Abstract
When surfaces are in contact, load can be transmitted in the normal direction by compressive forces and in the tangential direction by shear or friction. In the case of cracks or lines of discontinuities in concrete, the chances are that they will be oriented at some angles with the load. This leads to rubbing or sliding of adjacent surfaces, an influence that will be discussed in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Griffith, A.A., The theory of rupture, Proc. 1st Int. Congress Appl. Mech., Delft, pp. 55–93 (1924).
McClintock, F.A. and Walsh, J.B., Friction on Griffith cracks in rocks under pressure, Proceedings 4th National Congress Applied Mechanics, Berkeley, pp. 1015–1021 (1962).
Sih, G.C., Some basic problems in fracture mechanics and new concepts, J. of Engin. Fract. Mech., Vol. 5, pp. 365–377 (1973).
Sih, G.C., Strain energy density factor applied to mixed mode crack problems, Int. J. of Fract., Vol. 10, pp. 305–321 (1974).
Sih, G.C., Introductory Chapters in Mechanics of Fracture, Vol. I to VII, edited by G.C. Sih, Martinus Nijhoff Publishers, The Hague, 1973–1981.
Sih, G.C. and Macdonald, B., Fracture mechanics applied to engineering problems — strain energy density fracture criterion, Engineering Fracture Mechanics, 6, pp. 361–386 (1974).
Carpinteri, A., Crack dominante e microcracks nei materiali fragili, Giornale del Genio Civile, fasc. 1-2-3, pp. 67–82 (1978).
Carpinteri, A., DiTommaso, A. and Viola, E., Stato limite di frattura nei materiali fragili, Giornale del Genio Civile, fasc. 4-5-6, pp. 201–224 (1978).
Drucker, D.C., Quart. Appl. Math., 7, pp. 411–418 (1950).
Kupfer, H., Hilsdorf, H. and Rusch, H., Behavior of concrete under biaxial stresses, Journal of the American Concrete Institute, 65 (1969).
McHenry, D. and Karni, J., Strength of concrete under combined tensile and compressive stress, Journal of the American Concrete Institute, 54, pp. 829–840 (1958).
Weibull, W., A statistical theory of the strength of materials, Swedish Royal Institute for Engineering Research, Stockholm (1939).
Jayatilaka, A.S., Fracture of Engineering Brittle Materials, Applied Science Publishers LTD, London (1979).
Freudenthal, A.M., Statistical approach to brittle fracture, Fracture: An Advanced Treatise, edited by H. Liebowitz, Vol. II, pp. 592–619 (1968).
Krajcinovic, D. and Fonseka, G.U., The continuous damage theory of brittle materials. Part 1: General theory, Journal of Applied Mechanics, 48, pp. 809–815 (1981).
Fonseka, G.U. and Krajcinovic, D., The continuous damage theory of brittle materials. Part 2: Uniaxial and plane response modes, Journal of Applied Mechanics, 48, pp. 816–824 (1981).
Delameter, W.R., Herrmann, G. and Barnett, D.M., Weakening of an elastic solid by a rectangular array of cracks, Journal of Applied Mechanics, 42, pp. 74–80 (1975).
Janson, J. and Huit, J., Fracture mechanics and damage mechanics — a combined approach, Journal de Mecanique Appliquee, 1, pp. 69–84 (1977).
Janson, J., Dugdale-crack in a material with continuous damage formation, Engineering Fracture Mechanics, 9, pp. 891–899 (1977).
Janson, J., Damage model of crack growth and instability, Engineering Fracture Mechanics, 10, pp. 795–806 (1978).
Dugdale, D.S., Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, 8, pp. 100–104 (1960).
Broberg, H., Damage measures in creep deformation and rupture, Swedish Solid Mechanics Reports (1974).
Kachanov, L.M., Time to failure under creep conditions, AN SSSR, OTN, 8 (1958).
Carpinteri, A. and Sih, G.C., Damage accumulation and crack growth in bilinear materials with softening: application of strain energy density theory, J. of Theoretical and Applied Fracture Mechanics, Vol. 1, No. 2, pp. 145–160 (1984).
Sih, G.C., Mechanics of material damage in concrete, Fracture Mechanics of Concrete: Material Characterization and Testing, edited by A. Carpinteri and A.R. Ingraffea, Martinus Nijhoff Publishers, The Hague, pp. 1–29 (1984).
Sih, G.C., Non-linear response of concrete: interaction of size, loading step and material property, Applications of Fracture Mechanics to Cementitious Composites, edited by S.P. Shah, Martinus Nijhoff Publishers, The Hague, pp. 3–23 (1984).
Rice, J.R., Path independent integral and approximate analysis of strain concentration by notches and cracks, Journal of Applied Mechanics, 35, pp. 379–386 (1968).
