nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

ANFIS and RSM Modelling Analysis on Surface Roughness of PB Composites in Drilling with HSS Drills

verfasst von : T. N. Valarmathi, K. Palanikumar, S. Sekar, B. Latha

Erschienen in: Futuristic Trends in Intelligent Manufacturing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Particleboard is normally used for attractive interior designs. Machining reduces its surface characteristics. Hence the evaluation of favorable machining conditions is desired in improving the quality. In the present investigation, drilling has been performed using HSS drills based on Taguchi’s L27 orthogonal array with three parameters and three levels to analyze the surface roughness. Two modelling approaches have been used to develop mathematical models for comparing their effectiveness.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Application of Back Propagation Algorithm in Optimization of Weave Friction Stir Welding—A Study

Nächstes Kapitel Machine Learning for Smart Manufacturing for Healthcare Applications

Iqbal, A., Suhaimi, H., & He, N. (2019). A sustainability comparison between drilling and milling for hole-enlargement in machining of hardened steels. Machining Science and Technology. https://doi.org/10.1080/10910344.2019.1575409.

Asilturk, I., & Akkuş, H. (2011). Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method. Measurement, 44, 1697–1704.

Baburaj, E., Mohana Sundaram, K. M., & Senthil, P. (2016). Effect of high speed turning operation on surface roughness of hybrid metal matrix (Al-SiCp-fly ash) composite. Journal of Mechanical Science and Technology, 30, 89. https://doi.org/10.1007/s12206-015-1210-y.CrossRef

Davim, J. P., Clemente, V. C., & Silva, S. (2009). Surface roughness aspects in milling MDF (Medium Density Fibreboard. International Journal of Advanced Manufacturing Technology, 40, 49–55.CrossRef

Beruvides, G., Castano, F., Quiza, R., & Haber, R. E. (2016). Surface roughness modeling and optimization of tungsten–copper alloys in micro-milling processes. Measurement, 86, 246–252.

Hiziroglu, S., Jarusombuti, S., & Fueangvivat, V. (2004). Surface roughness of wood composites manufactured in Thailand. Building and Environment, 39, 1359–1364.CrossRef

Hiziroglu, S., & Kosonkorn, P. (2006). Evaluation of surface roughness of Thai medium density fiberboard (MDF). Building and Environment, 41, 527–533.CrossRef

Hutyrova, Z., Harnicarova, M., Zajac, J., Valicek, J., & Mihok, J. (2014). Experimental study of surface roughness of wood plastic composites after turning. Advanced Materials Research, 856, 108–112.

Hutyrova, Z., Zajac, J., Michalik, P., Mita, D., Valicek, J., & Gajdos, S. (2015). Study of surface roughness of machined polymer composite material. International Journal of Polymer Science, Article ID 303517, 1–6.

10.

Jang, J. S. R. (1993). ANFIS: Adaptive-network based fuzzy inference system. IEEE Transactions on Systems, Man, and Cybernetics, 1993(23), 665–685.CrossRef

11.

Kaviarasan, V., Venkatesan, R., & Natarajan, E. (2019). Prediction o surface quality and optimization of process parameters in drilling of Delrin using neural network. Progress in Rubber, Plastics and Recycling Technology, 35(3), 149–169.CrossRef

12.

Krishnamoorthy, A., rakash, S., Mercy, J.L., & Ramesh, S. (2019). Machinability studies in drilling carbon fiber reinforced Composites. Hole-Making and Drilling Technology for Composites. https://doi.org/10.1016/B978-0-08-102397-6.00012-X.

13.

Latha, B., Senthilkumar, V. S., & Palanikumar, K. (2011). Modeling and optimization of process parameters for delamination in drilling glass fiber reinforced plastic (GFRP) composites. Machining Science and Technology, 15(2), 172–191. https://doi.org/10.1080/10910344.2011.579802.CrossRef

14.

Lilly Mercy, J., Prakash, S., Krishnamoorthy, A., Ramesh, S., & Anand, D. A., Experimental investigation and multiresponse genetic optimization of drilling parameters for self-healing GFRP. Journal of Mechanical Science and Technology, 31 (8), 3777–3785.

15.

Lin, R. J. T., Houts, J. V., Bhattacharyya. (2006). Machinability investigation of medium-density fibre board. European Journal of Wood, 60, 76.

16.

Kilic, M., Hiziroglu, S., & Burdurlu, E. (2006). Effect of machining on surface roughness of wood. Building and Environment, 41(8), 074–1078. https://doi.org/10.1016/j.buildenv.2005.05.008.CrossRef

17.

