nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

30.01.2020 | ORIGINAL ARTICLE

Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil

verfasst von: Marcelo Rodrigo Munhoz, Larissa Galante Dias, Ricardo Breganon, Fernando Sabino Fonteque Ribeiro, Janaina Fracaro de Souza Gonçalves, Elizabeth Mie Hashimoto, Carlos Elias da Silva Júnior

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 11-12/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work presents an evaluation of a new paste applied to the abrasive flow machining (AFM) process, a paste developed with oiticica oil, from the “Licânia rígida Benth,” originating from Brazil. The application of the paste with vegetable oil will be compared with results obtained by a commercial paste during the application of AFM in medium carbon steel SAE 1045 and aluminum 6061-T6 workpieces in terms of surface roughness (Ra, Rq, and Rz parameters) and number of cycles. A statistical analysis of the data was applied to the surface roughness results through a factorial design, considering a level of significance of 5% and a hypothesis test above 0.90, to validate the experimental tests. Reductions in the surface roughness values were obtained with the paste developed in the machining of steel workpieces, indicating that factors such as work material, number of cycles, and type of abrasive grain can influence the final result of the AFM machining.

Vorheriger Artikel An early fault elimination method of computerized numerical control machine tools

Nächster Artikel Influences of shape of the new interfaces and morphology of the intermetallics on mechanical properties of aluminum AA2024–pure copper joints by friction stir welding

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Kumar SS, Hiremath SS (2016) A review on abrasive flow machining (AFM). Procedia Technol 25:1297–1304. https://doi.org/10.1016/j.protcy.2016.08.224 CrossRef

Kumar R, Murtaza Q, Walia RS (2014) Three start helical abrasive flow machining for ductile materials. Procedia Mater Sci 6:1884–1890. https://doi.org/10.1016/j.mspro.2014.07.220 CrossRef

Sedlaček M, Podgornik B, Vižintin J (2009) Influence of surface preparation on roughness parameters, friction and wear. Wear. https://doi.org/10.1016/j.wear.2008.04.017 CrossRef

Svahn F, Kassman-Rudolphi Å, Wallén E (2003) The influence of surface roughness on friction and wear of machine element coatings. Wear 254:1092–1098. https://doi.org/10.1016/S0043-1648(03)00341-7 CrossRef

Chang WR, Hirvonen M, Grönqvist R (2004) The effects of cut-off length on surface roughness parameters and their correlation with transition friction. Saf Sci 42:755–769. https://doi.org/10.1016/j.ssci.2004.01.002 CrossRef

Ali P, Dhull S, Walia RS, et al (2017) Hybrid abrasive flow machining for nano finishing - a review. In: Materials Today: Proceedings. Elsevier Ltd, pp 7208–7218

de Mello HJ, de Mello DR, Rodriguez RL, et al (2018) Contribution to cylindrical grinding of interrupted surfaces of hardened steel with medium grit wheel. 4049–4057

Lopes JC, Ventura CEH, Rodriguez RL, Talon AG, Volpato RS, Sato BK, Mello HJ, Aguiar PR, Bianchi EC (2018) Application of minimum quantity lubrication with addition of water in the grinding of alumina. Int J Adv Manuf Technol 97:1951–1959. https://doi.org/10.1007/s00170-018-2085-8 CrossRef

Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Dinis Pinto TA, Mello HJ, Aguiar PR, Bianchi EC (2019) Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. Int J Adv Manuf Technol 104:1437–1448. https://doi.org/10.1007/s00170-019-04005-5 CrossRef

10.

Lopes JC, de Martini FL, Domingues BB et al (2019) Effect of CBN grain friability in hardened steel plunge grinding. Int J Adv Manuf Technol 103:1567–1577. https://doi.org/10.1007/s00170-019-03654-w CrossRef

11.

de Martini Fernandes L, Lopes JC, Volpato RS et al (2018) Comparative analysis of two CBN grinding wheels performance in nodular cast iron plunge grinding. Int J Adv Manuf Technol 98:237–249. https://doi.org/10.1007/s00170-018-2133-4 CrossRef

12.

