nach oben

Wood Science and Technology

Erschienen in:

11.03.2017 | Original

CaCO₃ in situ treated bamboo pulp fiber reinforced composites obtained by vacuum-assisted resin infusion

verfasst von: Cuicui Wang, Ge Wang, Haitao Cheng, Shuangbao Zhang, Lee M. Smith, Sheldon Q. Shi

Erschienen in: Wood Science and Technology | Ausgabe 3/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this study is to investigate the properties of CaCO₃ in situ treated bamboo pulp fiber (BPF) composites that have been filled with epoxy resin by means of vacuum-assisted resin infusion (VARI). Un-treated and treated BPF were processed at a pressure of 0.24 MPa into BPF preforms. VARI was used to infuse epoxy resin through the BPF preforms to make BPF composites. The flexural properties, impact property, and thermal properties of the BPF composites were analyzed. CaCO₃ with the loading of 30 wt% affects the performance of the composites. The flexural strength did not decrease and modulus of the treated BPF composites increased by 9.38%, while the impact strength decreased by 50.98%, compared to the control sample. Dynamic mechanical analysis revealed the maximum elastic moduli of the treated specimens increased by 1.19 times in the temperature range of −20 to 120 °C. The thermal decomposition temperature of the composites was influenced by the effect of the crystal field and size effect of CaCO₃.

Vorheriger Artikel Steam explosion pretreatment used to remove hemicellulose to enhance the production of a eucalyptus organosolv dissolving pulp

Nächster Artikel Comparative biocatalytic degradation of Kraft prehydrolysate phenolic fermentation inhibitors using bacteria-derived laccase

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Agirregomezkorta A, Martinez AB, Sanchez-Soto M, Aretxaga G, Sarrionandia M, Aurrekoetxea J (2012) Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion. Compos Part B Eng 43:2249–2256CrossRef

Akil HM, Omar MF, Mazuki AAM, Safiee S, Ishak ZAM, Abu Bakar A (2011) Kenaf fiber reinforced composites: a review. Mater Des 32:4107–4121CrossRef

Allan GG, Negri AR, Ritzenthaler P (1992) The microporosity of pulp the properties of paper made from pulp fibers internally filled with calcium carbonate. Tappi J 75:239–244

ASTM D7028-07e1 Standard test method for glass transition temperature (DMA Tg) of polymer matrix composites by dynamic mechanical analysis (DMA). American Society for Testing and Materials, West Conshohocken

ASTM D790-10 (2010) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. American Society for Testing and Materials, 2010, West Conshohocken

ASTM D6110-10 (2010) Standard test method for determining the charpy impact resistance of notched specimens of plastics. American Society for Testing and Materials, 2010, West Conshohocken

Brouwer WD, van Herpt ECFC, Labordus A (2003) Vacuum injection moulding for large structural applications. Compos Part A Appl Sci Manuf 34:551–558CrossRef

Cecen V, Sarikanat M (2008) Experimental characterization of traditional composites manufactured by vacuum-assisted resin-transfer molding. J Appl Polym Sci 107:1822–1830CrossRef

Cheng HT, Gao J, Wang G, Shi SQ, Zhang ShB, Cai LP (2014) Effect of temperature on calcium carbonate deposition in situ on bamboo fiber and polymer interfaces. Wood Fiber Sci 46:247–258

Cheng HT, Gao J, Wang G, Shi SQ, Zhang ShB, Cai LP (2015) Enhancement of mechanical properties of composites made of calcium carbonate modified bamboo fibers and polypropylene. Holzforschung 69:215–221CrossRef

Chinese standard GB/T 742-2008, Fibrous raw material, pulp, paper and board—determination of ash. Standardization Administration of the Peoples Republic of China, 2008

Feng Z, Alén R, Niemelä K (2002) Formation of aliphatic carboxylic acids during soda-AQ pulping of kenaf bark. Holzforschung 56:388–394

Fiorelli J, Rempe N, Molina JC, Dias AA (2015) Natural fiber-reinforced polymer for structural application. In: Agricultural biomass based potential materials. Springer, Berlin, pp 35–49

Gohil PP, Chaudhary V, Shaikh AA (2015) Natural fiber-reinforced composites: potential, applications, and properties. In: Agricultural biomass based potential materials. Springer, Berlin, pp 51–72

Haameem JAM, Abdul Majid MS, Afendi M, Marzuki HFA, Fahmi I, Gibson AG (2016) Mechanical properties of Napier grass fibre/polyester composites. Compos Struct 136:1–10CrossRef

Huang H, Wang XL, Ming H (2014) Effect of CaCO₃ content on mechanical properties of HDPE/CF composites. Eng Plast Appl 42:30–33

Leong YW, Ishak ZAM, Ariffin A (2004) Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites. J Appl Polym Sci 91:3327–3336CrossRef

Li J (2008) Biomass composite materials. Science Press, Beijing

Liang JZ (2016) Impact toughness and flexural properties of PPS/GF/Nano-CaCO₃ ternary composites. Polym Plast Technol Eng 47:1227–1230CrossRef

Liang KW, Shi SQ, Nicholas DD, Sites L (2013) Accelerated weathering test of kenaf fiber unsaturated polyester sheet molding compounds. Wood Fiber Sci 45:42–48