Kilic, M. (2017). Determination of the surface roughness values of Turkish red pine (Pinus brutia (Ten.)) woods. Bioresources, 12(1), 1216–1227.

18.

Natarajan, E., Kaviarasan, V., Lim, W. H., Tiang, S. S., & Tan, T. H. (2018). Enhanced multi-objective teaching-learning-based optimization for machining of delrin. IEEE Access, 6, 51528–51546. https://doi.org/10.1109/ACCESS.2018.2869040.CrossRef

19.

Natarajan, E., Kaviarasan, V., Lim, W. H., et al. (2020). Non-dominated sorting modified teaching–learning-based optimization for multi-objective machining of polytetrafluoroethylene (PTFE). Journal of Intellectual Manufacturing, 31, 911–935. https://doi.org/10.1007/s10845-019-01486-9.CrossRef

20.

Palanikumar, K., & Valarmathi, T. N. (2016). Experimental investigation and analysis on thrust force in drilling of wood composite medium density fiberboard (MDF) panels. Experimental Techniques, 40(1), 391–400.CrossRef

21.

Palanikumar, K. (2011). Experimental investigation and optimization in drilling of GFRP composites. Measurement, 44, 2138–2148.CrossRef

22.

Prakash, S., Mercy, J. L., Palanikumar, K., Ramesh, S., Jamal, M. I., & Michael, A. J. (2012). Experimental Studies on Surface roughness in drilling MDF composite panels using Taguchi and Regression Analysis Method. Journal of Applied Sciences, 12(10), 978–984.CrossRef

23.

Sangeetha, M., & Prakash, S. (2017). Experimental investigation of process parameters in drilling LM25 composites coated with multi wall carbon nano tubes using sonication process. Archives of Metallurgy and Materials, 62(3). https://doi.org/10.1515/amm-2017-0268.

24.

Surinder Kumar, M., & Satsangi, P. S. (2013). Multiple-response optimization of turning machining by the Taguchi method and the utility concept using uni-directional glass fiber reinforced plastic composite and carbide (K10) cutting tool. Journal of Mechanical Science and Technology, 27 (9), 2829–2837.

25.

Shanmughasundaram, S. (2013). Influence of graphite and machining parameters on the surface roughness of Al- fly ash/ graphite hybrid composite: a Taguchi approach. Journal of Mechanical Science and Technology, 2445–245.

26.

Sheikh-Ahmad J. (2009). Machining of polymer composites. Springer Science Business Media, LLC, New York: Springer; https://doi.org/10.1007/978-0-387-68619-6, ISBN: 978-0-387-35539-9.

27.

Valarmathi, T. N., Palanikumar, K., & Sekar, S. (2013). Prediction of parametric influence on thrust force in drilling of wood composite panels. International Journal of Mining, Metallurgy & Mechanical Engineering, 1(1), 71–74.

28.

Valarmathi, T. N., Palanikumar, K., & Sekar, S. (2013a). Thrust force studies in drilling of medium density fiberboard Panels. Advanced Materials Research, 622–623, 1285–1299.

29.

Valarmathi, T. N., Palanikumar, K. & Latha, B. (2013b). Measurement and analysis of thrust force in drilling of particleboard (PB) composite panels. Measurement, 46, 1220–1230.

30.

Valarmathi, T. N., Palanikumar, K., & Sekar, S. (2013c). Parametric analysis on delamination in drilling of wood composite panels. Indian Journal of Science and Technology, 6, 4347–4356.

31.

Valarmathi, T. N., Sekar, S., Antony, G., Suresh, R., & Balan, K. K. (2019). Experimental studies on surface Roughness of H12 tool steel in EDM using different tool materials: Volume 1, January 2019. https://doi.org/10.1007/978-981-13-2697-4_27.

32.

Valarmathi, T. N., Palanikumar, K., Sekar, S., & Latha, B. (2020). Investigation of the effect of process parameters on surface roughness in drilling of particleboard composite panels using adaptive neuro fuzzy inference system. Materials and Manufacturing Processes, 469–477.

Titel: ANFIS and RSM Modelling Analysis on Surface Roughness of PB Composites in Drilling with HSS Drills
verfasst von: T. N. Valarmathi
K. Palanikumar
S. Sekar
B. Latha
Verlag: Springer International Publishing
Buch: Futuristic Trends in Intelligent Manufacturing
Print ISBN: 978-3-030-70008-9

Electronic ISBN: 978-3-030-70009-6

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-70009-6_8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht