Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 12/2017

13.11.2017

Assessment of Stress Corrosion Cracking Resistance of Activated Tungsten Inert Gas-Welded Duplex Stainless Steel Joints

verfasst von: B. Alwin, A. K. Lakshminarayanan, M. Vasudevan, P. Vasantharaja

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2017

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The stress corrosion cracking behavior of duplex stainless steel (DSS) weld joint largely depends on the ferrite-austenite phase microstructure balance. This phase balance is decided by the welding process used, heat input, welding conditions and the weld metal chemistry. In this investigation, the influence of activated tungsten inert gas (ATIG) and tungsten inert gas (TIG) welding processes on the stress corrosion cracking (SCC) resistance of DSS joints was evaluated and compared. Boiling magnesium chloride (45 wt.%) environment maintained at 155 °C was used. The microstructure and ferrite content of different weld zones are correlated with the outcome of sustained load, SCC test. Irrespective of the welding processes used, SCC resistance of weld joints was inferior to that of the base metal. However, ATIG weld joint exhibited superior resistance to SCC than the TIG weld joint. The crack initiation and final failure were in the weld metal for the ATIG weld joint; they were in the heat-affected zone for the TIG weld joint.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat J. Olsson and M. Snis, Duplex—A New Generation of Stainless Steels for Desalination Plants, Desalination, 2007, 205(1–3), p 104–113CrossRef J. Olsson and M. Snis, Duplex—A New Generation of Stainless Steels for Desalination Plants, Desalination, 2007, 205(1–3), p 104–113CrossRef
2.
Zurück zum Zitat E. Taban and E. Kaluc, Welding Behaviour of Duplex and Superduplex Stainless Steels Using Laser and Plasma Arc Welding Processes, Weld. World, 2011, 55(7), p 48–57CrossRef E. Taban and E. Kaluc, Welding Behaviour of Duplex and Superduplex Stainless Steels Using Laser and Plasma Arc Welding Processes, Weld. World, 2011, 55(7), p 48–57CrossRef
3.
Zurück zum Zitat Z. Zhang, H. Jing, L. Xu, Y. Han, G. Li, and L. Zhao, Investigation on Microstructure and Impact Toughness of Different Zones in Duplex Stainless Steel Welding Joint, J. Mater. Eng. Perform., 2017, 26(1), p 134–150CrossRef Z. Zhang, H. Jing, L. Xu, Y. Han, G. Li, and L. Zhao, Investigation on Microstructure and Impact Toughness of Different Zones in Duplex Stainless Steel Welding Joint, J. Mater. Eng. Perform., 2017, 26(1), p 134–150CrossRef
5.
Zurück zum Zitat M. Vasudevan, Computational and Experimental Studies on Arc Welded Austenitic Stainless Steel, Ph.D. thesis, Indian Institute of Technology, Madras, India, 2007 M. Vasudevan, Computational and Experimental Studies on Arc Welded Austenitic Stainless Steel, Ph.D. thesis, Indian Institute of Technology, Madras, India, 2007
6.
Zurück zum Zitat B. Arivazhagan and M. Vasudevan, A Study of Microstructure and Mechanical Properties of Grade 91 Steel A-TIG Weld Joint, J. Mater. Eng. Perform., 2013, 22(12), p 3708–3716CrossRef B. Arivazhagan and M. Vasudevan, A Study of Microstructure and Mechanical Properties of Grade 91 Steel A-TIG Weld Joint, J. Mater. Eng. Perform., 2013, 22(12), p 3708–3716CrossRef
7.
Zurück zum Zitat K.C. Ganesh, K.R. Balasubramanian, M. Vasudevan, P. Vasantharaja, and N. Chandrasekhar, Effect of Multipass TIG and Activated TIG Welding Process on the Thermo-Mechanical Behavior of 316LN Stainless Steel Weld Joints, Metall. Mater. Trans. B, 2016, 47B, p 1347–1362CrossRef K.C. Ganesh, K.R. Balasubramanian, M. Vasudevan, P. Vasantharaja, and N. Chandrasekhar, Effect of Multipass TIG and Activated TIG Welding Process on the Thermo-Mechanical Behavior of 316LN Stainless Steel Weld Joints, Metall. Mater. Trans. B, 2016, 47B, p 1347–1362CrossRef
8.