Rice, J.R., The localization of plastic deformation, Theoretical and Applied Mechanics, Proceedings of the 14th IUTAM Congress, Delft, pp. 207–220 (1976).
Bazant, Z.P. and Oh, B.H., Concrete fracture via stress-strain relations, Report 81-10/665c, Center for Concrete and Geomaterials, Northwestern University (1981).
Hillerborg, A., Modeer, M. and Petersson, P.E., Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, 6, pp. 773–782 (1976).
Gjørv, O.E. and Løland, K.E., Ductility of concrete and tensile behavior, Rapport BML 80.613, Institutt for Bygningsmateriallaere, Universitetet i Trondheim (1980).
Petersson, P.E., Crack growth and development of fracture zones in plain concrete and similar materials, Report TVBM-1006, Division of Building Materials, Lund Institute of Technology (1981).
Gerstle, W.H., Ingraffea, A.R. and Gergely, P., The fracture mechanics of bond in reinforced concrete, Report 82-7, Department of Structural Engineering, Cornell University (1982).
Wecharatana, M. and Shah, S.P., Predictions of nonlinear fracture process zone in concrete, Journal of Engineering Mechanics, American Society of Civil Engineers, 109, pp. 1231–1246 (1983).
Visalvanich, K. and Naaman, A.E., Fracture modeling of fiber reinforced cementitious composites, Report 82-1, Department of Materials Engineering, University of Illinois at Chicago Circle (1982).
Krajcinovic, D. and Silva, M.A.G., Statistical aspects of the continuous damage theory, International Journal of Solids and Structures, 18, pp. 551–562 (1982).
Sih, G.C., Mechanics of crack growth: geometrical size effect in fracture, Fracture Mechanics in Engineering Application, edited by G.C. Sih and S.R. Valluri, Sijthoff and Noordhoff, pp. 3–29 (1979).
Sih, G.C. and Tzou, D.Y., Mechanics of nonlinear crack growth: effect of specimen size and loading step, Proceedings on Modeling Problems in Crack Tip Mechanics, edited by J.T. Pindera, Martinus Nijhoff Publishers, The Hague, pp. 155–169 (1984)
Sih, G.C. and Chao, C.K., Size effect of cylindrical specimens with fatigue cracks, J. of Theoretical and Applied Fracture Mechanics, Vol 1, No. 3, pp. 239–247 (1984).;
Sih, G.C., Analytical aspects of macro-fracture mechanics, Analytical and Experimental Fracture Mechanics, edited by G.C. Sih and M. Mirabile, Sijthoff and Noordhoff, pp. 3–15 (1981).
Sih, G.C. and Madenci, E., Crack growth resistance characterized by the strain energy density function, J. of Engin. Fract. Mech., Vol. 18, pp. 1159–1171 (1983).
Sih, G.C. and Tzou, D.Y., Crack-extension resistance of polycarbonate material, J. of Theoretical and Applied Fracture Mechanics, Vol. 2, No. 3 (in press).
Carpinteri, A., Size effect in fracture toughness testing: a dimensional analysis approach, Analytical and Experimental Fracture Mechanics, edited by G.C. Sih and M. Mirabile, Sijthoff and Noordhoff, pp. 785–797 (1981).
Carpinteri, A., Notch sensitivity in fracture testing of aggregative materials, Engineering Fracture Mechanics, 16, pp. 467–481 (1982).
Sih, G.C., The strain energy density concept and criterion, Special Issue in Fracture Mechanics Dedicated to G.R. Irwin, ed. A.K. Rao, J. of Aeronautical Society of India, Vol. 37, No. 1 pp. 43–60 (1985).
Kipp, M.E. and Sih, G.C., The strain energy density failure criterion applied to notched elastic solids, International Journal of Solids and Structures, Vol. 11, pp. 153–173 (1975).
Sih, G.C. and Matic, P., Mechanical response of materials with physical defects. Part 1: Modelling of material damage for center cracked panel, Report AFOSR-TR-81-1, Institute of Fracture and Solid Mechanics, Lehigh University (1981).
Sih, G.C. and Matic, P., Mechanical response of materials with physical defects. Part 2: Combined modelling of material damage and crack propagation for center cracked panel, Report AFOSR-TR-82-2, Institute of Fracture and Solid Mechanics, Lehigh University (1982).
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1986 Martinus Nijhoff Publishers, Dordrecht
About this chapter
Cite this chapter
Carpinteri, A. (1986). Fracture of concrete and brittle materials. In: Mechanical damage and crack growth in concrete. Engineering Application of Fracture Mechanics, vol 5. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-4350-6_2
Download citation
DOI: https://doi.org/10.1007/978-94-009-4350-6_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-8434-5
Online ISBN: 978-94-009-4350-6
eBook Packages: Springer Book Archive