Ausgabe 2/2017
Special Issue: Research Into the Structural Integrity of Engineering Composites at the University of Manchester
Inhalt (17 Artikel)
A decade of science and engineering of composite materials at the North West Composites Centre, University of Manchester, UK
Constantinos Soutis
Predictive Model of Graphene Based Polymer Nanocomposites: Electrical Performance
Asimina Manta, Matthieu Gresil, Constantinos Soutis
The Effect of Shear Mixing Speed and Time on the Mechanical Properties of GNP/Epoxy Composites
Edward Pullicino, Wentao Zou, Matthieu Gresil, Costas Soutis
Effect of pre and Post-Dispersion on Electro-Thermo-Mechanical Properties of a Graphene Enhanced Epoxy
Quentin-Arthur Poutrel, Zixin Wang, Dongyi Wang, Constantinos Soutis, Matthieu Gresil
Influence of Tow Architecture on Compaction and Nesting in Textile Preforms
Z. Yousaf, P. Potluri, P. J. Withers
Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites
D. Göktaş, W. R. Kennon, P. Potluri
Investigating the Potential of Using Off-Axis 3D Woven Composites in Composite Joints’ Applications
Mohamed Nasr Saleh, Ying Wang, Arief Yudhanto, Adam Joesbury, Prasad Potluri, Gilles Lubineau, Constantinos Soutis
Tensile Response of Hoop Reinforced Multiaxially Braided Thin Wall Composite Tubes
Sree Shankhachur Roy, Prasad Potluri, Constantinos Soutis
Numerical and Experimental Investigation of the Hydrostatic Performance of Fibre Reinforced Tubes
S. Pavlopoulou, S. S. Roy, M. Gautam, L. Bradshaw, P. Potluri
Bolted Joints in Three Axially Braided Carbon Fibre/Epoxy Textile Composites with Moulded-in and Drilled Fastener Holes
Akın Ataş, Mayank Gautam, Constantinos Soutis, Prasad Potluri
Fatigue Behaviour of Composite T-Joints in Wind Turbine Blade Applications
Y. Wang, C. Soutis
Multifunctional Carbon Fibre Tapes for Automotive Composites
V. Koncherry, P. Potluri, A. Fernando
Microwaves Sensor for Wind Turbine Blade Inspection
Zhen Li, Arthur Haigh, Constantinos Soutis, Andrew Gibson, Robin Sloan
EVITA Project: Comparison Between Traditional Non-Destructive Techniques and Phase Contrast X-Ray Imaging Applied to Aerospace Carbon Fibre Reinforced Polymer
Matthieu Gresil, Vincent Revol, Konstantinos Kitsianos, Georges Kanderakis, Ilias Koulalis, Marc-Olivier Sauer, Hervé Trétout, Ana-Maria Madrigal
Characterisation of Damaged Tubular Composites by Acoustic Emission, Thermal Diffusivity Mapping and TSR-RGB Projection Technique
Neha Chandarana, Henri Lansiaux, Matthieu Gresil
Structural Health Monitoring Using Lamb Wave Reflections and Total Focusing Method for Image Reconstruction
Aurelia Muller, Bradley Robertson-Welsh, Patrick Gaydecki, Matthieu Gresil, Constantinos Soutis