nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

16. Automobile Applications of Mechanically Alloyed Magnesium and Titanium Material

verfasst von : Gangadhar M. Kanaginahal, M. C. Kiran, Kiran Shahapurkar, Rayappa Srinivas Mahale, Prashant Kakkamari

Erschienen in: Mechanically Alloyed Novel Materials

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter intricately examines the pivotal role played by magnesium and titanium alloys in the sphere of automotive part fabrication. It meticulously dissects their distinctive attributes, spotlighting their innate lightweight composition and unparalleled robustness, attributes that fundamentally elevate vehicular performance and operational efficacy. Through an in-depth exploration of the singular merits of these alloys and the symbiotic advantages derived from their amalgamation, the chapter accentuates their formidable resistance to corrosion, thermal steadfastness, and mechanical prowess, all pivotal facets in the realm of sustainable automotive design. Furthermore, the chapter critically evaluates the impediments inherent in manufacturing these alloys and the pioneering methodologies devised to optimize their efficacy within the automotive domain. By spotlighting tangible case studies, it elucidates how these alloys seamlessly fortify vehicular structures while substantially alleviating weight burdens, thereby significantly augmenting fuel efficiency. Additionally, the chapter contemplates the economic and environmental ramifications attendant upon the deployment of these cutting-edge materials, underscored by their potential to revolutionize the industry, fostering sustainability and resource maximization. This comprehensive elucidation of magnesium and titanium alloyed materials serves as an imperatival conduit for future exploration and innovation, proffering inspiration for extensive integration within automotive frameworks, thereby steering the industry towards pioneering, efficient, and ecologically cognizant design paradigms.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Mechanical Alloying of Super Alloys Like High-Entropy Alloys and Smart Materials

Nächstes Kapitel Energy Storage Applications of Mechanically Alloyed Materials Supercapacitors, Battery Applications

Tun, K.S., Kumar, A., Gupta, M.: Introducing a high performance Mg-based multicomponent alloy as an alternative to Al-alloys. Front Mater 6, 1–6 (2019). https://doi.org/10.3389/fmats.2019.00215CrossRef

Ravikanth Reddy, C., Satya Prasad, K., Srinivasarao, B.: Microstructure and mechanical properties of Mg–Ni–Gd alloy synthesised by powder metallurgy. Powder Metall. 66, 270–277 (2023). https://doi.org/10.1080/00325899.2022.2163553CrossRef

Sharma, S.K., Saxena, K.K., Malik, V., Mohammed, K.A., Prakash, C., Buddhi, D., Dixit, S.: Significance of alloying elements on the mechanical characteristics of Mg-based materials for biomedical applications. Crystals 12, 1–40 (2022). https://doi.org/10.3390/cryst12081138CrossRef

Loukil, N.: Alloying elements of magnesium alloys: A literature review. In: Magnesium Alloys, pp 1–11 (2016)

Zhang, W., Xu, J.: Advanced lightweight materials for automobiles: a review. Mater. Des. 221, 1–20 (2022). https://doi.org/10.1016/j.matdes.2022.110994CrossRef

Guan, D.: Processing, microstructure and mechanical behavior of bulk nanostructured Mg alloy (2015)

Giridasappa, A., Kiran, K.K., Rajendrachari, S.: Nanotechnology and their evaluation of Bi-functional applications. J. Metastable Nanocrystalline Mater. 37, 33–43 (2023). https://doi.org/10.4028/p-dKORv2

Rajendrachari, S.: An overview of high-entropy alloys prepared by mechanical alloying followed by the characterization of their microstructure and various properties. Alloys 1, 116–132 (2022). https://doi.org/10.3390/alloys1020008CrossRef

Rajendrachari, S., Shatokha, V., Avar, B.: New Advances in Powder Technology (2023)

10.

Rajendrachari, S., Adimule, V., Gulen, M., Khosravi, F., Somashekharappa, K.K.: Synthesis and characterization of high entropy alloy 23Fe–21Cr–18Ni–20Ti–18Mn for electrochemical sensor applications. Materials (Basel) 15, 1–12 (2022). https://doi.org/10.3390/ma15217591CrossRef

11.

Seth, P.P., Parkash, O., Kumar, D.: Structure and mechanical behavior of in situ developed Mg2Si phase in magnesium and aluminum alloys—A review. RSC Adv. 10, 37327–37345 (2020). https://doi.org/10.1039/d0ra02744hCrossRefPubMedPubMedCentral

12.

