nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

2. Comparative Studies on Dry and Wet Milling: Uncovering the Secrets of Material Processing

verfasst von : Rayappa Shrinivas Mahale, V. Shamanth, P. C. Sharath, Krishnamurthy Goggi, V. Mahesh

Erschienen in: Mechanically Alloyed Novel Materials

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Within this book chapter, our primary objective is to undertake an in-depth examination of material processing techniques, with a dedicated focus on the specialized domains of dry and wet milling. Throughout this meticulous exploration, we endeavor to elucidate the intricacies of these methodologies by emphasizing technical and process parameters, thereby shedding light on their respective advantages and drawbacks. Dry milling, a fundamental facet of this analysis, necessitates a detailed examination of crucial parameters such as particle size distribution, feedstock moisture content, milling time, and the utilization of various milling equipment. The intricate interplay of these factors, when harnessed effectively, can yield fine-tuned control over particle size reduction and enhance the efficiency of dry milling processes across various applications. Conversely, the wet milling approach compels us to delve into a distinct set of technical parameters encompassing slurry rheology, milling media selection, agitation speed, and residence time. Understanding these parameters enables the optimization of wet milling processes, facilitating the disintegration of particulate matter in a liquid environment and permitting the extraction of valuable compounds with precision. Through this rigorous investigation, we aspire to provide readers with a comprehensive resource for gaining a profound understanding of these material processing techniques. Moreover, we aim to uncover the intricacies that remain concealed beneath the surface of these captivating approaches, elucidating their profound relevance in a multitude of industrial sectors by means of a meticulous examination of technical and process parameters.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Mechanism of Ball Milling and the Factors Affecting the Process of Milling

Nächstes Kapitel Advanced Characterization of Mechanically Alloyed Powders

Shashanka, R., Chaira, D.: Phase transformation and microstructure study of nanostructured austenitic and ferritic stainless steel powders prepared by planetary milling Powder Technol. 259, 125–136 (2014)

Shashanka, R., Chaira, D.: Development of nano-structured duplex and ferritic stainless steel by pulverisette planetary milling followed by pressureless sintering. Mater CharactCharact 99, 220–229 (2015)CrossRef

Shashanka, R., Chaira, D.: Optimization of milling parameters for the synthesis of nanostructured duplex and ferritic stainless steel powders by high energy planetary milling. Powder Technol. 278, 35–45 (2015)CrossRef

Shashanka, R., Chaira D., Kumara Swamy, B.E.: Electrocatalytic response of duplex and yittria dispersed duplex stainless steel modified carbon paste electrode in detecting folic acid using cyclic voltammetry. Int. J. Electrochem. Sci. 10, 5586–5598 (2015)

Gupta, S., Shashanka, R., Chaira, D.: Synthesis of nano-structured duplex and ferritic stainless steel powders by planetary milling: an experimental and simulation study. In: 4th National Conference on Processing and Characterization of Materials. IOP Conf. Ser. Mater. Sci. Eng. 75, 012033 (2015)

Shashanka, R., Chaira, D.: Effects of nano-Y₂O₃ and sintering parameters on the fabrication of PM duplex and ferritic stainless steels. Acta Metall. Sin. (Engl. Lett.) 29, 58–71 (2016)

Nayak, A.K., Shashanka, R., Chaira, D.: Effect of nanosize yittria and tungsten addition to duplex stainless steel during high energy planetary milling. In: 5th National Conference on Processing and Characterization of Materials. IOP Conf. Ser. Mater. Sci. Eng. 115, 012008 (2016)

Shashanka, R., Chaira, D., Chakravarty, D.: Fabrication of nano-yttria dispersed duplex and ferritic stainless steels by planetary milling followed by spark plasma sintering and non-lubricated sliding wear behaviour study. J. Mater. Sci. Eng. B 6(5–6), 111–125 (2016)

Shashanka, R., Chaira, D.: Effect of sintering temperature and atmosphere on nonlubricated sliding wear of nano-yttria dispersed and yttria free duplex and ferritic stainless steel fabricated by powder metallurgy. Tribol. Trans.. Trans. 60, 324336 (2017)

10.

