nach oben

Metallurgist

Erschienen in:

05.09.2024

Analyzing methods for enhancing the mechanical properties of hot-finished sintered steels

verfasst von: M. S. Egorov, R. V. Egorova

Erschienen in: Metallurgist | Ausgabe 5/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A method has been proposed to enhance the mechanical properties of hot-finished sintered steels, which consists of additional plastic deformation with a degree of deformation, at which the intracrystalline bonding of the material is preserved. The effect of ultrafine silicon nitride particles on the structural formation and properties of hot-finished sintered steels is analyzed.

Vorheriger Artikel Workpiece temperature and extrusion rate effects on stress-strain condition and defect formation in a drill pipe with a protector

Nächster Artikel Vacuum synthesis of composite powder of Al–Ni system for fabricating aluminum-matrix composite reinforced with Al3Ni particles

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Egorov MS, Eremeeva Egorova ZVRV (2021) Methods for Producing Iron and Steel Powders and Structural Materials on their Basis. DGTU, Rostov-on-Don

Egorov MS, Egorova RV (2023) Development of inter-particle bonding during sintering of metal powders with the addition of carbon. Bezopasnost’ Tekhnogennykh I Prirodnykh Sistem 7(3):55–65

Volkov GM (2017) Historical premises and prospects of nanotechnology. Nanotekhnologii: Nauka I Proizv (2):23–31

Kablov YN, Ospennikova OG, Bazyleva OA (2011) Materials for highly heat-loaded parts of gas turbine engines. Vestn Mgtu Im Ne Baumana Ser Mashinostroenie SP2:13–19

Egorov MS, Egorova RV, Egorov SN (2023) Sintered steels modified with nanoscale silicon nitride. Metallurg (3):36–41

Yu. Dorofeev V, Egorov SN (2003) Inter-particle bonding during the formation of powder hot-deformed materials. Metallurgizdat, Moscow

Antsiferov VN (1995) Problems of Modern Materials and Technologies. Perm. Gos. Tekh. Univ., Perm

Antsiferov VN, Ye V (2001) Perelman, Mechanics of Powder and Composite Material Compaction Processes. Moscow

Eremeeva ZV, Nitkin NM, Korobov NP, Ter-Vaganyants YS (2016) Study of the processes of heat treatment of sintered steels alloyed with nanoscale additives. Nanotekhnologii: Nauka I Proizv 1(38):63–74

10.

Yu. Lopatin V, Eremeeva Kh. Sharipzyanova Nitkin ZVGNM (2014) Powder Metallurgy in Automotive and other Industrial Sectors. Univ. Mashinostr, Moscow

11.

Gurevich YG, Antsiferov VN, Savinykh LM, Oglezneva SA, Bulanov VYa (2005) Wear-resistant Composites. UrO RAN, Yekaterinburg

12.

Skorikov RA (2015) Spark plasma sintering of powder carbon steel reinforced with nanoparticles. Nanotekhnologii: Nauka I Proizv 2(34):34–40

13.

Dyachkova LN, Dechko MM (2015) Effect of nanodispersed additives on the structure and properties of sintered carbon and high-chromium steels. Nanotekhnologii: Nauka I Proizv 3(35):5–14

14.

Panov VS, Skorikov RA (2015) Effect of nanoscale alloying additives on the structure and properties of powder carbon steels. Nanotekhnologii: Nauka I Proizv 3(35):40–45

15.

Egorov MS, Egorova RV, Kovtun MV (2023) Effect of carbon content on the formation of contact surface during hot repressing. Bezopasnost’ Tekhnogennykh I Prirodnykh Sistem 7(2):90–101

Titel: Analyzing methods for enhancing the mechanical properties of hot-finished sintered steels
verfasst von: M. S. Egorov
R. V. Egorova
Publikationsdatum: 05.09.2024
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 5/2024
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01779-2

Influence of the properties of working liquid on the size characteristics of powders obtained under the conditions of electroerosion metallurgy of the wastes of TN20 tungsten-free hard alloy

Development and industrial exploitation of welding technology for heat-resistant nickel alloys for high-temperature nuclear power plants

Effect of retrograssion and re-aging on microstructure and properties of Al–Zn–Mg–Cu–Zr–Er alloy

Strenghthening features of mechanically alloyed Al-Mn-Cu alloy

Effect of calcium additive on the kinetics of oxidation of solid lead babbit B(PbSb15Sn10)

Modernization of the control system for gas purification in ferroalloy furnaces

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht