Skip to main content
Erschienen in: Strength of Materials 1/2016

22.03.2016

Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel

verfasst von: HanSur Bang, HeeSeon Bang, M. J. Na, G. H. Jeon, G.-S. Kim, B. R. Kim

Erschienen in: Strength of Materials | Ausgabe 1/2016

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This study aims to establish the weld quality of the Nd:YAG laser-MIG hybrid welding on galvanized steel (SGACC60). In order to do so, the Taguchi analysis optimized the laser-arc hybrid welding process for SGACC60 by varying four parameters: welding speed, welding current, laser-arc distance and shielding gas. The experiment produced 18 combinations of these four essential welding parameters, which were estimated in terms of ultimate tensile strength, welding depth and width ratio, and hardness. The optimum result exhibited that the tensile strength of welds was approximately 101% of that of the base metal, and that their hardness was within the acceptable range (the maximum value 350 Hv).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Q. A. Wu, J. K. Gong, G. Y. Chen, and L. Y. Xu, “Research on laser welding of vehicle body,” Opt. Laser Technol., 40, 420–426 (2008).CrossRef Q. A. Wu, J. K. Gong, G. Y. Chen, and L. Y. Xu, “Research on laser welding of vehicle body,” Opt. Laser Technol., 40, 420–426 (2008).CrossRef
2.
Zurück zum Zitat E. Beyer, U. Dilthey, R. Imhoff, et al., “New aspects in laser welding with an increased efficiency,” in: Proc. of ICALEO’94, Orlando, FL (1994), pp. 183–192. E. Beyer, U. Dilthey, R. Imhoff, et al., “New aspects in laser welding with an increased efficiency,” in: Proc. of ICALEO’94, Orlando, FL (1994), pp. 183–192.
3.
Zurück zum Zitat S.-M. Joo, H.-S. Bang, and S.-Y. Kwak, “Optimization of hybrid CO2 laser-GMA welding parameters on dissimilar materials AH32/STS304L using Grey-based Taguchi analysis,” Int. J. Prec. Eng. Manuf., 15, 447–454 (2014).CrossRef S.-M. Joo, H.-S. Bang, and S.-Y. Kwak, “Optimization of hybrid CO2 laser-GMA welding parameters on dissimilar materials AH32/STS304L using Grey-based Taguchi analysis,” Int. J. Prec. Eng. Manuf., 15, 447–454 (2014).CrossRef
4.
Zurück zum Zitat C. Fuhrmann, D. Petring, and R. Poprawe, “Recent results on high power CO2 and Nd:YAG laser-arc welding of thick steel plates,” in: Proc. of the 3rd Int. WLT Conf. on Lasers in Manufacturing (2005), pp. 185–192. C. Fuhrmann, D. Petring, and R. Poprawe, “Recent results on high power CO2 and Nd:YAG laser-arc welding of thick steel plates,” in: Proc. of the 3rd Int. WLT Conf. on Lasers in Manufacturing (2005), pp. 185–192.
5.
Zurück zum Zitat M. Katsuna and L. Chen, “Interaction of both plasmas in CO2 laser-MAG hybrid welding of carbon steel,” in: Proc. of SPIE (2003), Vol. 4831, pp. 341–346. M. Katsuna and L. Chen, “Interaction of both plasmas in CO2 laser-MAG hybrid welding of carbon steel,” in: Proc. of SPIE (2003), Vol. 4831, pp. 341–346.
6.
Zurück zum Zitat S. Katayama, Y. Naito, S. Uchium, and M. Mizutani, “Penetration and porosity prevention mechanism in laser-arc hybrid welding,” in: Proc. of the 3rd Int. WLT Conf. on Lasers in Manufacturing (2005), pp. 193–198. S. Katayama, Y. Naito, S. Uchium, and M. Mizutani, “Penetration and porosity prevention mechanism in laser-arc hybrid welding,” in: Proc. of the 3rd Int. WLT Conf. on Lasers in Manufacturing (2005), pp. 193–198.
7.
Zurück zum Zitat M. El Rayes, C. Walz, and G. Sepold, “The influence of various hybrid welding parameters on bead geometry,” Suppl. Weld. J., 147-S–153-S (2004). M. El Rayes, C. Walz, and G. Sepold, “The influence of various hybrid welding parameters on bead geometry,” Suppl. Weld. J., 147-S–153-S (2004).
8.
Zurück zum Zitat S. Herbert, “Laser-hybrid welding of ships,” Weld. J., 83, No. 6, 39–44 (2004). S. Herbert, “Laser-hybrid welding of ships,” Weld. J., 83, No. 6, 39–44 (2004).
9.