Zurück zum Zitat P. Palanichamy, M. Vasudevan, and T. Jayakumar, Measurement of Residual Stresses in Austenitic Stainless Steel Weld Joints Using an Ultrasonic Technique, Sci. Technol. Weld. Join., 2009, 14(2), p 166–171CrossRef P. Palanichamy, M. Vasudevan, and T. Jayakumar, Measurement of Residual Stresses in Austenitic Stainless Steel Weld Joints Using an Ultrasonic Technique, Sci. Technol. Weld. Join., 2009, 14(2), p 166–171CrossRef
9.
Zurück zum Zitat P. Vasantharaja, V. Maduraimuthu, M. Vasudevan, and P. Palanichamy, Assessment of Residual Stresses and Distortion in Type 316 LN Stainless Steel Weld Joints, Mater. Manuf. Process., 2012, 27(12), p 1376–1381CrossRef P. Vasantharaja, V. Maduraimuthu, M. Vasudevan, and P. Palanichamy, Assessment of Residual Stresses and Distortion in Type 316 LN Stainless Steel Weld Joints, Mater. Manuf. Process., 2012, 27(12), p 1376–1381CrossRef
10.
Zurück zum Zitat N.N. Korra, M. Vasudevan, and K.R. Balasubramanian, Multi-Objective Optimization of Activated Tungsten Inert Gas Welding of Duplex Stainless Steel Using Response Surface Methodology, Int. J. Adv. Manuf. Technol., 2015, 77(1–4), p 67–81CrossRef N.N. Korra, M. Vasudevan, and K.R. Balasubramanian, Multi-Objective Optimization of Activated Tungsten Inert Gas Welding of Duplex Stainless Steel Using Response Surface Methodology, Int. J. Adv. Manuf. Technol., 2015, 77(1–4), p 67–81CrossRef
11.
Zurück zum Zitat S. Tathgir and A. Bhattacharya, Activated-TIG Welding of Different Steels: Influence of Various Flux and Shielding Gas, Mater Manuf. Process., 2016, 31(3), p 1–23CrossRef S. Tathgir and A. Bhattacharya, Activated-TIG Welding of Different Steels: Influence of Various Flux and Shielding Gas, Mater Manuf. Process., 2016, 31(3), p 1–23CrossRef
12.
Zurück zum Zitat S. Tathgir, A. Bhattacharya, and T.K. Ber, Influence of Current and Shielding Gas in TiO2 Flux Activated TIG Welding on Different Graded Steels, Mater. Manuf. Process., 2014, 30(9), p 1–25 S. Tathgir, A. Bhattacharya, and T.K. Ber, Influence of Current and Shielding Gas in TiO2 Flux Activated TIG Welding on Different Graded Steels, Mater. Manuf. Process., 2014, 30(9), p 1–25
13.
Zurück zum Zitat T. Shyi Chern, K. Hung Tseng, and H. Lung Tsai, Study of the Characteristics of Duplex Stainless Steel Activated Tungsten Inert Gas Welds, Mater. Des., 2011, 32(1), p 255–263CrossRef T. Shyi Chern, K. Hung Tseng, and H. Lung Tsai, Study of the Characteristics of Duplex Stainless Steel Activated Tungsten Inert Gas Welds, Mater. Des., 2011, 32(1), p 255–263CrossRef
14.
Zurück zum Zitat A. Berthier, P. Paillard, and F. Christien, Structural and Chemical Evolution of Super Duplex Stainless Steel on Activated Tungsten Inert Gas Welding Process, Sci. Technol. Weld. Join., 2009, 14(8), p 681–690CrossRef A. Berthier, P. Paillard, and F. Christien, Structural and Chemical Evolution of Super Duplex Stainless Steel on Activated Tungsten Inert Gas Welding Process, Sci. Technol. Weld. Join., 2009, 14(8), p 681–690CrossRef
15.
Zurück zum Zitat L. Wickstrom, G. Hinds, and A. Turnbull, Influence of Weld Preparation Procedure and Heat Tinting on Sulfide Stress Corrosion Cracking of Duplex Stainless Steel, Corros, 2015, 71(8), p 1036–1047CrossRef L. Wickstrom, G. Hinds, and A. Turnbull, Influence of Weld Preparation Procedure and Heat Tinting on Sulfide Stress Corrosion Cracking of Duplex Stainless Steel, Corros, 2015, 71(8), p 1036–1047CrossRef
16.
Zurück zum Zitat B. Messer, V. Oprea, and A. Wright, Duplex Stainless Steel Welding: Best Practices, Stainl. Steel World, 2007, 12, p 53–63 B. Messer, V. Oprea, and A. Wright, Duplex Stainless Steel Welding: Best Practices, Stainl. Steel World, 2007, 12, p 53–63
17.
