org/10.1002/anie.201001273 CrossRef

Nanto H, Minami T, Takata S et al (1986) Zinc oxide thin film ammonia gas sensors with high sensitivity and excellent selectivity. J Appl Phys 60:482. https://doi.org/10.1063/1.337435 CrossRef

Narwade VN, Khairnar RS (2017) Cobalt adsorption on the nano-hydroxyapatite matrix : isotherm and kinetic studies. Bull Pol Acad Sci Tech Sci 65(2):131–137. https://doi.org/10.1515/bpasts-2017-0016 CrossRef

Narwade VN, Khairnar RS, Kokol V (2018) In situ synthesized hydroxyapatite—cellulose nanofibrils as biosorbents for heavy metal ions removal. J Polym Environ 26:2130. https://doi.org/10.1007/s10924-017-1101-7 CrossRef

Nguyen ST, Feng J, Ng SK et al (2014) Advanced thermal insulation and absorption properties of recycled cellulose aerogels. Colloids Surf A Physicochem Eng Asp 445:128–134. https://doi.org/10.1016/j.colsurfa.2014.01.015 CrossRef

Olthuis W, Van Den Berg A (2005) Ammonia sensors and their applications—a review. Sens Actuators B Chem 107(2):666–677. https://doi.org/10.1016/j.snb.2004.11.054 CrossRef

Pacquit A, Frisby J, Diamond D et al (2007) Development of a smart packaging for the monitoring of fish spoilage. Food Chem 102:466–470. https://doi.org/10.1016/j.foodchem.2006.05.052 CrossRef

Pawar SG, Patil SL, Chougule MA et al (2011) New method for fabrication of CSA doped PANi-TiO₂ thin-film ammonia sensor. IEEE Sens J 11(11):2980–2985. https://doi.org/10.1109/JSEN.2011.2152391 CrossRef

Rao GST, Rao DT (1999) Gas sensitivity of ZnO based thick film sensor to NH₃ at room temperature. Sens Actuators B Chem 55:166–169CrossRef

Sberveglieri G (1995) Recent developments in semiconducting thin-film gas sensors. Sens Actuators B 23:103–109CrossRef

Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794CrossRef

Sharifi S, Behzadi S, Laurent S, Forrest ML (2012) Toxicity of nanomaterials. Chem Soc Rev 41:2323–2343. https://doi.org/10.1039/c1cs15188f CrossRefPubMed

Shingaya Y, Kubo H, Ito M (1999) Coadsorption of ammonia and electrolyte anions on a Pt (111) electrode. Surf Sci 428:173–178CrossRef

Sofla MRK, Brown RJ, Tsuzuki T, Rainey TJ (2016) A comparison of cellulose nanocrystals and cellulose nanofibres extracted from bagasse using acid and ball milling methods. Adv Nat Sci Nanosci Nanotechnol 7(3):035004CrossRef

Soni B, Hassan EB, Mahmoud B (2015) Ac ce pt e us cr t. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2015.08.031 CrossRefPubMed

Sun Z, Liu L, Zhang L, Jia D (2006) Rapid synthesis of ZnO nano-rods by reaction and their gas-sensing properties. Nanotechnology 17:2266–2270. https://doi.org/10.1088/0957-4484/17/9/032 CrossRef

Tang H, Yan M, Zhang H et al (2006) A selective NH₃ gas sensor based on Fe₂O₃–ZnO nanocomposites at room temperature. Sens Actuators B Chem 114:910–915. https://doi.org/10.1016/j.snb.2005.08.010 CrossRef

Tank KP, Sharma P, Kanchan DK, Joshi MJ (2011) FTIR, powder XRD, TEM and dielectric studies of pure and zinc doped nano-hydroxyapatite. Cryst Res Technol 1316:1309–1316. https://doi.org/10.1002/crat.201100080 CrossRef

Van Hieu N, Thi L, Thuy B, Duc N (2008) Highly sensitive thin film NH₃ gas sensor operating at room temperature based on SnO₂/MWCNTs composite. Sens Actuators B Chem 129:888–895. https://doi.org/10.1016/j.snb.2007.09.088 CrossRef

Van Rie J, Thielemans W (2017) Cellulose–gold nanoparticle hybrid materials. Nanoscale 9:8525–8554. https://doi.org/10.1039/c7nr00400a CrossRefPubMed

Van Tuan C, Anh M, Van Hieu N, Trung T (2012) Electrochemical synthesis of polyaniline nanowires on Pt interdigitated microelectrode for room temperature NH 3 gas sensor application. Curr Appl Phys 12:1011–1016. https://doi.org/10.1016/j.cap.2011.12.006 CrossRef

Wang SG, Zhang Q, Yang DJ et al (2004) Multi-walled carbon nanotube-based gas sensors for NH 3 detection. Diam Related Mater 13(4-8):1327–1332. https://doi.org/10.1016/j.diamond.2003.11.070 CrossRef

Wang JX, Sun XW, Yang Y et al (2011) Free-standing ZnO–CuO composite nanowire array films and their gas sensing. Nanotechnology 22:325704. https://doi.org/10.1088/0957-4484/22/32/325704 CrossRefPubMed

Xiang Q, Meng G, Zhang Y et al (2010) Ag nanoparticle embedded-ZnO nanorods synthesized via a photochemical method and its gas-sensing properties. Sens Actuators B Chem 143:635–640. https://doi.org/10.1016/j.snb.2009.10.007 CrossRef

Xu K, Fu C, Gao Z et al (2017) Nanomaterial-based gas sensors: a review. Inst Sci Technol 46(2):15–145. https://doi.org/10.1080/10739149.2017.1340896 CrossRef

Zakrzewska K (2001) Mixed oxides as gas sensors. Thin Solid Films 391(2):229–238CrossRef

Zhang J, Liu X, Wang L et al (2011) Synthesis and gas sensing properties of α-Fe₂O₃ @ ZnO core–shell nanospindles. Nanotechnology 22(18):185501. https://doi.org/10.1088/0957-4484/22/18/185501 CrossRefPubMed

Zhang Q, Liu Y, Zhang Y et al (2015) Facile and controllable synthesis of hydroxyapatite/graphene hybrid materials with enhanced sensing performance towards ammonia. Analyst 140:5235–5242. https://doi.org/10.1039/c5an00622h CrossRefPubMed

Titel: Ammonia-sensing ability of differently structured hydroxyapatite blended cellulose nanofibril composite films
verfasst von: Vijaykiran N. Narwade
Shaikh R. Anjum
Vanja Kokol
Rajendra S. Khairnar
Publikationsdatum: 09.02.2019
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 5/2019
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-019-02299-y

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 5/2019

Polyethylenimine grafted H2O2-oxidized cellulose membrane as a novel biosorbent for Cr(VI) adsorption and detoxification from aqueous solution

Terahertz complex conductivity of nanofibrillar cellulose-PEDOT:PSS composite films

The mechanism of alkyl ketene dimer (AKD) sizing on cellulose model films studied by sum frequency generation vibrational spectroscopy

Fabrication of pillar[5]arene-polymer-functionalized cotton fibers as adsorbents for adsorption of organic pollutants in water and volatile organic compounds in air

Preparation of nanofibrillated cellulose and nanocrystalline cellulose from surgical cotton and cellulose pulp in hot-glycerol medium

Fabrication and performance characterization of the membrane from self-dispersed gelatin-coupled cellulose microgels