Skip to main content
Erschienen in: International Journal of Steel Structures 1/2021

06.01.2021

An Experimental Study on Bolt Looseness Monitoring Using Low-Cost Transfer Impedance Technique

verfasst von: Jong-Won Lee

Erschienen in: International Journal of Steel Structures | Ausgabe 1/2021

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A technique to detect the bolt looseness in steel frame using the transfer impedance technique, which is a dual piezoelectric material technique, for bolted joint structural health monitoring is experimentally studied. An expensive impedance analyzer should be used to employ the single piezoelectric material technique (SPMT) while a general function generator and a digital multimeter can be used to employ the transfer impedance technique. Therefore, the low-cost fault detection could be carried out. A steel frame consisting of high tensile bolted connections with the splice angles was made, and the preload forces of the bolts were gradually reduced and the damage tests were carried out. The damage indexes were obtained using the transfer impedance technique and it was found that the fault existence of the bolted joint could be reasonably detected and the variations of the damage indexes tend to be increased as the degree of bolt looseness increases. The estimation results were similar to the results of the SPMT using the impedance analyzer. These results support that it is possible to estimate the bolt looseness of the bolted joint based on the impedance technique at low-cost, excluding an expensive impedance analyzer. It could be used effectively for bolted joint structural health monitoring if the study on identification of fault location and severity using the transfer impedance technique is supplemented in the future.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Bhalla, S., Gupta, A., Bansal, S., & Garg, T. (2009). Ultra low-cost adaptations of electro-mechanical impedance technique for structural health monitoring. Journal of Intelligent Material Systems and Structures, 20, 991–999.CrossRef Bhalla, S., Gupta, A., Bansal, S., & Garg, T. (2009). Ultra low-cost adaptations of electro-mechanical impedance technique for structural health monitoring. Journal of Intelligent Material Systems and Structures, 20, 991–999.CrossRef
Zurück zum Zitat Dziendzikowski, M., Niedbala, P., Kurnyta, A., Kowalczyk, K., & Dragan, K. (2018). Structural health monitoring of a composite panel based on PZT sensors and a transfer impedance framework. Sensors (Basel, Switzerland), 18, 1521–1537.CrossRef Dziendzikowski, M., Niedbala, P., Kurnyta, A., Kowalczyk, K., & Dragan, K. (2018). Structural health monitoring of a composite panel based on PZT sensors and a transfer impedance framework. Sensors (Basel, Switzerland), 18, 1521–1537.CrossRef
Zurück zum Zitat Jung, H. K., Jo, H. J., Park, G., Mascarenas, D. L., & Farrar, C. R. (2014). Relative baseline features for impedance-based structural health monitoring. Journal of Intelligent Material Systems and Structures, 25, 2294–2304.CrossRef Jung, H. K., Jo, H. J., Park, G., Mascarenas, D. L., & Farrar, C. R. (2014). Relative baseline features for impedance-based structural health monitoring. Journal of Intelligent Material Systems and Structures, 25, 2294–2304.CrossRef
Zurück zum Zitat Kim, J. T., Park, J. H., Hong, D. S., & Ho, D. D. (2011). Hybrid acceleration-impedance sensor nodes on Imote2-platform for damage monitoring in steel girder connections. Smart Structures and Systems, 7, 393–416.CrossRef Kim, J. T., Park, J. H., Hong, D. S., & Ho, D. D. (2011). Hybrid acceleration-impedance sensor nodes on Imote2-platform for damage monitoring in steel girder connections. Smart Structures and Systems, 7, 393–416.CrossRef
Zurück zum Zitat Liang, C., Sun, F., & Rogers, C. A. (1996). Electro-mechanical impedance modeling of active material systems. Smart Materials and Structures, 5, 171–186.CrossRef Liang, C., Sun, F., & Rogers, C. A. (1996). Electro-mechanical impedance modeling of active material systems. Smart Materials and Structures, 5, 171–186.CrossRef
Zurück zum Zitat Min, J., Park, S., Yun, C. B., Lee, C. G., & Lee, C. (2012). Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity. Engineering Structures, 39, 210–220.CrossRef Min, J., Park, S., Yun, C. B., Lee, C. G., & Lee, C. (2012). Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity. Engineering Structures, 39, 210–220.CrossRef
Zurück zum Zitat Nguyen, T. C., Huynh, T. C., Yi, J. H., & Kim, J. T. (2017). Hybrid bolt-loosening detection in wind turbine tower structures by vibration and impedance responses. Wind and Structures, 24, 385–403.CrossRef Nguyen, T. C., Huynh, T. C., Yi, J. H., & Kim, J. T. (2017). Hybrid bolt-loosening detection in wind turbine tower structures by vibration and impedance responses. Wind and Structures, 24, 385–403.CrossRef
Zurück zum Zitat Park, G., & Inman, D. J. (2007). Structural health monitoring using piezoelectric impedance measurements. Philosophical Transactions of the Royal Society, 365. 373–392. Park, G., & Inman, D. J. (2007). Structural health monitoring using piezoelectric impedance measurements. Philosophical Transactions of the Royal Society, 365. 373–392.
Zurück zum Zitat Pavelko, I., Pavelko, V., Kuznetsov, S., & Ozolinsh, I. (2014). Bolt-joint structural health monitoring by the method of electromechanical impedance. Aircraft Engineering and Aerospace Technology: An International Journal, 86, 207–214.CrossRef Pavelko, I., Pavelko, V., Kuznetsov, S., & Ozolinsh, I. (2014). Bolt-joint structural health monitoring by the method of electromechanical impedance. Aircraft Engineering and Aerospace Technology: An International Journal, 86, 207–214.CrossRef
Zurück zum Zitat Shao, J., Wang, T., Yin, H., Yang, D., & Li, Y. (2016). Bolt looseness detection based on piezoelectric impedance frequency shift. Applied Sciences, 6, 298–308.CrossRef Shao, J., Wang, T., Yin, H., Yang, D., & Li, Y. (2016). Bolt looseness detection based on piezoelectric impedance frequency shift. Applied Sciences, 6, 298–308.CrossRef
Zurück zum Zitat Song, H., Ling, H. J., & Shon, H. (2013). Electromechanical impedance measurement from large structures using a dual piezoelectric transducer. Journal of Sound and Vibration., 332, 6580–6595.CrossRef Song, H., Ling, H. J., & Shon, H. (2013). Electromechanical impedance measurement from large structures using a dual piezoelectric transducer. Journal of Sound and Vibration., 332, 6580–6595.CrossRef
Zurück zum Zitat Tawie, P., & Lee, H. K. (2010). Piezoelectric-based non-destructive monitoring of hydration of reinforced concrete as an indicator of bond development at the steel–concrete interface. Cement and Concrete Research, 40, 1697–1703.CrossRef Tawie, P., & Lee, H. K. (2010). Piezoelectric-based non-destructive monitoring of hydration of reinforced concrete as an indicator of bond development at the steel–concrete interface. Cement and Concrete Research, 40, 1697–1703.CrossRef
Zurück zum Zitat Yin, H., Wang, T., Yang, D., Liu, S., Shao, J., & Li, Y. (2016). A smart washer for bolt looseness monitoring based on piezoelectric active sensing method. Applied Sciences, 6, 320–329.CrossRef Yin, H., Wang, T., Yang, D., Liu, S., Shao, J., & Li, Y. (2016). A smart washer for bolt looseness monitoring based on piezoelectric active sensing method. Applied Sciences, 6, 320–329.CrossRef
Metadaten
Titel
An Experimental Study on Bolt Looseness Monitoring Using Low-Cost Transfer Impedance Technique
verfasst von
Jong-Won Lee
Publikationsdatum
06.01.2021
Verlag
Korean Society of Steel Construction
Erschienen in
International Journal of Steel Structures / Ausgabe 1/2021
Print ISSN: 1598-2351
Elektronische ISSN: 2093-6311
DOI
https://doi.org/10.1007/s13296-020-00442-1

Weitere Artikel der Ausgabe 1/2021

International Journal of Steel Structures 1/2021 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.