nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

3. Coeval Cold Spray Additive Manufacturing Variances and Innovative Contributions

verfasst von : Rija Nirina Raoelison

Erschienen in: Cold-Spray Coatings

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Tremendous attention has been given to the cold spray process, even more today with the emergence of additive manufacturing, worldwide. Several inventions related to the cold spray technology have been patented for over a century and mostly since a couple of decades. But the cold spray technology knows a period of great innovations due to recent and current substantial explorations. Various technological solutions have been developed. The technical dimension, and particularly in terms of manufacturing method, has also always been a major genesis of progresses and novelties. This chapter is a technological survey of the cold spray additive manufacturing and reports variant methods and innovative contributions. Through an introduction section, the chapter begins by a depiction of cold spraying (CS) that addresses a review of distinctive deposition methods based on a capability variance. Then, a section reports a brief chronology of cold spraying towards the generic modern deposition method as it stands nowadays. A concise survey of material aspect is addressed, this showing the current capability of cold spraying prior to a brief overview of various deposit possibilities and applications. Stand-alone sections will be focused on modern variances of cold spraying, viz. the low-pressure cold spray method bringing new benefits and the very-low-pressure cold spray manufacturing for the development of advanced technological solutions. Since combination of cold spray with another process for various innovations represents a new added value, such approach merits to be highlighted among modern trends of the cold spray use. For that purpose, this book chapter also addresses an overview of hybrid combinations based on the cold spray technology, including novel hybrid variant for 3D submicron architecturation and laser-assisted cold spray method that enables positive thermal effect, viz. improved deposition and increased deposit features. Combining high-temperature deposition and high kinematic conditions, a new cold spray variant, denoted pulse gas dynamic spraying capable of thermal improvement is also reported. Together, all these achievements reveal a great flexibility of the cold spray additive manufacturing in terms of material possibilities, deposition methods and technological solutions.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Cold Spray Applications

Nächstes Kapitel Low-Pressure Cold Spray (LPCS)

Ahn SH, Chun DM, Kim CS (2011) Nanoscale hybrid manufacturing process by nano particle deposition system (NPDS) and focused ion beam (FIB). CIRP Ann – Manuf Technol 60:583–586. https://doi.org/10.1016/j.cirp.2011.03.071CrossRef

Ahn S-H, Choi J-O, Kim C-S et al (2012) Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication. CIRP Ann – Manuf Technol 61:575–578. https://doi.org/10.1016/j.cirp.2012.03.094CrossRef

Ajdelsztajn L, Schoenung JM, Jodoin B, Kim GE (2005) Cold spray deposition of nanocrystalline aluminum alloys. Metall Mater Trans A 36:657–666. https://doi.org/10.1007/s11661-005-0182-4CrossRef

Ajdelsztajn L, Jodoin B, Schoenung JM (2006a) Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic spraying. Surf Coat Technol 201:1166–1172. https://doi.org/10.1016/j.surfcoat.2006.01.037CrossRef

Ajdelsztajn L, Zúñiga A, Jodoin B, Lavernia EJ (2006b) Cold-spray processing of a Nanocrystalline al-cu-mg-Fe-Ni alloy with Sc. J Therm Spray Technol 15:184–190. https://doi.org/10.1361/105996306X107995CrossRef

Alhulaifi AS, Buck GA, Arbegast WJ (2012) Numerical and experimental investigation of cold spray gas dynamic effects for polymer coating. J Therm Spray Technol 21:852–862. https://doi.org/10.1007/s11666-012-9743-4CrossRef

Alkhimov AP, Papyrin AN, Kosarev VF, Nesterovich NI, Shushpanov MM, Papyrin AN (1990) Gas-dynamic spraying method for applying a coating. https://www.google.com/patents/US5302414. Accessed 14 Oct 2016

Ang ASM, Berndt CC, Cheang P (2011) Deposition effects of WC particle size on cold sprayed WC–co coatings. Surf Coat Technol 205:3260–3267. https://doi.org/10.1016/j.surfcoat.2010.11.045CrossRef

Assadi H, Kreye H, Gärtner F, Klassen T (2016) Cold spraying – A materials perspective, Acta Mater. https://doi.org/10.1016/j.actamat.2016.06.034

Bacciochini A, Radulescu MI, Charron-Tousignant Y et al (2012) Enhanced reactivity of mechanically-activated nano-scale gasless reactive materials consolidated by coldspray. Surf Coat Technol 206:4343–4348. https://doi.org/10.1016/j.surfcoat.2012.02.024CrossRef