Kanaginahal, G.M., Mahale, R.S., Vasanth, S., Sharath, P.C., Shashanka, R.: Studies on dielectric, super-capacitive and photoluminescence properties of metal organic frameworks subjected to varying temperature and frequencies. Nano Hybrids Compos. 39, 17–25 (2023). https://doi.org/10.4028/p-si6964

13.

Salleh, E.M., Ramakrishnan, S., Hussain, Z.: Synthesis of biodegradable Mg–Zn alloy by mechanical alloying: effect of milling time. Procedia Chem. 19, 525–530 (2016). https://doi.org/10.1016/j.proche.2016.03.048CrossRef

14.

Mahale, R.S., Kanaginahal, G.M., Vasanth, S., Tiwary, V.K., Shashanka, R., Sharath, P.C., Patil, A.: Applications of fused deposition modeling in dentistry. In: Keshavamurthy, R., Tambrallimath, V., Davim, J.P. (eds.) Development, Properties, and Industrial Applications of 3D Printed Polymer Composites, pp. 211–219. IGI Global, Hershey, Pennsylvania (2023)

15.

Shashanka, R.: Synthesis of nano-structured stainless steel powder by mechanical alloying-an overview. Int. J. Sci. Eng. Res. 8, 588–594 (2017)

16.

Nečas, D., Marek, I., Pinc, J., Vojtěch, D., Kubásek, J.: Advanced Zinc–Magnesium alloys prepared by mechanical alloying and spark plasma sintering. Materials (Basel) 15, 1–17 (2022). https://doi.org/10.3390/ma15155272CrossRef

17.

Rajendrachari, S., Adimule, V.M., Jayaprakash, G.K., Pandith, A.: Electrochemical oxidation of methylene blue dye in wastewater using mechanically alloyed high entropy alloy modified carbon paste electrode using cyclic voltammetry. Mater. Res. Express 10, 1–13 (2023). https://doi.org/10.1088/2053-1591/acd3d7CrossRef

18.

Pradeep, N., Hegde, M.R., Rajendrachari, S., Surendranathan, A.: Investigation of microstructure and mechanical properties of microwave consolidated TiMgSr alloy prepared by high energy ball milling. Powder Technol. 408, 1–15 (2022). https://doi.org/10.1016/j.powtec.2022.117715CrossRef

19.

Basavarajappa, P.N., Hegde, M.M.R., Rajendrachari, S., Surendranathan, A.O.: Investigation of structural and mechanical properties of nanostructured TiMgSr alloy for biomedical applications. Biointerface Res. Appl. Chem. 13, 1–18 (2023). https://doi.org/10.33263/BRIAC132.118

20.

Gonzaga, S., Molina, A., Guardián, R., Martínez, H., Vélez, E.V., Tapia, J.S.O.: Synthesis of Magnesium-based alloys by mechanical alloying for implant applications. Coatings 13, 1–15 (2023). https://doi.org/10.3390/coatings13020260CrossRef

21.

Rajendrachari, S., Basavegowda, N., Vinaykumar, R., Narsimhachary, D., Somu, P., Lee, M.-J.: Electrocatalytic determination of methyl orange dye using mechanically alloyed novel metallic glass modified carbon paste electrode by cyclic voltammetry. Inorg. Chem. Commun. 155, 1–13 (2023). https://doi.org/10.1016/j.inoche.2023.111010CrossRef

22.

Kane, S.N., Mishra, A., Dutta, A.K.: Microstructure and mechanical properties of the as-cast Mg–Zn–Mn–Ca alloys. J. Phys. Conf. Ser. 755 (2016). https://doi.org/10.1088/1742-6596/755/1/011001

23.

Ramakrishna, D., Saravu, S., Rajendrachari, S.: A palladium complex dispersed in ionic liquid as an efficient catalytic combination for the synthesis of Benzazoles. Top. Catal. 65, 1–12 (2022). https://doi.org/10.1007/s11244-021-01554-6CrossRef

24.

Li, Y., Yuan, Y., Wang, J., Wu, L., Cao, F., Zhang, L., Pan, F.: Controllable degradation behavior of Mg–Sr–Y alloys for the bio-applications. NPJ Mater. Degrad. 7 (2023). https://doi.org/10.1038/s41529-023-00366-1

25.

Mahale, R.S., Vasanth, S., Chikkegouda, S.P., Rajendrachari, S., Narsimhachary, D., Basavegowda, N.: Electrochemical determination of ascorbic acid by mechanically alloyed super duplex stainless steel powders. Metals (Basel) 13, 1–14 (2023). https://doi.org/10.3390/met13081430CrossRef

26.

