nach oben

Erschienen in:

2015 | OriginalPaper | Buchkapitel

4. Coating Technologies for Automotive Engine Applications

verfasst von : Arup Gangopadhyay

Erschienen in: Coating Technology for Vehicle Applications

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Coatings are materials deposited on surfaces to enhance a specific set of performance attributes, i.e., wear resistance, erosion resistance, corrosion resistance, friction reduction, etc. Since wear, corrosion, and friction phenomenon are restricted on the surface, deposition of a coating provides a great flexibility in imparting properties which could be significantly different from the parent material. There are wide varieties of materials available for deposition and the choice of a material depends on the application, compatibility with the base material, and the deposition process. This chapter first reviewed lubrication regimes in critical tribological contacts (cam and tappet in valvetrain, piston and piston rings and cylinder bore, piston pins, and bearings) in an engine to justify where coatings could improve friction reduction and durability. Then, described coatings being used/explored in each of these applications followed by an outlook of coating technologies in future automotive engines.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Overview of DLC-Coated Engine Components

Nächstes Kapitel Customized Coating Systems for Products with Added Value from Development to High-Volume Production

Comfort, A., “An introduction to heavy-duty diesel engine frictional losses and lubricant properties affecting fuel Economy – Part I”, SAE paper number 2003-01-3225.

Fukuoka, S., Hara, N., Mori, A., and Ohtsubo, K., “Friction loss reduction by new lighter valvetrain system”, JSAE Review, 18, pp 107–111, 1997.CrossRef

Gangopadhyay, A.K., McWatt, D.G., Zdrodowski, R.J., Simko, S.J., Matera, S., Sheffer, K., and Furby, R.S., "Valvetrain friction reduction through surface engineering", Tribology Transactions, Vol. 55, 1, pp 99–108, 2012.CrossRef

Mabuchi, Y., Hamada, T., Izumi, H., Yasuda, Y., and Kano, M., “The Development of hydrogen-free DLC-coated valve-lifter”, SAE paper 2007-01-1752.

http://www.nissan-global.com/EN/NEWS/2006/_STORY/060822-01-e.html, August 22, 2006.

Crabb, D., Fleiss, M., Larsson, J-E., Somhorst, J., “New modular engine platform from Volvo”, MTZ, Vol. 74, page 4, 2013.CrossRef

Okuda, S., Dewa,T., Sagawa, T., “Development of 5W-30 GF-4 fuel-saving engine oil for DLC-coated valve lifters”, SAE Paper 2007-01-1979.

Shinyoshi, T. Fuwa, Y. and Ozaki, Y. (2007), “Wear analysis of DLC coating in oil containing Mo-DTC”, SAE paper no 2007-01-1969.

Haque, T. Morina, A. Neville, A. Kapadia, R. and Arrowsmith, S. (2007), “Non-ferrous coating/lubricant interactions in tribological contacts: Assessments of tribofilms,” Tribology International, 40, pp 1603–1612.CrossRef

10.

Vengudusamy, B., Greene, J.H, Lamb, G.D, and Spikes, H.A.(2012), “Behaviour of MoDTC in DLC/DLC and DLC/steel contacts”, Tribology International, 54, pp 68–76.CrossRef

11.

Keunecke, M., Bewilogua, K., Becker, J., Gies, A. Grischke, M. (2012), “CrC/a-C:H coatings for highly loaded, low friction applications under formulated oil lubrication”, Surface & Coatings Technology 207, pp 270–278.CrossRef

12.

Shimada, Y., Abou, S., Okita K., and Chuubachi, M. (2006), “Development of friction prediction procedure and friction reduction technologies for new Nissan HR and MR engines”, SAE Paper 2006-01-0618.

13.

Matz, M. M. and Kennedy, M. (2011), New concepts for thermally coated piston rings in modern two-stroke internal combustion engines, Thermal Spray Bulletin 4(1), pp 20–24.

14.

Martínez, D. L., Valverde, M., Rabuté, R., Ferrarese, A. (2010), “Ring Packs for friction optimised engines”, MTZ, 71, 7–8, pp 26–29.CrossRef

15.

Wakabayashi, R., Mochiduki, K., and Yoshida, H. (2009), “Lubricating Condition of Piston Ring and Cylinder for Significantly Reducing Piston Friction Loss” SAE paper no. 2009-01-0188.

16.

Paulo, J. R., Mordente, P.J.R., Bruno, R.A. (2009), “Top ring technology to low fuel consumption flex fueled engines”, SAE paper no. 2009-36-0128.

17.

Kennedy, M., Hoppe, S., Esser, J., (2012), “Piston ring coating reduces gasoline engine friction”, MTZ, 73, 5, pp 40–43.CrossRef

18.

Kennedy, M., Hoppe, S., Esser, J., (2014), “Lower friction losses with new piston ring coatings”, MTZ, 75, 4, pp 25–28.

19.

Aiyoshizawa, E., and Hori, K., (2014), “The New Nissan High Efficient 4-Cylinder 1.6L GDI turbocharged engine with low pressure EGR - Evolution for Lower Fuel Consumption combined with High Output Performance” Internationales Wiener Motorensymposium, 35.

