nach oben

Cellulose

Erschienen in:

20.05.2021 | Original Research

Biodegradable thermoactive packaging using phase change material particles on cellulosic materials

verfasst von: Bianca Cristina Nogueira Fernandes, Marcelo de Mello Aquilino, Ana Silvia Prata

Erschienen in: Cellulose | Ausgabe 10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Environmental concerns about the use of non-renewable raw materials and non-biodegradable waste production have increased exponentially in recent decades. Phase change materials respond to temperature variation and have been used for helping thermal control in fabrics and building materials. In this work, we demonstrated the potential of paperboard functionalized with phase change material (PCM) particles with a melting point at 79 °C aiming to obtain thermo-active properties. Thus, the package was designed based on sustainable materials as an alternative for the maintenance of high temperatures in food products. We systematically performed kinetic experiments varying the mass fractions of the particles in two distinct cooling conditions: air inside and oil inside. The thermal response was dependent on the amount of PCM particles, and the temperature of the product was kept longer during cooling in relation to the original paperboard. A remarkable difference was observed in the response time of material treated with PCM that took about 10 min more than paperboard to reach the temperature from which the sample was to be cooled. The results presented in this work expand the applicability of PCM particles for extrusion conditions and open new opportunities for thermo-active materials.

Vorheriger Artikel Emerging mixed matrix membranes based on zeolite nanoparticles and cellulose acetate for water desalination

Nächster Artikel Cellulose/cysteine based thiol-ene UV cured adsorbent: removal of silver (I) ions from aqueous solution

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abhijith R, Ashok A, Rejeesh CR (2018) Sustainable packaging applications from mycelium to substitute polystyrene: a review. Mater Today Proc 5:2139–2145. https://doi.org/10.1016/j.matpr.2017.09.211CrossRef

Benmoussa D, Molnar K, Hannache H, Cherkaoui O (2018) Novel thermo-regulating comfort textile based on Poly(allyl ethylene diamine)/ n -hexadecane microcapsules grafted onto cotton fabric. Adv Polym Technol 37:419–428. https://doi.org/10.1002/adv.21682CrossRef

Cabeza LF, Castell A, Barreneche C et al (2011) Materials used as PCM in thermal energy storage in buildings: a review. Renew Sustain Energy Rev 15:1675–1695. https://doi.org/10.1016/j.rser.2010.11.018CrossRef

Çaykara T, Demirci S, Eroğlu MS, Güven O (2005) Poly(ethylene oxide) and its blends with sodium alginate. Polymer (guildf) 46:10750–10757. https://doi.org/10.1016/j.polymer.2005.09.041CrossRef

Chalco-Sandoval W, Fabra MJ, López-Rubio A, Lagaron JM (2014) Electrospun heat management polymeric materials of interest in food refrigeration and packaging. J Appl Polym Sci 131:1–11. https://doi.org/10.1002/app.40661CrossRef

Chalco-Sandoval W, Fabra MJ, López-Rubio A, Lagaron JM (2015a) Optimization of solvents for the encapsulation of a phase change material in polymeric matrices by electro-hydrodynamic processing of interest in temperature buffering food applications. Eur Polym J 72:23–33. https://doi.org/10.1016/J.EURPOLYMJ.2015.08.033CrossRef

Chalco-Sandoval W, Fabra MJ, López-Rubio A, Lagaron JM (2015b) Development of polystyrene-based films with temperature buffering capacity for smart food packaging. J Food Eng 164:55–62. https://doi.org/10.1016/J.JFOODENG.2015.04.032CrossRef

Chalco-Sandoval W, Fabra MJ, López-Rubio A, Lagaron JM (2017) Use of phase change materials to develop electrospun coatings of interest in food packaging applications. J Food Eng 192:122–128. https://doi.org/10.1016/j.jfoodeng.2015.01.019CrossRef

Cheng W, Liu N, Wu W (2012) Studies on thermal properties and thermal control effectiveness of a new shape-stabilized phase change material with high thermal conductivity. Appl Therm Eng 36:345–352. https://doi.org/10.1016/J.APPLTHERMALENG.2011.10.046CrossRef

Fukahori R, Nomura T, Zhu C et al (2016) Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage. Appl Energy 170:324–328. https://doi.org/10.1016/J.APENERGY.2016.02.106CrossRef

Gil A, Peiró G, Oró E, Cabeza LF (2018) Experimental analysis of the effective thermal conductivity enhancement of PCM using finned tubes in high temperature bulk tanks. Appl Therm Eng 142:736–744. https://doi.org/10.1016/J.APPLTHERMALENG.2018.07.029CrossRef

Gin B, Farid MM (2010) The use of PCM panels to improve storage condition of frozen food. J Food Eng 100:372–376. https://doi.org/10.1016/j.jfoodeng.2010.04.016CrossRef

Gray-Stuart EM, Bronlund JE, Navaranjan N, Redding GP (2019) Measurement of thermal conductivity of paper and corrugated fibreboard with prediction of thermal performance for design applications. Cellulose 26:5695–5705. https://doi.org/10.1007/s10570-019-02462-5CrossRef

Hoang HM, Leducq D, Pérez-Masia R et al (2015) Heat transfer study of submicro-encapsulated PCM plate for food packaging application. Int J Refrig 52:151–160. https://doi.org/10.1016/j.ijrefrig.2014.07.002CrossRef

Huang X, Zhu C, Lin Y, Fang G (2019) Thermal properties and applications of microencapsulated PCM for thermal energy storage: a review. Appl Therm Eng 147:841–855. https://doi.org/10.1016/j.applthermaleng.2018.11.007CrossRef