Bakshi SR, Singh V, Balani K et al (2008) Carbon nanotube reinforced aluminum composite coating via cold spraying. Surf Coat Technol 202:5162–5169. https://doi.org/10.1016/j.surfcoat.2008.05.042CrossRef

Bray M, Cockburn A, O’Neill W (2009) The laser-assisted cold spray process and deposit characterisation. Surf Coat Technol 203:2851–2857. https://doi.org/10.1016/j.surfcoat.2009.02.135CrossRef

Burlacov I, Jirkovský J, Kavan L et al (2007) Cold gas dynamic spraying (CGDS) of TiO2 (anatase) powders onto poly(sulfone) substrates: microstructural characterisation and photocatalytic efficiency. J Photochem Photobiol Chem 187:285–292. https://doi.org/10.1016/j.jphotochem.2006.10.023CrossRef

Champagne V, Helfritch D (2015) Critical assessment 11: structural repairs by cold spray. Mater Sci Technol 31:627–634. https://doi.org/10.1179/1743284714Y.0000000723CrossRef

Charles R (1958) Device for treating the surface of a workpiece. https://www.google.com/patents/US3100724. Accessed 14 Oct 2016

Cho S, Takagi K, Kwon H et al (2012) Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process. Surf Coat Technol 206:3488–3494. https://doi.org/10.1016/j.surfcoat.2012.02.021CrossRef

Christian Widener (2014) Repair and Refurbishment Lessons Learned Using Cold Spray. CSAT workshop 2014. http://www.coldsprayteam.com/pastCSATworkshops.html. Accessed 9 Sept 2017

Christian Widener, Rob Hrabe, Brian James, Victor Champagne (2012) B1 Bomber-FEB Panel Repair by CS. CSAT workshop 2012. http://www.coldsprayteam.com/pastCSATworkshops.html. Accessed 9 Sept 2017

Christoulis DK, Guetta S, Irissou E et al (2010) Cold-spraying coupled to Nano-pulsed Nd-YaG laser surface pre-treatment. J Therm Spray Technol 19:1062–1073. https://doi.org/10.1007/s11666-010-9500-5CrossRef

Christoulis DK, Jeandin M, Irissou E, Legoux J-G, Knapp W (2012) Laser-Assisted Cold Spray (LACS). InTech. http://www.intechopen.com/books/nd-yag-laser/laser-assisted-cold-spray-lacs. Accessed 8 Nov 2016

Chun D-M, Ahn S-H (2011) Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system. Acta Mater 59:2693–2703. https://doi.org/10.1016/j.actamat.2011.01.007CrossRef

Chun DM, Kim MH, Lee JC, Ahn SH (2008a) TiO2 coating on metal and polymer substrates by nano-particle deposition system (NPDS). CIRP Ann – Manuf Technol 57:551–554. https://doi.org/10.1016/j.cirp.2008.03.111CrossRef

Chun D-M, Kim M-H, Lee J-C, Ahn S-H (2008b) A Nano-particle deposition system for ceramic and metal coating at room temperature and low vacuum conditions. Int J Precis Eng Manuf 9:51–53

Chun D-M, Kim M-H, Lee J-C, Ahn S-H (2008) Nano particle deposition system (NPDS) for ceramic and metal coating at room temperature and low vacuum condition. IEEE:383–386. doi:https://doi.org/10.1109/ICSMA.2008.4505557

Chun D-M, Choi J-O, Lee CS et al (2012) Nano-particle deposition system (NPDS): low energy solvent-free dry spray process for direct patterning of metals and ceramics at room temperature. Int J Precis Eng Manuf 13:1107–1112. https://doi.org/10.1007/s12541-012-0145-9CrossRef

Chun D-M, Kim C-S, Choi J-O et al (2014) Multilayer deposition of ceramic and metal at room temperature using nanoparticle deposition system (NPDS) and planarization process. Int J Adv Manuf Technol 72:41–46. https://doi.org/10.1007/s00170-013-5327-9CrossRef

Couto M, Dosta S, Torrell M et al (2013) Cold spray deposition of WC–17 and 12Co cermets onto aluminum. Surf Coat Technol 235:54–61. https://doi.org/10.1016/j.surfcoat.2013.07.011CrossRef

Dean SW, Potter JK, Yetter RA et al (2013) Energetic intermetallic materials formed by cold spray. Intermetallics 43:121–130. https://doi.org/10.1016/j.intermet.2013.07.019CrossRef

