nach oben

Journal of Materials Engineering and Performance

Erschienen in:

12.06.2020

An Investigation on Anisotropy Behavior and Forming Limit of 5182-H111 Aluminum Alloy

verfasst von: Zhaoxuan Hou, Zhigang Liu, Min Wan, Xiangdong Wu, Bing Yang, Xu Lu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper studies the anisotropy behavior and forming limit of 5182-H111 aluminum alloy by experiments and theoretical analysis. The uniaxial tension tests for three different sheet directions were conducted to investigate the anisotropic properties of Al5182-H111 sheet. Moreover, the Nakajima tests for both rolling and transverse directions were performed to get the forming limit data. The experimental results show that the forming limit curves (FLCs) for rolling direction are much lower than that for transverse direction. In order to further investigate the influence of anisotropic properties on FLCs, the theoretical prediction of FLC was accomplished based on three different hardening laws. The results show that the theoretical FLC with Ghosh hardening law has much better agreement with experimental data. Furthermore, a new FLC was proposed by extending the forming limit from the strain state of uniaxial tension at transverse direction to the strain state of uniaxial tension at rolling direction. The adaptability of new FLC was verified in the Drawing test and Erichsen cupping test.

Vorheriger Artikel Effects of Co on Microstructure, Mechanical Properties, and Corrosion Resistance of Ti-Nb-Zr-Co Biological Alloys

Nächster Artikel Microstructure, Tribological Behavior, and Strengthening Mechanisms of the Friction Interface Layer with Nanocrystalline Structure of Ni3Al Matrix Self-lubricating Composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J. Hirsch, Recent Development in Aluminium for Automotive Applications, Trans. Nonferrous Met. Soc. China, 2014, 24(7), p 1995–2002CrossRef

T.B. Stoughton and X. Zhu, Review of Theoretical Models of the Strain-Based FLD and Their Relevance to the Stress-Based FLD, Int. J. Plast, 2004, 20(8), p 1463–1486CrossRef

M. Darrieulat and F. Montheillet, Extension of the Hill (1948) yield criterion to the case of prismatic monoclinic symmetry, Int. J. Mech. Sci., 1996, 38(12), p 1273–1284CrossRef

G. Sainath, B.K. Choudhary, J. Christopher, E. Isaac Samuel, and M.D. Mathew, Applicability of Voce Equation for Tensile Flow and Work Hardening Behaviour of P92 Ferritic Steel, Int. J. Press. Vessels Pip., 2015, 132–133, p 1–9CrossRef

J.E. Hockett and O.D. Sherby, Large Strain Deformation of Polycrystalline Metals at Low Homologous Temperatures, J. Mech. Phys. Solids, 1975, 23(2), p 87–98CrossRef

I.Y. Straume and V.I. Prosvirin, Investigation of the Wedge Pressure (Ludwik) Method of Testing Certain Plastics, Polym. Mech., 1971, 7(2), p 330–332CrossRef

H.W. Swift, Plastic Instability Under Plane Stress, J. Mech. Phys. Solids, 1952, 1(1), p 1–18CrossRef

A.K. Ghosh, The Influence of Strain Hardening and Strain-Rate Sensitivity on Sheet Metal Forming, J. Eng. Mater. Technol., 1977, 99(3), p 264CrossRef

F. Djavanroodi, M. Ebrahimi, and M. Janbakhsh, A Study on the Stretching Potential, Anisotropy Behavior and Mechanical Properties of AA7075 and Ti-6Al-4 V Alloys Using Forming Limit Diagram: An Experimental, Numerical and Theoretical Approaches, Results Phys., 2019, 14, p 102496CrossRef

10.

J. He, Y. Li, B. Gu, and S. Li, Effects of Reverse Loading on Forming Limit Predictions with Distortional Anisotropic Hardening Under Associated and Non-associated Flow Rules, Int. J. Mech. Sci., 2019, 156, p 446–461CrossRef

11.

J. He, D. Zeng, X. Zhu, Z. Cedric Xia, and S. Li, Effect of Nonlinear Strain Paths on Forming Limits Under Isotropic and Anisotropic Hardening, Int. J. Solids Struct., 2014, 51(2), p 402–415CrossRef

12.

R. Schneider, R.J. Grant, N. Sotirov, G. Falkinger, F. Grabner, C. Reichl, M. Scheerer, B. Heine, and Z. Zouaoui, Constitutive Flow Curve Approximation of Commercial Aluminium Alloys at Low Temperatures, Mater. Des., 2015, 88, p 659–666CrossRef

13.

Z. Marciniak and K. Kuczyński, Limit Strains in the Processes of Stretch-Forming Sheet Metal, Int. J. Mech. Sci., 1967, 9(9), p 609–620CrossRef

14.

P. Hora, L. Tong, and B. Berisha, Modified Maximum Force Criterion, a Model for the Theoretical Prediction of Forming Limit Curves, Int. J. Mater. Form., 2013, 6(2), p 267–279CrossRef

15.

Y. Wang, C. Zhang, Y. Yang, S. Fan, G. Wang, G. Zhao, and L. Chen, The Integration of Through-Thickness Normal Stress and Friction Stress in the M–K Model to Improve the Accuracy of Predicted FLCs, Int. J. Plast, 2019, 120, p 147–163CrossRef

16.

