Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 5/2019

12.04.2019

An Investigation of the Wear Performance of Aged Inconel 718 Superalloy by the Fuzzy Logic Approach

verfasst von: Ali Kalyon, Osman Palavar, Dursun Özyürek

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this study, the effects of δ, γ′ and γ″ phases on the microstructure and wear behavior of Inconel 718 alloy, produced by powder metallurgy technique, were analyzed experimentally and a fuzzy logic model was developed for the weight loss prediction after the wear tests. Aging process was carried out in two stages: firstly at 720 °C for 8 h and then at 620 °C for 6-10 h. Wear tests were performed at five different sliding distances (400-2000 m) for 1 ms−1 sliding speed under 30 to 60 N loads. Weight loss prediction model was developed by using fuzzy logic method. SEM images of Inconel 718 alloy aged for 6, 8 and 10 h at 620 °C show intermetallic precipitates formed around particle boundaries. XRD examinations showed orthorhombic δ (Ni3Nb), BCT γ″ (Ni3Nb), FCC γ′ Ni3(Al,Ti) hexagonal Laves (Fe2Nb) phases formed in the structure with the same chemical composition and different crystal lattice. Accurate estimates were obtained in the developed fuzzy logic model. It was illustrated that this fuzzy logic model can be used successfully for the prediction of weight loss in wear tests of Inconel 718 alloy that was produced by powder metallurgy method.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat C.Y. Hsu, Y.Y. Lin, W.S. Lee, and S.P. Lo, Machining Characteristics of Inconel 718 Using Ultrasonic and High Temperature-Aided Cutting, J. Mater. Process. Technol., 2008, 198, p 359–365CrossRef C.Y. Hsu, Y.Y. Lin, W.S. Lee, and S.P. Lo, Machining Characteristics of Inconel 718 Using Ultrasonic and High Temperature-Aided Cutting, J. Mater. Process. Technol., 2008, 198, p 359–365CrossRef
2.
Zurück zum Zitat M. Ay, U. Çaydaş, and A. Hasçalik, Effect of Traverse Speed on Abrasive Waterjet Machining of Age Hardened Inconel 718 Nickel-Based Superalloy, Mater. Manuf. Process., 2010, 25, p 1160–1165CrossRef M. Ay, U. Çaydaş, and A. Hasçalik, Effect of Traverse Speed on Abrasive Waterjet Machining of Age Hardened Inconel 718 Nickel-Based Superalloy, Mater. Manuf. Process., 2010, 25, p 1160–1165CrossRef
3.
Zurück zum Zitat E.O. Ezugwu, Z.M. Wang, and A.R. Machado, The Machinability of Nickel-Based Alloys: A Review, J. Mater. Process. Technol., 1999, 86, p 1–16CrossRef E.O. Ezugwu, Z.M. Wang, and A.R. Machado, The Machinability of Nickel-Based Alloys: A Review, J. Mater. Process. Technol., 1999, 86, p 1–16CrossRef
4.
Zurück zum Zitat D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquère, V. Zerrouki, and J. Vigneau, A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy, Int. J. Mach. Tools Manuf., 2004, 44, p 439–456CrossRef D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquère, V. Zerrouki, and J. Vigneau, A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy, Int. J. Mach. Tools Manuf., 2004, 44, p 439–456CrossRef
5.
Zurück zum Zitat R. Rao and V. Yadava, Multi Objective Optimization of Nd:YAG Laser Cutting of Thin Superalloy Sheet Using Grey Relational Analysis with Entropy Measurement, Opt. Laser Technol., 2009, 41, p 922–930CrossRef R. Rao and V. Yadava, Multi Objective Optimization of Nd:YAG Laser Cutting of Thin Superalloy Sheet Using Grey Relational Analysis with Entropy Measurement, Opt. Laser Technol., 2009, 41, p 922–930CrossRef
6.