Dosta S, Couto M, Guilemany JM (2013) Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates. Acta Mater 61:643–652. https://doi.org/10.1016/j.actamat.2012.10.011CrossRef

Ed Malison (2013) Practical Application of SST equipment, powders and knowledge. CSAT workshop 2013. http://www.coldsprayteam.com/pastCSATworkshops.html. Accessed 9 Sept 2017

Fan S-Q, Yang G-J, Li C-J et al (2006a) Characterization of microstructure of Nano-TiO2 coating deposited by vacuum cold spraying. J Therm Spray Technol 15:513–517. https://doi.org/10.1361/105996306X146901CrossRef

Fan S-Q, Li C-J, Li C-X et al (2006b) Preliminary study of performance of dye-sensitized solar cell of Nano-TiO2 coating deposited by vacuum cold spraying. Mater Trans 47:1703–1709. https://doi.org/10.2320/matertrans.47.1703CrossRef

Fan S-Q, Li C-J, Li C-X et al (2006c) Preliminary study of performance of dye-sensitized solar cell of Nano-TiO2 coating deposited by vacuum cold spraying. Mater Trans JIM 47:1703–1709. https://doi.org/10.2320/matertrans.47.1703CrossRef

Fan S-Q, Li C-J, Yang G-J, Zhang L-Z, Gao J-C, Xi Y-X (2007) Fabrication of nano-TiO2 coating for dye-sensitized solar cell by vacuum cold spraying at room temperature. J Therm Spray Technol 16:893–897. https://doi.org/10.1007/s11666-007-9090-z

Ganesan A, Affi J, Yamada M, Fukumoto M (2012) Bonding behavior studies of cold sprayed copper coating on the PVC polymer substrate. Surf Coat Technol 207:262–269. https://doi.org/10.1016/j.surfcoat.2012.06.086CrossRef

Ganesan A, Yamada M, Fukumoto M (2013) Cold spray coating deposition mechanism on the thermoplastic and thermosetting polymer substrates. J Therm Spray Technol 22:1275–1282. https://doi.org/10.1007/s11666-013-9984-xCrossRef

Gardon M, Latorre A, Torrell M et al (2013) Cold gas spray titanium coatings onto a biocompatible polymer. Mater Lett 106:97–99. https://doi.org/10.1016/j.matlet.2013.04.115CrossRef

Ghelichi R, Bagherifard S, Mac Donald D et al (2014) Fatigue strength of al alloy cold sprayed with nanocrystalline powders. Int J Fatigue 65:51–57. https://doi.org/10.1016/j.ijfatigue.2013.09.001CrossRef

Grigoriev S, Okunkova A, Sova A, Bertrand P, Smurov I (2015) Cold spraying: From process fundamentals towards advanced applications. Surf Coat Technol 268:77–84. https://doi.org/10.1016/j.surfcoat.2014.09.060

Hall AC, Brewer LN, Roemer TJ (2008) Preparation of aluminum coatings containing homogenous Nanocrystalline microstructures using the cold spray process. J Therm Spray Technol 17:352–359. https://doi.org/10.1007/s11666-008-9180-6CrossRef

Irissou E, Legoux J-G, Arsenault B, Moreau C (2007) Investigation of al-Al2O3 cold spray coating formation and properties. J Therm Spray Technol 16:661–668. https://doi.org/10.1007/s11666-007-9086-8CrossRef

Irissou E, Legoux J-G, Ryabinin AN et al (2008) Review on cold spray process and technology: part I – intellectual property. J Therm Spray Technol 17:495–516. https://doi.org/10.1007/s11666-008-9203-3CrossRef

Ji G-C, Wang H-T, Chen X et al (2013) Characterization of cold-sprayed multimodal WC-12Co coating. Surf Coat Technol 235:536–543. https://doi.org/10.1016/j.surfcoat.2013.08.021CrossRef

Jodoin B, Richer P, Bérubé G et al (2007) Pulsed-gas dynamic spraying: process analysis, development and selected coating examples. Surf Coat Technol 201:7544–7551. https://doi.org/10.1016/j.surfcoat.2007.02.033CrossRef

Juha Lagerbom, Heli Koivuluoto, Jussi Larjo, et al (2007) Comparison of coatings prepared by two different cold spray processes

Jung K, Song W, Chun D-M et al (2010) Nickel line patterning using silicon supersonic micronozzle integrated with a nanoparticle deposition system. Jpn J Appl Phys 49.:05EC09. https://doi.org/10.1143/JJAP.49.05EC09