20.

Gand, B., (2011), “Coating for cylinder surfaces in aluminium engine blocks”. MTZ, 72, pp 34–39.

21.

Morawitz, U., Mehring, J., and Schamm, L., (2013) “Benefits of thermal spray coatings in internal combustion engines with specific view on friction reduction and thermal management”, SAE paper no. 2013-01-0292.

22.

Werner, P., Schommers, J., Breitbach, H., Spengel, C. (2011) “The new V6 diesel engine from Mercedes-Benz”, MTZ, 72, pp 22–28.CrossRef

23.

Steinparzer, F. Unger, H., Brüner, T., Kannenberg, D. (2011), “The new BMW 2.0 litre 4-cylinder S.I. engine with Twin Power Turbo Technology”, 32 Internationales Wiener Motorensymposium.

24.

M. Buchmann, R. Gadow, and D. Lopez, (2003), “Advanced hypersonic flame spray coatings for cylinder liners in light metal engines”, Society of Automotive Engineers Paper No. 2003-01-1099, SAE International.

25.

Handbook of Thermal Spray Technology, Ed. J. R. Davis, ASM International, Materials Park, OH, 2004.

26.

Funatani, K., Kurusawa, I., Fabiyi, A., and Puz, M.F. (1995), “Engine performance improvements”, Automotive Engineering,, I, p15-20.

27.

Shi, L, Sun, C.F., Zhou, F., and Liu, W.M., (2005) “Electrodeposited nickel-cobalt composite coating containing nano-sized Si₃N₄”, Materials Science and Engineering A, 397, pp 190–194.CrossRef

28.

Matykina, E., Arrabal, R., Mohamed, A., Skeldon, P., and Thompson, G.E., (2009) “Plasma electrolytic oxidation of pre-anodized aluminium”, Corrosion Science, 51, pp 2897–2905.CrossRef

29.

Yerokhin, A.L., Nie, X., Leyland, A., Matthews, A., Dowey, S.J., (1999) “Plasma electrolysis for surface engineering”, Surface and Coatings Technology, 122, pp 73–93.CrossRef

30.

Kuhn, A. (2002), “Plasma anodized aluminum – A 2000/2000 ceramic coating”, Metal Finishing, pp44-50, Nov./Dec.

31.

Abed, G., Zou, Q., Barber, G., Zhou, B., Wang, Y., Liu, Y., and Shi, F., (2013) “Study of the motion of floating piston pin against pin bore” SAE paper number 2013-01-1215.

32.

Shi, F., (2011) “An Analysis of Floating Piston Pin”, SAE paper number 2011-01-1407.

33.

Kohashi, K., Kimura, Y., Murakami, M. and Drouvin, Y., (2013), “Analysis of piston friction in internal combustion engine”, SAE paper number 2013-01-2515.

34.

Kim, Y., Park, H, An, J-U, “Development of nano diamond polymer coating on piston skirt for fuel efficiency”, SAE paper number 2011-01-1401.

35.

Suzuki, N, Hikasa, A., “Evaluation of the Tribological Property of Resin Coating by the Addition of Nylon and Graphite Particles”, SAE paper number 2012-32-0090.

36.

Birch, S., “Federal-Mogul targets gasoline engines for new piston technologies”, Automotive Engineering Online, September 16, 2010.

37.

Ogihara, H., “Research into surface improvement for low friction pistons” SAE paper number 2005-01-1647.

38.

Witzenburg, G., “Dreamy technology makes new Honda 4-Cyl. stand out”, WardsAuto, Apr 1, 2013.

39.

Press release, http://investor.federalmogul.com/phoenix.zhtml?c = 97066&p = irol-newsArticle_Print&ID = 1449403&highlight=, July 20, 2010.

40.

Hanke, W., Ando, H., Fahr, M., Voigt, M., “Friction reduction in power cylinder systems for passenger car diesel engines”. MTZ, 75, pp 26-31.

41.

Asakura,h., Tsuji, H., Kagohara,Y., Sonobe, H., and Fujita, M., “A study of lead-free aluminum alloy bearings with overlay for recent automotive engines”, SAE paper number 2008-01-0091.

42.

Nirasawa, T., Yasui, M., Ishigo, O., Kagohara, Y., and Fujita, M., “A study of lead-free Al-Zn-Si alloy bearing with overlay for recent automotive engines”, SAE paper number 2009-01-1054.

43.

George, J.W., and Brock, R., “Polymeric engine bearings for hybrid and start stop applications” SAE paper number, 2012-01-1966.

44.

Adam, A., Prefot, M., Wilhelm, M. (2012) “Crankshaft bearings for engines with start stop systems”. MTZ, 71, pp 22–25.CrossRef

Titel: Coating Technologies for Automotive Engine Applications
verfasst von: Arup Gangopadhyay
Verlag: Springer International Publishing
Buch: Coating Technology for Vehicle Applications
Print ISBN: 978-3-319-14770-3

Electronic ISBN: 978-3-319-14771-0

Copyright-Jahr: 2015
DOI: https://doi.org/10.1007/978-3-319-14771-0_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht