nach oben

Journal of Materials Science: Materials in Electronics

Erschienen in:

27.07.2020

An investigation of the improvement in energy storage performance of Na_2/3Mn_1/2Fe_1/2O₂ by systematic Al-substitution

verfasst von: S. Altin, S. Altundağ, E. Altin, M. Harfouche, A. Bayri

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 17/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

We successfully fabricated Na_2/3Mn_1/2Fe_1/2−xAl_xO₂, where x = 0, 0.01, … 0.10, by a modified solid-state reaction technique. The structural properties of the Al-substituted samples were investigated by x-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy and x-ray absorption fine structure (XAFS) measurements. It was found that there were no impurity phases in the XRD patterns of the samples and they fit the P63/mmc symmetry. The Al substitution in Na_2/3Mn_1/2Fe_1/2O₂ causes a decrease in the a-lattice parameter, but the c-parameter starts to increase after a certain substitution value of Al. We suggest that a certain proportion of Al in the samples triggers the change of the spin configuration of the Fe ions, and it may cause an increase in the lattice parameters. The size of the grains was found to be less than 0.9 µm, from SEM images for all samples. The valence states of the substituted samples as well as the local structure around Fe and Mn were investigated by means of XAFS measurements. The highest capacity for the first cycle was obtained as 134.3 mAh/g for x = 0.07, and the best capacity fade was found to be 0.23 for x = 0.08 substitution. So, the highest performance of the Al-substituted cells was found when 0.08 ≥ x ≥ 0.06. The environmental temperature effects on the battery cells were determined at 10 ºC, room temperature and 50 ºC, and it was found that the temperature plays a crucial role in the Na-ion batteries.

Vorheriger Artikel Analysis of recoverable and energy loss density mediated by Ni/Cr co-doping in BiFeO3

Nächster Artikel Efficient sunlight-driven photocatalytic behavior of zinc sulfide nanorods towards Rose Bengal degradation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

N. Yabuuchi, M. Kajiyama, J. Iwatate, H. Nishikawa, S. Hitomi, R. Okuyama, R. Usui, Y. Yamada, S. Komaba, P2-type Na_x[Fe_1/2Mn_1/2]O₂ made from earth-abundant elements for rechargeable NaÂ batteries. Nat. Mater. (2012). https://doi.org/10.1038/nmat3309CrossRef

J. Xu, S.L. Chou, J.L. Wang, H.K. Liu, S.X. Dou, Layered P2-Na_0.66Fe_0.5Mn_0.5O₂ cathode material for rechargeable sodium-ion batteries. ChemElectroChem (2014). https://doi.org/10.1002/celc.201300026CrossRef

J.K. Park, G.G. Park, H.H. Kwak, S.T. Hong, J.W. Lee, Enhanced rate capability and cycle performance of titanium-substituted P2-type Na_0.67Fe_0.5Mn_0.5O₂ as a cathode for sodium-ion batteries. ACS Omega 3, 361–368 (2017). https://doi.org/10.1021/acsomega.7b01481CrossRef

S. Chu, Y. Chen, J. Wang, J. Dai, K. Liao, W. Zhou, Z. Shao, A cobalt and nickel co-modified layered P2-Na_2/3Mn_1/2Fe_1/2O₂ with excellent cycle stability for high-energy density sodium-ion batteries. J. Alloys Compd. (2019). https://doi.org/10.1016/j.jallcom.2018.10.150CrossRef

B. Mortemard de Boisse, D. Carlier, M. Guignard, C. Delmas, Structural and electrochemical characterizations of P2 and new O₃-Na_xMn_1-yFe_yO₂ phases prepared by auto-combustion synthesis for Na-ion batteries. J. Electrochem. Soc. (2013). https://doi.org/10.1149/2.032304jesCrossRef

G. Singh, J.M. López, M. Del Amo, S. Galceran, T. Pérez-Villar, Rojo, Structural evolution during sodium deintercalation/intercalation in Na_2/3[Fe_1/2Mn_1/2]O₂. J. Mater. Chem. A. (2015). https://doi.org/10.1039/c4ta06360kCrossRef

V. Duffort, E. Talaie, R. Black, L.F. Nazar, Uptake of CO₂ in Layered P2-Na_0.67Mn_0.5Fe_0.5O₂: insertion of carbonate anions. Chem. Mater (2015). https://doi.org/10.1021/acs.chemmater.5b00097CrossRef

R. Malik, D. Burch, M. Bazant, G. Ceder, Particle size dependence of the ionic diffusivity. Nano Lett. (2010). https://doi.org/10.1021/nl1023595CrossRef

M.H. Han, B. Acebedo, E. Gonzalo, P.S. Fontecoba, S. Clarke, D. Saurel, T. Rojo, Synthesis and electrochemistry study of P2- and O3-phase Na2/3Fe1/2Mn1/2O2. Electrochim. Acta. (2015). https://doi.org/10.1016/j.electacta.2015.10.003CrossRef

10.