Zurück zum Zitat G. Ma, D. Wu, F. Niu, and H. Zou, Microstructure Evolution and Mechanical Property of Pulsed Laser Welded Ni-Based Superalloy, Opt. Lasers Eng., 2015, 72, p 39–46CrossRef G. Ma, D. Wu, F. Niu, and H. Zou, Microstructure Evolution and Mechanical Property of Pulsed Laser Welded Ni-Based Superalloy, Opt. Lasers Eng., 2015, 72, p 39–46CrossRef
7.
Zurück zum Zitat Y. Cai, C. Tian, S. Fu, G. Han, C. Cui, and Q. Zhang, Influence of γ′ Precipitates on Portevin–Le Chatelier Effect of Ni-Based Superalloys, Mater. Sci. Eng. A, 2015, 638, p 314–321CrossRef Y. Cai, C. Tian, S. Fu, G. Han, C. Cui, and Q. Zhang, Influence of γ′ Precipitates on Portevin–Le Chatelier Effect of Ni-Based Superalloys, Mater. Sci. Eng. A, 2015, 638, p 314–321CrossRef
8.
Zurück zum Zitat S. Benhadad, N.L. Richards, and M.C. Chaturvedi, The Influence of Minor Elements on the Weldability of an Inconel 718-Type Superalloy, Metall. Mater. Trans. A, 2002, 33, p 2005–2017CrossRef S. Benhadad, N.L. Richards, and M.C. Chaturvedi, The Influence of Minor Elements on the Weldability of an Inconel 718-Type Superalloy, Metall. Mater. Trans. A, 2002, 33, p 2005–2017CrossRef
9.
Zurück zum Zitat B.C. Yan, J. Zhang, and L.H. Lou, Effect of Boron Additions on the Microstructure and Transverse Properties of a Directionally Solidified Superalloy, Mater. Sci. Eng. A, 2008, 474, p 39–47CrossRef B.C. Yan, J. Zhang, and L.H. Lou, Effect of Boron Additions on the Microstructure and Transverse Properties of a Directionally Solidified Superalloy, Mater. Sci. Eng. A, 2008, 474, p 39–47CrossRef
10.
Zurück zum Zitat C.G. McKamey, C.A. Carmichael, W.D. Cao, and R.L. Kennedy, Creep Properties of Phosphorus + Boron-Modified Alloy 718, Scr. Mater., 1998, 38, p 485–491CrossRef C.G. McKamey, C.A. Carmichael, W.D. Cao, and R.L. Kennedy, Creep Properties of Phosphorus + Boron-Modified Alloy 718, Scr. Mater., 1998, 38, p 485–491CrossRef
11.
Zurück zum Zitat E. Cadel, D. Lemarchand, S. Chambreland, and D. Blavette, Atom Probe Tomography Investigation of the Microstructure of Superalloys N18, Acta Mater., 2002, 50, p 957–966CrossRef E. Cadel, D. Lemarchand, S. Chambreland, and D. Blavette, Atom Probe Tomography Investigation of the Microstructure of Superalloys N18, Acta Mater., 2002, 50, p 957–966CrossRef
12.
Zurück zum Zitat L. Xiao, D. Chen, and M.C. Chaturvedi, Effect of Boron and Carbon on the Fracture Toughness of IN 718 Superalloy at Room Temperature and 650 °C, J. Mater. Eng. Perform., 2005, 14, p 528–538CrossRef L. Xiao, D. Chen, and M.C. Chaturvedi, Effect of Boron and Carbon on the Fracture Toughness of IN 718 Superalloy at Room Temperature and 650 °C, J. Mater. Eng. Perform., 2005, 14, p 528–538CrossRef
13.
Zurück zum Zitat D. Blavette, E. Cadel, C. Pareige, B. Deconihout, and P. Caron, Phase Transformation and Segregation to Lattice Defects in Ni-Base Superalloys, Microsc. Microanal., 2007, 13, p 464–483CrossRef D. Blavette, E. Cadel, C. Pareige, B. Deconihout, and P. Caron, Phase Transformation and Segregation to Lattice Defects in Ni-Base Superalloys, Microsc. Microanal., 2007, 13, p 464–483CrossRef
14.