Sato BK, Rodriguez RL, Talon AG et al (2019) Grinding performance of AISI D6 steel using CBN wheel vitrified and resinoid bonded. Int J Adv Manuf Technol:2167–2182. https://doi.org/10.1007/s00170-019-04407-5 CrossRef

13.

de Martini Fernandes L, Lopes JC, Ribeiro FSF et al (2019) Thermal model for surface grinding application. Int J Adv Manuf Technol 104:2783–2793. https://doi.org/10.1007/s00170-019-04101-6 CrossRef

14.

Alexandre FA, Lopes WN, Lofrano Dotto FR, Ferreira FI, Aguiar PR, Bianchi EC, Lopes JC (2018) Tool condition monitoring of aluminum oxide grinding wheel using AE and fuzzy model. Int J Adv Manuf Technol 96:67–79. https://doi.org/10.1007/s00170-018-1582-0 CrossRef

15.

Javaroni RL, Lopes JC, Sato BK, Sanchez LEA, Mello HJ, Aguiar PR, Bianchi EC (2019) Minimum quantity of lubrication (MQL) as an eco-friendly alternative to the cutting fluids in advanced ceramics grinding. Int J Adv Manuf Technol 103:2809–2819. https://doi.org/10.1007/s00170-019-03697-z CrossRef

16.

de Moraes DL, Garcia MV, Lopes JC et al (2019) Performance of SAE 52100 steel grinding using MQL technique with pure and diluted oil. Int J Adv Manuf Technol:4211–4223. https://doi.org/10.1007/s00170-019-04582-5 CrossRef

17.

Rodriguez RL, Lopes JC, Mancini SD, Ângelo Sanchez LE, Almeida Varasquim FMF, Volpato RS, Mello HJ, Aguiar PR, Bianchi EC (2019) Contribution for minimization the usage of cutting fluids in CFRP grinding. Int J Adv Manuf Technol 103:487–497. https://doi.org/10.1007/s00170-019-03529-0 CrossRef

18.

Lopes JC, Fragoso KM, Garcia MV, Ribeiro FSF, Francelin AP, Angelo Sanchez LE, Rodrigues AR, Mello HJ, Aguiar PR, Bianchi EC (2019) Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning. Int J Adv Manuf Technol 105:4373–4387. https://doi.org/10.1007/s00170-019-04571-8 CrossRef

19.

Rodriguez RL, Lopes JC, Hildebrandt RA et al (2019) Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface. J Mater Process Technol 271:357–367. https://doi.org/10.1016/j.jmatprotec.2019.03.019 CrossRef

20.

Bianchi EC, Sato BK, Sales AR et al (2018) Evaluating the effect of the compressed air wheel cleaning in grinding the AISI 4340 steel with CBN and MQL with water. Int J Adv Manuf Technol 95:2855–2864. https://doi.org/10.1007/s00170-017-1433-4 CrossRef

21.

Bianchi EC, Rodriguez RL, Hildebrandt RA et al (2018) Plunge cylindrical grinding with the minimum quantity lubrication coolant technique assisted with wheel cleaning system. Int J Adv Manuf Technol 95:2907–2916. https://doi.org/10.1007/s00170-017-1396-5 CrossRef

22.

Lopes JC, Garcia MV, Valentim M, Javaroni RL, Ribeiro FSF, Angelo Sanchez LE, Mello HJ, Aguiar PR, Bianchi EC (2019) Grinding performance using variants of the MQL technique: MQL with cooled air and MQL simultaneous to the wheel cleaning jet. Int J Adv Manuf Technol 105:4429–4442. https://doi.org/10.1007/s00170-019-04574-5 CrossRef

23.

Bianchi EC, Rodriguez RL, Hildebrandt RA et al (2019) Application of the auxiliary wheel cleaning jet in the plunge cylindrical grinding with minimum quantity lubrication technique under various flow rates. Proc Inst Mech Eng Part B J Eng Manuf 233:1144–1156. https://doi.org/10.1177/0954405418774599 CrossRef

24.

Lopes JC, Ventura CEH, Fernandes L d M et al (2019) Application of a wheel cleaning system during grinding of alumina with minimum quantity lubrication. Int J Adv Manuf Technol 102:333–341. https://doi.org/10.1007/s00170-018-3174-4 CrossRef

25.

Marinescu, ID, Rowe, WB, Dimitrov, B, Ohmori, H (2012) Tribology of abrasive machining processes. William Andrew

26.

Brinksmeier E, Mutlugünes Y, Klocke F et al (2010) Ultra-precision grinding. CIRP Ann 59:652–671. https://doi.org/10.1016/J.CIRP.2010.05.001 CrossRef

27.

Bähre D, Brünnet H, Swat M (2012) Investigation of one-way abrasive flow machining and in-process measurement of axial forces. In: Procedia CIRP. Elsevier B.V., pp 419–424

28.

Raju HP, Narayanasamy K, Srinivasa YG, Krishnamurthy R (2005) Characteristics of extrude honed SG iron internal primitives. J Mater Process Technol 166:455–464. https://doi.org/10.1016/j.jmatprotec.2004.07.100 CrossRef

29.

Singh S, Shan HS, Kumar P (2002) Wear behavior of materials in magnetically assisted abrasive flow machining. J Mater Process Technol 128:155–161. https://doi.org/10.1016/S0924-0136(02)00442-9 CrossRef

30.

Fang L, Zhao J, Sun K et al (2009) Temperature as sensitive monitor for efficiency of work in abrasive flow machining. Wear. https://doi.org/10.1016/j.wear.2008.08.014 CrossRef

31.

Gorana VK, Jain VK, Lal GK (2004) Experimental investigation into cutting forces and active grain density during abrasive flow machining. Int J Mach Tools Manuf 44:201–211. https://doi.org/10.1016/j.ijmachtools.2003.10.004 CrossRef

32.

Sankar MR, Jain VK, Ramkumar J (2011) Abrasive flow machining (AFM): an overview. Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, pp 1–8

33.

Munhoz MR, Dias LG, Breganon R et al (2019) Abrasive flow machining using abrasive paste with oiticica oil. Int J Adv Eng Res Sci 6

34.

Jain RK, Jain VK (2001) Specific energy and temperature determination in abrasive flow machining process. Int J Mach Tools Manuf 41:1689–1704. https://doi.org/10.1016/S0890-6955(01)00043-8 CrossRef

35.

Gates JD (1998) Two-body and three-body abrasion: a critical discussion. Wear 214:139–146. https://doi.org/10.1016/S0043-1648(97)00188-9 CrossRef

36.

Fang L, Zhou Q (1995) A statistical model describing wear traces in three-body abrasion. Tribotest 2:47–53. https://doi.org/10.1002/tt.3020020106 CrossRef

37.

Jain VK, Adsul SG (2000) Experimental investigations into abrasive flow machining (AFM). Int J Mach Tools Manuf 40:1003–1021. https://doi.org/10.1016/S0890-6955(99)00114-5 CrossRef

Titel: Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil
verfasst von: Marcelo Rodrigo Munhoz
Larissa Galante Dias
Ricardo Breganon
Fernando Sabino Fonteque Ribeiro
Janaina Fracaro de Souza Gonçalves
Elizabeth Mie Hashimoto
Carlos Elias da Silva Júnior
Publikationsdatum: 30.01.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 11-12/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04920-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2020

An improved machine tool volumetric error compensation method based on linear and squareness error correction method

Corrosion performance of nanocomposite coatings in moist SO2 environment

Study on die-less spinning of square section cone with fillets

Material removal mechanism of superalloy Inconel 718 based on electrochemical abrasive jet processing

Prediction of strain path and forming limit curve of AHSS by incorporating microstructure evolution

Effects of the exposition of an autoclave prepreg to the processing environment on its properties, curing cycle and final composite behavior

Premium Partner

Marktübersichten