Zurück zum Zitat C.T. Kwok, K.H. Lo, W.K. Chan, Stress Corrosion Cracking of Laser-Welded Stainless Steels, in Proceedings of the Ist International Joint Symposium on Joining and Welding, Osaka, Japan, ed. by H. Fujii (Wood head publishing, Cambridge), 6–8 Nov 2013 C.T. Kwok, K.H. Lo, W.K. Chan, Stress Corrosion Cracking of Laser-Welded Stainless Steels, in Proceedings of the Ist International Joint Symposium on Joining and Welding, Osaka, Japan, ed. by H. Fujii (Wood head publishing, Cambridge), 6–8 Nov 2013
18.
Zurück zum Zitat A. Bhattacharya and P.M. Singh, Stress Corrosion Cracking of Welded 2205 Duplex Stainless Steel in Sulfide-Containing Caustic Solution, J. Fail. Anal. Prev., 2005, 7(5), p 371–377CrossRef A. Bhattacharya and P.M. Singh, Stress Corrosion Cracking of Welded 2205 Duplex Stainless Steel in Sulfide-Containing Caustic Solution, J. Fail. Anal. Prev., 2005, 7(5), p 371–377CrossRef
19.
Zurück zum Zitat T. Prosek, A.L. Gac, D. Thierry, S.L. Manchet, C. Lojewski, A. Fanica, E. Johansson, C. Canderyd, F. Dupoiron, T. Snauwaert, F. Maas, and B. Droesbeke, Low-Temperature Stress Corrosion Cracking of Austenitic and Duplex Stainless Steels Under Chloride Deposits, Corros, 2014, 70(10), p 1052–1063CrossRef T. Prosek, A.L. Gac, D. Thierry, S.L. Manchet, C. Lojewski, A. Fanica, E. Johansson, C. Canderyd, F. Dupoiron, T. Snauwaert, F. Maas, and B. Droesbeke, Low-Temperature Stress Corrosion Cracking of Austenitic and Duplex Stainless Steels Under Chloride Deposits, Corros, 2014, 70(10), p 1052–1063CrossRef
20.
Zurück zum Zitat S.S.M. Tavares, V.G. Silva, J.M. Pardal, and J.S. Corte, Investigation of Stress Corrosion Cracks in a UNS S32750 Superduplex Stainless Steel, Eng. Fail. Anal., 2013, 35, p 88–94CrossRef S.S.M. Tavares, V.G. Silva, J.M. Pardal, and J.S. Corte, Investigation of Stress Corrosion Cracks in a UNS S32750 Superduplex Stainless Steel, Eng. Fail. Anal., 2013, 35, p 88–94CrossRef
21.
Zurück zum Zitat D. Fischer, C. Li, W. Huang, W. Sun, Investigation of the Sulfide Stress Cracking and Stress Corrosion Cracking Behaviors of Duplex and Lean Duplex Stainless Steel Parent and Welded Materials in Sour Service (Conference Paper), in NACE—International Corrosion Conference Series, Vancouver, Canada, vol. 2, pp. 1572–1583, 6–10 Mar 2016 D. Fischer, C. Li, W. Huang, W. Sun, Investigation of the Sulfide Stress Cracking and Stress Corrosion Cracking Behaviors of Duplex and Lean Duplex Stainless Steel Parent and Welded Materials in Sour Service (Conference Paper), in NACE—International Corrosion Conference Series, Vancouver, Canada, vol. 2, pp. 1572–1583, 6–10 Mar 2016
22.
Zurück zum Zitat M. Sakata, N. Satake, T. Kiso, U.B. Ofem, Study on Ferrite Content and Hardness of Thick-Wall 22% Cr Duplex Stainless Steel Welded Joints, in NACE—International Corrosion Conference Series, Vancouver, Canada, vol. 4, pp. 2609–2624, 26–30 Mar 2017 M. Sakata, N. Satake, T. Kiso, U.B. Ofem, Study on Ferrite Content and Hardness of Thick-Wall 22% Cr Duplex Stainless Steel Welded Joints, in NACE—International Corrosion Conference Series, Vancouver, Canada, vol. 4, pp. 2609–2624, 26–30 Mar 2017
23.