Kashirin A, Klyuev O, Buzdygar T, Shkodkin A (n.d.) Modern applications of the low pressure cold spray. http://dymet.info/en/app.html. Accessed 9 Sept 2017

Kim D-Y, Park J-J, Lee J-G et al (2013) Cold spray deposition of copper electrodes on silicon and glass substrates. J Therm Spray Technol 22:1092–1102. https://doi.org/10.1007/s11666-013-9953-4CrossRef

King PC, Zahiri S, Jahedi M, Friend J (2010) Aluminium coating of lead zirconate titanate – a study of cold spray variables. Surf Coat Technol 205:2016–2022. https://doi.org/10.1016/j.surfcoat.2010.08.084CrossRef

King PC, Poole AJ, Horne S et al (2013) Embedment of copper particles into polymers by cold spray. Surf Coat Technol 216:60–67. https://doi.org/10.1016/j.surfcoat.2012.11.023CrossRef

Krömer W (2012) Overview of the global thermal spray market and trends in Europe. Weld Cut:377

Kulmala M, Vuoristo P (2008) Influence of process conditions in laser-assisted low-pressure cold spraying. Surf Coat Technol 202:4503–4508. https://doi.org/10.1016/j.surfcoat.2008.04.034CrossRef

Lee HY, Yu YH, Lee YC et al (2004a) Interfacial studies between cold-sprayed WO3, Y2O3 films and Si substrate. Appl Surf Sci 227:244–249. https://doi.org/10.1016/j.apsusc.2003.11.073CrossRef

Lee HY, Yu YH, Lee YC et al (2004b) Cold spray of SiC and Al2O3 with soft metal incorporation: a technical contribution. J Therm Spray Technol 13:184–189. https://doi.org/10.1361/10599630419355CrossRef

Lee HY, Jung SH, Lee SY et al (2005) Correlation between Al2O3 particles and interface of al–Al2O3 coatings by cold spray. Appl Surf Sci 252:1891–1898. https://doi.org/10.1016/j.apsusc.2005.03.148CrossRef

Lee JH, Jang HL, Lee KM et al (2013) In vitro and in vivo evaluation of the bioactivity of hydroxyapatite-coated polyetheretherketone biocomposites created by cold spray technology. Acta Biomater 9:6177–6187. https://doi.org/10.1016/j.actbio.2012.11.030CrossRef

Lefebvre L-P, Banhart J, Dunand DC (2008) Porous metals and metallic foams: current status and recent developments. Adv Eng Mater 10:775–787. https://doi.org/10.1002/adem.200800241CrossRef

Li C-J, Yang G-J, Gao P-H et al (2007) Characterization of nanostructured WC-co deposited by cold spraying. J Therm Spray Technol 16:1011–1020. https://doi.org/10.1007/s11666-007-9096-6CrossRef

Liu J, Zhou X, Zheng X et al (2012) Tribological behavior of cold-sprayed nanocrystalline and conventional copper coatings. Appl Surf Sci 258:7490–7496. https://doi.org/10.1016/j.apsusc.2012.04.070 CrossRef

Luan Y, Xue Y-W, Shi Z-G (2012) Synthesis of hierarchically macro/meso/microporous carbon spheres and its application in fast rechargeable electric double layer capacitor. Mater Lett 88:30–32. https://doi.org/10.1016/j.matlet.2012.08.046 CrossRef

Lupoi R, O’Neill W (2010) Deposition of metallic coatings on polymer surfaces using cold spray. Surf Coat Technol 205:2167–2173. https://doi.org/10.1016/j.surfcoat.2010.08.128 CrossRef

Marx S, Paul A, Köhler A, Hüttl G (2006) Cold spraying: innovative layers for new applications. J Therm Spray Technol 15:177–183. https://doi.org/10.1361/105996306X107977

Melendez NM, McDonald AG (2013) Development of WC-based metal matrix composite coatings using low-pressure cold gas dynamic spraying. Surf Coat Technol 214:101–109. https://doi.org/10.1016/j.surfcoat.2012.11.010 CrossRef

Moridi A, Hassani-Gangaraj SM, Guagliano M, Dao M (2014) Cold spray coating: review of material systems and future perspect. Surf Eng 36:369–395

Neil Matthews (2012) Cold Spray Applications for the Australian Defence Department