Liang K, Shi SQ, Wang G (2014) Effect of impregnated inorganic nanoparticles on the properties of the kenaf bast. Fibers 2:242–254CrossRef

Lu B, Zhang LW, Zeng JCh (2005) Natural fiber composites material (Version 1). Chemical Industry Press, Beijing

Luo ZhF, Huang R, Lu A, Cai BH, Fan WY (2000) Study on HDPE composite reinforced and toughened by nano-CaCO₃. Chin Plast 14:25–29

Park SY, Choi HS, Choi WJ, Kwon H (2012) Effect of vacuum thermal cyclic exposures on unidirectional carbon fiber/epoxy composites for low earth orbit space applications. Compos Part B Eng 43:726–738CrossRef

Renneckar S, Zink-Sharp AG, Ward TC, Glasser WG (2004) Compositional analysis of thermoplastic wood composites by TGA. J Appl Polym Sci 93:1484–1492CrossRef

Rudd CD, Long AC, Kendall KN, Mangin C (1997) Liquid moulding technologies. Rapra Technology Limited Press, OxfordCrossRef

Shi SQ, Gardner DJ (2006) Hygroscopic thickness swelling rate of compression molded wood fiber board and wood fiber/polymer composites. Compos Part A Appl Sci Manuf 37:1276–1285CrossRef

Shi SQ, Wu D (2009) Modeling moisture absorption process of wood-based composites under over-saturated moisture conditions using two-part equations. Wood Sci Technol 43:143–152CrossRef

Shi JSh, Shi SQ, Barnes HM, Horstemeyer MF, Wang G (2011) Kenaf bast fibers-Part II inorganic nanoparticle impregnation for polymer composites. Int J Polym Sci 2011:736474-1–736474-7. doi:10.1155/2011/736474

Tang YJ, Li YM, Song J, Pan ZhD (2007) Structural characterization and thermal decomposition behavior of microsized and nanosized CaCO₃. Acta Phys Chim Sin 23:717–722

Vukušić I (2014) Comparison of mechanical properties of composites reinforced with natural and glass fiber. Master’s thesis (Bologna) Fakultet strojarstva i brodogradnje, Sveučilište u Zagrebu, Zagreb

Xia ChL, Shi SQ, Cai LP (2015a) Vacuum-assisted resin infusion (VARI) and hot pressing for CaCO₃ nanoparticle treated kenaf fiber reinforced composites. Compos Part B Eng 78:138–143CrossRef

Xia ChL, Shi SQ, Cai LP, Hua J (2015b) Property enhancement of kenaf fiber composites by means of vacuum-assisted resin transfer molding (VARTM). Holzforschung 69:307–312CrossRef

Xia ChL, Shi SQ, Cai LP, Nasrazadani S (2015c) Increasing inorganic nanoparticle impregnation efficiency by external pressure for natural fibers. Ind Crops Prod 69:395–399CrossRef

Xian Y, Wang CC, Wang G, Ren WH, Cheng HT (2016) Understanding the mechanical and interfacial properties of core-shell structured bamboo-plastic composites. J Appl Polym Sci 133:43053CrossRef

Yue LH, Shui M, Xu ZhD, Lv DY (2000) The crystal structure of ultra-fine CaCO₃ and its thermal decomposition. Chem J Chin Univ 21:1555–1559

Zampaloni M, Pourboghrat F, Yankovich SA, Rodgers BN, Moore J, Drzal LT, Mohanty AK, Misra M (2007) Kenaf natural fiber reinforced polypropylene composites: a discussion on manufacturing problems and solutions. Compos Part A Appl Sci Manuf 38:1569–1580CrossRef

Zhang XM, Liu XY (2006) Fiber reinforced thermoset composites and its application. Chemical Industry Press, Beijing

Zhang MQ, Rong MZh (2003) Performance improvement of polymers by the addition of grafted nano inorganic particles. Chin J Polym Sci 21:587–602

Titel: CaCO3 in situ treated bamboo pulp fiber reinforced composites obtained by vacuum-assisted resin infusion
verfasst von: Cuicui Wang
Ge Wang
Haitao Cheng
Shuangbao Zhang
Lee M. Smith
Sheldon Q. Shi
Publikationsdatum: 11.03.2017
Verlag: Springer Berlin Heidelberg
Erschienen in: Wood Science and Technology / Ausgabe 3/2017
Print ISSN: 0043-7719
Elektronische ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-017-0900-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2017

Steam explosion pretreatment used to remove hemicellulose to enhance the production of a eucalyptus organosolv dissolving pulp

Nanocellulosic fillers for waterborne wood coatings: reinforcement effect on free-standing coating films

Sorption and thermodynamic properties of wood of Pinus canariensis C. Sm. ex DC. buried in volcanic ash during eruption

Synergistic effect of melamine polyphosphate and aluminum hypophosphite on mechanical properties and flame retardancy of HDPE/wood flour composites

Estimation of the sulfur ester content of cellulose nanocrystals prepared by sulfuric acid hydrolysis: a reproducible and fast infrared method

Potential of different poplar clones for sugar production