Zurück zum Zitat M. Vasudevan, Effect of A-TIG Welding Process on the Weld Attributes of Type 304LN and 316LN Stainless Steels, J. Mater. Eng. Perform., 2017, 26(3), p 1325–1336CrossRef M. Vasudevan, Effect of A-TIG Welding Process on the Weld Attributes of Type 304LN and 316LN Stainless Steels, J. Mater. Eng. Perform., 2017, 26(3), p 1325–1336CrossRef
24.
Zurück zum Zitat N.N. Korra, M. Vasudevan, and K.R. Balasubramanian, Optimization of ATIG Welding of Duplex Stainless Steel Alloy 2205 Based on Response Surface Methodology and Experimental Validation, J. Mater. Des. Appl., 2016, 30(4), p 837–846 N.N. Korra, M. Vasudevan, and K.R. Balasubramanian, Optimization of ATIG Welding of Duplex Stainless Steel Alloy 2205 Based on Response Surface Methodology and Experimental Validation, J. Mater. Des. Appl., 2016, 30(4), p 837–846
25.
Zurück zum Zitat M. Keskitalo, K. Mäntyjärvi, J. Sundqvist, J. Powell, and A.F.H. Kaplan, Laser Welding of Duplex Stainless Steel with Nitrogen as Shielding Gas, J. Mater. Process. Technol., 2015, 216(2), p 381–384CrossRef M. Keskitalo, K. Mäntyjärvi, J. Sundqvist, J. Powell, and A.F.H. Kaplan, Laser Welding of Duplex Stainless Steel with Nitrogen as Shielding Gas, J. Mater. Process. Technol., 2015, 216(2), p 381–384CrossRef
26.
Zurück zum Zitat V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Weld Metal Chemistry and Heat Input on the Structure and Properties of Duplex Stainless Steel Welds, Mater. Sci. Eng. A, 2003, 358(1–2), p 9–16CrossRef V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Weld Metal Chemistry and Heat Input on the Structure and Properties of Duplex Stainless Steel Welds, Mater. Sci. Eng. A, 2003, 358(1–2), p 9–16CrossRef
27.
Zurück zum Zitat S. Geng, J. Sun, L. Guo, and H. Wang, Evolution of Microstructure and Corrosion Behavior in 2205 Duplex Stainless Steel GTA-Welding Joint, J. Manuf. Process, 2015, 19(8), p 32–37CrossRef S. Geng, J. Sun, L. Guo, and H. Wang, Evolution of Microstructure and Corrosion Behavior in 2205 Duplex Stainless Steel GTA-Welding Joint, J. Manuf. Process, 2015, 19(8), p 32–37CrossRef
28.
Zurück zum Zitat R. Nishimura and K. Kudo, Stress Corrosion Cracking of AISI, 304 an AISI, 316 Austenitic Stainless Steels in HCl and H2SO4 Solutions —Prediction of Time-to-Failure and Criterion for Assessment of SCC Susceptibility, Corros, 1989, 45(4), p 308–316CrossRef R. Nishimura and K. Kudo, Stress Corrosion Cracking of AISI, 304 an AISI, 316 Austenitic Stainless Steels in HCl and H2SO4 Solutions —Prediction of Time-to-Failure and Criterion for Assessment of SCC Susceptibility, Corros, 1989, 45(4), p 308–316CrossRef
29.
Zurück zum Zitat R. Nishimura, A. Sulaiman, and Y. Maeda, Stress Corrosion Cracking Susceptibility of Sensitized Type 316 Stainless Steel in Sulfuric Acid Solution, Corros. Sci., 2003, 45(2), p 465–484CrossRef R. Nishimura, A. Sulaiman, and Y. Maeda, Stress Corrosion Cracking Susceptibility of Sensitized Type 316 Stainless Steel in Sulfuric Acid Solution, Corros. Sci., 2003, 45(2), p 465–484CrossRef
30.
Zurück zum Zitat L. Vehovar, A. Vehovar, M.V. Hukovic, and M. Tandler, Investigation into Stress Corrosion Cracking of Stainless Steel Alloyed with Nitrogen, Mater. Corros., 2002, 53(5), p 316–327CrossRef L. Vehovar, A. Vehovar, M.V. Hukovic, and M. Tandler, Investigation into Stress Corrosion Cracking of Stainless Steel Alloyed with Nitrogen, Mater. Corros., 2002, 53(5), p 316–327CrossRef
31.
Zurück zum Zitat O.M. Alyousif and R. Nishimura, The Stress Corrosion Cracking Behavior of Austenitic Stainless Steels in Boiling Magnesium Chloride Solutions, Corros. Sci., 2006, 49(7), p 3040–3051CrossRef O.M. Alyousif and R. Nishimura, The Stress Corrosion Cracking Behavior of Austenitic Stainless Steels in Boiling Magnesium Chloride Solutions, Corros. Sci., 2006, 49(7), p 3040–3051CrossRef
32.
Zurück zum Zitat J.M. Pardala, S.S.M. Tavares, M.P.C. Fonsecaa, J.D. Souzaa, L.M. Vieirab, and H.F.G. Abreuc, Deleterious Phases Precipitation on Superduplex Stainless Steel UNS S32750: Characterization by Light Optical and Scanning Electron Microscopy, Mater. Res, 2010, 13(3), p 401–407CrossRef J.M. Pardala, S.S.M. Tavares, M.P.C. Fonsecaa, J.D. Souzaa, L.M. Vieirab, and H.F.G. Abreuc, Deleterious Phases Precipitation on Superduplex Stainless Steel UNS S32750: Characterization by Light Optical and Scanning Electron Microscopy, Mater. Res, 2010, 13(3), p 401–407CrossRef
33.
Zurück zum Zitat V. Kumar, B. Lucas, D. Howse, G. Melton, S. Raghunathan, L. Vilarinho, Investigation of the A-TIG Mechanism and the Productivity Benefits in TIG Welding, in 15th International Conference on the Joining of Materials (JOM 15) and 6th International Conference on Education in Welding (ICEW 6) Helsingor, Denmark, 3–6 May 2009 V. Kumar, B. Lucas, D. Howse, G. Melton, S. Raghunathan, L. Vilarinho, Investigation of the A-TIG Mechanism and the Productivity Benefits in TIG Welding, in 15th International Conference on the Joining of Materials (JOM 15) and 6th International Conference on Education in Welding (ICEW 6) Helsingor, Denmark, 3–6 May 2009
34.
Zurück zum Zitat R.H. Zhang, J. Pan, and S. Katayama, The Mechanism of Penetration Increase in A-TIG Welding, Front. Mater. Sci., 2011, 5(2), p 109–118CrossRef R.H. Zhang, J. Pan, and S. Katayama, The Mechanism of Penetration Increase in A-TIG Welding, Front. Mater. Sci., 2011, 5(2), p 109–118CrossRef
35.
Zurück zum Zitat A. Berthier, P. Paillard, M. Carin, S. Pellerin, and F. Valensi, TIG and A-TIG Welding Experimental Investigations and Comparison with Simulation Part 2—Arc Constriction and Arc Temperature, Sci. Technol. Weld. Join., 2012, 17(8), p 616–621CrossRef A. Berthier, P. Paillard, M. Carin, S. Pellerin, and F. Valensi, TIG and A-TIG Welding Experimental Investigations and Comparison with Simulation Part 2—Arc Constriction and Arc Temperature, Sci. Technol. Weld. Join., 2012, 17(8), p 616–621CrossRef
36.
Zurück zum Zitat A. Berthier, P. Paillard, M. Carin, F. Valensi, and S. Pellerin, TIG and A-TIG Welding Experimental Investigations and Comparison to Simulation Part 1: Identification of Marangoni Effect, Sci. Technol. Weld. Join., 2012, 17(8), p 609–615CrossRef A. Berthier, P. Paillard, M. Carin, F. Valensi, and S. Pellerin, TIG and A-TIG Welding Experimental Investigations and Comparison to Simulation Part 1: Identification of Marangoni Effect, Sci. Technol. Weld. Join., 2012, 17(8), p 609–615CrossRef
37.
Zurück zum Zitat T.J. Donegá, T.F. Costa, R.V. Arencibia, and L.O. Vilarinho, Comparison of Thermal Efficiency Between A-TIG and Conventional TIG Welding, Weld. Inter., 2016, 30(4), p 255–267CrossRef T.J. Donegá, T.F. Costa, R.V. Arencibia, and L.O. Vilarinho, Comparison of Thermal Efficiency Between A-TIG and Conventional TIG Welding, Weld. Inter., 2016, 30(4), p 255–267CrossRef
38.
Zurück zum Zitat P.J. Antony, R.K. Singh Raman, P. Kumar, and R. Raman, Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria, Metall. Mater. Trans. A, 2008, 39A(11), p 2689–2697CrossRef P.J. Antony, R.K. Singh Raman, P. Kumar, and R. Raman, Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria, Metall. Mater. Trans. A, 2008, 39A(11), p 2689–2697CrossRef
39.