Ning X-J, Jang J-H, Kim H-J (2007) The effects of powder properties on in-flight particle velocity and deposition process during low pressure cold spray process. Appl Surf Sci 253:7449–7455. https://doi.org/10.1016/j.apsusc.2007.03.031 CrossRef

Ogawa K, Ito K, Ichimura K et al (2008) Characterization of low-pressure cold-sprayed aluminum coatings. J Therm Spray Technol 17:728–735. https://doi.org/10.1007/s11666-008-9254-5 CrossRef

Olakanmi EO (2016) Optimization of the quality characteristics of laser-assisted cold-sprayed (LACS) aluminum coatings with Taguchi Design of Experiments (DOE). Mater Manuf Process 31:1490–1499. https://doi.org/10.1080/10426914.2014.984306 CrossRef

Olakanmi EO, Tlotleng M, Meacock C et al (2013) Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) al-12 wt.%Si coatings: effects of laser power. JOM 65:776–783. https://doi.org/10.1007/s11837-013-0611-6 CrossRef

Papyrin AN (2006) Cold spray: state of the art and applications. ENISE, St-Etienne

Papyrin A, Kosarev V, Klinkov S et al (2007) Chapter 1 – discovery of the cold spray phenomenon and its basic features. In: Cold spray technology. Elsevier, Oxford, pp 1–32

Petri Vuoristo (2015) CGS Low Pressure Case Studies on Industrial Sectors

Pialago EJT, Kwon OK, Park CW (2013) Nucleate boiling heat transfer of R134a on cold sprayed CNT–cu composite coatings. Appl Therm Eng 56:112–119. https://doi.org/10.1016/j.applthermaleng.2013.03.046 CrossRef

Raoelison RN, Aubignat E, Planche M-P et al (2016) Low pressure cold spraying under 6 bar pressure deposition: exploration of high deposition efficiency solutions using a mathematical modelling. Surf Coat Technol 302:47–55. https://doi.org/10.1016/j.surfcoat.2016.05.068 CrossRef

Richer P, Jodoin B, Ajdelsztajn L, Lavernia EJ (2006) Substrate roughness and thickness effects on cold spray Nanocrystalline al-mg coatings. J Therm Spray Technol 15:246–254. https://doi.org/10.1361/105996306X108174 CrossRef

Robitaille F, Yandouzi M, Hind S, Jodoin B (2009) Metallic coating of aerospace carbon/epoxy composites by the pulsed gas dynamic spraying process. Surf Coat Technol 203:2954–2960. https://doi.org/10.1016/j.surfcoat.2009.03.011 CrossRef

Roman Gr. Maev, Emil Strumban, Volf Leshchinskiy, Dmitry Dzhurinskiy (2014) Repair applications of the LPCS process

Ryan G, Pandit A, Apatsidis DP (2006) Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials 27:2651–2670. https://doi.org/10.1016/j.biomaterials.2005.12.002 CrossRef

Sanpo N, Tan ML, Cheang P, Khor KA (2008) Antibacterial property of cold-sprayed HA-ag/PEEK coating. J Therm Spray Technol 18:10–15. https://doi.org/10.1007/s11666-008-9283-0 CrossRef

Sansoucy E, Marcoux P, Ajdelsztajn L, Jodoin B (2008) Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process. Surf Coat Technol 202:3988–3996. https://doi.org/10.1016/j.surfcoat.2008.02.017 CrossRef

Schwenk A (2012) Integration of the kinetic-systems into the sulzer-product portfolio. Erding, Schweiz

Seo D, Sayar M, Ogawa K (2012) SiO2 and MoSi2 formation on Inconel 625 surface via SiC coating deposited by cold spray. Surf Coat Technol 206:2851–2858. https://doi.org/10.1016/j.surfcoat.2011.12.010 CrossRef

Sova A, Klinkov S, Kosarev V et al (2013) Preliminary study on deposition of aluminium and copper powders by cold spray micronozzle using helium. Surf Coat Technol 220:98–101. https://doi.org/10.1016/j.surfcoat.2012.09.036 CrossRef

Thurston SH (1900) Method of impacting one metal upon another

Wang F, Zhang D, Zheng S, Qi B (2010) Characteristic of cold sprayed catalytic coating for hydrogen production through fuel reforming. Int J Hydrog Energy 35:8206–8215. https://doi.org/10.1016/j.ijhydene.2009.12.087 CrossRef

Wang Y-Y, Liu Y, Li C-J et al (2011) Investigation on the electrical properties of vacuum cold sprayed SiC-MoSi2 coatings at elevated temperatures. J Therm Spray Technol 20:892–897. https://doi.org/10.1007/s11666-011-9635-z CrossRef

Wang Y-Y, Liu Y, Li C-J et al (2012) Electrical and mechanical properties of nano-structured TiN coatings deposited by vacuum cold spray. Vacuum 86:953–959. https://doi.org/10.1016/j.vacuum.2011.06.026 CrossRef

Wang W, Burgueño R, Hong J-W, Lee I (2013) Nano-deposition on 3-D open-cell aluminum foam materials for improved energy absorption capacity. Mater Sci Eng A 572:75–82. https://doi.org/10.1016/j.msea.2013.02.032 CrossRef

Xia K, Gao Q, Jiang J, Wang H (2013) An unusual method to prepare a highly microporous carbon for hydrogen storage application. Mater Lett 100:227–229. https://doi.org/10.1016/j.matlet.2013.03.026 CrossRef

Xu Y, Hutchings IM (2006) Cold spray deposition of thermoplastic powder. Surf Coat Technol 201:3044–3050. https://doi.org/10.1016/j.surfcoat.2006.06.016 CrossRef

Yandouzi M, Sansoucy E, Ajdelsztajn L, Jodoin B (2007) WC-based cermet coatings produced by cold gas dynamic and pulsed gas dynamic spraying processes. Surf Coat Technol 202:382–390. https://doi.org/10.1016/j.surfcoat.2007.05.095 CrossRef

Yandouzi M, Richer P, Jodoin B (2009) SiC particulate reinforced al–12Si alloy composite coatings produced by the pulsed gas dynamic spray process: microstructure and properties. Surf Coat Technol 203:3260–3270. https://doi.org/10.1016/j.surfcoat.2009.04.001 CrossRef

Yang G-J, Li C-J, Fan S-Q et al (2007) Influence of annealing on Photocatalytic performance and adhesion of vacuum cold-sprayed nanostructured TiO2 coating. J Therm Spray Technol 16:873–880. https://doi.org/10.1007/s11666-007-9109-5 CrossRef

Yang G-J, Li C-J, Liao K-X et al (2011) Influence of gas flow during vacuum cold spraying of nano-porous TiO2 film by using strengthened nanostructured powder on performance of dye-sensitized solar cell. Thin Solid Films 519:4709–4713. https://doi.org/10.1016/j.tsf.2011.01.021 CrossRef

Yang G-J, Liao K-X, Li C-J et al (2012) Formation of pore structure and its influence on the mass transport property of vacuum cold sprayed TiO2 coatings using strengthened nanostructured powder. J Therm Spray Technol 21:505–513. https://doi.org/10.1007/s11666-012-9741-6 CrossRef

Yao J, Yang L, Li B, Li Z (2015) Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray. Appl Surf Sci 330:300–308. https://doi.org/10.1016/j.apsusc.2015.01.029 CrossRef

Zhang D, Shipway PH, McCartney DG (2005) Cold gas dynamic spraying of aluminum: the role of substrate characteristics in deposit formation. J Therm Spray Technol 14:109–116. https://doi.org/10.1361/10599630522666 CrossRef

Zhang Q, Li C-J, Li C-X et al (2008) Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying. Surf Coat Technol 202:3378–3384. https://doi.org/10.1016/j.surfcoat.2007.12.028 CrossRef

Zhang YY, Wu XK, Cui H, Zhang JS (2011) Cold-spray processing of a high density Nanocrystalline aluminum alloy 2009 coating using a mixture of as-atomized and as-Cryomilled powders. J Therm Spray Technol 20:1125–1132. https://doi.org/10.1007/s11666-011-9652-y CrossRef

Zhou X, Mohanty P (2012) Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in hanks’ solution. Electrochim Acta 65:134–140. https://doi.org/10.1016/j.electacta.2012.01.018 CrossRef

Zhou XL, Chen AF, Liu JC et al (2011) Preparation of metallic coatings on polymer matrix composites by cold spray. Surf Coat Technol 206:132–136. https://doi.org/10.1016/j.surfcoat.2011.07.005 CrossRef

Titel: Coeval Cold Spray Additive Manufacturing Variances and Innovative Contributions
verfasst von: Rija Nirina Raoelison
Verlag: Springer International Publishing
Buch: Cold-Spray Coatings
Print ISBN: 978-3-319-67182-6

Electronic ISBN: 978-3-319-67183-3

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-67183-3_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht