nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

CAD Software Integration with Programming Tools for Modelling, Measurement and Verification of Surfaces

verfasst von : Rafael Gella-Marín, Anastasios Tzotzis, César García-Hernández, José-Luis Huertas-Talón, Panagiotis Kyratsis

Erschienen in: Experiments and Simulations in Advanced Manufacturing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In modern industry, surface verification is usually performed with the aid of manual instruments or machines such as Coordinates Measuring Machines (CMM) along with the appropriate software. The goal is comparing the manufactured product with a pattern in order to detect deviations from the desired dimensions.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Designing Novel Synthetic Grafts for Large Bone Defects: Experimental and Numerical Studies

Nächstes Kapitel Experimental Investigation of Process Parameters Effect on Laser Engraving Process Quality

Dillmann R, Huck M (1986) A software system for the simulation of robot based manufacturing processes. Robotics 2:3–18CrossRef

Kim J, Park J, Ko TJ (2008) End mill design and machining via cutting simulation. Comput Des 40:324–333

Dimitriou V, Vidakis N, Antoniadis A (2007) Advanced computer aided design simulation of gear hobbing by means of three-dimensional kinematics modeling. J Manuf Sci Eng Trans ASME 129:911–918CrossRef

Wu Y, Zhou Y, Zhou Z et al (2018) An advanced CAD/CAE integration method for the generative design of face gears. Adv Eng Softw 126:90–99CrossRef

Wang L, Chen ZC (2014) A new CAD/CAM/CAE integration approach to predicting tool deflection of end mills. Int J Adv Manuf Technol 72:1677–1686CrossRef

Kyratsis P, Tapoglou N, Bilalis N, Antoniadis A (2011) Thrust force prediction of twist drill tools using a 3D CAD system application programming interface. Int J Mach Mach Mater 10:18–33

Vakondios DG, Kyratsis P (2020) An innovative CAD - based simulation of ball - end milling in microscale. Adv Comput Des 5:13–34

Tzivelekis CA, Yiotis LS, Fountas NA, Krimpenis AA (2015) Parametrically automated 3D design and manufacturing for spiral-type free-form models in an interactive CAD/CAM environment. Int J Interact Des Manuf 11:223–232CrossRef

Yicong G (2019) Quantifying the complexity of subassemblies in a fully automated assembly system. Assem Autom 39:803–812CrossRef

10.

Zhang S, Wang G, Zhang L, Fang X (2009) CNC programming system for complex components based on KBE within integrated environment of CAD/CAPP/CAM. Front Mech Eng China 4:97–102CrossRef

11.

Roberto V, Osorio-Gómez G (2012) Assembly planning with automated retrieval of assembly sequences from CAD model information. Assem Autom 32:347–360CrossRef

12.

Tzotzis A, Garcia-Hernandez C, Talón JLH, Kyratsis P (2020) CAD-Based Automated Design of FEA-Ready Cutting Tools. J Manuf Mater Process 4:1–14

13.

Tzotzis A, Garcia-Hernandez C, Huertas-Talon J-L et al (2017) Engineering applications using CAD based application programming interface. In: MATEC web of conferences, pp 1–7

14.

Mok H-S, Kim C-H, Kim C-B (2011) Automation of mold designs with the reuse of standard parts. Expert Syst Appl 38:12537–12547CrossRef

15.

Du B, Wang X, Feng Y et al (2014) Intelligent assembly technology based on standard parts feature of CATIA. Mod Appl Sci 8:49–55

16.

Sapidis N, Chatziparasidis I (2017) Framework to automate mechanical-system design using multiple product-models and assembly feature technology. Int J Prod Lifecycle Manag 10:124–150CrossRef

17.

Nasulea D, Oancea G, Neagoe I (2017) Parametric design of dies for cutting and drawing using Catia. Bull Transilv Univ Braşov 10:1–8

18.

Tapoglou N (2019) Calculation of non-deformed chip and gear geometry in power skiving using a CAD-based simulation. Int J Adv Manuf Technol 100:1779–1785CrossRef

19.

Tapoglou N, Antoniadis A (2012) CAD-based calculation of cutting force components in gear hobbing. J Manuf Sci Eng 134:1–8

20.

Xu J, Liu W, Sun Y (2008) Optimal localization of complex surfaces in CAD-based inspection. Front Mech Eng China 3:426–433CrossRef

21.

Qisheng W (2019) Triangular mesh generation on free-form surfaces based on bubble dynamics simulation. Eng Comput 36:646–663CrossRef

22.

Bartłomiej S (2013) Method of spiral bevel gear tooth contact analysis performed in CAD environment. Aircr Eng Aerosp Technol 85:467–474CrossRef

23.

He G, Huang X, Ma W et al (2017) CAD-based measurement planning strategy of complex surface for five axes on machine verification. Int J Adv Manuf Technol 91:2101–2111CrossRef

24.

García-Hernández C, Gella-Marín R, Huertas-Talón JL, Berges-Muro L (2016) Algorithm for measuring gears implemented with general-purpose spreadsheet software. Measurement 85:1–12

25.

Negahban A, Smith J (2014) Simulation for manufacturing system design and operation: literature review and analysis. J Manuf Syst 33:241–261CrossRef

26.

Kyratsis P, Bilalis N, Antoniadis A (2011) CAD-based simulations and design of experiments for determining thrust force in drilling operations. Comput Des 43:1879–1890

27.

Talón JLH, Ortega JCC, Gómez CL et al (2010) Manufacture of a spur tooth gear in Ti–6Al–4V alloy by electrical discharge. Comput Des 42:221–230

28.

Garcia-Hernandez C, Marín R, Talón J et al (2016) WEDM manufacturing method for noncircular gears using CAD/CAM software. Strojniški Vestn J Mech Eng 62:137–144CrossRef

29.

Özel C, Özler L (2005) An investigation on manufacturing of the straight bevel gear using end mill by CNC milling machine. J Manuf Sci Eng 127:503–511CrossRef

30.

González DE, Peña JL, Pérez ST (2013) Manual práctico Solid Edge ST6. Servicios Informáticos DAT, SL

Titel: CAD Software Integration with Programming Tools for Modelling, Measurement and Verification of Surfaces
verfasst von: Rafael Gella-Marín
Anastasios Tzotzis
César García-Hernández
José-Luis Huertas-Talón
Panagiotis Kyratsis
Verlag: Springer International Publishing
Buch: Experiments and Simulations in Advanced Manufacturing
Print ISBN: 978-3-030-69471-5

Electronic ISBN: 978-3-030-69472-2

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-69472-2_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht