nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

01.06.2019 | ORIGINAL ARTICLE

Chip morphology in ball nose end milling process of nickel-based alloy material under MQL condition

verfasst von: M. S. Kasim, M. S. A. Hafiz, J. A. Ghani, C. H. C. Haron, R. Izamshah, M. S. A. Aziz, W. N. F. Mohamad, P. K. Wong, J. Saedon

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-12/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This present paper deals with the chip segmentation in ball nose end milling process of Inconel 718 for turbine blades. It deals with characterizing the chip morphologies and microstructure investigations under minimum quantity lubrication (MQL) condition. In this study, the effects of cutting speed (Vc), radial depth of cut (WoC), and axial depth of cut (DoC) on chip segmentation are presented. The study proved that chip dimensional values were dominantly affected by the Vc, WoC, and DoC, while the frequency of dislodged chips was affected by notch wear. It was observed that the star anise-like chips formed are associated with the tool failure.

Vorheriger Artikel Milling properties of Kevlar 49 fiber composite based on fiber orientation in cryogenic cooling

Nächster Artikel Tool life prediction based on Gauss importance resampling particle filter

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Arunachalam R, Mannan MA (2000) Machinability of nickel-based high temperature alloys. Mach Sci Technol 4:127–168. https://doi.org/10.1080/10940340008945703 CrossRef

Locq D, Caron P (2011) On some advanced nickel-based superalloys for disk applications. J Aerosp Lab Al03–01:1–9

Aramcharoen A, Chuan SK (2014) An experimental investigation on cryogenic milling of Inconel 718 and its sustainability assessment. Procedia CIRP 14:529–534. https://doi.org/10.1016/j.procir.2014.03.076 CrossRef

Ee KC, Balaji AK, Jawahir IS (2003) Progressive tool-wear mechanisms and their effects on chip-curl/chip-form in machining with grooved tools: an extended application of the equivalent toolface (ET) model. Wear 255:1404–1413. https://doi.org/10.1016/S0043-1648(03)00112-1 CrossRef

Zhang G, To S, Xiao G (2014) The relation between chip morphology and tool wear in ultra-precision raster milling. Int J Mach Tools Manuf 80–81:11–17. https://doi.org/10.1016/j.ijmachtools.2014.02.005 CrossRef

Azarhoushang B, Akbari J (2007) Ultrasonic-assisted drilling of Inconel 738-LC. Int J Mach Tools Manuf 47:1027–1033. https://doi.org/10.1016/j.ijmachtools.2006.10.007 CrossRef

BenSalem S, Bayraktar E, Boujelbene M, Katundi D (2011) Effect of cutting parameters on the chip formation in orthogonal cutting. Int J Mach Tools Manuf 1101–1106

Çalışkan H, Küçükköse M (2015) The effect of aCN/TiAlN coating on tool wear, cutting force, surface finish and chip morphology in face milling of Ti6Al4V superalloy. Int J Refract Met Hard Mater 50:304–312. https://doi.org/10.1016/j.ijrmhm.2015.02.012 CrossRef

Reddy MR, Kumar PR, Rao GKM (2011) Effect of feed rate on the generation of surface roughness in turning. Int J Eng Sci Technol 3:8099–8105

10.

Mabrouki T, Courbon C, Zhang Y, Rech J, Nélias D, Asad M, Hamdi H, Belhadi S, Salvatore F (2016) Some insights on the modelling of chip formation and its morphology during metal cutting operations. Comptes Rendus Mécanique 344:335–354. https://doi.org/10.1016/j.crme.2016.02.003 CrossRef

11.

Venkatesan K, Ramanujam R, Kuppan P (2017) Investigation of machinability characteristics and chip morphology study in laser-assisted machining of Inconel 718. Int J Adv Manuf Technol 91:3807–3821. https://doi.org/10.1007/s00170-017-9987-8 CrossRef

12.

Polvorosa R, Suárez A, de Lacalle LNL, Cerrillo I, Wretland A, Veiga F (2017) Tool wear on nickel alloys with different coolant pressures: comparison of Alloy 718 and Waspaloy. J Manuf Process 26:44–56. https://doi.org/10.1016/j.jmapro.2017.01.012 CrossRef

13.

Yalçın B, Özgür AE, Koru M (2009) The effects of various cooling strategies on surface roughness and tool wear during soft materials milling. Mater Des 30:896–899. https://doi.org/10.1016/j.matdes.2008.05.037 CrossRef

14.

Hadi MA, Ghani JA, Che Haron CH, Kasim MS (2014) Investigation on wear behavior and chip formation during up-milling and down-milling operations for Inconel 718. J Teknol 66. https://doi.org/10.11113/jt.v66.2687

15.

