nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

01.07.2013 | Discussion

Comment on “Point Load Test on Meta-Sedimentary Rocks and Correlation to UCS and BTS” by Diyuan Li and Lous Ngai Yuen Wong, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-012-0299-x

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 4/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Excerpt

I carefully read the technical note entitled “Point Load Test on Meta-Sedimentary Rocks and Correlation to UCS and BTS” by Diyuan Li and Lous Ngai Yuen Wong, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-012-0299-x. The paper aims to establish the relationship between point load strength and uniaxial compressive and indirect tensile strength of meta-sedimentary rocks. I think the study is valuable for application of the point load test in practice, since the test is cheap, easy, accessible, and simple in comparison with the uniaxial compressive strength (UCS) and Brazilian tensile strength (BTS) tests. However, I would like to make some comments on both the dataset and data analysis process used. …

Vorheriger Artikel Simultaneous Effects of Joint Spacing and Orientation on TBM Cutting Efficiency in Jointed Rock Masses

Nächster Artikel Reply to Comment by Saffet Yagiz on “Point Load Test on Meta-Sedimentary Rocks and Correlations to UCS and BTS” by Diyuan Li and Louis Ngai Yuen Wong, Rock Mechanics and Rock Engineering, doi:10.1007/s00603-012-0299-x

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bieniawski ZT (1975) The point-load test in geotechnical practice. Eng Geol 9(1):1–11CrossRef

Broch E, Franklin JA (1972) The point-load strength test. Int J Rock Mech Min Sci Geomech Abstr 9(6):669–697CrossRef

Brook N (1985) The equivalent core diameter method of size and shape correction in point load testing. Int J Rock Mech Min Sci Geomech Abstr 22(2):61–70CrossRef

Chau KT, Wong RHC (1996) Uniaxial compressive strength and point load strength of rocks. Int J Rock Mech Min Sci Geomech Abstr 33(2):183–188

Das BM (1985) Evaluation of the point load strength for soft rock classification. In: Proceedings of the 4th International Conference on Ground Control in Mining, Morgantown, WV, July 1985, pp 220–226

Forster IR (1983) The influence of core sample geometry on the axial point-load test. Int J Rock Mech Min Sci Geomech Abstr 20(6):291–295CrossRef

Hassani FP, Scoble MJ, Whittaker BN (1980) Application of the point load index test to strength determination of rock and proposals for a new size-correction chart. In: Proceedings of the 21st U.S. Symposium on Rock Mechanics (USRMS), Rolla, MO, May 1980, pp 543–553

Hawkins AB, Olver JAG (1986) Point load tests: correlation factor and contractual use. An example from the Corallian at Weymouth. In: Hawkins AB (ed) Site investigation practice: assessing BS 5930. Geological Society, London, pp 269–271

International Society for Rock Mechanics (ISRM) (1985) Suggested method for determining point load strength: ISRM Commission on Testing Methods. Int J Rock Mech Min Sci Geomech Abstr 22(4):112

Ma GW, Wu W (2010) Water saturation effects on sedimentary rocks. Civil Engineering Research, No. 23/2010, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, pp 129–131

O’Rourke JE (1988) Rock index properties for geoengineering design in underground development. SME reprint 88–48, 5 pp

Read JRL, Thornton PN, Regan WM (1980) A rational approach to the point load test. In: Proceedings of the 3rd Australia–New Zealand Conference on Geomechanics, Wellington, New Zealand, May 1980, vol 2, pp 35–39

Rusnak JA, Mark C (1999) Using the point load test to determine the uniaxial compressive strength of coal measure rock. In: Proceedings of the 19th International Conference on Ground Control in Mining, Morgantown, WV, August 2000, pp 362–371

Singh VK, Singh DP (1993) Correlation between point load index and compressive strength for quartzite rocks. Geotech Geol Eng 11:269–272CrossRef

Singh TN, Kainthola A, Venkatesh A (2012) Correlation between point load index and uniaxial compressive strength for different rock types. Rock Mech Rock Eng 45(2):259–264CrossRef

Smith HJ (1997) The point load test for weak rock in dredging applications. Int J Rock Mech Min Sci 34(3–4):295.e1–295.e13

Tsiambaos G, Sabatakakis N (2004) Considerations on strength of intact sedimentary rocks. Eng Geol 72(3–4):261–273CrossRef

Vallejo LE, Walsh RA, Robinson MK (1989) Correlation between unconfined compressive and point load strengths for Appalachian rocks. In: Proceedings of the 30th U.S. Symposium on Rock Mechanics (USRMS), Morgantown, WV, June 1989, pp 461–468

Titel: Comment on “Point Load Test on Meta-Sedimentary Rocks and Correlation to UCS and BTS” by Diyuan Li and Lous Ngai Yuen Wong, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-012-0299-x
Publikationsdatum: 01.07.2013
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 4/2013
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-013-0417-4

Springer Professional

Excerpt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2013

Experimental Testing of Rockfall Barriers Designed for the Low Range of Impact Energy

An Investigation of Discontinuity Roughness Scale Dependency Using High-Resolution Surface Measurements

Simultaneous Effects of Joint Spacing and Orientation on TBM Cutting Efficiency in Jointed Rock Masses

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Probabilistic Analysis of Fracture Reactivation Associated with Deep Underground CO2 Injection

Development of Predictive Models for the Specific Energy of Circular Diamond Sawblades in the Sawing of Granitic Rocks