B.L. Ma, M. Wan, Z.Y. Cai, W.N. Yuan, C. Li, X.D. Wu, and W. Liu, Investigation on the Forming Limits of 5754-O Aluminum Alloy Sheet with the Numerical Marciniak–Kuczynski Approach, Int. J. Mech. Sci., 2018, 142–143, p 420–431CrossRef

17.

Q. Hu, X. Li, and J. Chen, New Robust Algorithms for Marciniak–Kuczynski Model to Calculate the Forming Limit Diagrams, Int. J. Mech. Sci., 2018, 148, p 293–306CrossRef

18.

J. Lian, F. Shen, X. Jia, D.-C. Ahn, D.-C. Chae, S. Münstermann, and W. Bleck, An Evolving Non-associated Hill48 Plasticity Model Accounting for Anisotropic Hardening and r-value Evolution and Its Application to Forming Limit Prediction, Int. J. Solids Struct., 2018, 151, p 20–44CrossRef

19.

Q.-T. Pham, B.-H. Lee, K.-C. Park, and Y.-S. Kim, Influence of the Post-necking Prediction of Hardening Law on the Theoretical Forming Limit Curve of Aluminium Sheets, Int. J. Mech. Sci., 2018, 140, p 521–536CrossRef

20.

K. Jawale, J.F. Duarte, A. Reis, and M.B. Silva, Characterizing Fracture Forming Limit and Shear Fracture Forming Limit for Sheet Metals, J. Mater. Process. Technol., 2018, 255, p 886–897CrossRef

21.

J.P. Magrinho, M.B. Silva, G. Centeno, F. Moedas, C. Vallellano, and P.A.F. Martins, On the Determination of Forming Limits in Thin-Walled Tubes, Int. J. Mech. Sci., 2019, 155, p 381–391CrossRef

22.

Q. Hu, X. Li, and J. Chen, Forming Limit Evaluation by Considering Through-Thickness Normal Stress: Theory and Modeling, Int. J. Mech. Sci., 2019, 155, p 187–196CrossRef

23.

B.L. Ma, M. Wan, H. Zhang, X.L. Gong, and X.D. Wu, Evaluation of the Forming Limit Curve of Medium Steel Plate Based on Non-constant Through-Thickness Normal Stress, J. Manuf. Process., 2018, 33, p 175–183CrossRef

24.

N. Park, H. Huh, S.J. Lim, Y. Lou, Y.S. Kang, and M.H. Seo, Fracture-Based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming, Int. J. Plast, 2017, 96, p 1–35CrossRef

25.

S.B. Kim, H. Huh, H.H. Bok, and M.B. Moon, Forming Limit Diagram of Auto-Body Steel Sheets for High-Speed Sheet Metal Forming, J. Mater. Process. Technol., 2011, 211(5), p 851–862CrossRef

26.

S. Bruschi, T. Altan, D. Banabic, P.F. Bariani, A. Brosius, J. Cao, A. Ghiotti, M. Khraisheh, M. Merklein, and A.E. Tekkaya, Testing and Modelling of Material Behaviour and Formability in Sheet Metal Forming, CIRP Ann. Manuf. Technol., 2014, 63(2), p 727–749CrossRef

27.

J. Chen, P. Gong, and L. Yang, Forming Limit Evaluation for AA5182 Aluminum Alloy at Warm Temperatures Based on M–K Model, J. Mater. Eng. Perform., 2020, 29, p 1176–1184CrossRef

28.

M. Kawka and A. Makinouchi, Plastic Anisotropy in FEM Analysis Using Degenerated Solid Element, J. Mater. Process. Technol., 1996, 60(1), p 239–242CrossRef

29.

H. Kim, J.H. Sung, R. Sivakumar, and T. Altan, Evaluation of Stamping Lubricants Using the Deep Drawing Test, Int. J. Mach. Tool Manuf., 2007, 47(14), p 2120–2132CrossRef

30.

T. Sangkharat and S. Dechjarern, Using Image Processing on Erichsen Cup Test Machine to Calculate Anisotropic Property of Sheet Metal, Proc. Manuf., 2019, 29, p 390–397

31.

S. Basak, S.K. Panda, and M.-G. Lee, Formability and Fracture in Deep Drawing Sheet Metals: Extended Studies for Pre-strained Anisotropic Thin Sheets, Int. J. Mech. Sci., 2020, 170, p 105346CrossRef

Titel: An Investigation on Anisotropy Behavior and Forming Limit of 5182-H111 Aluminum Alloy
verfasst von: Zhaoxuan Hou
Zhigang Liu
Min Wan
Xiangdong Wu
Bing Yang
Xu Lu
Publikationsdatum: 12.06.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04879-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2020

Determination of the Forming-Limit Diagram from Deformations within Necking Instability: A Digital Image Correlation-Based Approach

Fatigue Crack Detection in AISI 304 Austenitic Stainless Steel Using Nonlinear and Linear Ultrasonic Testing Methods

On the Development of Parametrical Water Quenching Heat Transfer Model Using Cooling Curves by ASTM D6200 Quenchometer

Forming Features at Screw Rolling of Austenitic Stainless-Steel Billets

Computational Investigation of Interface Stresses in Duplex Structure Stainless Steels

Study on the Microstructure and Texture Evolution of Hot Forged 20CrMnTiH Steel Spur Bevel Gear by Simulation and Experiment

Premium Partner

Marktübersichten