nach oben

Steel in Translation

Erschienen in:

01.01.2020

Capability Process Assessment of Radial-Displacement Rolling of Heat-Resistant Alloy HN73MBTYU

verfasst von: P. V. Patrin, B. V. Karpov, A. S. Aleshchenko, S. P. Galkin

Erschienen in: Steel in Translation | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract—

The paper presents an experimental study on the technological capabilities of radial-displacement rolling of small diameter rods. These are made of heat-resistant alloy HN73MBTYU on pilot mills MISIS specifying the ingot rolling schedule with a diameter of 60 mm for a 22-mm-diameter rod. The following was conducted: a quality assessment of the rod obtained, as well as a compliance with the requirements of the current normative and technical documentation. The production possibility of small diameter rods of HN73MBTYU alloy from ingots with a 60-mm diameter that meets the technical documentation requirements, with the use of technology and radial displacement rolling mills, has been proved. The tested technological solutions have a high degree of readiness for industrial introduction in mini- and micro-metallurgical plant environment.

Vorheriger Artikel Computer-Aided Design (CAD) of Energy-Efficient Cold Rolling Technology

Nächster Artikel Study of the Surface Defect Nature of Hot-Rolled Products in the Edge Zone

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Adno, Yu.L., Phenomena of metallurgical mini-plants, Mirovaya Ekon. Mezhdunar. Otnosheniya, 2014, no. 3, pp. 34–45.

Galkin, S.P., Theory and technology of stationary screw rolling of billets from microplastic steels and alloys, Doctoral (Eng.) Dissertation, Moscow: Moscow Inst. Steel Alloy, 1998.

Galkin, S.P., Romantsev, B.A., and Kharitonov, E.A., Putting into practice innovative potential in the universal radial-shear rolling process, CIS Iron Steel Rev., 2014, no. 9, pp. 35–39.

Galkin, S.P., Regulating radial-shear and screw rolling on the basis of the metal trajectory, Steel Transl., 2004, vol. 34, no. 7, pp. 57–60.

Romantsev, B.A., Galkin, S.P., Mikhailov, V.K., et al., Varietal micromill, Stal’, 1995, no. 2, pp. 40–42.

Valeev, I.Sh. and Valeeva, A.Kh., Microhardness and microstructure of copper Cu 99,99% at radial-shear rolling, Pis’ma Mater., 2013, vol. 3, no. 1 (9), pp. 38–40.

Dobatkin, S., Galkin, S., Estrin, Y., et al., Grain refinement, texture, and mechanical properties of a magnesium alloy after radial-shear rolling, J. Alloys Compd., 2019, vol. 774, no. 5, pp. 969–979.CrossRef

Akopyan, T.K., Aleshchenko, A.S., Belov, N.A., and Galkin, S.P., Effect of radial–shear rolling on the formation of structure and mechanical properties of Al–Ni and Al–Ca aluminum–matrix composite alloys of eutectic type, Phys. Met. Metallogr., 2018, vol. 119, no. 3, pp. 241–250.CrossRef

Naydenkin, E.V., Ratochka, I.V., Mishin, I.P., and Lykova, O.N., Evolution of the structural-phase state of a VT22 titanium alloy during helical rolling and subsequent aging, Russ. Phys. J., 2015, vol. 58, no. 8, pp. 1068–1073.CrossRef

10.

Valeeva, A.Kh., Valeev, I.Sh., and Fazlyakhmetov, R.F., Microstructure of the β-phase in the Sn11Sb5.5Cu babbit, Phys. Met. Metallogr., 2017, vol. 118, no. 1, pp. 48–51.CrossRef

11.

Naizabekov, A.B., Lezhnev, S.N., Dyja, H., et al., The effect of cross rolling on the microstructure of ferrous and non-ferrous metals and alloys, Metalurgija, 2017, vol. 56, nos. 1–2, pp. 199–202.

12.

Sheremetyev, V., Kudryashova, A., Dubinskiy, S., et al., Structure and functional properties of metastable beta Ti–18Zr–14Nb (at %) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment, J. Alloys Compd., 2018, vol. 737, pp. 678–683.CrossRef

13.

Karpov, B.V., Patrin, P.V., Galkin, S.P., et al., Radial-shear rolling of titanium alloy VT-8 bars with controlled structure for small diameter ingots (≤200 mm), Metallurgist, 2018, vol. 61, nos. 9–10, pp. 884–890.CrossRef

14.

Karpov, B.V., Skripalenko, M.M., Galkin, S.P., et al., Studying the nonstationary stages of screw rolling of billets with profiled ends, Metallurgist, 2017, vol. 61, nos. 3–4, pp. 257–264.CrossRef

15.

Vol’ratkh, K., Production of round rolling using three-roll mills, Chern. Met., 2004, no. 12, pp. 23–24.

16.

Nussbaum, G., Kramer, W., Bittner, G., and Schnell, G., Erfahrungen und Ergebnisse nach dreijahrigem Betrieb eines 3-Walzen-Reduzier- und Kalibrierblocks, Stahl Eisen, 2006, vol. 126, no. 8, pp. 27–36.

17.

Radyuchenko, Yu.S., Rotatsionnaya kovka (Rotational Forging), Moscow: Mashlit, 1962.

18.

Andreev, V.A., Yusupov, V.S., Perkas, M.M., et al., Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP, Russ. Metall. (Engl. Transl.), 2017, vol. 10, pp. 890–894.CrossRef

Titel: Capability Process Assessment of Radial-Displacement Rolling of Heat-Resistant Alloy HN73MBTYU
verfasst von: P. V. Patrin
B. V. Karpov
A. S. Aleshchenko
S. P. Galkin
Publikationsdatum: 01.01.2020
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 1/2020
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S096709122001009X

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract—

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Industrial Process Control: Structure and Property Formation of Amorphous Alloys

Study of the Surface Defect Nature of Hot-Rolled Products in the Edge Zone

Wear Life of Filtration Sleeves during the Industrial Operation of Fabric Filters

On the Movement of Briquetted Mass in Extruder. Exact Solutions. 1

Dependence of Cast Iron Chill from its Carbon Equivalent

Effect of Carbon and Fluorine Added to Silicomarganese Slag Fluxes

Premium Partner

Marktübersichten