Johnston JH, Grindrod JE, Dodds M, Schimitschek K (2008) Composite nano-structured calcium silicate phase change materials for thermal buffering in food packaging. Curr Appl Phys 8:508–511. https://doi.org/10.1016/J.CAP.2007.10.059CrossRef

Liao Z, Xu C, Ren Y et al (2018) A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system. Appl Therm Eng 135:116–122. https://doi.org/10.1016/J.APPLTHERMALENG.2018.02.048CrossRef

Milián YE, Gutiérrez A, Grágeda M, Ushak S (2017) A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties. Renew Sustain Energy Rev 73:983–999. https://doi.org/10.1016/J.RSER.2017.01.159CrossRef

Nielson K, Cox JT (2013) Design and optimization of a thermal capacitor. Utah State University, Logan

Oró E, de Gracia A, Cabeza LF (2013) Active phase change material package for thermal protection of ice cream containers. Int J Refrig 36:102–109. https://doi.org/10.1016/j.ijrefrig.2012.09.011CrossRef

Paulo BB, Andreola K, Taranto O et al (2019) Coating approach for a Phase Change Material (PCM). Powder Technol 341:147–156. https://doi.org/10.1016/j.powtec.2018.03.003CrossRef

Perez-Masia R, Lopez-Rubio A, Fabra MJ, Lagaron JM (2013) Biodegradable polyester-based heat management materials of interest in refrigeration and smart packaging coatings. J Appl Polym Sci 130:3251–3262. https://doi.org/10.1002/app.39555CrossRef

Pérez-Masiá R, López-Rubio A, Fabra MJ, Lagaron JM (2014) Use of electrohydrodynamic processing to develop nanostructured materials for the preservation of the cold chain. Innov Food Sci Emerg Technol 26:415–423. https://doi.org/10.1016/J.IFSET.2014.10.010CrossRef

Pongrácz E (2007) The environmental impacts of packaging. In: Kutz M (ed) Environmentally Conscious Materials and Chemicals Processing. John Wiley & Sons Inc, Hoboken, NJ, USA, pp 237–278CrossRef

Rebello FDFP (2009) Novas tecnologias aplicadas às embalagens de alimentos. Rev Agrogeoambiental 1:. https://doi.org/https://doi.org/10.18406/2316-1817v1n32009225

Rentas FJ, Macdonald VW, Houchens DM et al (2004) New insulation technology provides next-generation containers for “iceless” and lightweight transport of RBCs at 1 to 10oC in extreme temperatures for over 78 hours. Transfusion 44:210–216. https://doi.org/10.1111/j.1537-2995.2004.00642.xCrossRefPubMed

Sarier N, Onder E, Ukuser G (2015) Silver incorporated microencapsulation of n-hexadecane and n-octadecane appropriate for dynamic thermal management in textiles. Thermochim Acta 613:17–27. https://doi.org/10.1016/J.TCA.2015.05.015CrossRef

Sasaki H, Kato E (1999) Heat insulating cardboard composed of corrugated foamed polystyrene layer. Packag Technol Sci 12:151–157. https://doi.org/10.1002/(SICI)1099-1522(199905/06)12:3%3c151::AID-PTS463%3e3.0.CO;2-RCrossRef

Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev 13:318–345. https://doi.org/10.1016/j.rser.2007.10.005CrossRef

Uttaravalli AN, Dinda S, Gidla BR (2020) Scientific and engineering aspects of potential applications of post-consumer (waste) expanded polystyrene: a review. Process Saf Environ Prot 137:140–148CrossRef

Ventolà L, Calvet T, Cuevas-Diarte MÁ et al (2002) From concept to application. A new phase change material for thermal protection at − 11 °C. Mater Res Innov 6:284–290. https://doi.org/10.1007/s10019-002-0213-3CrossRef

Wang G, Wei G, Xu C et al (2019) Numerical simulation of effective thermal conductivity and pore-scale melting process of PCMs in foam metals. Appl Therm Eng 147:464–472. https://doi.org/10.1016/j.applthermaleng.2018.10.106CrossRef

Xia M, Yuan Y, Zhao X et al (2016) Cold storage condensation heat recovery system with a novel composite phase change material. Appl Energy 175:259–268. https://doi.org/10.1016/j.apenergy.2016.05.001CrossRef

Xu Z, Sun D-W, Zeng X-A et al (2015) Research developments in methods to reduce the carbon footprint of the food system: a review. Crit Rev Food Sci Nutr 55:1270–1286. https://doi.org/10.1080/10408398.2013.821593CrossRefPubMed

Titel: Biodegradable thermoactive packaging using phase change material particles on cellulosic materials
verfasst von: Bianca Cristina Nogueira Fernandes
Marcelo de Mello Aquilino
Ana Silvia Prata
Publikationsdatum: 20.05.2021
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 10/2021
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03930-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 10/2021

Fabrication of flame retardant lyocell fibers based on carboxymethylation and aluminum ion chelation

Modification of cotton fabrics with 2-diethylaminoethyl chloride for salt-free dyeing with anionic dyes

Design and characterization of new advanced energetic biopolymers based on surface functionalized cellulosic materials

Synthesis and properties of cellulose nanocrystal conjugates with reactive dyes

Cellulose nanocrystals from bleached rice straw pulp: acidic deep eutectic solvent versus sulphuric acid hydrolyses

Cellulose nanofiber-derived efficient stabilizer for oil-in-water high-internal-phase emulsion