Shashanka, R.: Synthesis of nano-structured stainless steel powder by mechanical alloying an overview. Int. J. Sci. Eng. Res. 8, 588594 (2017)

11.

Shashanka, R., Chaira, D., Kumara Swamy, B.E.: Effect of Y₂O₃ nanoparticles on corrosion study of spark plasma sintered duplex and ferritic stainless steel samples by linear sweep voltammetric method. Arch. Metall. Mater. 63, 749–763 (2018)

12.

Shashanka, R.: Non-lubricated dry sliding wear behavior of spark plasma sintered nanostructured stainless steel. J. Mater. Environ. Sci. 10(8), 767–777 (2019)

13.

Shashanka, R., Uzun, O., Chaira, D.: Synthesis of nano-structured duplex and ferritic stainless steel powders by dry milling and its comparison with wet milling. Arch. Metall. Mater. 65(1), 5–14 (2020)

14.

Rayappa, S.M., Shamanth, V., Sharath, P.C., Shashanka, R., Hemanth, K.: A review on spark plasma sintering of duplex stainless steels. Mater. Today: Proc. 45, 138144 (2021)

15.

Mahale, R.S., Rajendrachari, S., Vasanth, S., Krishna, H., Kapanigowda, N.S., Chikkegowda, S.P., Patil, A.: Technology and challenges in additive manufacturing of duplex stainless steels. Biointerface Res. Appl. Chem. 12(1), 1110–1119 (2022)

16.

Shashanka, R.: An overview of high-entropy alloys prepared by mechanical alloying followed by the characterization of their microstructure and various properties. Alloys 1, 116–134 (2022). https://doi.org/10.3390/alloys1020008CrossRef

17.

Pradeep, N.B., Rajath Hegde, M.M., Rajendrachari, S., Surendranathan, A.O.: Investigation of microstructure and mechanical properties of microwave consolidated TiMgSr alloy prepared by high energy ball milling. Powder Technol. 408, 117715 (2022)

18.

Rajendrachari, S., Adimule, V., Gulen, M., Khosravi, F., Somashekharappa, K.K.: Synthesis and characterization of high entropy alloy 23Fe-21Cr-18Ni-20Ti-18Mn for electrochemical sensor applications. Materials 15, 7591 (2022)CrossRefPubMedPubMedCentral

19.

Pradeep, N.B., Rajath Hegde, M.M., Rajendrachari, S., Surendranathan, A.O.: Investigation of structural and mechanical properties of Nanostructured TiMgSr alloy by cold isostatic pressing (CIP). Biointerface Res. Appl. Chem. 13(2), 118 (2023)

20.

Shashanka, R., Adimule, V.M., Jayaprakash, G.K., Pandith, A.: Electrochemical oxidation of methylene blue dye in wastewater using mechanically alloyed high entropy alloy modified carbon paste electrode using cyclic voltammetry. Mater. Res. Express 10, 054003 (2023). https://doi.org/10.1088/2053-1591/acd3d7

21.

Rajendrachari, S., Basavegowda, N., Vinaykumar, R., Narsimhachary, D., Somu, P., Lee, M.-J.: Electrocatalytic determination of methyl orange dye using mechanically alloyed novel metallic glass modified carbon paste electrode by cyclic voltammetry. Inorg. Chem. Commun. 155, 111010 (2023). https://doi.org/10.1016/j.inoche.2023.111010

22.

Mahale, R.S., Vasanth, S., Sharath, P.C., Rajendrachari, S., Narsimhachary, D., Basavegowda, N.: Electrochemical determination of ascorbic acid by mechanically alloyed super duplex stainless steel powders. Metals 13(8), 1430 (2023). https://doi.org/10.3390/met13081430

23.

Zhang, Y., Guo, Y., Chen, Y., Cao, Y., Qi, H., Yang, S.: Microstructure and mechanical properties of Al-12Si alloys fabricated by ultrasonic-assisted laser metal deposition. Materials 13(1), 126 (2019). https://doi.org/10.3390/ma13010126CrossRefPubMedPubMedCentral

24.