Zurück zum Zitat C. Slama and M. Abdellaoui, Structural Characterization of the Aged Inconel 718, J. Alloys Compd., 2000, 306, p 277–284CrossRef C. Slama and M. Abdellaoui, Structural Characterization of the Aged Inconel 718, J. Alloys Compd., 2000, 306, p 277–284CrossRef
15.
Zurück zum Zitat T. Alam, M. Chaturvedi, S.P. Ringer, and J.M. Cairney, Precipitation and Clustering in the Early Stages of Ageing in Inconel 718, Mater. Sci. Eng. A, 2010, 527, p 7770–7774CrossRef T. Alam, M. Chaturvedi, S.P. Ringer, and J.M. Cairney, Precipitation and Clustering in the Early Stages of Ageing in Inconel 718, Mater. Sci. Eng. A, 2010, 527, p 7770–7774CrossRef
16.
Zurück zum Zitat M. Saadatmand and J. Aghazadeh Mohandesi, Optimization of Mechanical and Wear Properties of Functionally Graded Al6061/SiC Nanocomposites Produced by Friction Stir Processing (FSP), Acta Metall. Sin., 2015, 28, p 584–590CrossRef M. Saadatmand and J. Aghazadeh Mohandesi, Optimization of Mechanical and Wear Properties of Functionally Graded Al6061/SiC Nanocomposites Produced by Friction Stir Processing (FSP), Acta Metall. Sin., 2015, 28, p 584–590CrossRef
17.
Zurück zum Zitat D. Özyürek and S. Tekeli, An Investigation on Wear Resistance of SiCp-Reinforced Aluminium Composites Produced by Mechanical Alloying Method, Sci. Eng. Compos. Mater., 2010, 17, p 31–38CrossRef D. Özyürek and S. Tekeli, An Investigation on Wear Resistance of SiCp-Reinforced Aluminium Composites Produced by Mechanical Alloying Method, Sci. Eng. Compos. Mater., 2010, 17, p 31–38CrossRef
18.
Zurück zum Zitat D. Özyürek and I. Ciftci, An Investigation into the Wear Behaviour of TiB2 Particle Reinforced Aluminium Composites Produced by Mechanical Alloying, Sci. Eng. Compos. Mater., 2011, 18, p 5–12CrossRef D. Özyürek and I. Ciftci, An Investigation into the Wear Behaviour of TiB2 Particle Reinforced Aluminium Composites Produced by Mechanical Alloying, Sci. Eng. Compos. Mater., 2011, 18, p 5–12CrossRef
19.
Zurück zum Zitat D. Özyürek, R. Yılmaz, and E. Kibar, The Effects of Retrogression Parameters on Hardness and Wear Behaviours of 7075 Aluminium Alloys, J. Fac. Eng. Arch. Gazi Univ., 2013, 27, p 429–438 D. Özyürek, R. Yılmaz, and E. Kibar, The Effects of Retrogression Parameters on Hardness and Wear Behaviours of 7075 Aluminium Alloys, J. Fac. Eng. Arch. Gazi Univ., 2013, 27, p 429–438
20.
Zurück zum Zitat R.L. Deuis, C. Subramanian, and J.M. Yellup, Dry Sliding Wear of Aluminium Composites—A Review, Compos. Sci. Technol., 1997, 57, p 415–435CrossRef R.L. Deuis, C. Subramanian, and J.M. Yellup, Dry Sliding Wear of Aluminium Composites—A Review, Compos. Sci. Technol., 1997, 57, p 415–435CrossRef
21.
Zurück zum Zitat A. Vencl, I. Bobić, and Z. Mišković, Effect of Thixocasting and Heat Treatment on the Tribological Properties of Hypoeutectic Al–Si Alloy, Wear, 2008, 264, p 616–623CrossRef A. Vencl, I. Bobić, and Z. Mišković, Effect of Thixocasting and Heat Treatment on the Tribological Properties of Hypoeutectic Al–Si Alloy, Wear, 2008, 264, p 616–623CrossRef
22.