Mahale, R.S., Shaygan, S., Attaeyan, A., Vasanth, S., Krishna, H., Sharath, P., Shashanka, R., Malekipour, M., Ghorbani, A., Prasad, H., Ghaffari, Y.: A Brief review of the structure designed using metallic 3D printing for biomechanics applications. In: Additive Manufacturing for Biocomposites and Synthetic Composites, pp. 120–137 (2023)

27.

Esamael, S.K., Fatalla, A.A.: Analysis of effect of alloying Magnesium by powder metallurgy on mechanical properties: review. J. Res. Med. Dent. Sci. 9, 100–106 (2021)

28.

Adimule, V., Keri, R., Rajendrachari, S., Kendrekar, P., Kulkarni, C.V.: Highly photoluminescence and wide band gap insulating metal hybrid nanoparticles array of samarium-doped SrO:CoO: synthesis, characterizations and sensor characteristics. J. Mater. Sci. Mater. Electron. 34 (2023). https://doi.org/10.1007/s10854-023-09899-2

29.

Halfadji, A., Naous, M., Rajendrachari, S., Ceylan, Y., Ceylan, K.B., Shekar, P.R.: Effective investigation of electro-catalytic, photocatalytic, and antimicrobial properties of porous CuO nanoparticles green synthesized using leaves of Cupressocyparis leylandii. J. Mol. Struct. 1–14 (2023). https://doi.org/10.1016/j.molstruc.2023.137318

30.

Hrapkowiczk, B., Lesz, S., Kremzer, M., Karolus, M., Pakieła, W.: Mechanical alloying of Mg–Zn–Ca–Er alloy. Bull. Polish Acad. Sci. Tech. Sci. 69, 1–8 (2021). https://doi.org/10.24425/bpasts.2021.137587

31.

Adimule, V., Shashanka, R.: Dielectric, Supercapacitive, Photoluminescent Properties of Hybrid Metal Organic Frameworks (2023)

32.

Zhu, S.-S., Kan, H.-M., Feng, X.-J., Zhang, N., Sun, H.: The preparation method of aluminum-magnesium alloys. 299–305 (2016). https://doi.org/10.2991/ame-16.2016.50

33.

Patil, A., Nithin, S., Krishna, H., Vasanth, S., Shrinivas, R., Mahale, S.P., Rajendrachari, S.: Investigation of wear behavior for three-body made of CA-40 steel and nickel hard cast iron by abrasion method. AIP Conf. Proc. 2901, 1–15 (2023). https://doi.org/10.1063/5.0178634CrossRef

34.

Liu, C., Ren, Z., Xu, Y., Pang, S., Zhao, X., Zhao, Y.: Biodegradable magnesium alloys developed as bone repair materials: a review. Scanning 2018 (2018). https://doi.org/10.1155/2018/9216314

35.

Halfadji, A., Naous, M., nadia Kharroubi, K., el zahraà Belmehdi, F., Rajendrachari, S.: An ultrasonic-assisted synthesis, characterization, and application of Nano-Fe3O4/TiO2 as nano-catalyst for the removal of organic dye by Like-Photo-Fenton reactions. Inorg. Chem. Commun. 158, 1–15 (2023). https://doi.org/10.1016/j.inoche.2023.111686

36.

Zhou, H., Hu, L., Sun, Y., Zhang, H., Duan, C., Yu, H.: Synthesis of nanocrystalline AZ31 magnesium alloy with titanium addition by mechanical milling. Mater. Charact. 113, 108–116 (2016). https://doi.org/10.1016/j.matchar.2016.01.014CrossRef

37.

Rajendrachari, S., Arslanoglu, H., Yaras, A., Golabhanvi, S.M.: Electrochemical detection of uric acid based on a carbon paste electrode modified with Ta2O5 recovered from ore by a novel method. ACS Omega 8, 46946–46954 (2023). https://doi.org/10.1021/acsomega.3c06749CrossRefPubMedPubMedCentral

38.

Halfadji, A., Chougui, A., Djeradi, R., Ouabad, F.Z., Aoudia, H., Rajendrachari, S.: TiO2-decorated by nano-γ-Fe2O3 as a catalyst for efficient photocatalytic degradation of orange G dye under eco-friendly white LED irradiation. ACS Omega 8, 39907–39916 (2023). https://doi.org/10.1021/acsomega.3c06420CrossRefPubMedPubMedCentral

39.

Liu, B., Yang, J., Zhang, X., Yang, Q., Zhang, J., Li, X.: Development and application of magnesium alloy parts for automotive OEMs: a review. J. Magnes. Alloy 11, 15–47 (2023). https://doi.org/10.1016/j.jma.2022.12.015CrossRef

40.

Thiagarajan, C., Lakshminarayanan, N., Anand, A., Nikhil Santhosh, M., Anderson, N.J.: Investigation and analysis of properties of magnesium alloy for suitability to electric vehicle components. IOP Conf. Ser. Mater. Sci. Eng. 993 (2020). https://doi.org/10.1088/1757-899X/993/1/012007

41.

Yoon, J., Lee, S.I.: Warm forging of magnesium AZ80 alloy for the control arm in an automobile. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 229, 1732–1738 (2015). https://doi.org/10.1177/0954407014567909CrossRef

42.

Kulekci, M.K.: Magnesium and its alloys applications in automotive industry. Int. J. Adv. Manuf. Technol. 39, 851–865 (2008). https://doi.org/10.1007/s00170-007-1279-2CrossRef

43.

Benjamin, J.S., Co, A.: Mechanical alloying—A perspective. Met. Powder Rep. 45, 122–127 (1990). https://doi.org/10.1016/S0026-0657(10)80124-9CrossRef

44.

Gilman, P.S., Benjamin, J.S.: Mechanical alloying. Annu. Rev. Mater. Sci. 13, 279–300 (1983)CrossRef

45.

Kim, Y.G., Merrick, H.F.: Characterization of an oxide dispersion strengthened superalloy, MA-6000E, for turbine blade applications (1979)

46.

Cardarelli, F.: Less Common Nonferrous Metals. Springer, Cham, Switzerland (2008)

47.

Balazic, M., Kopac, J., Jackson, M.J., Ahmed, W.: Review: titanium and titanium alloy applications in medicine. Int. J. Nano Biomater. 1, 3–34 (2007). https://doi.org/10.1504/IJNBM.2007.016517CrossRef

48.

Eylon, D., Fujishiro, S., Postans, P.J., Froes, F.H.: High-temperature titanium alloys—A review. JOM 55–62 (1984)

49.

Peters, B.M., Kumpfert, J., Ward, C.H., Leyens, C.: Titanium alloys for aerospace applications. Adv. Eng. Mater. 5, 419–427 (2003). https://doi.org/10.1002/adem.200310095CrossRef

50.

Pio, E., Medina, A., Mart, C., Manuel, F., Cerda, C.: Evolution of face-centered cubic Ti alloys transformation by X-ray diffraction profile analysis in mechanical alloying. Metals (Basel) 11, 1–17 (2021). https://doi.org/10.3390/met11111841CrossRef

51.

Zhou, Y., Niinomi, M., Akahori, T., Nakai, M., Fukui, H.: Comparison of various properties between titanium-tantalum alloy and pure titanium for biomedical applications. Mater. Trans. 48, 380–384 (2007). https://doi.org/10.2320/matertrans.48.380CrossRef

52.

Zhang, L., Chen, L.: A review on biomedical titanium alloys: recent progress and prospect. Adv. Eng. Mater. 21, 1–29 (2019). https://doi.org/10.1002/adem.201801215CrossRef

53.

Zhou, Y.L., Niinomi, M., Akahori, T.: Effects of Ta content on Young’s modulus and tensile properties of binary Ti–Ta alloys for biomedical applications. Mater. Sci. Eng. 371, 283–290 (2004). https://doi.org/10.1016/j.msea.2003.12.011CrossRef

54.

Geetha, M., Singh, A.K., Asokamani, R., Gogia, A.K.: Ti based biomaterials, the ultimate choice for orthopaedic implants—A review. Prog. Mater. Sci. 54, 397–425 (2009). https://doi.org/10.1016/j.pmatsci.2008.06.004CrossRef

55.

Alipal, J., Lee, T.C., Koshy, P., Abdullah, H.Z., Idris, M.I.: Evolution of anodised titanium for implant applications. Heliyon 7, e07408 (2021). https://doi.org/10.1016/j.heliyon.2021.e07408CrossRefPubMedPubMedCentral

56.

Sarraf, M., Rezvani, E., Saeid, G., Seeram, A., Nazatul, R., Sukiman, L.: A state of the art review of the fabrication and characteristics of titanium and its alloys for biomedical applications. Bio-Des. Manuf. 5, 371–395 (2022). https://doi.org/10.1007/s42242-021-00170-3CrossRef

57.

Hamweendo, A., Botef, I.: Modern production methods for titanium alloys: a review. In: Titanium Alloys-Novel Aspects of their Manufacturing and Processing, pp. 1–17 (2019)

58.

Weiss, I., Semiatin, S.L.: Thermomechanical processing of alpha titanium alloys—An overview. Mater. Sci. Eng. 263, 243–256 (1999)CrossRef

59.

Williams, J.C., Boyer, R.R.: Opportunities and issues in the application of titanium alloys for aerospace components. Metals (Basel) 10, 705 (2020). https://doi.org/10.3390/met10060705

60.

Tabie, V.M., Li, C., Saifu, W., Li, J., Xu, X.: Mechanical properties of near alpha titanium alloys for high-temperature applications—A review. Aircr. Eng. Aerosp. Technol. 92, 521–540 (2020). https://doi.org/10.1108/AEAT-04-2019-0086CrossRef

61.

Been, J., Faller, K., Eli, T.: Using Ti-5111 for marine fastener applications. JOM 51, 21–24 (1999)CrossRef

62.

Elahinia, M.H., Hashemi, M., Tabesh, M.: Progress in materials science manufacturing and processing of NiTi implants: a review. Prog. Mater. Sci. 57, 911–946 (2012). https://doi.org/10.1016/j.pmatsci.2011.11.001CrossRef

63.

Weiss, I., Semiatin, S.L.: Thermomechanical processing of beta titanium alloys—An overview. Mater. Sci. Eng. 243, 46–65 (1998)CrossRef

64.

Sidambe, A.T.: Biocompatibility of advanced manufactured titanium implants—A review. Materials (Basel) 7, 8168–8188 (2014). https://doi.org/10.3390/ma7128168CrossRefPubMedPubMedCentral

65.

Yang, R., Hao, Y., Li, S.: Development and application of low-modulus biomedical titanium alloy Ti2448. In: Biomedical Engineering: trends in Materials Science, pp. 1–25 (2014)

66.

Froes, F.H., Eylon, D.: Powder-metallurgy of titanium alloys. Int. Mater. Rev. 35, 162–184 (1990). https://doi.org/10.1179/095066090790323984CrossRef

67.

Alexandra, B., Hidalgo, A., Frykholm, R., Ebel, T., Pyczak, F.: Powder metallurgy strategies to improve properties and processing of titanium alloys: a review. Advanced 1–14 (2017). https://doi.org/10.1002/adem.201600743

68.

Neto, F.C., Giaretton, M.V., Neves, G.O., Aguilar, C., Tramontin Souza, M., Binder, C., Klein, A.N.: An overview of highly porous titanium processed via metal injection molding in combination with the space holder method. Metals (Basel) 12 (2022). https://doi.org/10.3390/met12050783

69.

Hamweendo, A., Malama, T., Botef, I.: Titanium-nickel alloys for bone tissue engineering application via cold titanium-nickel alloys for bone tissue engineering application. In: International Conference on Competitive Manufacturing COMA16, pp. 273–279 (2016)

70.

Sun, P., Fang, Z.Z., Zhang, Y., Xia, Y.: Review of the methods for production of spherical Ti and Ti alloy powder. JOM 69, 1853–1860 (2017). https://doi.org/10.1007/s11837-017-2513-5CrossRef

71.

Yolton, C.F., Froes, F.H.S.: Conventional Titanium Powder Production. Elsevier Inc. (2015)

72.

Vo, P., Goldbaum, D., Wong, W., Irissou, E., Legoux, J., Chromik, R.R., Yue, S.: Cold-Spray Processing of Titanium and Titanium Alloys. Elsevier Inc. (2015)

73.

Sivananth, V., Karuppusamy, P., Lingadurai, K.: Wear and corrosion behaviour of titanium carbide reinforced metal matrix composites for automobile brake disc application. Int. J. Mater. Eng. Innov. 10, 246–267 (2019). https://doi.org/10.1504/IJMATEI.2019.101970CrossRef

74.

Akinlabi, S.A., Ogbonna, O.S., Mashinini, P.M., Adediran, A.A., Fatoba, O.S., Akinlabi, E.T.: Titanium and epoxy for automobile application: a review. In: Proceedings of the Eighth International Conference on Advances Civil, Structural and Mechanical Engineering CSM 2019, pp. 48–58 (2019)

Titel: Automobile Applications of Mechanically Alloyed Magnesium and Titanium Material
verfasst von: Gangadhar M. Kanaginahal
M. C. Kiran
Kiran Shahapurkar
Rayappa Srinivas Mahale
Prashant Kakkamari
Verlag: Springer Nature Singapore
Buch: Mechanically Alloyed Novel Materials
Print ISBN: 978-981-9765-03-4

Electronic ISBN: 978-981-9765-04-1

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-981-97-6504-1_16

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht