Erschienen in:

01.12.2024 | Original Paper

Cobalt- and Chromium-Oxide-Based Coatings: Thermally Spraying a Glaze Layer

verfasst von: Andre R. Mayer, Bruno C. N. M. de Castilho, Fadhel B. Ettouil, Richard R. Chromik, Christian Moreau, Pantcho P. Stoyanov

Erschienen in: Tribology Letters | Ausgabe 4/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Die Studie konzentriert sich auf die Entwicklung von Beschichtungen auf Kobalt- und Chromoxid-Basis mittels Suspensionsplasmaspray, um die Verschleißfestigkeit und Stabilität unter Hochtemperaturbedingungen in Gasturbinen-Triebwerken der Luft- und Raumfahrt zu verbessern. Die Beschichtungen sind so konzipiert, dass sie die Glasurschicht auf Kobaltbasislegierungen nachahmen, die überlegene tribologische Eigenschaften aufweisen. Die Forschung umfasst die Charakterisierung der Mikrostruktur, der mechanischen Eigenschaften und der tribologischen Eigenschaften der Beschichtungen sowohl bei Raum- als auch bei hohen Temperaturen. Die Ergebnisse zeigen, dass diese Beschichtungen eine hervorragende Verschleißfestigkeit aufweisen und schützende Tribofilme bilden, was sie vielversprechend für Hochtemperaturanwendungen in der Luft- und Raumfahrtindustrie macht.

KI-Generiert

Diese Zusammenfassung des Fachinhalts wurde mit Hilfe von KI generiert.

Nächster Artikel Modeling Contact of Rough Surfaces with Bearing Ratio Curves

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Stoyanov, P., Harrington, K.M., Frye, A.: Insights into the tribological characteristic of Cu-based coatings under extreme contact conditions. JOM 72, 2191–2197 (2020). https://doi.org/10.1007/s11837-020-04087-7CrossRef

Stott, F.H., Lin, D.S., Wood, G.C.: The structure and mechanism of formation of the ‘glaze’ oxide layers produced on nickel-based alloys during wear at high temperatures. Corros. Sci. 13, 449–469 (1973). https://doi.org/10.1016/0010-938X(73)90030-9CrossRef

Stott, F.H.: The role of oxidation in the wear of alloys. Tribol. Int. 31, 61–71 (1998). https://doi.org/10.1016/S0301-679X(98)00008-5CrossRef

Peterson, M.B., Florek, J.J., Lee, R.E.: Sliding characteristics of metals at high temperatures. A S L E Trans. 3, 101–109 (1960). https://doi.org/10.1080/05698196008972392CrossRef

Erdemir, A.: A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings. Surf. Coat. Technol. 200, 1792–1796 (2005). https://doi.org/10.1016/j.surfcoat.2005.08.054CrossRef

Prakash, B., Celis, J.P.: The lubricity of oxides revised based on a polarisability approach. Tribol. Lett. 27, 105–112 (2007). https://doi.org/10.1007/s11249-007-9223-zCrossRef

Dreano, A., Fouvry, S., Sao-Joao, S., Galipaud, J., Guillonneau, G.: The formation of a cobalt-based glaze layer at high temperature: a layered structure. Wear 440–441, 203101 (2019). https://doi.org/10.1016/j.wear.2019.203101CrossRef

Viat, A., Guillonneau, G., Fouvry, S., Kermouche, G., Sao Joao, S., Wehrs, J., Michler, J., Henne, J.-F.: Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures. Wear 392–393, 60–68 (2017). https://doi.org/10.1016/j.wear.2017.09.015CrossRef

Viat, A., Dreano, A., Fouvry, S., De Barros Bouchet, M.-I., Henne, J.-F.: Fretting wear of pure cobalt chromium and nickel to identify the distinct roles of HS25 alloying elements in high temperature glaze layer formation. Wear 376–377, 1043–1054 (2017). https://doi.org/10.1016/j.wear.2017.01.049CrossRef

10.

Harrington, K.M., Miller, E.C., Frye, A., Stoyanov, P.: Tribological insights of Co- and Ni-based alloys in extreme conditions. Wear 477, 203827 (2021). https://doi.org/10.1016/j.wear.2021.203827CrossRef

11.

Campbell, G.A.: The cobalt market revisited. Miner. Econ. 33, 21–28 (2020). https://doi.org/10.1007/s13563-019-00173-8CrossRef

12.

Bolelli, G., Cannillo, V., Lusvarghi, L., Manfredini, T.: Wear behaviour of thermally sprayed ceramic oxide coatings. Wear 261, 1298–1315 (2006). https://doi.org/10.1016/j.wear.2006.03.023CrossRef

13.

Mazzi, A., Bazzanella, N., Orlandi, M., Edla, R., Patel, N., Fernandes, R., Miotello, A.: Physical vapor deposition of mixed-metal oxides based on Fe, Co and Ni as water oxidation catalysts. Mater. Sci. Semicond. Process. 42, 155–158 (2016). https://doi.org/10.1016/j.mssp.2015.08.006CrossRef

14.

Shahien, M., Suzuki, M., Tsutai, Y.: Controlling the coating microstructure on axial suspension plasma spray process. Surf. Coat. Technol. 356, 96–107 (2018). https://doi.org/10.1016/j.surfcoat.2018.09.055CrossRef

15.

Goel, S., Björklund, S., Curry, N., Wiklund, U., Joshi, S.: Axial suspension plasma spraying of Al₂O₃ coatings for superior tribological properties. Surf. Coat. Technol. 315, 80–87 (2017). https://doi.org/10.1016/j.surfcoat.2017.02.025CrossRef

16.

Darut, G., Ben-Ettouil, F., Denoirjean, A., Montavon, G., Ageorges, H., Fauchais, P.: Dry sliding behavior of sub-micrometer-sized suspension plasma sprayed ceramic oxide coatings. J Therm Spray Tech. 19, 275–285 (2010). https://doi.org/10.1007/s11666-009-9415-1CrossRef

17.

Roy, A., Munagala, V.N.V., Patel, P., Sharifi, N., Alidokht, S.A., Makowiec, M., Chromik, R.R., Moreau, C., Stoyanov, P.: Friction and wear behavior of suspension plasma sprayed tantalum oxide coatings at elevated temperatures. Surf. Coat. Technol. 452, 129097 (2023). https://doi.org/10.1016/j.surfcoat.2022.129097CrossRef

18.

Roy, A., Jalilvand, V., Mohammadkhani, S., Patel, P., Dolatabadi, A., Roue, L., Guay, D., Chromik, R.R., Moreau, C., Stoyanov, P.: Enhanced wear resistance of cobalt oxide over nickel oxide. Tribol. Lett. 71, 99 (2023). https://doi.org/10.1007/s11249-023-01769-6CrossRef

19.

Ratia, V.L., Zhang, D., Daure, J.L., Shipway, P.H., McCartney, D.G., Stewart, D.A.: Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment. Wear 426–427, 1466–1473 (2019). https://doi.org/10.1016/j.wear.2018.12.058CrossRef

20.

Ahn, H.-S., Kwon, O.-K.: Tribological behaviour of plasma-sprayed chromium oxide coating. Wear 225–229, 814–824 (1999). https://doi.org/10.1016/S0043-1648(98)00390-1CrossRef

21.

Bhushan, B., Gray, S.: Development of surface coatings for air-lubricated, compliant journal bearings to 650 °C. A S L E Trans. 23, 185–196 (1980). https://doi.org/10.1080/05698198008982959CrossRef

22.

Kiilakoski, J., Trache, R., Björklund, S., Joshi, S., Vuoristo, P.: Process parameter impact on suspension-HVOF-sprayed Cr₂O₃ coatings. J. Therm. Spray Technol. 28, 1933–1944 (2019). https://doi.org/10.1007/s11666-019-00940-7CrossRef

23.

Sadri, E., Ashrafizadeh, F.: Structural characterization and mechanical properties of plasma sprayed nanostructured Cr₂O₃-Ag composite coatings. Surf. Coat. Technol. 236, 91–101 (2013). https://doi.org/10.1016/j.surfcoat.2013.09.033CrossRef

24.

Mao, L., Xiao, J., Sun, G., Wei, X., Wu, D., Cao, P., Zhang, C.: Microstructure and wear behaviors of Cr2O3-Al2O3 composite coatings deposited by atmospheric plasma spraying. Surf. Coat. Technol. 444, 128619 (2022). https://doi.org/10.1016/j.surfcoat.2022.128619CrossRef

25.

Bolelli, G., Steduto, D., Kiilakoski, J., Varis, T., Lusvarghi, L., Vuoristo, P.: Tribological properties of plasma sprayed Cr₂O₃, Cr₂O₃–TiO₂, Cr₂O₃–Al₂O₃ and Cr₂O₃–ZrO₂ coatings. Wear 480–481, 203931 (2021). https://doi.org/10.1016/j.wear.2021.203931CrossRef

26.

Test Method for Microindentation Hardness of Materials. http://www.astm.org/cgi-bin/resolver.cgi?E384-22

27.

Oliver, W.C., Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.1564CrossRef

28.

G02 Committee: Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. http://www.astm.org/cgi-bin/resolver.cgi?G133-05R16

29.

Kucharski, S., Mróz, Z.: Identification of wear process parameters in reciprocating ball-on-disc tests. Tribol. Int. 44, 154–164 (2011). https://doi.org/10.1016/j.triboint.2010.10.010CrossRef

30.

VanEvery, K., Krane, M.J.M., Trice, R.W., Wang, H., Porter, W., Besser, M., Sordelet, D., Ilavsky, J., Almer, J.: Column formation in suspension plasma-sprayed coatings and resultant thermal properties. J. Therm. Spray Technol. 20, 817–828 (2011). https://doi.org/10.1007/s11666-011-9632-2CrossRef

31.

Li, Y., Qiu, W., Qin, F., Fang, H., Hadjiev, V.G., Litvinov, D., Bao, J.: Identification of cobalt oxides with Raman scattering and Fourier transform infrared spectroscopy. J. Phys. Chem. C 120, 4511–4516 (2016). https://doi.org/10.1021/acs.jpcc.5b11185CrossRef

32.

Hosterman, B.D.: Raman Spectroscopic Study of Solid Solution Spinel Oxides. https://digitalscholarship.unlv.edu/thesesdissertations/1087

33.

Deng, J., Lei, J., Wang, G., Zhong, L., Zhao, M., Lei, Z.: Experimental investigation of cobalt deposition on 304 stainless steel in borated and lithiated high-temperature water. Materials 16, 3834 (2023). https://doi.org/10.3390/ma16103834CrossRefPubMedPubMedCentral

34.

Lughi, V., Lenaz, D., Bonifacio, A., Princivalle, F., Sergo, V., Parisi, F.: A Raman spectroscopy study of the oxidation processes in synthetic chromite FeCr₂O₄. Ceram. Int. 46, 29382–29387 (2020). https://doi.org/10.1016/j.ceramint.2020.07.059CrossRef

35.

D’Ippolito, V.: Linking crystal chemistry and physical properties of natural and synthetic spinels: an UV-VIS-NIR and Raman study. https://core.ac.uk/download/pdf/74322831.pdf

36.

Bayata, F., Alpas, A.T.: The high temperature wear mechanisms of iron-nickel steel (NCF 3015) and nickel based superalloy (inconel 751) engine valves. Wear 480–481, 203943 (2021). https://doi.org/10.1016/j.wear.2021.203943CrossRef

37.

Kim, K.J., Koh, T.Y.: Cationic structure and charge transport in sol–gel-derived nickel-cobaltite thin films. J. Sol–Gel Sci. Technol. 77, 528–533 (2016). https://doi.org/10.1007/s10971-015-3878-yCrossRef

38.

Mo, S., Li, S., Xiao, H., He, H., Xue, Y., Zhang, M., Ren, Q., Chen, B., Chen, Y., Ye, D.: Low-temperature CO oxidation over integrated penthorum chinense-like MnCo₂O₄ arrays anchored on three-dimensional Ni foam with enhanced moisture resistance. Catal. Sci. Technol. 8, 1663–1676 (2018). https://doi.org/10.1039/C7CY02474FCrossRef

39.

Waghmode, R.B., Torane, A.P.: Role of deposition time on synthesis of high-performance NiCo₂O₄ supercapacitors. J. Mater. Sci. Mater. Electron. 28, 9575–9583 (2017). https://doi.org/10.1007/s10854-017-6705-0CrossRef

40.

Beyhaghi, M., Rouhani, M., Hobley, J., Jeng, Y.-R.: In-situ and ex-situ comparison of oxidation of Inconel 718 manufactured by selective laser melting and conventional methods up to 650 °C. Appl. Surf. Sci. 569, 151037 (2021). https://doi.org/10.1016/j.apsusc.2021.151037CrossRef

41.

Jadidi, M., Vardelle, A., Dolatabadi, A., Moreau, C.: Heat transfer in suspension plasma spraying. In: Handbook of Thermal Science and Engineering. pp. 2923–2966. Springer, Cham (2018)

42.

Yamauchi, A., Kurokawa, K.: Evaporation of Cr₂O₃ in atmospheres containing H₂O. Oxid. Met. 59, 517–527 (2003). https://doi.org/10.1023/A:1023671206976CrossRef

43.

Kim, S., Kwon, O., Kumar, S., Xiong, Y., Lee, C.: Development and microstructure optimization of atmospheric plasma-sprayed NiO/YSZ anode coatings for SOFCs. Surf. Coat. Technol. 202, 3180–3186 (2008). https://doi.org/10.1016/j.surfcoat.2007.11.041CrossRef

44.

Mohammadkhani, S., Jalilvand, V., Davis, B., Ettouil, F.B., Dolatabadi, A., Roué, L., Moreau, C., Guay, D.: Suspension plasma spray deposition of CoxNi1-xO coatings. Surf. Coat. Technol. 399, 126168 (2020). https://doi.org/10.1016/j.surfcoat.2020.126168CrossRef

45.

Sone, B.T., Fuku, X.G., Maaza, M.: Physical & electrochemical properties of green synthesized Bunsenite NiO nanoparticles via extracts. Int. J. Electrochem. Sci. 11, 8204–8220 (2016). https://doi.org/10.20964/2016.10.17

Titel: Cobalt- and Chromium-Oxide-Based Coatings: Thermally Spraying a Glaze Layer
verfasst von: Andre R. Mayer
Bruno C. N. M. de Castilho
Fadhel B. Ettouil
Richard R. Chromik
Christian Moreau
Pantcho P. Stoyanov
Publikationsdatum: 01.12.2024
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 4/2024
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-024-01927-4

Effect of Water on Wear of DLC Coatings in High Temperature and Pressurized Ethanol

Open Access
Original Paper

Investigation on Corrosion–Wear Interaction Behavior of 8Cr4Mo4V-Bearing Steel Under Various Operating Conditions

Original Paper

Visualization of Structural Deformation of Polymer Additives in Oil Under High Shear Flow

Original Paper

Preparation of Graphene and Its Tribological Properties Based on Deep Eutectic Solvent Stripping Method

Original Paper

Effect of Nanoparticles and Microparticles of Hexagonal Boron Nitride on Structure, Thermal and Mechanical Stability of Lithium and Calcium Greases

Open Access
Original Paper

Modeling Contact of Rough Surfaces with Bearing Ratio Curves

Original Paper

Premium Partner

Bildnachweise

MKVS GbR/© MKVS GbR, Nordson/© Nordson, ViscoTec/© ViscoTec, BCD Chemie GmbH, Merz+Benteli/© Merz+Benteli, Robatech/© Robatech, Hermann Otto GmbH/© Hermann Otto GmbH, Ruderer Klebetechnik GmbH, Xometry Europe GmbH/© Xometry Europe GmbH, Atlas Copco/© Atlas Copco, Sika/© Sika, Medmix/© Medmix, Kisling AG/© Kisling AG, Dosmatix GmbH/© Dosmatix GmbH, Innotech GmbH/© Innotech GmbH, Hilger u. Kern GmbH, VDI Logo/© VDI Wissensforum GmbH, Dr. Fritz Faulhaber GmbH & Co. KG/© Dr. Fritz Faulhaber GmbH & Co. KG, BEINLICH PUMPEN GMBH/© BEINLICH PUMPEN GMBH, mta robotics AG/© mta robotics AG

Springer Professional

Cobalt- and Chromium-Oxide-Based Coatings: Thermally Spraying a Glaze Layer

Abstract

Abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2024

Effect of Water on Wear of DLC Coatings in High Temperature and Pressurized Ethanol

Investigation on Corrosion–Wear Interaction Behavior of 8Cr4Mo4V-Bearing Steel Under Various Operating Conditions

Visualization of Structural Deformation of Polymer Additives in Oil Under High Shear Flow

Preparation of Graphene and Its Tribological Properties Based on Deep Eutectic Solvent Stripping Method

Effect of Nanoparticles and Microparticles of Hexagonal Boron Nitride on Structure, Thermal and Mechanical Stability of Lithium and Calcium Greases

Modeling Contact of Rough Surfaces with Bearing Ratio Curves

Premium Partner

Marktübersichten

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"