nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

Assessment of Cost and Energy Requirements of Electron Beam Melting (EBM) and Machining Processes

verfasst von : Paolo C. Priarone, Matteo Robiglio, Giuseppe Ingarao, Luca Settineri

Erschienen in: Sustainable Design and Manufacturing 2017

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Additive Manufacturing is under the spotlight as potential disruptive technology, particularly for the production of complex-shaped structural metallic components. However, the actual AM process capabilities present some limitations in achieving the strict part quality requirements imposed by the aerospace and automotive sectors. Therefore, the integration of AM and conventional manufacturing represents an emerging scenario to be investigated. In this paper, a pure machining process and a hybrid production route (based on EBM and finish machining) are compared. The influence of material usage-related factors on costs and energy demand is discussed. The results prove that, despite precise process judgments are case-specific, the proposed methodologies are suitable to provide guidelines for identifying the optimal manufacturing route under multiple design objectives.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Sustainable Small Batch Reproduction via Additive Manufacturing and Vacuum Casting: The Case Study of a Rhinoceros Toy Figure

Nächstes Kapitel Engineering a More Sustainable Manufacturing Process for Metal Additive Layer Manufacturing Using a Productive Process Pyramid

Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., Masanet, E.: Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. J. Clean. Prod. 135, 1559–1570 (2016)CrossRef

Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., Ituarte, I.F.: Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Ann. - Manuf. Technol. 65(1), 29–32 (2016)CrossRef

Allen, J.: An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts. Manufacturing Technology Rolls-Royce plc, UK. Unclassified report RTO-MP-AVT-139 (2006)

Schröder, M., Falk, B., Schmitt, R.: Evaluation of cost structures of additive manufacturing processes using a new business model. Proc. CIRP 30, 311–316 (2015)CrossRef

Priarone, P.C., Ingarao, G., Di Lorenzo, R., Settineri, L.: Influence of material-related aspects of additive and subtractive Ti-6Al-4V manufacturing on energy demand and carbon dioxide emissions. J. Ind. Ecol. DOI:10.1111/jiec.12523 (In Press)

Priarone, P.C., Robiglio, M., Settineri, L., Tebaldo, V.: Modelling of specific energy requirements in machining as a function of tool and lubricoolant usage. CIRP Ann. - Manuf. Technol. 65(1), 25–28 (2016)CrossRef

Dahmus, J., Gutowski, T.: An environmental analysis of machining. In: Proceedings of the 2004 ASME International Mechanical Engineering Congress and RD&D Exposition (IMECE2004-62600), Anaheim, California, USA (2004)

Ashby, M.F.: Materials and the Environment: Eco-informed Material Choice, 2nd edn. Butterworth Heinemann/Elsevier, Oxford (2013)

Dawes, J., Bowerman, R., Trepleton, R.: Introduction to the additive manufacturing powder metallurgy supply chain. Johns. Matthey Technol. Rev. 59(3), 243–256 (2015)CrossRef

10.

Ingarao, G., Priarone, P.C., Gagliardi, F., Di Lorenzo, R., Settineri, L.: Subtractive versus mass conserving metal shaping technologies: an environmental impact comparison. J. Clean. Prod. 87, 862–873 (2015)CrossRef

11.

Duflou, J.R., Sutherland, J., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S., Hauschild, M., Kellens, K.: Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Ann. - Manuf. Technol. 61(2), 587–609 (2012)CrossRef

12.

Mativenga, P.T., Rajemi, M.F.: Calculation of optimum cutting parameters based on minimum energy footprint. CIRP Ann. - Manuf. Technol. 60(1), 149–152 (2011)CrossRef

13.

Behrendt, T., Zein, A., Min, S.: Development of an energy consumption monitoring procedure for machine tools. CIRP Ann. - Manuf. Technol. 61(1), 43–46 (2012)CrossRef

14.

Campatelli, G., Scippa, A., Lorenzini, L., Sato, R.: Optimal workpiece orientation to reduce the energy consumption of a milling process. Int. J. Precis. Eng. Man - Green Technol. 2, 5–13 (2015)CrossRef

15.

Kara, S., Li, W.: Unit process energy consumption models for material removal processes. CIRP Ann. - Manuf. Technol. 60(1), 37–40 (2011)CrossRef

16.

Hammond, G., Jones, C.: Inventory of Carbon and Energy (ICE), Annex B: How to Account for recycling. The University of Bath, Bath, UK (2010)

17.

Baumers, M., Tuck C., Wildman R., Ashcroft I., Hague, R.: Energy inputs to additive manufacturing: does capacity utilization matter? In: Solid Freeform Fabrication Proceedings, Solid freeform Fabrication; an Additive Manufacturing Conference, pp. 30–40. University of Texas, Austin (2011)

18.

Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., Rosamond, E., Hague, R.: Transparency built-in: Energy consumption and cost estimation for additive manufacturing. J. Ind. Ecol. 17, 418–431 (2013)CrossRef

19.

Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., Rosamond, E., Hague, R.: Shape complexity and process energy consumption in electron beam melting. A case of something for nothing in additive manufacturing? J. Ind. Ecol. DOI:10.1111/jiec.12397 (in Press)

20.

Petrovic, V., Niñerola, R.: Powder recyclability in electron beam melting for aeronautical use. Aircr. Eng. Aerosp. Technol. 87(2), 147–155 (2015)CrossRef

21.

Nandwana, P., Peter, W.H., Dehoff, R.R., Lowe, L.E., Kirka, M.M., Medina, F., Babu, S.S.: Recyclability study on Inconel 718 and Ti-6Al-4V powders for use in electron beam melting. Metall. Mater. Trans. B 47(1), 754–762 (2016)CrossRef

22.

Kalpakjian, S., Schmid, S.R.: Manufacturing Engineering and Technology, 6th edn. Pearson, Upper Saddle River (2009)

23.

Vila, C., Siller, H.R., Rodriguez, C.A., Bruscas, G.M., Serrano, J.: Economical and technological study of surface grinding versus face milling in hardened AISI D3 steel machining operations. Int. J. Prod. Econ. 138, 273–283 (2012)CrossRef

24.

Yoon, H.-S., Moon, J.-S., Pham, M.-Q., Lee, G.-B., Ahn, S.-H.: Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs. J. Clean. Prod. 54, 41–48 (2013)CrossRef

25.

Schultheiss, F., Hägglund, S., Ståhl, J.-E.: Modeling the cost of varying surface finish demands during longitudinal turning operations. Int. J. Adv. Manuf. Technol. 84, 1103–1114 (2016)

26.

Pusavec, F., Kramar, D., Krajnik, P., Kopac, J.: Transitioning to sustainable production–part II: evaluation of sustainable machining technologies. J. Clean. Prod. 18, 1211–1221 (2010)CrossRef

27.

Hopkinson, N., Dickens, P.M.: Analysis of rapid manufacturing - using layer manufacturing processes for production. J. Mech. Eng. Sci. 217(C1), 31–39 (2003)CrossRef

28.

Atzeni, E., Salmi, A.: Economics of additive manufacturing for end-usable metal parts. Int. J. Adv. Manuf. Technol. 62, 1147–1155 (2012)CrossRef

29.

Ruffo, M., Tuck, C., Hague, R.: Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes. Proc. IMechE Part B: J. Eng. Manuf. 220, 1147–1427 (2006)CrossRef

30.

Baumers, M.: Economic aspects of additive manufacturing: benefits, costs and energy consumption. Doctoral thesis, Loughborough University (2012)

31.

Baumers, M., Dickens, P., Tuck, C., Hague, R.: The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technol. Forecast. Soc. 102, 193–201 (2016)CrossRef

32.

Hällgren, S., Pejryd, L., Ekengren, J.: Additive manufacturing and high speed machining - cost comparison of short lead time manufacturing methods. Proc. CIRP 50, 384–389 (2016)CrossRef

33.

Manogharan, G., Wysk, R.A., Harrysson, O.L.A.: Additive manufacturing - integrated hybrid manufacturing and subtractive processes: economic model and analysis. Int. J. Comput. Integ Manuf. 29, 473–488 (2016)CrossRef

34.

Qu, Y., Bektas, T., Bennell, J.: Sustainability SI: multimode multicommodity network design model for intermodal freight transportation with transfer and emission costs. Netw. Spat. Econ. 16, 303–329 (2016)MathSciNetCrossRef

Titel: Assessment of Cost and Energy Requirements of Electron Beam Melting (EBM) and Machining Processes
verfasst von: Paolo C. Priarone
Matteo Robiglio
Giuseppe Ingarao
Luca Settineri
Verlag: Springer International Publishing
Buch: Sustainable Design and Manufacturing 2017
Print ISBN: 978-3-319-57077-8

Electronic ISBN: 978-3-319-57078-5

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-57078-5_68

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"