nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

7. Conclusion

verfasst von : Panayiotis Tsokanas

Erschienen in: Fracture Analysis of Layered Beams With an Elastically Coupled Behavior and Hygrothermal Stresses

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This is the last chapter of the present book, and it provides the reader with the main conclusions of the entire work and recommendations for future research. First, in Sect. 7.1, the major findings of the thesis are summarized. Subsequently, in Sect. 7.2, the strengths of the proposed analytical model and solution are outlined. Lastly, some key aspects of the ongoing research work by our group are presented in Sect. 7.3, along with suggestions for future research steps.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Closed-Form Solution for Interfacially Cracked Layered Beams with Bending–Extension Coupling and Hygrothermal Stresses

Adamos L, Tsokanas P, Loutas T (2020) An experimental study of the interfacial fracture behavior of titanium/CFRP adhesive joints under mode I and mode II fatigue. Int J Fatigue 136:105586. https://doi.org/10.1016/j.ijfatigue.2020.105586CrossRef

Bennati S, Valvo PS (2009) An elastic interface model for mixed-mode fracture of adhesive joints [Paper presentation]. XIX Congresso AIMETA, Ancona, Italy

Bennati S, Dardano N, Valvo PS (2012) A mechanical model for FRP-strengthened beams in bending. Frat ed Integrita Strutt 6(22):39–55. https://doi.org/10.3221/igf-esis.22.06CrossRef

Bennati S, Fisicaro P, Taglialegne L, Valvo PS (2019) An elastic interface model for the delamination of bending–extension coupled laminates. Appl Sci 9(17):3560. https://doi.org/10.3390/app9173560CrossRef

Clean Sky (n.d.) Go with the flow: Clean Sky’s hybrid laminar flow control demo. https://www.cleansky.eu/go-with-the-flow-clean-skys-hybrid-laminar-flow-control-demo. Accessed 07 Mar 2021

Dadej K, Bieniaś J, Valvo PS (2020) Experimental testing and analytical modeling of asymmetric end-notched flexure tests on glass-fiber metal laminates. Metals 10(1):56. https://doi.org/10.3390/met10010056CrossRef

Du Y, Liu Y, Zhou F (2019) An improved four-parameter model on stress analysis of adhesive layer in plated beam. Int J Adhes Adhes 91:1–11. https://doi.org/10.1016/j.ijadhadh.2019.02.005CrossRef

Liu Z, Huang Y, Yin Z, Bennati S, Valvo PS (2014) A general solution for the two-dimensional stress analysis of balanced and unbalanced adhesively bonded joints. Int J Adhes Adhes 54:112–123. https://doi.org/10.1016/j.ijadhadh.2014.05.011CrossRef

Loutas T, Tsokanas P, Kostopoulos V, Nijhuis P, van den Brink WM (2021) Mode I fracture toughness of asymmetric metal-composite adhesive joints. Mater Today Proc 34(1):250–259. https://doi.org/10.1016/j.matpr.2020.03.075CrossRef

10.

Qiao P, Chen F (2011) On the compliance and energy release rate of generally-unified beam-type fracture specimens. J Compos Mater 45(1):65–101. https://doi.org/10.1177/0021998310371545CrossRef

11.

Qiao P, Wang J (2004) Mechanics and fracture of crack tip deformable bi-material interface. Int J Solids Struct 41(26):7423–7444. https://doi.org/10.1016/j.ijsolstr.2004.06.006CrossRefMATH

12.

Ševčík M, Shahverdi M, Hutař P, Vassilopoulos AP (2015) Analytical modeling of mixed-mode bending behavior of asymmetric adhesively bonded pultruded GFRP joints. Eng Fract Mech 147:228–242. https://doi.org/10.1016/j.engfracmech.2015.08.040CrossRef

13.

Tsokanas P, Loutas T (2019) Hygrothermal effect on the strain energy release rates and mode mixity of asymmetric delaminations in generally layered beams. Eng Fract Mech 214:390–409. https://doi.org/10.1016/j.engfracmech.2019.03.006CrossRef

14.

Tsokanas P, Loutas T (2022) Closed-form solution for interfacially cracked layered beams with bending–extension coupling and hygrothermal stresses. Eur J Mech A Solids 96:104658. https://doi.org/10.1016/j.euromechsol.2022.104658MathSciNetCrossRefMATH

15.

Tsokanas P, Loutas T, Kotsinis G, Kostopoulos V, van den Brink WM, Martin de la Escalera F (2020) On the fracture toughness of metal-composite adhesive joints with bending–extension coupling and residual thermal stresses effect. Compos B Eng 185:107694. https://doi.org/10.1016/j.compositesb.2019.107694CrossRef

16.

Tsokanas P, Loutas T, Kotsinis G, van den Brink WM, Nijhuis P (2021) Strain energy release rate and mode partitioning of moment-loaded elastically coupled laminated beams with hygrothermal stresses. Compos Struct 259:113237. https://doi.org/10.1016/j.compstruct.2020.113237CrossRef

17.

Tsokanas P, Loutas T, Nijhuis P (2020) Interfacial fracture toughness assessment of a new titanium-CFRP adhesive joint: an experimental comparative study. Metals 10(5):699. https://doi.org/10.3390/met10050699CrossRef

18.

Wang J, Qiao P (2004) On the energy release rate and mode mix of delaminated shear deformable composite plates. Int J Solids Struct 41(9–10):2757–2779. https://doi.org/10.1016/j.ijsolstr.2003.11.039CrossRefMATH

19.

Yokozeki T (2010) Energy release rates of bi-material interface crack including residual thermal stresses: application of crack tip element method. Eng Fract Mech 77(1):84–93. https://doi.org/10.1016/j.engfracmech.2009.09.018CrossRef

Titel: Conclusion
verfasst von: Panayiotis Tsokanas
Verlag: Springer International Publishing
Buch: Fracture Analysis of Layered Beams With an Elastically Coupled Behavior and Hygrothermal Stresses
Print ISBN: 978-3-031-17620-3

Electronic ISBN: 978-3-031-17621-0

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-17621-0_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht