Challenges and Solutions for Post-CMP Cleaning of Ceria Particles for Advanced Technology Nodes

It has been very difficult to remove smaller ceria particles from oxide surfaces after polishing. As the particle size decreases from 90 to 10 nm, cleaning efficiency of SC1 solution decreases from ~94 % to ~19 %, presumably because smaller ceria particles with a higher surface concentration of Ce³⁺ are more strongly coupled with silicon dioxide surfaces via strong Ce-O-Si bonding. (1) As was reported earlier, where the cleaning of oxide surfaces of ceria particles from slurries containing no additives, we reported that equimolar solutions containing H₂O₂ and NH₄OH (4.2 mol l⁻¹ each of H₂O₂ and NH₄OH), aided by ultrasonic cleaning, and at high pH could almost completely remove even 10 nm sized ceria particles from silicon dioxide film surfaces. (1)

However, a cleaning solution containing H₂O₂ and NH₄OH at equal molar (4.2 mol l⁻¹) was not effective in cleaning oxide and nitride surfaces contaminated with ceria particles in the presence of additives such as proline and citric acid. (2) Recently, we reported a cleaning solution comprising 1 wt% ascorbic acid, 1 wt% ammonium carbonate and 50 ppm Triton X-100 at pH 12, aided by ultransonic energy, to clean ~30 nm ceria particles from both oxide and nitride films with ~ 99% cleaning efficiencies. The binding between the additive-covered ceria particle particles and the oxide/nitride surfaces could be broken by the nucleophilic attack of hydroxyl ions. Ascorbic acid and ammonium carbonate prevent ceria particle redeposition by adsorbing on the surface of the removed particles and blocking the active Ce³⁺ species. Triton X-100 reduces adhesion between the particle and the film surfaces during cleaning.

(1) Seo, J., Gowda, A., & Babu, S. V. (2018). Almost complete removal of ceria particles down to 10 nm size from silicon dioxide surfaces. ECS Journal of Solid State Science and Technology, 7(5), P243.

(2) Gowda, A., Seo, J., Ranaweera, C. K., & Babu, S. V. (2020). Cleaning Solutions for Removal of∼ 30 nm Ceria Particles from Proline and Citric Acid Containing Slurries Deposited on Silicon Dioxide and Silicon Nitride Surfaces. ECS Journal of Solid State Science and Technology, 9(4), 044013.