Zurück zum Zitat L. K. Pan, C. C. Wang, S. S. Wei, and H. F. Sher, “Optimizing multiple quality characteristics via Taguchi method-based Grey analysis,” J. Mater. Process. Technol., 182, No. 1, 107–116 (2007).CrossRef L. K. Pan, C. C. Wang, S. S. Wei, and H. F. Sher, “Optimizing multiple quality characteristics via Taguchi method-based Grey analysis,” J. Mater. Process. Technol., 182, No. 1, 107–116 (2007).CrossRef
10.
Zurück zum Zitat Saurav Datta, Asish Bandyopadhyay, and Pradip Kumar Pal, “Grey-based Taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding,” Int. J. Adv. Manuf. Technol., 39, 1136–1143 (2008).CrossRef Saurav Datta, Asish Bandyopadhyay, and Pradip Kumar Pal, “Grey-based Taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding,” Int. J. Adv. Manuf. Technol., 39, 1136–1143 (2008).CrossRef
11.
Zurück zum Zitat Metals Handbook – Ninth Edition (Vol. 8 – Mechanical Testing), ASM Handbook Committee (1985). Metals Handbook – Ninth Edition (Vol. 8 – Mechanical Testing), ASM Handbook Committee (1985).
12.
Zurück zum Zitat S. Maghsoodloo, G. Ozdemir, V. Jordan, and C.-H. Huang, “Strengths and limitations of Taguchi’s contributions to quality, manufacturing, and process engineering,” J. Manuf. Syst., 23, No. 2, 73–126 (2004).CrossRef S. Maghsoodloo, G. Ozdemir, V. Jordan, and C.-H. Huang, “Strengths and limitations of Taguchi’s contributions to quality, manufacturing, and process engineering,” J. Manuf. Syst., 23, No. 2, 73–126 (2004).CrossRef
13.
Zurück zum Zitat Amit Kumar Sinha, Duck Young Kim, Darek Ceglarek, “Correlation analysis of the variation of weld seam and tensile strength in laser welding of galvanized steel,” Opt. Lasers Eng., 51, 1143–1152 (2013). Amit Kumar Sinha, Duck Young Kim, Darek Ceglarek, “Correlation analysis of the variation of weld seam and tensile strength in laser welding of galvanized steel,” Opt. Lasers Eng., 51, 1143–1152 (2013).
14.
Zurück zum Zitat M. Khan, L. Romoli, M. Fiaschi, et al., “Experimental design approach to the process parameter optimization for laser welding of martensitic stainless steels in a constrained overlap configuration,” Opt. Laser Technol., 43, 158–172 (2011).CrossRef M. Khan, L. Romoli, M. Fiaschi, et al., “Experimental design approach to the process parameter optimization for laser welding of martensitic stainless steels in a constrained overlap configuration,” Opt. Laser Technol., 43, 158–172 (2011).CrossRef
15.
Zurück zum Zitat D. Havrilla, “Photonics applied: materials processing-successful laser welding demands optimized laser joint design,” Laser Focus World, 48, 43–48 (2012). D. Havrilla, “Photonics applied: materials processing-successful laser welding demands optimized laser joint design,” Laser Focus World, 48, 43–48 (2012).
16.
Zurück zum Zitat D. Havrilla, “Photonics applied: materials processing-successful laser welding demands optimized laser joint design,” Laser Focus World, 48, 43–48 (2012). D. Havrilla, “Photonics applied: materials processing-successful laser welding demands optimized laser joint design,” Laser Focus World, 48, 43–48 (2012).
17.
Zurück zum Zitat D. X. Yang, X. Y. Li, D. Y. He, et al., “Optimization of weld bead geometry in laser welding with filler wire process using Taguchi’s approach,” Opt. Laser Technol., 44, 2020–2025 (2012).CrossRef D. X. Yang, X. Y. Li, D. Y. He, et al., “Optimization of weld bead geometry in laser welding with filler wire process using Taguchi’s approach,” Opt. Laser Technol., 44, 2020–2025 (2012).CrossRef
Metadaten
Titel
Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel
verfasst von
HanSur Bang
HeeSeon Bang
M. J. Na
G. H. Jeon
G.-S. Kim
B. R. Kim
Publikationsdatum
22.03.2016
Verlag
Springer US
Erschienen in
Strength of Materials / Ausgabe 1/2016
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-016-9749-0

Weitere Artikel der Ausgabe 1/2016

Strength of Materials 1/2016 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.