M. Guan, J. Chen, X. Zhang, L. Yang, B. Wang, S. Zhong, Yarn-ball-shaped P2-Na_2/3Fe_1/2Mn_1/2O₂ nanofibers prepared by magnetic-assisted electrospinning method as high-performance cathode material for Na-ion batteries. Mater. Lett. (2019). https://doi.org/10.1016/j.matlet.2019.07.001CrossRef

11.

R. Viswanatha, B. Kishore, U. Bharath, N. Munichandraiah, Communication—electrochemical investigation of plate-like Na_2/3Fe_1/2Mn_1/2O₂ for sodium ion cathode. J. Electrochem. Soc. 165, A263–A265 (2018). https://doi.org/10.1149/2.0911802jesCrossRef

12.

Y. Sui, Y. Hao, X. Zhang, S. Zhong, J. Chen, J. Li, L. Wu, Spray-drying synthesis of P2-Na_2/3Fe_1/2Mn_1/2O₂ with improved electrochemical properties. Adv. Powder Technol. 31, 190–197 (2020). https://doi.org/10.1016/j.apt.2019.10.010CrossRef

13.

E. Altin, S. Altundag, S. Altin, A. Bayri, Fabrication of Cr doped Na_0.67Fe_0.5Mn_0.5O₂ compounds and investigation of their structural, electrical, magnetic and electrochemical properties. J. Mater. Sci. Mater. Electron. (2019). https://doi.org/10.1007/s10854-019-02136-9CrossRef

14.

J. Chen, S. Zhong, X. Zhang, J. Liu, S. Shi, Y. Hu, L. Wu, High performance of hexagonal plates P2- Na_2/3Fe_1/2Mn_1/2O₂ cathode material synthesized by an improved solid-state method. Mater. Lett. (2017). https://doi.org/10.1016/j.matlet.2017.05.084CrossRef

15.

Y. Bai, L. Zhao, C. Wu, H. Li, Y. Li, F. Wu, Enhanced sodium ion storage behavior of P2-Type Na_2/3Fe_1/2Mn_1/2O₂ synthesized via a chelating agent assisted route. ACS Appl. Mater. Interfaces. 8, 2857–2865 (2016). https://doi.org/10.1021/acsami.5b11848CrossRef

16.

C. Ding, T. Nohira, R. Hagiwara, Charge-discharge performance of Na_2/3Fe_1/2Mn_1/2O₂ positive electrode in an ionic liquid electrolyte at 90 °C for sodium secondary batteries. Electrochim. Acta (2017). https://doi.org/10.1016/j.electacta.2017.02.069CrossRef

17.

I. Moeez, H.G. Jung, H.D. Lim, K.Y. Chung, Presodiation strategies and their effect on electrode-electrolyte interphases for high-performance electrodes for sodium-ion batteries. ACS Appl. Mater. Interfaces. (2019). https://doi.org/10.1021/acsami.9b14381CrossRef

18.

H. Wang, R. Gao, Z. Li, L. Sun, Z. Hu, X. Liu, Different effects of Al substitution for Mn or Fe on the structure and electrochemical properties of Na_0.67Mn_0.5Fe_0.5O₂ as a sodium ion battery cathode material. Inorg. Chem. (2018). https://doi.org/10.1021/acs.inorgchem.8b00284CrossRef

19.

E. Marelli, C. Villevieille, S. Park, N. Hérault, C. Marino, Co-Free P2-Na_0.67Mn_0.6Fe_0.25Al_0.15O₂ as promising cathode material for sodium-ion batteries. ACS Appl. Energy Mater. 1, 5960–5967 (2018). https://doi.org/10.1021/acsaem.8b01015CrossRef

20.

W. Kong, H. Wang, L. Sun, C. Su, X. Liu, Understanding the synergic roles of MgO coating on the cycling and rate performance of Na0.67Mn0.5Fe0.5O2 cathode. Appl. Surf. Sci. (2019). https://doi.org/10.1016/j.apsusc.2019.143814CrossRef

21.

B.H. Toby, EXPGUI, a graphical user interface for GSAS. J. Appl. Crystallogr. (2001). https://doi.org/10.1107/S0021889801002242CrossRef

22.

B.H. Toby, R.B. Von Dreele, The genesis of a modern open-source all purpose crystallography software package. J. Appl. Crystallogr. 46, 544–549 (2013). https://doi.org/10.1107/S0021889813003531CrossRef

23.

K. Kubota, S. Komaba, Review—practical issues and future perspective for Na-Ion batteries. J. Electrochem. Soc. (2015). https://doi.org/10.1149/2.0151514jesCrossRef

24.

H. Su, S. Jaffer, H. Yu, Transition metal oxides for sodium-ion batteries. Energy Storage Mater. (2016). https://doi.org/10.1016/j.ensm.2016.06.005CrossRef

25.

R. Zhang, Y. Cui, W. Fan, G. He, X. Liu, Ambient stable Na0.76Mn0.48Ti0.44O2 as anode for Na-ion battery. Electrochim. Acta (2019). https://doi.org/10.1016/j.electacta.2018.10.126CrossRef

26.

M. Augustin, D. Fenske, I. Bardenhagen, A. Westphal, M. Knipper, T. Plaggenborg, J. Kolny-Olesiak, J. Parisi, Manganese oxide phases and morphologies: a study on calcination temperature and atmospheric dependence. Beilstein J. Nanotechnol. (2015). https://doi.org/10.3762/bjnano.6.6CrossRef

27.

R.D. Shannon, Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallogr. Sect. A. (1976). https://doi.org/10.1107/S0567739476001551CrossRef

28.

M.A.C. Nascimento, The nature of the chemical bond. J. Braz. Chem. Soc. (2008). https://doi.org/10.1590/S0103-50532008000200007CrossRef

29.

L.H. Ahrens, The use of ionization potentials Part 1. Ionic radii of the elements. Geochim. Cosmochim. Acta (1952). https://doi.org/10.1016/0016-7037(52)90004-5CrossRef

30.

F. Ahangaran, A. Hassanzadeh, S. Nouri, Surface modification of Fe₃O₄@SiO₂ microsphere by silane coupling agent. Int. Nano Lett (2013). https://doi.org/10.1186/2228-5326-3-23CrossRef

31.

M. Dimitrakopoulou, X. Huang, J. Kröhnert, D. Teschner, S. Praetz, C. Schlesiger, W. Malzer, C. Janke, E. Schwab, F. Rosowski, H. Kaiser, S. Schunk, R. Schlögl, A. Trunschke, Insights into structure and dynamics of (Mn, Fe)O: X-promoted Rh nanoparticles. Faraday Discuss. (2018). https://doi.org/10.1039/c7fd00215gCrossRef

32.

J. Liang, D. Wei, Q. Cheng, Y. Zhu, X. Li, L. Fan, J. Zhang, Y. Qian, Cycling of Fe₂O₃ nanorice as an anode throughelectrochemical porousness and the solid–electrolyteinterphase thermolysis approach. ChemPlusChem 79, 143–150143 (2014)CrossRef

33.

L. Ren, H. Qiu, W. Qin, M. Zhang, Y. Li, P. Wei, Inhibition mechanism of Ca2+, Mg2+ and Fe3+ in finecassiterite flotation usingoctanohydroxamic acid. R. Soc. open sci 5, 180158 (2018)CrossRef

34.

A. Yuan, X. Wang, Y. Wang, J. Hu, Textural and capacitive characteristics of MnO2 nanocrystals derivedfrom a novel solid-reaction route. Electrochim. Acta 54, 1021–1026 (2009)CrossRef

35.

V.T. Le, T.M. Pham, V.D. Doan, O.E. Lebedeva, H.T. Nguyen, Removal of Pb (ii) ions from aqueous solution using a novel composite adsorbent of Fe3O4/PVA/spent coffee grounds. Sep. Sci. Technol. 54(18), 3070–3081 (2019)CrossRef

36.