Zurück zum Zitat A. Corolleur, A. Fanica, and G. Passot, Ferrite Content in the Heat Affected Zone of Duplex Stainless Steels, BHM Bergund Hüttenmännische Monatshefte, 2015, 160(9), p 413–418CrossRef A. Corolleur, A. Fanica, and G. Passot, Ferrite Content in the Heat Affected Zone of Duplex Stainless Steels, BHM Bergund Hüttenmännische Monatshefte, 2015, 160(9), p 413–418CrossRef
40.
Zurück zum Zitat H. Sieurin and R. Sandström, Austenite Reformation in the Heat-Affected Zone of Duplex Stainless Steel 2205, Mater. Sci. Eng. A, 2006, 418(1–2), p 250–256CrossRef H. Sieurin and R. Sandström, Austenite Reformation in the Heat-Affected Zone of Duplex Stainless Steel 2205, Mater. Sci. Eng. A, 2006, 418(1–2), p 250–256CrossRef
41.
Zurück zum Zitat R.A. Cottis and R.C. Newman, Stress corrosion cracking resistance of duplex stainless steels, Corrosion and Protection Centre, Manchester, 1993 R.A. Cottis and R.C. Newman, Stress corrosion cracking resistance of duplex stainless steels, Corrosion and Protection Centre, Manchester, 1993
42.
Zurück zum Zitat H.Y. Liou, R.I. Hsieh, and W.T. Tsai, Microstructure and Stress Corrosion Cracking in Simulated Heat-Affected Zones of Duplex Stainless Steels, Corros. Sci., 2002, 44(12), p 2841–2856CrossRef H.Y. Liou, R.I. Hsieh, and W.T. Tsai, Microstructure and Stress Corrosion Cracking in Simulated Heat-Affected Zones of Duplex Stainless Steels, Corros. Sci., 2002, 44(12), p 2841–2856CrossRef
43.
Zurück zum Zitat H.-Y. Liou, Y.-T. Pan, R.-I. Hsieh, and W.-T. Tsai, Effects of Alloying Elements on the Mechanical Properties and Corrosion Behaviors of 2205 Duplex Stainless Steels, JMEPEG, 2001, 10, p 231–241CrossRef H.-Y. Liou, Y.-T. Pan, R.-I. Hsieh, and W.-T. Tsai, Effects of Alloying Elements on the Mechanical Properties and Corrosion Behaviors of 2205 Duplex Stainless Steels, JMEPEG, 2001, 10, p 231–241CrossRef
44.
Zurück zum Zitat T.G. Gooch, Corrosion Resistance of Welds in Stainless Steel, Weld. J., 1996, 5, p 135s–154s T.G. Gooch, Corrosion Resistance of Welds in Stainless Steel, Weld. J., 1996, 5, p 135s–154s
45.
Zurück zum Zitat J. Yang, Q. Wang, Z. Wei, and K. Guan, Weld Failure Analysis of 2205 Duplex Stainless Steel Nozzle, Cas. Stu. Eng. Fail. Anal., 2014, 2(2), p 69–75CrossRef J. Yang, Q. Wang, Z. Wei, and K. Guan, Weld Failure Analysis of 2205 Duplex Stainless Steel Nozzle, Cas. Stu. Eng. Fail. Anal., 2014, 2(2), p 69–75CrossRef
46.
Zurück zum Zitat C. Örnek, X. Zhong, and D.L. Engelberg, Low-Temperature Environmentally Assisted Cracking of Grade 2205 Duplex Stainless Steel Beneath a MgCl2:FeCl3 Salt Droplet, Corros, 2016, 72(3), p 384–399CrossRef C. Örnek, X. Zhong, and D.L. Engelberg, Low-Temperature Environmentally Assisted Cracking of Grade 2205 Duplex Stainless Steel Beneath a MgCl2:FeCl3 Salt Droplet, Corros, 2016, 72(3), p 384–399CrossRef
Metadaten
Titel
Assessment of Stress Corrosion Cracking Resistance of Activated Tungsten Inert Gas-Welded Duplex Stainless Steel Joints
verfasst von
B. Alwin
A. K. Lakshminarayanan
M. Vasudevan
P. Vasantharaja
Publikationsdatum
13.11.2017
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 12/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-017-3057-0

Weitere Artikel der Ausgabe 12/2017

Journal of Materials Engineering and Performance 12/2017 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.