Atlati S, Haddag B, Nouari M, Moufki A (2015) Effect of the local friction and contact nature on the built-up edge formation process in machining ductile metals. Tribol Int 90:217–227. https://doi.org/10.1016/j.triboint.2015.04.024 CrossRef

16.

Anastassiou G, Tschentscher F, Zeschnigk M (2002) Prognostisch relevante Marker bei malignem Melanom der Uvea. Der Ophthalmol 99:327–332. https://doi.org/10.1007/s00347-002-0635-8 CrossRef

17.

Sobiyi K, Sigalas I, Akdogan G, Turan Y (2015) Performance of mixed ceramics and CBN tools during hard turning of martensitic stainless steel. Int J Adv Manuf Technol 77:861–871. https://doi.org/10.1007/s00170-014-6506-z CrossRef

18.

Jawahir IS, Brinksmeier E, M’Saoubi R et al (2011) Surface integrity in material removal processes: recent advances. CIRP Ann 60:603–626. https://doi.org/10.1016/j.cirp.2011.05.002 CrossRef

19.

Gekonde HO, Subramanian SV (2002) Tribology of tool–chip interface and tool wear mechanisms. Surf Coat Technol 149:151–160. https://doi.org/10.1016/S0257-8972(01)01488-8 CrossRef

20.

Amin AKMN, Ismail AF, Nor Khairusshima MK (2007) Effectiveness of uncoated WC–Co and PCD inserts in end milling of titanium alloy—Ti–6Al–4V. J Mater Process Technol 192–193:147–158. https://doi.org/10.1016/j.jmatprotec.2007.04.095 CrossRef

21.

Sun S, Brandt M, Dargusch MS (2010) Machining Ti–6Al–4V alloy with cryogenic compressed air cooling. Int J Mach Tools Manuf 50:933–942. https://doi.org/10.1016/j.ijmachtools.2010.08.003 CrossRef

22.

Ranjan Das S, Panda A, Dhupal D (2018) Hard turning of AISI 4340 steel using coated carbide insert: surface roughness, tool wear, chip morphology and cost estimation. Mater Today Proc 5:6560–6569. https://doi.org/10.1016/j.matpr.2017.11.311 CrossRef

23.

Gao Y, Sun R, Chen Y, Leopold J (2016) Analysis of chip morphology and surface topography in modulation assisted machining. Int J Mech Sci 111–112:88–100. https://doi.org/10.1016/j.ijmecsci.2016.03.025 CrossRef

24.

Rath D, Panda S, Pal K (2018) Prediction of surface quality using chip morphology with nodal temperature signatures in hard turning of AISI D3 steel. Mater Today Proc 5:12368–12375. https://doi.org/10.1016/j.matpr.2018.02.215 CrossRef

25.

Kumar P, Kumar M, Bajpai V, Singh NK (2017) Recent advances in characterization, modeling and control of burr formation in micro-milling. Manuf Lett 13:1–5. https://doi.org/10.1016/j.mfglet.2017.04.002 CrossRef

26.

Kasim MS, Hafiz MSA, Ghani JA, Haron CHC, Izamshah R, Sundi SA, Mohamed SB, Othman IS (2019) Investigation of surface topology in ball nose end milling process of Inconel 718. Wear 426–427:1318–1326. https://doi.org/10.1016/j.wear.2018.12.076 CrossRef

27.

SUMITOMO General Cataloque (2018) Performance cutting tool. Hyogo

28.

Shu X, Wang Y, Peng J et al (2015) Recent progress in electroless Ni coatings for magnesium alloys. Int J Electrochem Sci 10:1261–1273

29.

Davies MA, Chou Y, Evans CJ (1996) On chip morphology, tool wear and cutting mechanics in finish hard turning. CIRP Ann 45:77–82. https://doi.org/10.1016/S0007-8506(07)63020-0 CrossRef

Titel: Chip morphology in ball nose end milling process of nickel-based alloy material under MQL condition
verfasst von: M. S. Kasim
M. S. A. Hafiz
J. A. Ghani
C. H. C. Haron
R. Izamshah
M. S. A. Aziz
W. N. F. Mohamad
P. K. Wong
J. Saedon
Publikationsdatum: 01.06.2019
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9-12/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-03948-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-12/2019

Thermal fields in dissimilar 7055 Al and 2197 Al-Li alloy FSW T-joints: numerical simulation and experimental verification

A framework for model-based integrated inspection

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Experimental and numerical investigation of flexible bulging process of aluminum AA1050-H14 sheet metal with soft tools

Predictive modeling and multiobjective optimization of diamond turning process of single-crystal silicon using RSM and desirability function approach

Residual stress analyses in multilayer PP/GFP/PP composite tube

Premium Partner

Marktübersichten