Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 1/2007

01.01.2007

Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-22Al-26Nb (At. Pct) and Ti-22Al-26Nb-5B (At. Pct)

verfasst von: C.J. Cowen, C.J. Boehlert

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 1/2007

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The effect of the addition of 5 at. pct boron on the microstructure and creep behavior of a nominally Ti-22Al-26Nb (at. pct) alloy was investigated. The boron-modified alloy contained boride needles enriched in titanium and niobium, and because to these borides, this material was considered to be a discontinuously reinforced metal matrix composite. These needle-shaped borides made up to 2 pct of the volume and were up to 158-μm long and 22-μm wide. The effect of boron on the mechanical properties was evaluated through in-situ creep testing and tensile testing at room temperature (RT) and 650 °C. Overall, the addition of 5 at. pct boron proved to be detrimental to the tensile and creep behavior. The composite exhibited a brittle failure and lower elongations-to-failure than the monolithic material. The in-situ tensile and creep experiments revealed that the deformation process initiated in the boride needles, which cracked extensively, and significantly greater primary creep strains and creep rates were exhibited by the composite.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Fußnoten
1
JEOL is a trademark of Japan Electron Optics Ltd., Tokyo.
 
Literatur
1.
Zurück zum Zitat Tamirisakandala S., Bhat R.B., Tiley J.S., Miracle D.B. (2005) Scripta Mater. 53: 1421–26CrossRef Tamirisakandala S., Bhat R.B., Tiley J.S., Miracle D.B. (2005) Scripta Mater. 53: 1421–26CrossRef
3.
Zurück zum Zitat Boehlert C.J., Cowen C.J., Tamirisakandala S., McEldowney D.J., Miracle D.B. (2006) Scripta Mater. 55:465–68CrossRef Boehlert C.J., Cowen C.J., Tamirisakandala S., McEldowney D.J., Miracle D.B. (2006) Scripta Mater. 55:465–68CrossRef
4.
Zurück zum Zitat Boehlert C.J., Majumdar B.S., Seetharaman V., Miracle D.B. (1999) Metall. Trans. A 30A: 2305–23CrossRef Boehlert C.J., Majumdar B.S., Seetharaman V., Miracle D.B. (1999) Metall. Trans. A 30A: 2305–23CrossRef
6.
Zurück zum Zitat Kestner-Weykamp H.T., Ward C.W., Broderick T.F., Kaufman M.J. (1989) Scripta Metall. 23: 1697–1702CrossRef Kestner-Weykamp H.T., Ward C.W., Broderick T.F., Kaufman M.J. (1989) Scripta Metall. 23: 1697–1702CrossRef
7.
Zurück zum Zitat Bendersky L.A., Boettinger W.J., Roytburd A. (1991) Acta Metall. Mater. 39: 1959–69CrossRef Bendersky L.A., Boettinger W.J., Roytburd A. (1991) Acta Metall. Mater. 39: 1959–69CrossRef
8.
Zurück zum Zitat C.G. Rhodes, J.A. Graves, P.R. Smith, and M.R. James: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 45-52. C.G. Rhodes, J.A. Graves, P.R. Smith, and M.R. James: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 45-52.
11.
12.
Zurück zum Zitat H. Conrad, M. Doner, and B. DeMeester: in Titanium Science and Technology, R.I. Jaffee and H.M. Burte, eds., Plenum, New York, NY, 1973, p. 969. H. Conrad, M. Doner, and B. DeMeester: in Titanium Science and Technology, R.I. Jaffee and H.M. Burte, eds., Plenum, New York, NY, 1973, p. 969.
13.
Zurück zum Zitat Nandy T.K., Mishra R.S., Banerjee D. (1993) Scripta Metall. Mater. 28: 569–74CrossRef Nandy T.K., Mishra R.S., Banerjee D. (1993) Scripta Metall. Mater. 28: 569–74CrossRef
14.
15.
Zurück zum Zitat Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A:2349–67CrossRef Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A:2349–67CrossRef
16.
Zurück zum Zitat Smith P.R., Rosenberger A., Shepard M.J., Wheeler R. (2000) J. Mater. Sci. 35: 3169–79CrossRef Smith P.R., Rosenberger A., Shepard M.J., Wheeler R. (2000) J. Mater. Sci. 35: 3169–79CrossRef
17.
Zurück zum Zitat Smith P.R., Rosenberger A., Shepard M.J. (1999) Scripta Mater. 41: 221–28CrossRef Smith P.R., Rosenberger A., Shepard M.J. (1999) Scripta Mater. 41: 221–28CrossRef
18.
Zurück zum Zitat Rhodes C.G., Smith P.R., Hanusiak W.H., Shepard M.J. (2000) Metall. Mater. Trans. A 31:2931–41 Rhodes C.G., Smith P.R., Hanusiak W.H., Shepard M.J. (2000) Metall. Mater. Trans. A 31:2931–41
19.
Zurück zum Zitat R.G. Rowe: in Titanium ’92 Science and Technology, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1993, p. 343 R.G. Rowe: in Titanium ’92 Science and Technology, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1993, p. 343
20.
Zurück zum Zitat R.G. Rowe and M. Larsen: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, pp. 364-71 R.G. Rowe and M. Larsen: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, pp. 364-71
21.
Zurück zum Zitat Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A: 2349–67CrossRef Boehlert C.J., Miracle D.B. (1999) Metall. Mater. Trans. A 30A: 2349–67CrossRef
22.
Zurück zum Zitat C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1997, pp. 795-804 C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1997, pp. 795-804
23.
Zurück zum Zitat Tang F., Nakazawa S., Hagiwara M. (2001) Mater. Sci. Eng. A 315: 147–52CrossRef Tang F., Nakazawa S., Hagiwara M. (2001) Mater. Sci. Eng. A 315: 147–52CrossRef
24.
Zurück zum Zitat Hagiwara M., Emura S., Araoka A. (2003) Mater. Sci. Forum 426–432: 1715–20 Hagiwara M., Emura S., Araoka A. (2003) Mater. Sci. Forum 426–432: 1715–20
25.
Zurück zum Zitat Yang S.J., Emura S., Hagiwara M., Nam S.W. (2003) Scripta Mater. 49: 897–902CrossRef Yang S.J., Emura S., Hagiwara M., Nam S.W. (2003) Scripta Mater. 49: 897–902CrossRef
26.
Zurück zum Zitat Hagiwara M., Emura S., Araoka A., Kong B.O., Tang F. (2003) Met. Mater. Int. 9: 265–72CrossRef Hagiwara M., Emura S., Araoka A., Kong B.O., Tang F. (2003) Met. Mater. Int. 9: 265–72CrossRef
27.
Zurück zum Zitat Emura S., Yang S.J., Hagiwara M. (2004) Metall. Mater. Trans. A 35A: 2971–79CrossRef Emura S., Yang S.J., Hagiwara M. (2004) Metall. Mater. Trans. A 35A: 2971–79CrossRef
28.
Zurück zum Zitat C.J. Cowen and C.J. Boehlert: Advanced Materials Research, Trans Tech Publications Ltd, Switzerland, Part 1, 2007, vol. 15–17, pp. 976-981. C.J. Cowen and C.J. Boehlert: Advanced Materials Research, Trans Tech Publications Ltd, Switzerland, Part 1, 2007, vol. 15–17, pp. 976-981.
29.
Zurück zum Zitat Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, ASTM, West Conshohocken, PA Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, ASTM, West Conshohocken, PA
30.
31.
Zurück zum Zitat D.R. Trinkle: Scripta Materialia, 2007, vol. 56, pp. 273–276. D.R. Trinkle: Scripta Materialia, 2007, vol. 56, pp. 273–276.
32.
Zurück zum Zitat C.J. Cowen, PhD Thesis, Michigan State University, 2006. C.J. Cowen, PhD Thesis, Michigan State University, 2006.
33.
34.
Zurück zum Zitat Gogia A.K., Nandy T.K., Muraleedharan K., Banerjee D. (1992) Mater. Sci. Eng. A 159: 73–86CrossRef Gogia A.K., Nandy T.K., Muraleedharan K., Banerjee D. (1992) Mater. Sci. Eng. A 159: 73–86CrossRef
35.
Zurück zum Zitat Boehlert C.J., Majumdar B.S., Eylon D. (1997) Key Eng. Mater. 127–131: 843–50CrossRef Boehlert C.J., Majumdar B.S., Eylon D. (1997) Key Eng. Mater. 127–131: 843–50CrossRef
36.
Zurück zum Zitat C.F. Yolton and J.H. Moll: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, p. 2755 C.F. Yolton and J.H. Moll: in Titanium ‘95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The University Press, Cambridge, United Kingdom, 1996, p. 2755
37.
Zurück zum Zitat M. Hagiwara and S. Emura: Workshop on Titanium Alloys Modified with Boron, Dayton, OH, Oct. 11–13, 2005 M. Hagiwara and S. Emura: Workshop on Titanium Alloys Modified with Boron, Dayton, OH, Oct. 11–13, 2005
Metadaten
Titel
Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-22Al-26Nb (At. Pct) and Ti-22Al-26Nb-5B (At. Pct)
verfasst von
C.J. Cowen
C.J. Boehlert
Publikationsdatum
01.01.2007
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 1/2007
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-006-9004-6

Weitere Artikel der Ausgabe 1/2007

Metallurgical and Materials Transactions A 1/2007 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.