nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.06.2016

Bonding Interface and Bending Deformation of Al/316LSS Clad Metal Prepared by Explosive Welding

verfasst von: Xunzhong Guo, Minyu Fan, Liuan Wang, Fuye Ma

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The morphology, elemental distribution, and phase analysis of the bonding interface were investigated by means of SEM, EDS, and XRD to evaluate the interface bonding properties of Al/316LSS clad metal prepared by explosive welding method. Furthermore, the micro-hardness and bending properties were also investigated. The results indicated that the linear and wavy bonding interfaces coexisted and intermetallic phases were present in the local interfacial zone. Moreover, the micro-hardness value at the bonding interface with intermetallic phases was higher than that at the interface without any intermetallic phases. In addition, bulk metal compounds could easily lead to the generation of micro-cracks during the bending forming process.

Vorheriger Artikel Effect of Prior and Post-Weld Heat Treatment on Electron Beam Weldments of (α + β) Titanium alloy Ti-5Al-3Mo-1.5V

Nächster Artikel Microstructure and Properties of FeAlCrNiMo x High-Entropy Alloys

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Torun.O. Çelikyürek and B. Baksan, Microstructure and Strength of friction-Welded Fe-28Al and 316L Stainless Steel, J. Mater. Sci. Eng. A, 2011, 29–30, p 8530–8536CrossRef

F. Findik, Recent Developments in Explosive Welding, J. Mater. Des., 2011, 32, p 1081–1093CrossRef

A. Almathami and M. Brochu, Microstructure and Transformation of Al-Containing Nanostructured 316L Stainless Steel Coatings Processed Using Spark Plasma Sintering, J. Mater. Process. Technol., 2010, 210(15), p 2119–2124CrossRef

X.Z. Guo, H.B. Liu, S.Q. Cui et al., Investigation on the Maximum Thinning and Protrusion Height of the Hydroformed 316LSS/Al Clad T-Branch, Int. J. Adv. Manuf. Technol., 2014, 73(5–8), p 727–733

X.X. Ma, Y.D. He, D.R. Wang, and J. Zhang, Enhanced High-Temperature Corrosion Resistance of (Al₂O₃–Y₂O₃)/Pt Micro-laminated Coatings on 316L Stainless Steel Alloy, J. Corros. Sci., 2012, 54, p 183–192CrossRef

G.P. Chaudhari and V.L. Acoff, Titanium Aluminide Sheets Made Using Roll Bonding and Reaction Annealing, J. Intermetallics, 2010, 18(4), p 472–478.CrossRef

M. Ma, P. Huo, W.C. Liu et al., Microstructure and Mechanical Properties of Al/Ti/Al Laminated Composites Prepared by Roll Bonding, J. Mater. Sci. Eng. A, 2015, 636, p 301–310CrossRef

M.L. Weaver, C.W. Calhoun, and H. Garmestani, Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl, J. Mater. Sci., 2002, 37(12), p 2483–2490CrossRef

R.I.L. Guthrie and M. Isac, Horizontal Single Belt Casting of Aluminum and Steel, J. Steel Res. Int., 2014, 85(8), p 1291–1302CrossRef

10.

J.W. Evans, D. Xu, and W.K. Jones, Physical and Mathematical Modeling of Metal Flow in the Continuous Casting of Steel and Aluminum, J. Met. Mater., 1998, 4(6), p 1111–1118CrossRef

11.

J. Sengupta, B.G. Thomas, and M.A. Wells, The Use of water Cooling During the Continuous Casting of Steel and Aluminum Alloys, J. Metall. Mater. Trans. A, 2005, 36(1), p 187–204CrossRef

12.

Y. Sun, J. Chen, F.M. Ma et al., Tensile and Flexural Properties of Multilayered Metal/Intermetallics Composites, J. Mater. Charact., 2015, 102, p 165–172CrossRef

13.

M. Konieczny, Mechanical Properties of Ti-(Al₃Ti+Al) and Ti-Al₃Ti Laminated Composites, J. Compos. Theory Pract., 2013, 13(2), p 102–106

14.

M. Honarpisheh, M. Asemabadi, and M. Sedighi, Investigation of Annealing Treatment on the Interfacial Properties of Explosive-Welded Al/Cu/Al Multilayer, J. Mater. Des., 2012, 37, p 122–127CrossRef

15.

A. Karolczuk, M. Kowalski, R. Bański et al., Fatigue Phenomena in Explosively Welded Steel–Titanium Clad Components Subjected to Push–Pull Loading, J. Int. J. Fatigue, 2013, 48, p 101–108CrossRef

16.

M.A. Habib, H. Keno, R. Uchida et al., Cladding of Titanium and Magnesium alloy Plates Using Energy-Controlled Underwater Three Layer Explosive Welding, J. Mater. Process. Technol., 2015, 217, p 310–316CrossRef

17.

I.A. Bataev, A.A. Bataev, V.I. Mali et al., Structural and Mechanical Properties of Metallic-Intermetallic Laminate Composites Produced by Explosive Welding and Annealing, J. Mater. Des., 2012, 35, p 225–234CrossRef

Titel: Bonding Interface and Bending Deformation of Al/316LSS Clad Metal Prepared by Explosive Welding
verfasst von: Xunzhong Guo
Minyu Fan
Liuan Wang
Fuye Ma
Publikationsdatum: 01.06.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2057-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2016

Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

A New XRD Method to Quantify Plate and Lath Martensites of Hardened Medium-Carbon Steel

Effect of Double Aging Heat Treatment on the Short-Term Creep Behavior of the Inconel 718

Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging

On the Degradation Mechanism of Low-Voltage Underground Cable with Poly(Vinyl Chloride) Insulation

Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling

Premium Partner

Marktübersichten