Zheng, X., Zhuang, X., Lei, Y., Chu, Z., Xu, J., Gao, L., Sun, X.: Corrosion behavior of the Ti–6Al–4V alloy in sulfate-reducing bacteria solution. Coatings 10(1), 24 (2019). https://doi.org/10.3390/coatings10010024CrossRef

25.

Suryanarayana, C., Froes, F.H.: Nanocrystalline titanium-magnesium alloys through mechanical alloying. J. Mater. Res. 5(9), 1880–1886 (1990). https://doi.org/10.1557/jmr.1990.1880CrossRef

26.

Prabhu, B., Suryanarayana, C., An, L., Vaidyanathan, R.: Synthesis and characterization of high volume fraction Al–Al₂O₃ nanocomposite powders by high-energy milling. Mater. Sci. Eng. A 425(1–2), 192–200 (2006). https://doi.org/10.1016/j.msea.2006.03.066CrossRef

27.

Suryanarayana, C., Al-Aqeeli, N.: Mechanically alloyed nanocomposites. Prog. Mater. Sci.. Mater. Sci. 58(4), 383–502 (2013). https://doi.org/10.1016/j.pmatsci.2012.10.001CrossRef

28.

Verma, L., Andrew, J., Sivakumar, S.M., Balaganesan, G., Vedantam, S., Dhakal, H.N.: Ballistic impact behaviour of glass/epoxy composite laminates embedded with shape memory alloy (SMA) wires. Molecules 26(1), 138 (2020). https://doi.org/10.3390/molecules26010138CrossRefPubMedPubMedCentral

29.

Suryanarayana, C., Ivanov, E., Boldyrev, V.V.: The science and technology of mechanical alloying. Mater. Sci. Eng. A 304–306, 151–158 (2001). https://doi.org/10.1016/s0921-5093(00)01465-9CrossRef

30.

Suryanarayana, C.: Mechanical alloying and milling. Prog. Mater. Sci.. Mater. Sci. 46(1–2), 1–184 (2001). https://doi.org/10.1016/s0079-6425(99)00010-9CrossRef

31.

Voltammetric determination of various food azo dyes using different modified carbon paste electrodes. Biointerface Res. Appl. Chem. 12(4), 4557–4566 (2021). https://doi.org/10.33263/briac124.45574566

32.

Mechanical and tribological characteristics of aluminium 2618 matrix composite reinforced with boron carbide. Biointerface Res. Appl. Chem. 12(4), 4544–4556 (2021). https://doi.org/10.33263/briac124.45444556

33.

Mahale, R.S., Shamanth, V., Sharath, P.C.: Review on Processing and Characterization of Duplex Stainless Steels. Lecture Notes in Mechanical Engineering, pp. 219–229 (2020). https://doi.org/10.1007/978-981-15-7557-0_20

34.

Chaoyang, C., Guangjie, G., Lingfei, L., Fei, F., Lin, L.: Effect of two-stage homogenization heat treatment on microstructure and mechanical properties of AA2060 alloy. Crystals 11(1), 40 (2020). https://doi.org/10.3390/cryst11010040CrossRef

35.

Richardson, H., Bopp, C., Ha, B., Thomas, R., Santhanam, K.S.V.: Electrodeposition from a graphene bath: a sustainable copper composite alloy in a graphene matrix. J. Compos. Sci. 5(1), 9 (2020). https://doi.org/10.3390/jcs5010009CrossRef

36.

Barro, Ó., Arias-González, F., Lusquiños, F., Comesaña, R., del Val, J., Riveiro, A., Badaoui, A., Gómez-Baño, F., Pou, J.: Improved commercially pure titanium obtained by laser directed energy deposition for dental prosthetic applications. Metals 11(1), 70 (2020). https://doi.org/10.3390/met11010070CrossRef

37.

