Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 4/2017

13.01.2017

Bending Distortion Analysis of a Steel Shaft Manufacturing Chain from Cold Drawing to Grinding

verfasst von: Vinicius Waechter Dias, Alexandre da Silva Rocha, Juliana Zottis, Juan Dong, Jérémy Epp, Hans Werner Zoch

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 4/2017

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Shafts are usually manufactured from bars that are cold drawn, cut machined, induction hardened, straightened, and finally ground. The main distortion is characterized by bending that appears after induction hardening and is corrected by straightening and/or grinding. In this work, the consequence of the variation of manufacturing parameters on the distortion was analyzed for a complete manufacturing route for production of induction hardened shafts made of Grade 1045 steel. A DoE plan was implemented varying the drawing angle, cutting method, induction hardening layer depth, and grinding penetration depth. The distortion was determined by calculating curvature vectors from dimensional analysis by 3D coordinate measurements. Optical microscopy, microhardness testing, residual stress analysis, and FEM process simulation were used to evaluate and understand effects of the main carriers of distortion potential. The drawing process was identified as the most significant influence on the final distortion of the shafts.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat H W. Zoch: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 3–12. H W. Zoch: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 3–12.
2.
Zurück zum Zitat Rocha AS, Nunes RM, de Souza, TF, Soares CAT, Stephan H, Tekkaya AE, Hirsch TK.: 3rd Int. Conference on distortion engineering IDE, 2011, Bremen, Germany; pp. 229–38. Rocha AS, Nunes RM, de Souza, TF, Soares CAT, Stephan H, Tekkaya AE, Hirsch TK.: 3rd Int. Conference on distortion engineering IDE, 2011, Bremen, Germany; pp. 229–38.
3.
Zurück zum Zitat Rocha AS, Nunes RM, Hirsch TK.: Materials Research, 2012, v15, pp. 266–76.CrossRef Rocha AS, Nunes RM, Hirsch TK.: Materials Research, 2012, v15, pp. 266–76.CrossRef
4.
Zurück zum Zitat Hirsch TK, Rocha, AdaS, Nunes RM.: Metall. Mater. Trans. A 2013, 44A: 5806–16.CrossRef Hirsch TK, Rocha, AdaS, Nunes RM.: Metall. Mater. Trans. A 2013, 44A: 5806–16.CrossRef
5.
Zurück zum Zitat Rudnev V, Totten GE.: Handbook Volume 4C: Induction heating and heat treating, 2014. Rudnev V, Totten GE.: Handbook Volume 4C: Induction heating and heat treating, 2014.
6.
Zurück zum Zitat Surm H, Kessler O, Hoffmann F, Mayer P.: International Journal of Materials and Product Technology, 2005, 24(1–4), pp. 270–81.CrossRef Surm H, Kessler O, Hoffmann F, Mayer P.: International Journal of Materials and Product Technology, 2005, 24(1–4), pp. 270–81.CrossRef
7.
Zurück zum Zitat Frerichs F, Landek D, Lubben T, Hoffmann F, Zoch HW. : Materialwissenschaft und Werkstofftechnik, 2006, 37(1), pp. 63–68.CrossRef Frerichs F, Landek D, Lubben T, Hoffmann F, Zoch HW. : Materialwissenschaft und Werkstofftechnik, 2006, 37(1), pp. 63–68.CrossRef
8.
Zurück zum Zitat Dong J, Epp J, Rocha AS, Nunes RM, Zoch H-W, Wimpory R.: HTM J. Heat Treat. Mat, 2014, 69, pp. 348–59.CrossRef Dong J, Epp J, Rocha AS, Nunes RM, Zoch H-W, Wimpory R.: HTM J. Heat Treat. Mat, 2014, 69, pp. 348–59.CrossRef
9.
Zurück zum Zitat Soares CAT, Zottis J, Souza TF, Freitas LM, Colombo T, Rocha AS.: Estudos Tecnológicos em Engenharia, 2013; 9(2): pp. 54–62. Soares CAT, Zottis J, Souza TF, Freitas LM, Colombo T, Rocha AS.: Estudos Tecnológicos em Engenharia, 2013; 9(2): pp. 54–62.
10.
Zurück zum Zitat Prinz C, Hunkel M, Clausen B, Hoffmann, F, Zoch H-W: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 61–68 Prinz C, Hunkel M, Clausen B, Hoffmann, F, Zoch H-W: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 61–68
11.
Zurück zum Zitat Hunkel M.: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 399–410 Hunkel M.: Proceedings 2nd Int. Conf. on distortion engineering IDE, 2008, Bremen, Germany, pp. 399–410
12.
Zurück zum Zitat J. Dong, J. Epp, A. da S. Rocha, R. M. Nunes and H-W Zoch: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 2016, v 47A, pp. 877–88.CrossRef J. Dong, J. Epp, A. da S. Rocha, R. M. Nunes and H-W Zoch: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 2016, v 47A, pp. 877–88.CrossRef
13.
Zurück zum Zitat Rocha AS, Nunes RM, Metz M, Hirsch TK: Proceedings 2nd Int. Conf. On Distortion Engineering IDE, 2008, Bremen, Germany, pp. 3–12. Rocha AS, Nunes RM, Metz M, Hirsch TK: Proceedings 2nd Int. Conf. On Distortion Engineering IDE, 2008, Bremen, Germany, pp. 3–12.
Metadaten
Titel
Bending Distortion Analysis of a Steel Shaft Manufacturing Chain from Cold Drawing to Grinding
verfasst von
Vinicius Waechter Dias
Alexandre da Silva Rocha
Juliana Zottis
Juan Dong
Jérémy Epp
Hans Werner Zoch
Publikationsdatum
13.01.2017
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 4/2017
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-016-3948-y

Weitere Artikel der Ausgabe 4/2017

Metallurgical and Materials Transactions A 4/2017 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.