Zurück zum Zitat R. Chen, A. Iwabuchi, and T. Shimizu, The Effect of a T6 Heat Treatment on the Fretting Wear of a SiC Particle-Reinforced A356 Aluminum Alloy Matrix Composite, Wear, 2000, 2382, p 110–119CrossRef R. Chen, A. Iwabuchi, and T. Shimizu, The Effect of a T6 Heat Treatment on the Fretting Wear of a SiC Particle-Reinforced A356 Aluminum Alloy Matrix Composite, Wear, 2000, 2382, p 110–119CrossRef
23.
Zurück zum Zitat S. Aksoz, O. Bican, R. Calin, and B. Bostan, Effect of T7 Heat Treatment on the Dry Sliding Friction and Wear Properties of the SiC-Reinforced AA 2014 Aluminium Matrix Composites Produced by Vacuum Infiltration, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 2013, 228, p 312–319CrossRef S. Aksoz, O. Bican, R. Calin, and B. Bostan, Effect of T7 Heat Treatment on the Dry Sliding Friction and Wear Properties of the SiC-Reinforced AA 2014 Aluminium Matrix Composites Produced by Vacuum Infiltration, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 2013, 228, p 312–319CrossRef
24.
Zurück zum Zitat H. Gökmeşe and B. Bostan, Improvements of Dry Sliding Wear Behaviour and Mechanical Properties in 2014 Al Alloy by Age-Hardening, Sci. Res. Essays, 2013, 8, p 2227–2234 H. Gökmeşe and B. Bostan, Improvements of Dry Sliding Wear Behaviour and Mechanical Properties in 2014 Al Alloy by Age-Hardening, Sci. Res. Essays, 2013, 8, p 2227–2234
25.
Zurück zum Zitat R. Çalin and N.S. Cilasun, An Investigation of Abrasive Wear Behaviour of Al 2014-SiC Composites, High Temp. Mater. Process., 2015, 34, p 131–139CrossRef R. Çalin and N.S. Cilasun, An Investigation of Abrasive Wear Behaviour of Al 2014-SiC Composites, High Temp. Mater. Process., 2015, 34, p 131–139CrossRef
26.
Zurück zum Zitat D. Özyürek, M. Yıldırım, and İ. Çiftçi, The Tribological Properties of A356-SiCp Metal-Matrix Composites Fabricated by Thixomoulding Technique, Sci. Eng. Compos. Mater., 2012, 19, p 351–356CrossRef D. Özyürek, M. Yıldırım, and İ. Çiftçi, The Tribological Properties of A356-SiCp Metal-Matrix Composites Fabricated by Thixomoulding Technique, Sci. Eng. Compos. Mater., 2012, 19, p 351–356CrossRef
27.
Zurück zum Zitat D. Özyürek, A. Kalyon, M. Yıldırım, T. Tuncay, and İ. Çiftçi, Experimental Investigation and Prediction of Wear Properties of Al/SiC Metal Matrix Composites Produced by Thixomoulding Method Using Artificial Neural Networks, Mater. Des., 2014, 63, p 270–277CrossRef D. Özyürek, A. Kalyon, M. Yıldırım, T. Tuncay, and İ. Çiftçi, Experimental Investigation and Prediction of Wear Properties of Al/SiC Metal Matrix Composites Produced by Thixomoulding Method Using Artificial Neural Networks, Mater. Des., 2014, 63, p 270–277CrossRef
28.
Zurück zum Zitat G.E. D’Errico, Fuzzy Control Systems with Application to Machining Processes, J. Mater. Process. Technol., 2001, 109, p 38–43CrossRef G.E. D’Errico, Fuzzy Control Systems with Application to Machining Processes, J. Mater. Process. Technol., 2001, 109, p 38–43CrossRef
29.
Zurück zum Zitat S. Özel, B. Yalçın, H. Turhan, and İ. Somurkıran, Fuzzy Logic Model of Wear Characteristic of Surface Alloyed with Ferromanganese Powder, J. Fac. Eng. Arch. Gazi Univ., 2008, 23, p 33–39 S. Özel, B. Yalçın, H. Turhan, and İ. Somurkıran, Fuzzy Logic Model of Wear Characteristic of Surface Alloyed with Ferromanganese Powder, J. Fac. Eng. Arch. Gazi Univ., 2008, 23, p 33–39
30.
Zurück zum Zitat S. Yaldiz, F. Unsacar, and H. Saglam, Comparison of Experimental Results Obtained by Designed Dynamometer to Fuzzy Model for Predicting Cutting Forces in Turning, Mater. Des., 2006, 27, p 1139–1147CrossRef S. Yaldiz, F. Unsacar, and H. Saglam, Comparison of Experimental Results Obtained by Designed Dynamometer to Fuzzy Model for Predicting Cutting Forces in Turning, Mater. Des., 2006, 27, p 1139–1147CrossRef
31.
Zurück zum Zitat C. Gologlu and C. Mizrak, An Integrated Fuzzy Logic Approach to Customer-Oriented Product Design, J. Eng. Des., 2011, 22, p 113–127CrossRef C. Gologlu and C. Mizrak, An Integrated Fuzzy Logic Approach to Customer-Oriented Product Design, J. Eng. Des., 2011, 22, p 113–127CrossRef
32.
Zurück zum Zitat S. Sharma, S. Tamang, D. Devarasiddappa, and M. Chandrasekran, Fuzzy Logic Modeling and Multiple Performance Optimization in Turning GFRP Composites Using Desirability Function Analysis, Procedia Mater. Sci., 2014, 6, p 1805–1814CrossRef S. Sharma, S. Tamang, D. Devarasiddappa, and M. Chandrasekran, Fuzzy Logic Modeling and Multiple Performance Optimization in Turning GFRP Composites Using Desirability Function Analysis, Procedia Mater. Sci., 2014, 6, p 1805–1814CrossRef
33.
Zurück zum Zitat P. Gao, K. Zhang, B. Zhang, S. Jiang, and B. Zhang, Microstructures and High Temperature Mechanical Properties of Electron Beam Welded Inconel 718 Superalloy Thick Plate, Trans. Nonferrous Met. Soc. China, 2011, 21, p 315–322CrossRef P. Gao, K. Zhang, B. Zhang, S. Jiang, and B. Zhang, Microstructures and High Temperature Mechanical Properties of Electron Beam Welded Inconel 718 Superalloy Thick Plate, Trans. Nonferrous Met. Soc. China, 2011, 21, p 315–322CrossRef
34.
Zurück zum Zitat T.J. Ross, Fuzzy Logic with Engineering Applications, 3rd ed., Wiley, New York, 2010CrossRef T.J. Ross, Fuzzy Logic with Engineering Applications, 3rd ed., Wiley, New York, 2010CrossRef
35.
Zurück zum Zitat M. Marani Barzani, E. Zalnezhad, A.A.D. Sarhan, S. Farahany, and S. Ramesh, Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu-Fe Die Casting Alloy Using Different Additives-Turning, Measurement, 2015, 61, p 150–161CrossRef M. Marani Barzani, E. Zalnezhad, A.A.D. Sarhan, S. Farahany, and S. Ramesh, Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu-Fe Die Casting Alloy Using Different Additives-Turning, Measurement, 2015, 61, p 150–161CrossRef
36.
Zurück zum Zitat D. Levasseur, S. Yue, and M. Brochu, Pressureless Sintering of Cold Sprayed Inconel 718 Deposit, Mater. Sci. Eng. A, 2012, 556, p 343–350CrossRef D. Levasseur, S. Yue, and M. Brochu, Pressureless Sintering of Cold Sprayed Inconel 718 Deposit, Mater. Sci. Eng. A, 2012, 556, p 343–350CrossRef
37.
Zurück zum Zitat W.L. Mankins and S. Lamb, Nickel and Nickel Alloys, 10th ed., ASM handbook, Philadelphia, 1990 W.L. Mankins and S. Lamb, Nickel and Nickel Alloys, 10th ed., ASM handbook, Philadelphia, 1990
38.
Zurück zum Zitat H. Yuan and W.C. Liu, Effect of the δ Phase on the Hot Deformation Behavior of Inconel 718, Mater. Sci. Eng. A, 2005, 408, p 281–289CrossRef H. Yuan and W.C. Liu, Effect of the δ Phase on the Hot Deformation Behavior of Inconel 718, Mater. Sci. Eng. A, 2005, 408, p 281–289CrossRef
39.
Zurück zum Zitat N. Richards and D. Aspinwall, Use of Ceramic Tools for Machining Nickel Based Alloys, Int. J. Mach. Tools Manuf, 1989, 29, p 575–588CrossRef N. Richards and D. Aspinwall, Use of Ceramic Tools for Machining Nickel Based Alloys, Int. J. Mach. Tools Manuf, 1989, 29, p 575–588CrossRef
40.
Zurück zum Zitat V. Kindrachuk, N. Wanderka, J. Banhart, D. Mukherji, D. Del Genovese, and J. Rösler, Effect of Rhenium Addition on the Microstructure of the Superalloy Inconel 706, Acta Mater., 2008, 56, p 1609–1618CrossRef V. Kindrachuk, N. Wanderka, J. Banhart, D. Mukherji, D. Del Genovese, and J. Rösler, Effect of Rhenium Addition on the Microstructure of the Superalloy Inconel 706, Acta Mater., 2008, 56, p 1609–1618CrossRef
41.
Zurück zum Zitat D. Özyürek, I. Ciftci, and T. Tuncay, The Effect of Aging and Sliding Speed on Wear Behaviour of Cu-Cr-Zr Alloy, Mater. Test., 2013, 55, p 468–471CrossRef D. Özyürek, I. Ciftci, and T. Tuncay, The Effect of Aging and Sliding Speed on Wear Behaviour of Cu-Cr-Zr Alloy, Mater. Test., 2013, 55, p 468–471CrossRef
42.
Zurück zum Zitat D. Özyürek and S. Tekeli, Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling, High Temp. Mater. Process., 2011, 30, p 175–180CrossRef D. Özyürek and S. Tekeli, Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling, High Temp. Mater. Process., 2011, 30, p 175–180CrossRef
43.
Zurück zum Zitat I. Sağlam, D. Özyürek, and K. Çetinkaya, Effect of Ageing Treatment on Wear Properties and Electrical Conductivity of Cu-Cr-Zr Alloy, Bull. Mater. Sci., 2012, 34, p 1465–1470 I. Sağlam, D. Özyürek, and K. Çetinkaya, Effect of Ageing Treatment on Wear Properties and Electrical Conductivity of Cu-Cr-Zr Alloy, Bull. Mater. Sci., 2012, 34, p 1465–1470
44.
Zurück zum Zitat S. Sawla and S. Das, Combined Effect of Reinforcement and Heat Treatment on the Two Body Abrasive Wear of Aluminum Alloy and Aluminum Particle Composites, Wear, 2004, 257, p 555–561CrossRef S. Sawla and S. Das, Combined Effect of Reinforcement and Heat Treatment on the Two Body Abrasive Wear of Aluminum Alloy and Aluminum Particle Composites, Wear, 2004, 257, p 555–561CrossRef
45.
Zurück zum Zitat D. Özyürek, T. Tansel, and D. Cihan, Wear Behaviour of Nickel-Aluminium Bronzes Produced with Mechanical Alloying, 5th Int. Adv. Technol. Symp, 2009, p 1101–1104 D. Özyürek, T. Tansel, and D. Cihan, Wear Behaviour of Nickel-Aluminium Bronzes Produced with Mechanical Alloying, 5th Int. Adv. Technol. Symp, 2009, p 1101–1104
Metadaten
Titel
An Investigation of the Wear Performance of Aged Inconel 718 Superalloy by the Fuzzy Logic Approach
verfasst von
Ali Kalyon
Osman Palavar
Dursun Özyürek
Publikationsdatum
12.04.2019
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 5/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-019-04016-z

Weitere Artikel der Ausgabe 5/2019

Journal of Materials Engineering and Performance 5/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.