Li, J.C.M., Feng, C.R., Rath, B.B.: Emission of dislocations from grain boundaries and its role in nanomaterials. Crystals 11(1), 41 (2020). https://doi.org/10.3390/cryst11010041CrossRef

38.

Simoncini, M., Costa, A., Fichera, S., Forcellese, A.: Experimental analysis and optimization to maximize ultimate tensile strength and ultimate elongation of friction stir welded AA6082 aluminum alloy. Metals 11(1), 69 (2020). https://doi.org/10.3390/met11010069CrossRef

39.

Cao, X., Zhu, J., Gao, F., Gao, Z.: Influence of fine grains on the bending fatigue behavior of two implant titanium alloys. Materials 14(1), 171 (2020). https://doi.org/10.3390/ma14010171CrossRefPubMedPubMedCentral

40.

Chiu, Y.C., Pan, T.A., Chen, G.M., Jiang, X.C., Bor, H.Y., Tzeng, Y.C., Lee, S.L.: The effects of a trace amount of manganese and the homogenization on the recrystallization of Al–7Mg–0.15Ti alloys. Molecules 26(1), 168 (2020). https://doi.org/10.3390/molecules26010168

41.

Wang, X., Pan, F., Sun, X., Li, Y., Zhou, J., Wang, Z., Qin, C.: Performance and mechanism of nanoporous Ni@NiO composites for RhB ultrahigh electro-catalytic degradation. Metals 13(1), 38 (2022). https://doi.org/10.3390/met13010038CrossRef

42.

Fan, X., Mi, Z., Yang, L., Su, H.: Application of DFT simulation to the investigation of hydrogen embrittlement mechanism and design of high strength low alloy steel. Materials 16(1), 152 (2022). https://doi.org/10.3390/ma16010152CrossRefPubMedPubMedCentral

43.

Contuzzi, N., Casalino, G., Boccaccio, A., Ballini, A., Charitos, I.A., Bottalico, L., Santacroce, L.: Metals biotribology and oral microbiota biocorrosion mechanisms. J. Funct. Biomater. 14(1), 14 (2022). https://doi.org/10.3390/jfb14010014CrossRefPubMedPubMedCentral

44.

Zaara, K., Daza, J., Ben Mbarek, W., Suñol, J.J.: Structural, thermal and magnetic analysis of two Fe-X-B (X = Nb, NiZr) nanocrystalline alloy. Materials 16(1), 155 (2022). https://doi.org/10.3390/ma16010155

45.

Zhang, Z., Zhang, J., Zhao, X., Cheng, X., Jiang, S., Zhang, Q.: Effects of Al-Mg on the microstructure and phase distribution of Zn-Al-Mg coatings. Metals 13(1), 46 (2022). https://doi.org/10.3390/met13010046CrossRef

46.

Saha, S., Roy, S.: Metallic dental implants wear mechanisms, materials, and manufacturing processes: a literature review. Materials 16(1), 161 (2022). https://doi.org/10.3390/ma16010161CrossRefPubMedPubMedCentral

47.

Imshinetskiy, I., Kashepa, V., Nadaraia, K., Mashtalyar, D., Suchkov, S., Zadorozhny, P., Ustinov, A., Sinebryukhov, S., Gnedenkov, S.: PEO coatings modified with halloysite nanotubes: composition, properties, and release performance. Int. J. Mol. Sci. 24(1), 305 (2022). https://doi.org/10.3390/ijms24010305CrossRefPubMedPubMedCentral

48.

Li, H., Jiang, C., Yu, Z., Wan, Y., Ma, Y., Yang, Z.: Numerical study on the progressive damage behavior of the interfacial debonding between shape memory alloy and polymer matrix. Materials 16(1), 168 (2022). https://doi.org/10.3390/ma16010168CrossRefPubMedPubMedCentral

49.

Yang, G., Xue, B., Li, Z., Zhou, G., Zhang, S., Lu, N., Wen, L., Zhang, D.: Influence of stress field and temperature field on residual stress of 2A14 aluminum alloy based on in situ SAXS method. Materials 16(1), 170 (2022). https://doi.org/10.3390/ma16010170CrossRefPubMedPubMedCentral

50.