V.G.P. Ribeiro, A.C.H. Barreto, J.C. Denardin, G. Mele, L. Carbone, S.E. Mazzetto, E.M.B. Sousa, P.B.A. Fechine, Magnetic nanoparticles coated with anacardic acid derived from cashew nut shell liquid. J. Mater. Sci. 48, 7875–7882 (2013)CrossRef

37.

C.M. Julien, M. Massot, Vibrational Spectroscopy Of Electrode Materials For Rechargeable Lithium Batteries Iii. Oxide Frameworks. In: Proceedings of the International Workshop “Advanced Techniques for Energy Sources Investigation and Testing” 4–9 Sept. (2004), Sofia, Bulgaria

38.

C. Liu, K. Shih, Y. Gao, F. Li, L. Wei, Dechlorinating transformation of propachlor through nucleophilic substitution by dithionite on the surface of alumina. J. Soils Sediments (2012). https://doi.org/10.1007/s11368-012-0506-0CrossRef

39.

M.D. Abràmoff, P.J. Magalhães, S.J. Ram, Image processing with imageJ. Biophotonics Int (2004). https://doi.org/10.1201/9781420005615.ax4CrossRef

40.

T.J. Collins, ImageJ for microscopy, Biotechniques. (2007). https://doi.org/10.2144/000112517

41.

C.A. Schneider, W.S. Rasband, K.W. Eliceiri, NIH Image to ImageJ: 25 years of image analysis. Nat. Methods. (2012). https://doi.org/10.1038/nmeth.2089CrossRef

42.

E. Talaie, V. Duffort, H.L. Smith, B. Fultz, L.F. Nazar, Structure of the high voltage phase of layered P2-Na_2/3-z[Mn_1/2Fe_1/2]O₂ and the positive effect of Ni substitution on its stability. Energy Environ. Sci. (2015). https://doi.org/10.1039/c5ee01365hCrossRef

43.

R. Zhan, L. Hu, H. Han, C. Dai, J. Jiang, M. Xu, Exploration of Mn_0.5Ti₂(PO₄)₃@rgo composite as anode electrode for Na-ion battery. J. Mater. Sci. Mater. Elect. 29, 4250–4255 (2018). https://doi.org/10.1007/s10854-017-8370-8CrossRef

44.

C. Wang, Y. Yang, Z. Chen, C. He, J. Su, Y. Wen, A mild process for the synthesis of Na₂Ti₃O₇ as an anode material for sodium-ion batteries in deep eutectic solvent. J. Mater. Sci. Mater. Elect. 30, 8422–8427 (2019). https://doi.org/10.1007/s10854-019-01159-6CrossRef

45.

J.-H. Hong, M.-Y. Wang, Y.Y. Du, L. Deng, G. He, The role of Zn substitution in P₂-type Na_0.67Ni_0.23Zn_0.1Mn_0.67O₂ cathode for inhibiting the phase transition at high potential and dissolution of manganese at low potential. J. Mater. Sci. Mater. Elect. 30, 4006–4013 (2019). https://doi.org/10.1007/s10854-019-00687-5CrossRef

Titel: An investigation of the improvement in energy storage performance of Na2/3Mn1/2Fe1/2O2 by systematic Al-substitution
verfasst von: S. Altin
S. Altundağ
E. Altin
M. Harfouche
A. Bayri
Publikationsdatum: 27.07.2020
Verlag: Springer US
Erschienen in: Journal of Materials Science: Materials in Electronics / Ausgabe 17/2020
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI: https://doi.org/10.1007/s10854-020-04042-x

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Buchstaben, die aus einem Megaphon kommen/© MicroStockHub/Getty Images/iStock, Digitale Lieferkette/© zapp2photo / stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Sustainibility Finance/© Robert Kneschke / stock.adobe.com / Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 17/2020

Properties of borosilicate glass/Al2O3 composites with different Al2O3 concentrations for LTCC applications

A comprehensive study on Cu2SnS3 prepared by sulfurization of Cu–Sn sputtered precursor for thin-film solar cell applications

The sintering behavior and microwave dielectric properties of 0.67CaTiO3–0.33LaAlO3 ceramics sintered at medium temperatures with the additives of H3BO3–Li2CO3

Boron-doped sucrose carbons for supercapacitor electrode: artificial neural network-based modelling approach

Illumination impact on the electrical characteristics of Au/Sunset Yellow/n-Si/Au hybrid Schottky diode

Analysis of recoverable and energy loss density mediated by Ni/Cr co-doping in BiFeO3

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.