Wu, Z., Liu, B., Wei, J., Yang, Y., Zhang, X., Deng, J.: Design of porous shape memory alloys with small mechanical hysteresis. Crystals 13(1), 34 (2022). https://doi.org/10.3390/cryst13010034CrossRef

51.

Mahale, R.S., Shamanth, V., Hemanth, K., Sharath, P.C., Shashanka, R.: Mechanical testing of spark plasma sintered materials: a review. In: 9th National Conference on Recent Developments in Mechanical Engineering [RDME 2021] (2022). https://doi.org/10.1063/5.0080183

52.

Wang, Z., Luo, J., Kuang, W., Jin, M., Liu, G., Jin, X., Shen, Y.: Strain rate effect on the thermomechanical behavior of NiTi shape memory alloys: a literature review. Metals 13(1), 58 (2022). https://doi.org/10.3390/met13010058CrossRef

53.

Zhao, D., Vdonin, N., Bezgans, Y., Radionova, L., Glebov, L.: Correlating electrode degradation with weldability of galvanized BH 220 steel during the electrode failure process of resistance spot welding. Crystals 13(1), 39 (2022). https://doi.org/10.3390/cryst13010039CrossRef

54.

Tang, L., Qian, H., Li, C., Wu, X.: Fretting fatigue test and simulation analysis of steam generator heat transfer tube. Metals 13(1), 67 (2022). https://doi.org/10.3390/met13010067CrossRef

55.

Kong, X., Dang, Z., Liu, X., Wang, M., Hou, N.: Simulation and experimental analysis of tool wear and surface roughness in laser assisted machining of titanium alloy. Crystals 13(1), 40 (2022). https://doi.org/10.3390/cryst13010040CrossRef

56.

Wei, Y., Niu, B., Liu, Q., Liu, Z., Jiang, C.: First-principles calculations of structural and mechanical properties of Cu–Ni alloys. Crystals 13(1), 43 (2022). https://doi.org/10.3390/cryst13010043CrossRef

57.

Marušáková, D., Corrêa, C.A., Aparicio, C., Libera, O., Berka, J., Vilémová, M., Gávelová, P.: The influence of high-temperature helium and the amount of revert material on the material properties of Inconel 738. Coatings 13(1), 45 (2022). https://doi.org/10.3390/coatings13010045CrossRef

58.

Shi, Y., Li, R., Lei, Z.: Influences of synthetic parameters on morphology and growth of high entropy oxide nanotube arrays. Coatings 13(1), 46 (2022). https://doi.org/10.3390/coatings13010046CrossRef

59.

Wu, J., Lin, X., Qiao, H., Zhao, J., Ding, W., Zhu, R.: Microstructural evolution and surface mechanical properties of the titanium alloy Ti-13Nb-13Zr subjected to laser shock processing. Materials 16(1), 238 (2022). https://doi.org/10.3390/ma16010238CrossRefPubMedPubMedCentral

60.

Zhang, Y., Liu, W., Liu, Y., Zhang, M., Tian, Y., Chen, L.: Research progress on corrosion behaviors and improvement methods of medical degradable Mg-based alloys. Metals 13(1), 71 (2022). https://doi.org/10.3390/met13010071CrossRef

61.

Guan, C., Yu, T., Zhao, Y., Chen, L., Chen, Y.: Repair of gear by laser cladding Ni60 alloy powder: process, microstructure and mechanical performance. Appl. Sci. 13(1), 319 (2022). https://doi.org/10.3390/app13010319CrossRef

62.

Yamazaki, K., Haga, T.: High-speed and low-load twin-roll casting of Al–5%Mg strip. Metals 13(1), 72 (2022). https://doi.org/10.3390/met13010072CrossRef

63.

Chausov, M., Pylypenko, A., Maruschak, P., Zasimchuk, V., Brezinová, J., Brezina, J., Viňáš, J.: Impact of the initial phase composition of alloys on the effects manifested by yield sites that occur on sheet aluminum alloys subjected to impact-oscillatory loading. Materials 16(1), 249 (2022). https://doi.org/10.3390/ma16010249CrossRefPubMedPubMedCentral

64.

Jiao, J., Xu, J., Jing, C., Cheng, X., Wu, D., Ru, H., Zeng, K., Sheng, L.: Effect of laser micro-texturing on laser joining of carbon fiber reinforced thermosetting composites to TC4 alloy. Materials 16(1), 270 (2022). https://doi.org/10.3390/ma16010270CrossRefPubMedPubMedCentral

65.

Du, M., Liu, B., Liu, Y., Yang, Y.: Dynamic behavior of additively manufactured FeCoCrNi high entropy alloy. Metals 13(1), 75 (2022). https://doi.org/10.3390/met13010075CrossRef

66.

Yang, S., Liang, P., Gao, F., Song, D., Jiang, P., Zhao, M., Kong, N.: The comparation of Arrhenius-type and modified Johnson-cook constitutive models at elevated temperature for annealed TA31 titanium alloy. Materials 16(1), 280 (2022). https://doi.org/10.3390/ma16010280CrossRefPubMedPubMedCentral

67.

Zhang, W., Wang, D., Chen, J., Ghassemi-Armaki, H., Carlson, B., Feng, Z.: A new perspective of post-weld baking effect on Al-steel resistance spot weld properties through machine learning and finite element modeling. J. Manuf. Mater. Process. 7(1), 6 (2022). https://doi.org/10.3390/jmmp7010006CrossRef

68.

Zhao, X., Zhong, Q., Zhai, P., Fan, P., Wu, R., Fang, J., Xiao, Y., Jiang, Y., Liu, S., Li, W.: Microstructure and wear resistance of laser-clad Ni–Cu–Mo–W–Si coatings on a Cu–Cr–Zr alloy. Materials 16(1), 284 (2022). https://doi.org/10.3390/ma16010284CrossRefPubMedPubMedCentral

69.

Gao, Y., Yang, Z., Xiao, H., Lei, Q., Liu, B., Liu, Y.: Effect of welding current on wear behavior of PTA-welded Cu₃₅Ni₂₅Co₂₅Cr₁₅ HEA coating. Coatings 13(1), 52 (2022). https://doi.org/10.3390/coatings13010052CrossRef

70.

Omarov, S., Nauryz, N., Talamona, D., Perveen, A.: Surface modification techniques for metallic biomedical alloys: a concise review. Metals 13(1), 82 (2022). https://doi.org/10.3390/met13010082CrossRef

71.

Ferreira, P.P., Carvalho, F.M., Ariza-Echeverri, E.A., Delfino, P.M., Bauri, L.F., Ferreira, A.M., Braga, A.P., Eleno, L.T.F., Goldenstein, H., Tschiptschin, A.P.: Synergism between B and Nb improves fire resistance in microalloyed steels. Metals 13(1), 84 (2022). https://doi.org/10.3390/met13010084CrossRef

72.

Arendarchuck, B.E., Mayer, A.R., de Oliveira, W.R., Pukasiewicz, A.G.M., Lourençato, L.A., Fals, H.D.C., Martínez-Cámara, E.: Effect of Ti-B grain refiners on wear and corrosion of the A332 alloy with Sr modification. Appl. Sci. 13(1), 430 (2022). https://doi.org/10.3390/app13010430CrossRef

73.

Miao, Q., Ding, W., Kuang, W., Zhou, B., Hao, T., Dai, C., Yin, Z.: Microstructure evolution and formation of gradient structures in single crystal nickel-based superalloy by surface mechanical creep-feed grinding treatment. Materials 16(1), 321 (2022). https://doi.org/10.3390/ma16010321CrossRefPubMedPubMedCentral

74.

Di Egidio, G., Tonelli, L., Morri, A., Boromei, I., Shashkov, P., Martini, C.: Influence of anodizing by electro-chemical oxidation on fatigue and wear resistance of the EV31A-T6 cast magnesium alloy. Coatings 13(1), 62 (2022). https://doi.org/10.3390/coatings13010062CrossRef

75.

Yamanaka, K., Mori, M., Onuki, Y., Sato, S., Chiba, A.: Dislocation density of electron beam powder bed fusion Ti–6Al–4V alloys determined via time-of-flight neutron diffraction line-profile analysis. Metals 13(1), 86 (2022). https://doi.org/10.3390/met13010086CrossRef

76.

Park, C., Hwang, T., Kim, G.-D., Nam, H., Kang, N.: Effect of the initial grain size on laser beam weldability for high-entropy alloys. Crystals 13(1), 65 (2022). https://doi.org/10.3390/cryst13010065CrossRef

77.

Yasui, T., Hayashi, K., Fukumoto, M.: Behaviors of micro-arcs, bubbles, and coating growth during plasma electrolytic oxidation of β-titanium alloy. Materials 16(1), 360 (2022). https://doi.org/10.3390/ma16010360CrossRefPubMedPubMedCentral

78.

Liu, X., Su, Y., Zhang, G., Wang, R., Cai, X.: Effect of longitudinal magnetic field on the microstructure and properties of A-TIG welding with different TiO₂ coating amounts. Crystals 13(1), 66 (2022). https://doi.org/10.3390/cryst13010066CrossRef

79.

Aizawa, T., Kurihara, T., Sakayori, H.: Manufacturing of aluminum alloy parts from recycled feedstock by PIG die-casting and hot stamping. Lubricants 11(1), 13 (2022). https://doi.org/10.3390/lubricants11010013CrossRef

80.

Vishwakarma, V., Kaliaraj, G.S., Amirtharaj Mosas, K.K.: Multifunctional coatings on implant materials—a systematic review of the current scenario. Coatings 13(1), 69 (2022). https://doi.org/10.3390/coatings13010069CrossRef

81.

Ghosh, M., Hendy, M., Raush, J., Momeni, K.: A phase-field model for in-space manufacturing of binary alloys. Materials 16(1), 383 (2022). https://doi.org/10.3390/ma16010383CrossRefPubMedPubMedCentral

82.

Ding, Z., Long, W., Jiu, Y., Zhong, S., Jiang, D., Liu, C., Yang, J., Qiao, J.: Formation and morphological transition of diversified eutectic structures in Ag-based brazing filler metals with Sn addition. Crystals 13(1), 68 (2022). https://doi.org/10.3390/cryst13010068CrossRef

83.

Meng, J., Chen, X., Jiang, J., Liu, L.: Investigation on anisotropic mechanical behavior of Ti-6Al-4V alloy via schmid factor and kernel average misorientation distribution. Metals 13(1), 89 (2022). https://doi.org/10.3390/met13010089CrossRef

84.

Bedolla-Becerril, E., Garcia-Guerra, J., Lopez-Morelos, V.H., Garcia-Renteria, M.A., Falcon-Franco, L.A., Martinez-Landeros, V.H., García-Villarreal, S., Flores-Villaseñor, S.E.: Tribological behaviour of Al-2024/TiC metal matrix composites. Coatings 13(1), 77 (2022). https://doi.org/10.3390/coatings13010077CrossRef

85.

Latypov, M.I., Shin, S., De Cooman, B.C., Kim, H.S.: Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel. Acta Mater. Mater. 108, 219–228 (2016). https://doi.org/10.1016/j.actamat.2016.02.001CrossRef

86.

Gibbs, P.J., De Cooman, B.C., Brown, D.W., Clausen, B., Schroth, J.G., Merwin, M.J., Matlock, D.K.: Strain partitioning in ultra-fine grained medium-manganese transformation induced plasticity steel. Mater. Sci. Eng. A 609, 323–333 (2014). https://doi.org/10.1016/j.msea.2014.03.120CrossRef

87.

Jost, N., Schmidt, I.: Friction-induced martensitic transformation in austenitic manganese steels. Wear 111(4), 377–389 (1986). https://doi.org/10.1016/0043-1648(86)90134-1CrossRef

88.

Chen, H., Guo, H., Shang, C.J.: Study on wear behaviours of 400 and 450 grade wear resistant steels. Mater. Res. Innov.Innov. 18(sup4), S4-270 (2014). https://doi.org/10.1179/1432891714z.000000000691CrossRef

89.

Rendón, J., Olsson, M.: Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear 267(11), 2055–2061 (2009). https://doi.org/10.1016/j.wear.2009.08.005CrossRef

90.

Chen, S., Ye, H., Lin, X.: Effect of rare earth and alloying elements on the thermal conductivity of austenitic medium manganese steel. Int. J. Miner. Metall. Mater. 24(6), 670–674 (2017). https://doi.org/10.1007/s12613-017-1449-7CrossRef

91.

Ge, S., Wang, Q., Wang, J.: The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines. Wear 376–377, 1097–1104 (2017). https://doi.org/10.1016/j.wear.2017.01.015CrossRef

92.

Yan, X., Hu, J., Yu, H., Wang, C., Xu, W.: Unraveling the significant role of retained austenite on the dry sliding wear behavior of medium manganese steel. Wear 476, 203745 (2021). https://doi.org/10.1016/j.wear.2021.203745CrossRef

93.

Chen, H., Zhao, D., Wang, Q., Qiang, Y., Qi, J.: Effects of impact energy on the wear resistance and work hardening mechanism of medium manganese austenitic steel. Friction 5(4), 447–454 (2017). https://doi.org/10.1007/s40544-017-0158-6CrossRef

94.

He, Z.-M., Jiang, Q.-C., Fu, S.-B., Xie, J.-P.: Improved work-hardening ability and wear resistance of austenitic manganese steel under non-severe impact-loading conditions. Wear 120(3), 305–319 (1987). https://doi.org/10.1016/0043-1648(87)90024-xCrossRef

95.

Mao, F., Wang, F., Shuang, Y., Hu, J., Chen, J.: Deformation behavior and experiments on a light alloy seamless tube via a tandem skew rolling process. Metals 10(1), 59 (2019). https://doi.org/10.3390/met10010059CrossRef

96.

Affolter, C., Thorwarth, G., Arabi-Hashemi, A., Müller, U., Weisse, B.: Ductile compressive behavior of biomedical alloys. Metals 10(1), 60 (2019). https://doi.org/10.3390/met10010060CrossRef

97.

Nacházel, J., Palán, J., Dlouhý, J., Sláma, P., Nový, Z.: Effects of rotary swaging parameters and artificial ageingsav on mechanical properties and microstructure of 2024 precipitation-hardenable aluminium alloy. Materials 13(1), 143 (2019). https://doi.org/10.3390/ma13010143CrossRefPubMedPubMedCentral

98.

Yang, X., Zhang, X., Chen, J., Wang, Z., Li, X., Zhang, X., Gao, L.: Study of hydrogen-induced plastic damage response of 7085–T7651 high-strength aluminum alloy. Metals 13(1), 40 (2022). https://doi.org/10.3390/met13010040CrossRef

99.

Yan, X., Hu, J., Wang, L., Chai, Z., Sun, W., Xu, W.: The coupled effect of thermal and mechanical stabilities of austenite on the wear resistance in a 0.2C–5Mn-1.6Si steel down to cryogenic temperatures. Wear 486–487 204116 (2021). https://doi.org/10.1016/j.wear.2021.204116

Titel: Comparative Studies on Dry and Wet Milling: Uncovering the Secrets of Material Processing
verfasst von: Rayappa Shrinivas Mahale
V. Shamanth
P. C. Sharath
Krishnamurthy Goggi
V. Mahesh
Verlag: Springer Nature Singapore
Buch: Mechanically Alloyed Novel Materials
Print ISBN: 978-981-9765-03-4

Electronic ISBN: 978-981-9765-04-1

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-981-97-6504-1_2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht